Part Number Succession

Hi,
We have the following scenario and we have to map it to SAP. Please give your suggestions.
Our vendor is using SAP and hence we need to have common part numbers (our and vendors material part numbers). Our vendor changes material part number once in a quarter (some times even twice or thrice) and hence we need to create new part numbers, but there will be old part numbers and stock for this same material.
New material - abc3
old material - abc2 - stock 50
old material - abc1 - stock 20
How to map this in SAP? we dont want to do material to material transfer posting as few of our engineers will be having old part numbers. But we have to link all these materials.
Please guide.
Thanks and Regards
Pavan

Hi Afshad,
Thanks for the document. This document is really good and informative.
I did the configrations and tested its working fine.
Only limitation is we are using bar code while doing GR but in case of HERS material type we are not able to maintain the EAN number(there is no basic data screen and even we are not able to add basic data screen to HERS material type in configration) and hence this will not work.
Please advise
Thanks and Regards
Pavan

Similar Messages

What is the correct part number for dvi to vga adapter for macbook pro model A1260

Can someone tell me the Apple part number for the DVI to VGA adapter that came with a Macbook Pro model A1260? (Early 2008)
My adapter has reached the end of useful life.
Thanks!

You have a MacBook Pro 15" Early 2009 (MacBook Pro 4,1)
The Mac's port is a Dual-link DVI (VGA, Composite and S-video with adapter)
The DVI connector connects to the Dual link-DVI port,thus you need a DVI to VGA adapter.
http://eshop.macsales.com/item/Micro%20Accessories/DVIVGA/
You also can search the Apple store online for the part, but it's so basic and simple that paying more for Apple's version is just for looks.

How to find part number on Motherboard?

Hi all - I've got a G4 MDD dual 1g mac that I fear has a bad motherboard. I have done some preliminary research into buying a replacement board, which leads me to my question (2-parter):
1. Can anyone tell me how to find the part number or identify the motherboard in this computer? (so I don't buy the wrong thing)
2. Other than eBay, can someone recommend a good source for finding a replacement board?
Any info would be MUCH appreciated. Thanks in advance!

G4ce,
The part number is at the end of PCI card slot 5. It will say "APPLE COMPUTER 820-nnnn 2002" (or 2003).
820-nnnn is the part number, it'll always be 820 in the first part, but the last 4 digits can be different depending on model and manufacture date. Typical values are 1308, 1440, 1445.
If you're planning to re-use your existing processors, the new board number should match exactly.
I say"If" because you may find a complete MDD or one sold without certain parts a lot easier than the exact model number board.

R835-P56x motherboard Part number

Toshiba R835-P56X
Part number PT324U-008003
I need a motherboard but there is no part number on original motherboard. would anyone know the part number or know where i can go to find out what it is? Its a I5 systemboard
Thank you
Solved!
Go to Solution.

Portege R835-P56X (PT324U-008003)
P000542730 or P000549190
-Jerry

Mid-2010 MacBook Pro 15" 2.8 GHz Logic Board Part Number

Hi all,
I have been searching for a few hours trying to find the part number for the logic board one of my MBPs. I, unfortunately, have the Mid-2010 15" MBP with the bad GPU that results in endless kernel panics. (I also had the first Pentium chip, the pentium 60 with the floating point error in 1995 too). I upgraded the MBP to the 2.8 GHz, core i7 (2 core) processor when I ordered it in 2010.
Anyway, the apple tech guide exploded view does not show the part number for the 2.8 GHz. It only shows the part numbers for the other 3 configurations - 2.4, 2.53 and 2.66. I took the cover and discovered my my EEE code is "QAG".
I have just started trying to figure this issue out (too much time has passed and Apple will charge me to fix). I want to try and find a replacement logic board and do it myself. Does anyone have an idea what my part number is for the logic board? None of the sites I searched have a 2.8 GHz board listed just 2.66.
An alternative question - In my PC building days, some motherboards were compatible with multiple speeds of main processors. My computer model number
MC373LL/A
is the same as the 2.66GHz model. Does the 2.66 GHz logic board support the 2.8 core i7 too? I don't want to screw up and order the wrong part.
OSX Yosemite is installed.
Thanks,
Tony

http://www.powerbookmedic.com/MacBook-Pro-15-Unibody-28GHz-Core-i7-Logic-Board-p -36842.html

Part number for DVI to VGA adapter

I have a MA206LL/A 1.66 MHz Intel duo Mac Mini. The previous owner did not include the DVI VGA adapter. I am using a DVI VGA adapter from a PC. The colors on the VGA monitor are hazy, washed out, and the letters are fuzzy. I went to the Apple store to buy a DVI VGA adapter and they were not sure of the part. I called the online Apple Store and sales again was unsure and switched me to Support. They also were confused and asked me what I thought the part number might be. I understand that the Mac Mini needs a special adapter due to the DVI connecter size. Does anyone know what the correct part number is or a source for a non-Apple DVI to VGA adapter?

The Apple Store has the functional equivalent for $19. See here:
http://docs.info.apple.com/article.html?artnum=300576

What's the part number/details for the AC Adapter for a HP G61-456EE Notebook PC?

I'm based in the UAE and I have a G61-456EE Notebook PC. I need to order a replacement AC Adapter since I've misplaced mine and I can't seem to find the specific model/part number in the HP Parts Store. Can someone please advise me on which particular adapter is required for my PC and the necessary instructions on ordering one?

here is the part # for your computer, choose from two, only diffrence is 90 watt and 65 watt and both can work for you.
463958-001 SPS-65W ADPTR,
463955-001 SPS-90W PFC ADPTR,
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Satellite P300-1A8 - Part number for AC adapter

Hi.
Can anyone tell me the Part Number of the AC adapter I need to buy for my Satellite P300-1A8?
Model no: PSPCOE-01H008EN 15550/1024/1024/160G54/17W + BT/D52/L/M/W
The toshiba site doesn't list or recognise the model, CarPhone Warehouse didn't provide me with detailed documents, and the original adapter has been stolen. Failing that, can anyone provide an email address for toshiba (I am unable to phone during their office hours).
Or failing that, some general advice on a compatible adapter please, as I bought an adapter of the correct basic specification - 19V, 3.95A, (75W), 2.5/5.5mm connector (the PA3715E-1ACE) however it doesn't work. The toshiba site lists one other adapter of the same specs (the PA3468E-1AC3) but I am reluctant to risk buying it without being sure it is the correct one. I would be happy to buy a universal adapter but only a high quality one that will not be an electrical hazard.
Thanks in advance for any help.
Clare

Hi PinkPanther.
Thanks for the reply and the link. That was the part of the site where I found the AC adapter I thought I needed. I could just go ahead and buy the other one, but these are 70 so I really need it to charge the laptop correctly at that price.
My main problem is that no site is recognizing my laptop model - not Toshiba or the authorized service provider - so I can't find out the exact charger online. The second problem is that I can't phone when their help line is open between 9-6pm M-F, as these are my exact work hours and I have no mobile phone reception.
I have messaged Toshiba though their site, but I haven't received a reply, and the advantage of an email address is that I can check that it has been delivered. I will try to search for the asp now.
And, as you say, the original AC adapter would be much better all round.
Thanks, Clare

Satellite Pro P100: What is the Toshiba part number for a 2GB memory module

Unable to find any way of emailing this question so I have posted it on the forum. Sure this info should be more readily available without having to ask.
What is the Toshiba part number for a 2GB memory module for a PSPA4E-00F007. That's for a Satellite Pro P100 T2400
http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie=yes&PRODUCT_ID=115421
Crucial Memory gives me this module - is that correct?
http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304
Found this via Kingstons site - is this also correct?
http://www.dabs.com/productview.aspx?QuickLinx=4P3V
Would really appreciate some official clarification here.
Many Thanks

It must be PA3513U-1M2G. You must check if this module is compatible with your notebook model. I think so.
Anyway I recommend you to buy high quality product like Kingston modules.

What is the motherboard part number for DV3-2232TX (VZ462PA)?

My DV3-2232TX is not booting - and only flashing the Scroll and Caps Lock lights 4 times in a cycle.
From searching, this means the graphics card is broken, but it also seems it's built into the motherboard on this model.
It's out of warranty so I would rather just try and repair it myself with a replacement part, as I suspect any HP repairer will charge like a wounded bull for the service.
I can't, however, find the correct part number to order it!

Hello,
Part number 614-0305-A
Hope this helps.

Report to find a material by a mfr part number and old material number

Hi,
Is there any standard report to find a material by a mfr part number and old material number ?
For the moment, we are using MM03 to search articles by these selection criterion.
Thanks,
Julien Girard

Hi
As there is no stsndard report use the SQVI to find out the details, It is very simple , please follwo the below steps.
Use Txn SQVI, enter the Quick view field say- ZMNFR and click the create button, Enter the title in the next screen i.e Report name- Say - Manufacturer's Part No. Details, in the same screen you need to enter MARA for the data from table/database view, please leave the 1. data source as Table only and the radio button as Basis mode only. Click the tick mark , you will go to the next screen,
You will notice Quick viewer Intial screen
Open the node general material data
Select the Buttons besides the fields MARA-MATNR for material number, MARA-MFRPN for manufacturers part number, and MARA-BISMT for old material number. You can include any other field if you wish to have in your output. You will notice two check boxes against each field, one is for input screen field and the other is for outputf field. But currently you do not bother about and select both the check boxes or any other field you wish to have as input and output as well. Once selected all the fields afer clicking the check boxes save the total arrangement. and then in the same screen use the execute button or use F8 to find out your report input screen.
Now enter the Material number for which you wish to know other two details in the report and execute again you will find the report output.
Please ensure that you are maintaining both the details in material master basic data1 and purchasing view if you wish to get out output
Best regards
SAM
Edited by: samuel mendis on Apr 8, 2009 6:52 AM

On the connector block CB-68LP, there are few screw terminals. I am trying to find the maker and the part number of this screw terminal. Any help is much appreciated.

I am designing a new product to use in our environment and I am trying to go from the I/O card to the PCB eliminating the connector block. For this purpose, I need to find out the screw terminal part number as well as the makers name. Please help.

The screw terminals are made by Phoenix:
The 14 screw terminal row is P/N 18-69-33-4
The 12 screw terminal row is P/N 18-69-31-8

Hp officejet pro 8500A plus parts number

Hello.
I need to find the part number of the part, (or assembly of parts that is available). I have a printer cracked this gear and I just need to fix the printer has been switched on again. Thanks for the reply.
Info: one small part I removed so I could take a picture of a broken right gear.

Hi @RadSed ,
Thank you for visiting the HP Support Forums and Welcome. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region. They will be happy to assist you immediately.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Windows 7 64 Bit drivers for Toshiba Satellite C55-A5180 part number PSCJEU-00F001

Toshiba Satellite C55-A5180 part number PSCJEU-00F001
Drivers needed to install Windows 7 64 Bit on Satellite C55-A5180 part number PSCJEU-00F001
Edited to add new location for the video driver
Drivers where downloaded from here http://support.toshiba.com/support/modelHome?freeText=1200008363
And here
http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU&selCategory=2&selFamily=2&selS...
And here
http://support.toshiba.com/support/modelHome?freeText=1200007439
And Intel page here
Intel HD graphics driver http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
Toshiba Driver installation instructions
http://support1.toshiba-tro.de/tedd-files2/0/install-20140521160649.zip
Intel Chipset SW Installation Utility http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40216100a.exe
Intel Trusted Execution Engine Interface
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40215000b.exe
This post has the video driver - Here
Intel® Iris™ and HD graphics Driver 15.33.22.64.3621 for Windows* 7/8/8.1 64-bit
down the page you will find the driver - win64_153322.exe
Realtek Card Reader
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40217200c.exe
RealTek LAN Driver
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40215100c.exe
RealTek wireless LAN Driver
http://support.toshiba-tro.de/tools/eula/calleula.asp?ID=91194
USB3.0 Driver
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40219400c.exe
Synaptics TouchPad Driver
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40213500e.exe
After installing I had to enter the file and run from setup.exe because it did not install from the Toshiba installer, it only unzipped the file and saved it.
You may want to try this older Synaptics touch Pad Driver
http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20130730102013.zip
Toshiba Value added Package
http://support1.toshiba-tro.de/tedd-files2/0/vap-20130916115251.zip
Toshiba Service Station
http://support1.toshiba-tro.de/tedd-files2/0/sest-20130730134053.zip
Toshiba PC Health Monitor
http://support1.toshiba-tro.de/tedd-files2/0/pchm-20130730130641.zip
Toshiba HDD/SDD Alert Utility
http://support1.toshiba-tro.de/tedd-files2/0/hdsdal-20130730121320.zip
Toshiba Peakshift Control
http://support1.toshiba-tro.de/tedd-files2/0/tpsctrl-20130916091602.zip
Toshiba HW setup (Hardware setup)
http://support1.toshiba-tro.de/tedd-files2/0/thws-20130916090522.zip
Toshiba Disc Creator
http://support1.toshiba-tro.de/tedd-files2/0/dcr-20130730110923.zip
Toshiba Web Camera Application works for windows 7 or 8
http://cdgenp01.csd.toshiba.com/content/support/downloads/TC30463200A.exe
Toshiba Video Player
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc30647200a.exe
Toshiba recovery media creator
http://support1.toshiba-tro.de/tedd-files2/0/trmc-20130730133957.zip
All programs seam to work except HWsetup. Flashcards show up when using special function keys except for the volume, the volume special function keys work to turn volume up and down but you don’t see the flash cards, and of course there is no recovery partition so the recovery media creator cannot burn recovery media.
Updated to show instructions and pictures 8-24-2014
Instructions for changeing to from Windows 8 to windows 7.
INSTRUCTIONS:
First - Burn recovery media before you make any changes! -You may want or need to go back to windows 8 later-
Update BIOS to newest bios version, the C55 and possibly other models will not support CSM boot mode with the older bios versions.
Second -
Important Bios changes when changing from Windows 8 to Windows 7:
Completely shut down laptop (Shut down Windows 8 while pressing the Shift key to completely power off.) then restart computer and hold f2 when the screen goes black and wait for the bios setup utility to launch.
Select advanced, then system configuration, then boot mode
UEFI and CSM or legacy (UEFI for Windows 8 and CSM or legacy for windows 7)
For windows 7 change to CSM or Legacy mode.
Third - Also in bios setup utility select - Security, then Secure Boot, then you have to disable secure boot for windows 7.
You will need to delete all partitions before installing windows 7 this is done forth step.
Forth - Insert your windows 7 disc and select custom install, your partitions should show up - click on each one and below you will see advanced drive options, click that and you will have options to format - format each one, then delete each one. You will be left with one raw partition, select to install and windows will do the rest while installing the operating system.
Fifth - install drivers
Installation order is important:
Install chipset driver then video driver before other drivers. Then install Toshiba Value added package before other applications
-See attached pictures that show installed applications-
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****
Solved!
Go to Solution.
Attachments:
programs5.png ‏1040 KB
programs3.png ‏193 KB

That should work as well for all the models in part-number family PSCJEU. At least these, probably more..
    Satellite C55-A5104 (PSCJEU-00K00R)
    Satellite C55-A5105 (PSCJEU-00K018)
    Satellite C55-A5180 (PSCJEU-00F001)
    Satellite C55-A5190 (PSCJEU-00L001)
    Satellite C55-A5140 (PSCJEU-00K001)
    Satellite C55-A5137 (PSCJEU-036012)
    Satellite C55T-A5123 (PSCJEU-01G00Q)
-Jerry

Check HDD Part Number in Solaris 10 during System Running

Dear all,
Please help me,
I want to check the part number of HDD of Sun Fire V890 Server during system is running by the Solaris OS command. Can we check that part number of HDD by solaris OS command?
Or have other ways, except shutdown the system and unplug the HDD from the Server.
Thanks you and Regards,
Soret,

The following command will list the vendor and product ID for each disk:
iostat -EFrom [Sun Fire[tm] V890 Server, RoHS:YL - Full Components List|http://sunsolve.sun.com/handbook_private/validateUser.do?target=Systems/SunFireV890_R/components#Disks] you should be able to find the matching Manufacturing Part for a given vendor and product ID.

Part Number Succession

Similar Messages

Maybe you are looking for