Part nunbers for smf Metro cables

Does anyone know the cisco part number for the small jumper cables used to connect the Metro 1500 WCM cards together? They are anywhere from 6 inches to a foot long, mini-SC connectors on both ends.
thanks.
- Ted

found them. Their size is based on what channel card you are connecting:
Mux/DMX-Cable (R)/0,20m/Ch. 6/7/8/14/15/16/RSM>>WS-M15-51000070
Mux/DMX-Cable (R)/0,25m/Ch. 3/4/5/11/12/13>>WS-M15-51000071
Mux/DMX-Cable (R)/0,30m/Ch. 1/2/9/10>>WS-M15-51000072
Connection Cable Mux-DMX/0, 75m>>WS-M15-51000073
- Ted

Similar Messages

Nq615av - part number for screen replacement cable

Hi can anyone help?
What is the part number for screen cable fpr pavillion dv6t-2000 NQ615AV - part number for screen replacement cable . Cant find it on support page
http://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=NQ615AV
Thanks in advance

Hi,
Correct number (574554-001) is listed under PC Board section in the link which you posted.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Apple part number for Firewire power cable

I'm going to install the Sonnet Tango 2.0 card in my Beige G4 and I've noticed there is a type of floppy power connection for the card. Looking through the service manual (page 60) there is the exact cable I would need. Anybody knows where I could get a rare cable like this (one that long). Seems like its going to be finding a needle in a haystack, but with the right part number it can surely make the search easy. Thanks!

http://www.sonnettech.com/product/tango_express.html
you mean this card?
It's hard to tell from the picture, but is that the same size power plug as on a 5.25-inch hard drive? Those cables are pretty standard and you could find them at most computer supply stores. You might need a Y-splitter to chain from one of the other internal plugs if they are all in use.
Not sure if these are the correct ones or not, maybe you can find the ones that fit on this site, if one isn't long enough you can chain together two:
http://www.cablestogo.com/product.asp?cat%5fid=925&sku=27397
http://www.cablestogo.com/product.asp?cat%5fid=925&sku=20413
The floppy drive power plug is smaller I think.

What part number for storEdge power cables?

I purchased a used StorEdge cabinet like the one pictured below.
[http://imgur.com/kdnNM.png]
No cords were included. I'm wondering:
1. What part number is the external power cord? (red circle)
2. What part number(s) fit the internal power connectors
3. Would the power output of the internal connectors be sufficient/correct to distribute power to various non-sun servers?
4. What is the purpose of the connections in the blue circle
Thank you in advance for your help.

You are welcome.
This is peer to peer help forum. The only presence that HP has on it are the Admins and the Mods. Otherwise, none of us works for HP. I suggest contacting HP Customer Service to see if the part is available. I couldn't find it anywhere.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

T430u need the part number for the Sata cable

I have a t430u where the Sata cable is broken, i need the part number, I have searched around, called lenovo support (they said it was under warrenty, the say it was a bad hard drive and want $600 to replace a board) I know it is the Sata cable that clearly has 2 broken wires. how do i know, if i hold the two loose wires to the posts, the machine boots and runs, but it is way too small to solder. any help would be appreciated.
t430u, and it is the mini-sata on one end an a right angled non-sata end. I don't have a picture until i get the laptop returned from IBM.
Solved!
Go to Solution.

I believe 04W4436 is correct. In the U.S. IBM does the parts distribution.
http://www-304.ibm.com/shop/americas/webapp/wcs/stores/servlet/default/TopCategoriesDisplay?cntrfnbr...

Bluetooth module part number for pavilion dv7 4080us ?

I have a pavilion dv7 4080us. Its a great machine but am surprised not to find bluetooth. I see other machines have it and assume it is a part. I have installed bluetooth modules in other laptops pretty easily - but I cannot find a part number for this machine to order etc.

Hi:
Below is the service manual for your notebook.
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02476547/c02476547.pdf
You will need to order both the bluetooth module and the bluetooth cable. Part numbers for these are on page 21 of Chapter 3.
The installation procedure is in Chapter 4, page 82. Part numbers again listed on page 82. Looks like you have to take a lot of stuff off including the display.
Paul

Is cluster node g5 2.0 capable of being a parts machine for g5 normal serve

Is cluster node g5 2.0 capable of being a parts machine for g5 normal serve?
Is the power supply, motherboard, CPU, memory, etc the same?
I have a g5 that was taken out of service for 3 weeks and when put back in service does nothing at all when powering up....no sounds..no lights...nothing. In another thread checking the PRAM was suggested. Someone else suggested swapping out the power supply. One thing may need to another and I may need a parts machine. Will this approach work? Is a cluster node different only in case style....everything else the same?

Hi
I think you should be all right as there is a logic board variant that is common to both - 661-3153. However there are 3 different EEE codes for this part number so double check first. You could call your nearest Apple Authorized Repair Specialist and they should be able to tell you based on the Serial Numbers of both units. Typically this number will begin with CK number.
There are minor differences between the two as you have probably noticed. For example the XServe G5 comes with an optical drive whereas the Cluster Node does not. Similarly the XServe G5 has a three headed hard drive cable whereas for the cluster node its a single connector.
Hope this helps, Tony

What is the correct part number for dvi to vga adapter for macbook pro model A1260

Can someone tell me the Apple part number for the DVI to VGA adapter that came with a Macbook Pro model A1260? (Early 2008)
My adapter has reached the end of useful life.
Thanks!

You have a MacBook Pro 15" Early 2009 (MacBook Pro 4,1)
The Mac's port is a Dual-link DVI (VGA, Composite and S-video with adapter)
The DVI connector connects to the Dual link-DVI port,thus you need a DVI to VGA adapter.
http://eshop.macsales.com/item/Micro%20Accessories/DVIVGA/
You also can search the Apple store online for the part, but it's so basic and simple that paying more for Apple's version is just for looks.

Unable to capture Part 2 for exicse materials

Hi
In import Purchase order scenario I am unable to capture part 2 for excise materials
First I have created import PO. Then I did miro where I posted BED,AED,ECS,SECss
After that I did migo and captured part 1
After that while I was capturing part 2 with ref to vendor invoice I m getting an error message as
NO CENVAT AMOUNT TO BE POSTED
NO CENVAT AMOUNT TO BE REVERSED
We are using taxinj
Can u please help me out in solving this issue?
Rahul

Hi,
Once you have entered the needed information about the connection string and container, go to Object Tab and select the objects. then the Start button will enabled.
Another way to reverse engineer is to use ERD component. Refre to the Note 299067.1 in Metalink.

Satellite Pro P100: What is the Toshiba part number for a 2GB memory module

Unable to find any way of emailing this question so I have posted it on the forum. Sure this info should be more readily available without having to ask.
What is the Toshiba part number for a 2GB memory module for a PSPA4E-00F007. That's for a Satellite Pro P100 T2400
http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie=yes&PRODUCT_ID=115421
Crucial Memory gives me this module - is that correct?
http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304
Found this via Kingstons site - is this also correct?
http://www.dabs.com/productview.aspx?QuickLinx=4P3V
Would really appreciate some official clarification here.
Many Thanks

It must be PA3513U-1M2G. You must check if this module is compatible with your notebook model. I think so.
Anyway I recommend you to buy high quality product like Kingston modules.

How can I set up my Apple TV if I only have one spot for an HDMI cable.

how do I hook up my apple tv if I only have one spot for an HDMI cable.

How many different devices (DVD player, cable box, etc.) do you have besides the Apple TV to connect to your TV? If you aren't going to use any of these others, you won't need a switcher.
Also, depending on the device & what other kinds of inputs your TV might have, you may be able to hook them up to other inputs besides your only HDMI one. The quality might be lower for them, & you might have to use several cables for sound & video, but that might end up being acceptable if you use your ATV much more often than the others.

Web Dynpro Java : Failed to get deployable object part info for component

Currently we have a web dynpro java project which connects to the ABAP backend with Web Services. Everything seems fine, and when we transport to the production server via NWDI, we have the following error. Everytime we try to access the application , the error is occurred.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to get deployable object part info for component com.sie.attachmentcomp.AttachmentComp
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.getComponentDeploymentDescription(ClientComponent.java:784)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:934)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:177)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:149)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:116)
It is working properly in our development , and testing environment. Only production has this error. And one weird thing is that this particular error occurred only sometimes to some user. For example; I could not access to the application with this error yesterday but my friend can access. Today, I can access in the morning but my friend cannot. For another friend , Yesterday he can access by using IE but not by Firefox. But today Firefox is fine but not with IE. It seems crazy.
For more information, in our J2EE engine for the production server, we have 3 server nodes (clusters). And we are not sure it is the source of the problem. Is there any solution , and any way to know from the application that we are on which server?
We also go and check from the Content Administrator in Web Dynpro Console. Under our project name, in the list of Components, sometimes we can see AttachmentComp but sometimes not.
Please help us as our project is about to go-live next week.
Thanks,
Yu

Hi Meenge,
Please check below document for finding root cause for "Failed to start deployable object part info for <development component> and application <application name>"
http://help.sap.com/saphelp_nwce711core/helpdata/en/44/7716e1633a12d1e10000000a422035/frameset.htm
OR http://help.sap.com/saphelp_nw04/helpdata/EN/f4/1a1041a0f6f16fe10000000a1550b0/frameset.htm
Hope it helps
Regards
Arun

I want to use my Mac desktop as a portal for viewing my cable television via some kind of cord. Is this possible and what do I need to set this up?

I want to use my Mac desktop as a portal for viewing my cable television via some kind of cord. Is this possible and what do I need to set this up?

It can be done with analog but not digital thanks to "good 'ol" HDCP copy protection which apple (and most other manufacturers) unfortunately respect.
So you can take the analog output from your cable box (component -- 5 cables -- if it has it but generally they all have composite -- 3 cables) and feed it into some kind of converter or into some appropriate pci card for your mac pro. But none of them are going to let you directly use the HDMI output from the box to your computer.
Bottom line, no single cord is going to work and it will never be the higher quality digital picture you get on your tv.
Some qualification: There are boxes that I think support hdmi input. Look at Blackmagic. But I still don't think you can get around the HDCP from the cable box (might depend on the kind of cable box).

Windows 8.1 won't boot after VS 2013 express for windows (metro) installation

I have purchased HP Pavilion e115sm with AMD A-10 processor and 12GB of RAM notebook, installed windows 8.1 on it, i updated windows with "windows update" and installed all drivers needed. After that, i have tried to install VS 2013 express
for windows (metro). VS installation asked to restart windows after, so that some updates or whatever can be installed.
After restart, i just got windows logo with dots rotating and got stuck on that for several hours.
I turned it of after several hours, delete all partitions on disk, recreated them again and reinstalled windows with all updates. I tried to install VS again, but got same "logo screen" with rotating dots again for several hours...
Can someone help me with this?

Hi,
Would you please first check if the system can startup into Safe mode?
Then, please try the startup repair in Advanced menu after you boot your computer via installation media.
How Run "Automatic Repair" to Fix Startup Issues in Windows 8 and 8.1
http://www.eightforums.com/tutorials/2843-automatic-repair-run-windows-8-a.html
Then, if the issue still persists, try to boot PC in WinRE, and enter command prompt to run following commands:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
Detailed steps, please refer to this link:
Windows 8 Boot Issues? Try Fixing the Master Boot Record (MBR) or Boot Configuration Data (BCD)
http://www.techspot.com/guides/630-windows-8-boot-fix/
Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
Keep post.
Kate Li
TechNet Community Support

What is the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw)?

I need to find the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw).
This question was solved.
View Solution.

Good question.
That I don't have a definite 100% answer to.
It probably is OK. Wattage is what it is rated at. More wattage is probably a good thing, and I have read that = or - .5v is not supposed to be an issue.
You can do a google search of the part number for your power adapter and see if they still carry it, if you are concerned.
Paul

Part nunbers for smf Metro cables

Similar Messages

Maybe you are looking for