Part of audio no longer works

I'm running PP CS5.5 and just started experiencing a problem I've never had before. First, here's the set up:
The project: A series of talking head videos with 4 different people addressing 6 different subjects. Each video/sequence addresses a separate subject. The problem is with video/sequence #1 (introductions).
I imported the video for each speaker and cleaned up the audio in Audition. I saved the audio for each person with the exact same settings.
I then replaced the original audio with the clean audio.
I created 6 sequences, one for each topic, and edited the speakers together.
I replaced them with AE comps so they could be keyed.
In Premiere, I added titles, etc. to the linked comps.
I exported the sequences as WMV files for client review. I did this a few times. The audio was fine in all of them.
However, when I played back the last version of #1, the audio drops out for about 20 seconds. Specifically, it drops out after Ileana finishes speaking and when Alan starts speaking and continues a few seconds into Steffen's part. Once the audio comes back, it sounds fine.
This is what I've done to try to troubleshoot it.
Thinking there may be something wrong with the source file, I opened up Alan's cleaned audio and it plays fine in the source monitor. I then tried placing it into the sequence and it's really distorted. This happens no matter which audio track I place it in. If I watch in the mixer, the audio level is right around -6, so it's not being distorted due to too high of a level.
This ONLY happens with this one sequence, and it was fine until a couple of hours ago. The other 5 are fine. Any ideas?
Thanks

Do you have any audio effects on the track?

Similar Messages

Synchronize By Audio No Longer Works After 7.2 Update

After installing the Premiere Pro CC 7.2 update, the synchronize by audio no longer works correctly. When you highlight the clips and sync by audio it acts like it's doing something but then puts the clips nowhere near close being a match (usually one clip on one side of the timeline and the one on the other).
Is anyone else having this issue? I've run into it on two seperate computers bothe running Premiere Pro CC 7.2 on Windows 8.1 machines.
- Dennis

Bumping this. I'm a brand new CC subscriber and the sync function was a big part of why I moved to CC. 50% of the time it works, but the rest of the time, it pushes the video clip much farther down the timeline.
Update 1: To clarify, I am doing this from the sequence itself. So tracks A1/V1 are the original audio/video from camera, then A2 is my sound I want to sync.
It does not seem to have a problem syncing the same "problem" clips when I use the "Merge" by Audio from the Bin.
Update 2: I found that, if I unlink the original A1/V1 clip, then select all three (A1/V1/A2) and Synchronize, it works.
Obviously, this is an unacceptable workflow, but I hope that helps Adobe figure out what's going on here.

Audio no longer working after upgrade

Hi,
After doing an upgrade this morning, my audio no longer works.
Booting into KDEmod gave the first clue when I got an error message saying audio not found.
The output of alsamixer say "alsamixer: function snd_ctl_open failed for default: No such device", yet my modules have not changed in rc.conf.
Could this be related to HAL also being updated?
Thanks,
JTD

Do you by accident have more than one sound-device? I didn't lose sound but "aplay -l" showed that ALSA has changed the order of the cards. Hence I suddenly didn't get sound from where I expected it.

Beats audio no longer works

My beats audio no longer works. When I try to open beats audio control panel up, it says the cannot find startup file.! I am not sure what happend. I think it may have to do with something related to my webcam b/c the webcam no longer works, and the program you cam does not open up. My laptop is dv76b55dx.This my info: A1T53UA#ABA - Product number, If you can help me, I really appreciate it! Thanks
[s/n removed for privacy]

Hi,
As there is more than 1 IDT entry in Recovery Manager, cancel this and use the following method instead.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Audio no longer works with external display

Before Yosemite, I could plug my computer to a HDTV through a HDMI cable, and then hook up my audio to a stereo, so I could watch TV shows. After upgrading to Yosemite, my audio no longer work when connected to a HDTV. Any help?

OK, I just clicked restore to backup in itunes and after restoring the iphone, it seems to be connecting and working through the speakers now. Whew!

5.1 audio no longer works on Netflix and HBO Go

I've noticed recently that 5.1 audio no longer works on Netflix and HBO Go. Those are the only apps I really use, so I can't speak for any others. My receiver lights up all of the speaker lights that it normally would for 5.1 audio, but it displays "Stereo" and I'm only getting stereo sound from my speakers for anything I play from those sources. The receiver works as it is supposed to for all of my other A/V devices. I tried restarting and restoring, but the problem remains. I can't think of anything else to do.

@sean0826 -- this is why you don't use Java menus. Even javascript menus are a bad idea; you need to have a secondary menu system ANYTIME you have a menu system that requires a plugin or scripting to be active. NOT EVERYONE browses with that stuff on.
The only thing you can do for now is FTP to your site and add in static menus (like we did in the "old days" at the bottom of the page; or rip out the Java Menus and install static or CSS versions.
BTW where are you rmenus supposed to be. I have opera, safari, ff, and a few others. they all look the same. So if that's true, it's the plugin that's the problem, not safari.
In Opera Pogo.com works. java loads, the game is there. It does have some drawing issues but not surprised.
In Safair Pogo works fine. Just played a game of chess.

Microphone / Audio no longer works on my HP Pavilion DV7 Notebook PC

My microphone no longer works on my system. Everything appears ok. Got a message in the action center that says:
AMD/ATI Video Driver has stopped working properly. Help, I need to record some videos. Thanks
Rob

Hello rob4kelly,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I see that the microphone no longer works on your notebook, and I would be happy to assist you! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your notebook computer?
What version of Windows do you have installed on your computer?
Has your computer completed all of its important Windows Updates?
Have you updated your HP drivers using the HP Support Assistant?
Is this an on-going, or recent issue?
In the meantime, I recommend following this document on Using System File Checker to Restore System Files. This should help repair damaged protected files on your computer. In addition, I also suggest following this resource on Resolving Microphone and Line-in Problems (Windows 7).
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

ITunes 11.02 update - video and audio no longer working

I updated to iTunes 11.02 last night.
Now, I can't play any video or any audio files, whether using iTunes or Quicktime. Even online Vimeo and YouTube content won't play. Clicking the play button does nothing - the movie or song's progress indicator doesn't move.
In Sytem Preferences > Sound: I get the following message for input and output devices "No input device found" and "No output device found"
There doesn't seem to be a way to check if the graphics card is recognised but it's still showing up in the system profiler.
Looks like the iTunes update has completely nixed my laptop's video and audio capabilities. Does anyone have any recommendations?

I do a lot of SONY HRD FX1 native 1080i HDV capture with Final Cut Pro 5 on my PowerBook 1.3 GHz G4..
Before Apple started supporting HDV, getting the audio and video lined up was such a nightmare that it wasn't even worth working on projects.
My material works great inside FCP 5, but I have had similar problems to what you describe when making the DVDs
However, I use DVD Studio Pro and was able to move the audio relative to the video slightly to get the most important parts to line up. However if your audio and video clips aren't the same length then you will have variable slippage for long clips.
I have been using MPEG Power Professional (Heuris Inc) to do my MPEG2 video encodes as well as my audio encodes and I haven't had the problem lately.

HTTP Streaming WAV audio no longer works with quicktime 7.7.3 OSX or 7.7.5 in windows

The latest revisions of quicktime (as plugin) no longer play our webservice's streamed audio files. The audio is simply encoded wav all javascript hooks seem to work properly, but there is no resulting audio output. Reverting to previous revisions of quicktime on the same platforms restores the expected behavior.
The files are streamed over authenticated HTTPS connections and are encoded as "RIFF (little-endian) data, WAVE audio, ITU G.711 mu-law, stereo 8000 Hz". If the file is downloaded to the local machine, the quicktime player application has no problems playing the audio. Similarly, dropping a file: URL to the download into the web browser also plays correctly. The issue started with Quicktime 7.7.3 on OSX with Safari (Yosemite) and 7.7.5 on Windows (Chrome and Firefox). Mavericks and previous Windows quicktime plugins work correctly. This is especially problematic for our Mac OS clients because we have not been able to identify a current working combination or a functional downgrade path other than to downgrade the OS to Mavericks.
Any suggestions or guidance would be greatly appreciated.
Thanks!

Jon, I read. But the links to websites are not playing on a Windows7 computer. Can you tell me why they are not?
I believe that with a new dawn comes new understanding of the problem.
I do not have access to a Windows 7 computer nor do I run Windows on my Mac.
I am not a web coding programmer. However...
Neither of the original poster's links (http://openmap.bbn.com/~mthome/quicktimeaudio.html and http://openmap.bbn.com/~mthome/wavtest.wav) work because they both point to the same HTML (quicktimeaudio.html) file.
The HTML file looks like this:
This file appears to look for the QT plug-in to see if QT is installed, if the version is v7.7.6, and whether or not the WAV extension is supported.
When I click on either link, this is what I see:
Although I am running:
the browser display shown above indicates the HTML code thinks that QT is not installed rather than being the wrong version and then, instead of terminating the browser processing and displaying the correct error message, the HTML code falls through to a display of the audio media controller and automatically starts playback. Unfortunately, since confirmation of WAV playback support was skipped (or for some other reason), the QT plug-in does not access the required codec (or fails to send the data to the handler) and no audio is heard when playing the WAV audio file. In short, even though I am not a web programmer, I believe the main issue here is the coding of the HTML file.
When I "re-containered" the original poster's WAV file and posted it on my own server, I created a URL link that actually pointed to the WAV resource and not to the HTML file code as did the OP's secondary link. Thus, when I accessed the audio file, I did so directly via the plug-in, by-passing the HTML file code issue and allowing the file data to play correctly in Safari under both Yosemite and IOS 8.
Believe the HTML file needs to be re-coded to fix the problem. I can now play the original 8-bit µ-law encoded WAV file in players and Safari but believe the OP here should consider a more modern compression format/file container combination that would allow him to abandon use of the QT player plug-in to maintain compatibility with "plug-in free" browsers. For instance, would HTML5 coding be able to play AAC encoded content in MOV, MP4, M4V, and/or M4A file containers? Once again, questions like this are beyond my expertise and need to be answered by someone proficient in this area.

MacBook air 10.8.5 sound/audio no longer working on YouTube

I have seen this thread in an attempt to fix my issue:
https://discussions.apple.com/thread/5310311?start=0&tstart=0
I upgraded to 10.8.5 and now there is no way to play audio from sites like YouTube or Vevo. Audio works and the audio out jack also work but not from non-native Apple programs (like a browser)
It is unclear what caused the issue but it seems to be no longer working

YouTube might have changed the setting. Volume slider may be hidden.
Temporary fix:
Hover the mouse near the speaker icon and hold it to reveal the volume slider.
Increase the volume level.

Upgraded to Windows 10 - Sub Woofer/Beats Audio No Longer Working

Hi, Just upgraded from Windows 8.1 to 10. All seems to work fine except I no longer get sound out of my sub woofer and Beats Audio adjustments have no impact on sound. I am using the IDT High Definition Audio Codec driver. I thought I did something wrong so I reverted back to 8.1 and everything was working properly. Ran the Windows 10 upgrade again with the same results, Sub Woofer and Beats Audio not working. The On Board speakers work fine. I also did some exploring on various forums and sound issues seem to be a common problem with Windows 10. I also tried the High Defintion Audio driver and that just caused additional issues, i.e. Beats Audio and the Sub Woofer disappeared from my system. Hoping someone has found a solution. Thanks!

go to search, type "update driver manager"go to sound, "video and game controllers"right click "IDT High Definition Audio CODEC" or whatever is the audio title is.Go to Properties.go to drivers and click update driverClick browse my computer for driver softwarethen click "let me pick from a list of device..."then what i did here, is first clicked "high definition audio device"and then after that i restartedafter, the audio wasn't sounding like it use to so i redid everything from above but rather than picking "High definition Audio Device", I picked the latest "IDT High Definition Audio Codec". So far, my audio is fine and never had a problem since. Any other questions, just reply goodluck.

ENVY 810 Phoenix desktop audio no longer working

Earlier this week my audio stopped working. The computer does not seem recognize any speakers or headphones I plug in. I've tried troubleshooting and updating the driver, but nothing seems to work.

If the System Recovery and updated driver didn't fix the problem it may well be a hardware problem. The easiest way to fix this without sending your computer to HP would be a dedicated sound card. You could buy a PCI Express x1 card. I believe you have at least two of these slots on your motherboard. The card in my link is only one example. You have numerous of them to choose. Read the Customer Reviews to see what users have to say about them.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

After the last update my Audio no longer works

I have had no problems with the Apple TV 2 and my LG plasma UNTIL the last patch and now i have no audio.
I swaped the port ( my LG Plasma has 4 HMDI ports and no go yet my Playstation works fine on both ports. I have picture but no sound.
I wish Aplle had a roll back feature so you can drop back an update install.
I have turned of the power to my Apple TV 2 hoping a reset would fix this issue but no go
I have an LG 50PG30FD 50 Inch 1080P Plasma TV
Is anyone else having this issue
I have even tried a new HMDI cable
That only leaves the latest June/may Apple TV 2 update as the culprit in my book . . .
Now the Apple TV is useless made so by an Aplle update . . . I can't to my knowlefge undo .

Try changing the Audio out and Dolby Digital settings (settings/Audio & Video)

Audio No Longer Working on USB Output

Hi,
I've been using Audirvana, Bit Perfect, and other music software applications with iTunes.
Last night I unhooked the power cord and the music stopped playing. I've tried everything and anything to fix this but I am no longer getting audio out from my USB port (I've tried both ports).
When I go into Audo MIDI Setup I see my bridge (Musical Fidelity USB -> SPDIF Converter) as always. However, when I select it and "Use This Device for Sound Output" nothing happens and it doesn't change (it stays on either Airplay or Built-in Output).
In addition, I am unable to change anything on the USB Output (Master Volume, Analog 1, Analog 2...the only thing I an do is 'mute' which I don't want to do).
When I look at my Musical Fidelity Bridge and DAC it *appears* that they are getting signals - they both say 'Locked' when a signal is present.
I wonder if it's because the volume on my USB output is so low and I can't change it? See picture.
Please help! The only reason I have this MacBook Pro is to play music through my system.

Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
(60747)

HP Pavillion g6 Notebook PC - Audio no longer working after Windows 8.1 upgrade

Hi
Product Name: HP Pavillion g6 Notebook PC
Operating System: Windows 8.1 (just upgraded)
Description: There is an audio issue. Sound does not work at all. Issues include:
iTunes error message: iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly
youTube issues: a video will play for 1 second, and then display error message
THe F9/F10/F11 buttons make no changes to the Audio settings
When I click the Sound button (which is currently muted), the Playing Audio window opens stating that Troubleshooting couldn't identify the problem.
This has only occurred since I upgraded from Windows 8 to Windows 8.1 this week.
The Audio and Sound settings in HP Support Assistant are:
IDT High Definition Audio CODEC
Status: (52)
Driver: stwrt64.sys
Version: 6.10.6425.0
AMD High Definition Audio Device
Status: (52)
Driver: AtihdW86.sys
Version: 8.0.0.8808
Thanks for your help
Phil
This question was solved.
View Solution.

Hello Pipster100,
I would like to assist you with getting this audio issue resolved with your HP Pavilion g6 Notebook PC. So I can better assist you, please provide me with the model/product number from your notebook.
Also, something that you can try is to use the Recovery Manager to Restore Software and Drivers. Once you open the HP Recovery Manager, install the audio driver that will be listed under drivers.
Looking forward to your response.
Thank you,
I worked on behalf of HP.

Part of audio no longer works

Similar Messages

Maybe you are looking for