Part of illuminated apple logo "blocked"

OK this is pureply a cosmetic thing but still ...
I recently sent my powerbook in to an apple authorized service center toi have the display replaced as a big dent had been knocked into it.
PB came back with new display - there was a large, white 'pressure point 'in the middle of it (looked like it does when you push firmly on the screen) so I sent it back again. Also, when looking at the illuminated apple logo on the casing, half of the leaf of the logo was blocked out, as if something inside the casing was blocking the light shining through.
Anyway, they just called me to say they had replaced the screen again, and while there are no longer any white spots, the apple logo is still not fully illuminated, but half the leaf is still 'blocked'. They are saying Apple may have changed vendors on the screens and they are probably all made like this now, without the apple fully lighting up, seeing as this is exactly like the last one they replaced.
I know this is purely cosmetic, but does this sound right? Should I just accept that and live with it? Are they telling me the truth? Just wanted some advice if anyone has any!
Thanks!
Matt

I was kinda thinking I shouldn't accept it too. I am not that bothered about the aesthetics of the machine, only really the performance, but then again Apple are well known for their attention to the extra details in design so I would not think they would allow this. And I agree, it is basically a floored machine as far as resale is concerned.
Thanks for your input.

Similar Messages

Illuminated Apple Logo Not Fading Off

I currently own a Mid-2011 MacBook Air 13". When I originally purchased this beautiful machine, the illuminated Apple Logo on the back used to fade off when it was put to sleep. However, lately it has been abruptly shutting off without fading out even though it is going to sleep the exact same way. Even though this is not a life threatening problem, it is a little detail that has been bothering me as of lately. If anybody happens to have any answers for me, I would genuinely appreciate it.

The same is happening to mine, and I do not know since when.
I noticed that the first time I close the screen, the light just turns off, but on the open, it fades in, and if I close it again in a short period, it just fades out normally.
After a long time work, it returns to turn off the firts time.
Seems like something is clearing some buffer or something.

Illuminated Apple logo at 27" intel based imac

Hello all,
a few days ago I've watched a few seconds of a german crime story while zapping through television.
There I have seen an criminologist using a 27" imac with an illuminated apple logo swittching darker / brighter.
Does anyone know something about that?
Kind regards
Richard

Maybe it is the camera/illumination reflexion
I agree. I think it was a light refection from the lighting hitting the shiny surface of the logo.
Dave M.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Illuminated Apple logo (Aluminum MBP 15" mid-2007)

a few days ago I've discovered this... the surface still perfect when I touch it, but underneath.. the white peace of logo shaped is shifted from original placement. my MBP was not knocked, not shaken or any abused. Just use as normal. Is it possible to fix it? if so, how?

Bring it to an Apple store or AASP.

Updated my iphone and now my screen is stuck on the loading part with the apple logo! help

it wont turn off or connect to itunes or anything!

go into dfu mode and then restore with apple

A streak across apple logo during startup??

I don't know anyone posted this before, but i look through a few page cant find any solution.
i just got my iphone 3G yesterday. I discovered the Apple logo had a so-called a cut/ line/ streak across on the apple logo during the iPhone startup.
is that the normal apple logo on iphone3G or there is something wrong with mine.?
thx
Message was edited by: echean

There's already a post on this. You should do a search on this next time.
Anyway, look at the top nav of this page and then look at the first tab where there is an Apple logo. It has the same streak. Is there something wrong with this website?
No, it's part of the Apple logo so you're okay.

On startup, Apple logo disappears, replaced by block of pixels.

Just started having a bizarre issue upon startup. When the very first screen appears, the pale grey one with the clock at the bottom, the Apple logo appears only briefly, then is replaced by a block, about two inches by two inches, of random looking colored pixels. It sort of looks like "snow" on a TV screen, only not moving. Sometimes it appears immediately and I never see the Apple logo, but usually the logo appears briefly and then disappears. Machine hangs on this screen for a few seconds and then startup proceeds normally. Have booted up from a pristine administrator account I keep for troubleshooting, and the problem is still there, so I know it is system wide and not a user issue. I have booted up from an external firewire drive and the problem doesn't occur, so I know it is a problem on my hard drive, or the hard drive itself. I've booted from my OSX installer CD, and no problem. Repaired permissions, verified drive to be okay, etc.

Hi, I believe it's just a damaged image file, perhaps this one...
http://forums.macosxhints.com/archive/index.php/t-5348.html
But, I thought it was a png, or tiff, or something... lost my link on how to replace the bootup one, but perhaps...

Iphone 5 blocked at apple logo

Hello guys,
i have an iphones 5 blocked at the apple logo, i can't resotre it coz the itunes doesn't detect it, even the power button doesn't work coz it's broken to put it in recovery mode od DFU, is there any solution you have?
Thnak's

Read this:
iOS: Unable to update or restore
If the power button is broken, SOL

My iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work.

my iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work. when i get it in DFU mode and try restoring with itunes it remains the same... provider already "fixed" this problem twice with a "software update" only to get the same problem again... it just "reboots" this time it happened @ night while charging... previous time in my jacket pocket... this is the 3th time it happens, and my provider (Mobistar belgium) doesn't wish to exchange or refund my iphone witch clearly has something wrong 3 times same problem in 3 months...

imanfromsweden wrote:
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....
On belhalf of my fellow volunteers, the answer is, "We'll try our best."
My advice is to try not to treat this like it is a paid service provided by compensated professionals. Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

I was unlocking my 3g iphone with at&t's approval, on the process I reset:erase all contents and setting, iphone blocked out on me with only apple logo showing. Tried DFU mode several times but itunes still won't response(backed up before unlocking)

I was unlocking my 3g iphone with at&t's approval, on the process I reset:erase all settings and content. now my iphone blocked out(not responding) with only the apple logo. I tried DFU mode several times but itunes still not recognizing the iphone. I previously backed up before. Help...what do I d now? thanks

Hi there tifachristie,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

My ipod touch is blocked with the apple logo on the screen

How can i unblock my ipod touch? I rebooted it and has got blocked with the apple logo on the screen.
The computer does not "see" it although it is connected.

Try here:
iPhone and iPod touch: Frozen and unresponsive

Upon completing data migration to a new macbook air, I restarted the laptop as a part of the process. However, the screen is stuck in the apple logo. Is this step supposed to take such a long time? Its been about 10 hours already.

I have tried forcing a restart and the safe boot start up but its still on the same screen!

Hi GreenchiliNM,
Welcome to the Apple Support Communities! I understand that your computer is only booting to the Apple logo after running migration. You have done a great couple of troubleshooting steps already by trying a restart and trying to start in safe boot. I suggest you continue with the steps in the following article starting with the Reset the NVRAM / PRAM section and working down.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Reset the NVRAM / PRAM
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Reset the NVRAM / PRAM.
If the gray screen issue persists, go to the next section.
Thanks for reaching out,
-Joe

My 2009 iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple log

My late 2009 27" iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple logo again. This could possibly be an HD failure, but then why does Safe Mode still work and the USB install not work? Any ideas?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

MacBook Pro takes a long time to start up or hangs at gray apple logo after minor fall

I upgraded to Mavericks a few days ago. Everything was working fine until yesterday, when my MacBook Pro started taking a really long time to start up or restart.
Before upgrading I had some directory problems which I fixed with DiskWarrior. I then upgraded to Mavericks. There was also a fall that I took, which resulted in the MacBook Pro hitting on one corner and getting a minor dent (It was inside a padded messenger bag when I fell). It worked fine for a whole day, but the next day it started slowing down and getting stuck.
I run DiskWarrior again and there was more directory problems, which were fixed again. When I start the MacBook Pro from an external HD with Mac OS X 10.8, there is no delay in starting up. When I switch to the internal HD, then I get very long delays (5-10min) or hangs at the gray apple logo screen.
DiskUtility did not report any problems, neither did SMART report.
Could it be that the HD got somewhat damaged and gets stuck intermittently? Is it possible to start up OK some times and others to get stuck?
How can I check the HD? Shouldn't the SMART report indicate a problem?
Any help would be greatly appreciated as this is my main work computer!
Chris

I think that my Mac was shutdown when it fell, but I am not 100% sure.
I did perform both SMC and PRAM resets. I will also try to run maintenance scripts. Thanks for the suggestion.
It keeps on taking around 10min to restart now, but it has not frozen yet.
The other very strange thing that happens (and this was the first sign I had when it started acting up) is that Mail.app cannot connect to my IMAP servers (a host provider and Google), even though my Mac connects to the internet. I have the MacBook Pro on the same ethernet network as my home iMac, and I get mail without a problem on the iMac! So something is blocking the mail on the MacBook Pro.
This happened for the first time on Friday and after that I kept having the long delays in startup or freezes I mentioned before.
Could those two be connected?
When I use an external HD as as start up I can get mail fine.

Void AppleCare Warranty: If I Change The Apple Logo Color?

You know the Apple logo that rests on the oppisite side of the screen and lights up when the screen does?
Well, I've some people add like a color see through screen so that lit up apple logo becomes blue or green or any other color.
I'm assuming they insert the color sheet from the inside ...but i'm wondering, would this void your AppleCare warranty?

The top case is not a user-installable part. So, yes, if you take apart the screen, any damage you do will NOT be covered by your original warranty or an AppleCare Protection Plan. If you have a hard drive failure later (for example), it will be up to the technician who repairs your hard drive to determine if opening the top case affected your hard drive. If they determine that your unauthorized hardware change did have something to do with the hard drive failure, then you'll be responsible for paying for a repair.
-Doug

Part of illuminated apple logo "blocked"

Similar Messages

Maybe you are looking for