Part of image click to link

I am a newbie and need to know how to set it up so part of a
image goes to a website. I don't know what it's called to look it
up.
thank you!

"momo6256" <[email protected]> wrote in
message
news:e5mv86$esc$[email protected]..
> If I've understood, you've a picture with many smale
pictures inside, it's
> true..?and always pictures have got a link. You can
create a layer for all
> pictures, Your picture is the number one, and the small,
pic 1, pic
> 2......You
> cerate a layer for all picture, (layer 1, layer 2....)
and it's finish. Do
> you
> know how to create a link for a picture...?
An image map would be much simpler..
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

Similar Messages

Search Query Web Part thumbnail image link broken

Hello,
I have 4 farms spread across the world and I want to pull news from Farm 1 (headquarters) into farm 2, 3, and 4. In SharePoint 2007 I did this with content deployment by pushing only the news site out to the other 3 farms. However, from
reading content deployment guidelines in SP13 I feel this is no longer a supported configuration.
I am trying to use the search query web part to accomplish this now. I have a search query web part that I am using to roll up articles from SharePoint at farm 1. So far it is mostly working, the articles are pulled in and I can see
them. When I click the link it takes me from the current farm (farm 2) to farm 1 to read the article. The only problem I am having is that the rollup image does not display at farm 2, 3, or 4. I believe this is happening because the image
URL at the source is getting saved as a relative URL. Even if I try to override the relative URL to the image with an absolute URL then it just forces the URL back to a relative URL because clearly SharePoint is smarter than I am and there is no reason
I should ever want an absolute URL.
I should add that to get this working, in my search settings, I had to configure an extra content source (to farm 1).
So my question is what is the best way to handle this? Is there an option in my search configurations on farm 2 to override URL's for a particular content source? Am I even headed down the right path trying to do this with the content search
web part?
Thanks,

Hi Tom,
I have been trying to figure out what you mean when you say I am using 'Page item' instead of 'Picture'. I don't understand what you mean.
When I set up a page that will be published I have actually been using an 'Article Page' content type for the news item I want to share on all of the farms. After creating the page there is a section at the bottom for a 'Rollup Image' I specify
the URL in this rollup image but the actual image is stored in an 'Assets' Library. I have no problem with the article page itself showing up on Farm 2, just not the image. The "Rollup Image" data type is Publishing Image - "Rollup
Image is a site column created by the Publishing feature. It is used on the Page Content Type as the image for the page shown in content roll-ups such as the Content By Search web part."
Question 1: Are you saying that I need to somehow replace that rollup image field with a custom site column field?
Question 2: If I set up a new column then do I need to worry about connecting catalogs?
In your post from December 9th it sounded like you had this working in your test environment.
Question 3: Did you have it working using a different configuration there?
Question 4: If so, did it require having a separate web application just for Assets, or were you using a custom site column there?
In Farm 2, after I connected my catalog from Farm 1, I found that a Pages library at the top level of my site collection contained some strange entries. I have files in that library called
CatalogItem--1684387697
CatalogItem-364050575
Category-
Category-1211-4576
The first CatalogItem gives me an error "Sorry, something went wrong". The rest seem to contain images from Farm 1. However, news articles still are not finding those images. I suppose that is because the 'Rollup image' link is
still pointing to a different path than that connected catalog. Anyway, those items were checked out to me and were not published. I checked them in and published those Category/CatalogItem connections hoping that would work, but
that didn't help either.
When I set up my catalog in farm 1 I only checked 'Enable this library as a catalog'. None of the other fields seemed to apply since I am not publishing to a public site (Anonymous access) and also since I am not trying to tie identifiers to catalog
items (Catalog Item URL fields). Additionally when I connected to my catalog I tried "<label for="ctl00_PlaceHolderMain_connectionTypeSection_fullConnection">Integrate the catalog into my site" with the setting "</label><label
for="ctl00_PlaceHolderMain_rewriteDecisionSection_noURLRewriteRadioButton">Make URLs point to source catalog". I also tried "</label><label for="ctl00_PlaceHolderMain_connectionTypeSection_manualConnection">Connect,
but do not integrate the catalog". Both of those settings sounded like they might force catalog items to look to the source (Farm 1). Neither worked. There are a lot of other settings but none of them seem to apply to my situation.
I'm not trying to configure Navigation Hierarchy, Category Pages, or Item Pages. Maybe I need to do something with "Catalog Item URL Format", but I'm not sure what settings I should try.</label>
Questions 5,6: Do you have recommendations for my catalog/catalog connections to get this working? Obviously my current configuration is not right or else it would work, but am I even close?

Firefox open images in a new tab upon clicking the link,how to make firefox to save images in the folder upon clicking the link

firefox open images in a new tab upon clicking the link,how to make firefox to save images in the folder upon clicking the link.

You can right-click the image and use "Save Image As" to save that image.

Clicking on links to images bring up tons of random letters

whenever i click on links to images in safari or fire fire, tons of random characters appear instead of the image, and if i click download linked file it saves it as file.jpg.html. recently installed lightroom and adobe acrobat
ÿØÿà JFIF HHÿÛC ÿÛC ÿÀ " ÿÄ ÿÄµ } !1A Qa "q 2‘¡ #B±Á RÑð$3br‚ %&'()*456789:CDEFGHIJSTUVWXYZcdefghijstuvwxyzƒ„…†‡ˆ‰Š’“”•–—˜™š¢£¤¥¦§¨©ª²³´µ¶·¸¹ ºÂÃÄÅÆÇÈÉÊÒÓÔÕÖ×ØÙÚáâãäåæçèéêñòóôõö÷øùúÿÄ ÿÄµ w !1 AQ aq "2 B‘¡±Á #3Rð brÑ $4á%ñ &'()*56789:CDEFGHIJSTUVWXYZcdefghijstuvwxyz‚ƒ„…†‡ˆ‰Š’“”•–—˜™š¢£¤¥¦§¨©ª²³´µ¶·¸¹º ÂÃÄÅÆÇÈÉÊÒÓÔÕÖ×ØÙÚâãäåæçèéêòóôõö÷øùúÿÚ ?ù¿8 Þ³® ï ¥_‹æ‰˜r3YÓ·Îkç©èzX×î 9<zúÖ ¡(‰\’F+nf ›½¸ ÉxŽëË ©_cÌ£ i åÌž}É$ñÔÕG›–sø})ÌÄFÇŒ±ëTç í@s¸óT‘ë -²"ÙåTvâ¥º}Í·°â«‘¸â´DÜ „pã¹ª³ËÆ Ks"îÛÙj”’ 8 b 9Ú? k± /SQÊß7N>µ¢3 ÞúTŒý¿ †2BÓ”ƒÉõ ÑŠâ¬M7Êƒ°ªJÛ°§ ÈïÇzV ì‹Ë&b Ç¥tž ‡í:Ü çl1ú×' œ{Wià"!iå8 †2k ÚAØÞ“¼‘Ðê ïV Ò ùVUïüƒÔ· Ü WnçQ¹O Tþµ“©I·L¶ Ãn-\ŽÈÖO©jÁÂÂ u.kwXÛod! ` rzeÆû‹UÎC k¡ñtë P äíÆ)Ê>úF‘—¸Í† åï$ÀÏ\ñíW§¶Ù¨HÄpKþ ¡øetBNW’ -ÏµjêÛaž Çß14‡?Zä›~ÕšAè„ø{¹|ShHÝÉæ½óáÃ‘ñ›DÎRyÖ^:úÿJñO…°‰µÿ3ºFxüE{'Â÷i¾?x~6 ‚6p¼ñ±«’®µ>F‰žÍâéÄþ;ñ •}@Zï4ø—TøPó²ÐLŒ ØŽy¶¿p’ü[ÔdûªÊ##±ã ê~ ·7? 5‹'p|Èr¿¨ªŽí ³Í5I…ž…3•ÌW¯lÞ 2ðJ£ÿ Õ¡ÿ„ Áñ Äš…¼‘ä € ?˜ª¾-™×Á× gþ].#‘˜v*G5¯ûTXéZ—ÃÏ ë è³Üi–-*DüüŒ° ÃùÕaÝª ‰W¢| ž y|2º‡˜ÉåJw¬£ ‘—¯ç^k±ÞG~e 9 è^*ñáÖlî-ìwEo3˜÷yBä`v¯0·¼–9BŽ¬q^ý%+7#ç$—CE 8ÜÃ§cÞ¨ÞÌd| žÕ£z] \ñº³ –9Q GÛ® ÝL“äúzÒ³m8 JšR‚ wõ ¤®UWbÃ }jY eë“QðªH#4Ø$ (,7cÖ‚ÑjÚÝ$ÿXqéŠt±[Â XÿµQÞÜ ðª Û JDe ½ ,%Â³c U…EaŽ¤ûUk8Dó-hÉ¦:àÆÀF¡è4g¼XäqLààt«ËhæUVÁ Þ£’ÙRè)éŠW {æƒo‘òõ©¦‡l˜Ç ¦HÈ ““éNìV+éÚ|··ÉR3É>ÕZÓã³a 8 «µøi w·W 2 m£æaœ æüSµ×/ 6ð í8Ç Š¨åS—±2Ñ\±%½÷‡3 p Ì) J°=3zDàtÎqT§Œ$‘×šÒ:6ˆm2‘ cJG ÷ œt÷¤Ç 1x÷¤Æö !_Â… Ð ª˜©Âúv¨TdŽÙ«Q.Ó“RÆ‰¡^9«)òŽŸ…V íVa÷¬ÆL¼Š~ÌÓT`ðjXÉ ÛÞ‚º UÚzU¨˜ Æ)Z ë¸c8íP)Ã{ÐNä3K·#§Ö«®]²{T×JU³Ž B® S Ò8UôâšI~• ùÏ ö« ð( Ô$ ÅX‰š6 @¢Ý qÅ[`ª;~ -‰ˆÒ (nT 2j 9j™ °ô › ! SÛƒW pµ]†;qL ± ëO-œf¡ÝŒS÷ƒÎhl±¤ ¥; ëHWhëLc ™Üþu*€y¨ç; ŸJ 3§r’³ ë~ èÒk7³œ Ç ®sGÒ/ Z˜ìWåàÖXj)´äuV)-6=7H m‚cnÞÀWÊ?·Ö¸|ß h‹!ÚÆîþXÁèTG gòyGç_[ÛD#Œzµ~z~×þ) &øûªÛÆÛ ÑmôÕÇBÁLÎ~»¦ÚÜ¯W íNÇ‹Yû§ àõÄï'`+êoÙÛâŸ„4 "M:þ[m7R2ÓL»LÇ±Þx5òß‡3k§I7cži!“9=ºœ× dáfŽXÉÁÝ ¦Ö Å–§ Éks èÃ!‘ s5ñWÁ †>&×¥ŽþßP¼Ð´ÑÊ¼ TËô^˜÷"¾¤ð~‘hFXµ bM^ Ìo¸ ŸÝf Ww ¨ S®f n¹?xòk þè:79É ¬¡ I»hièÓo¿ˆ/ð ¿â]LÎÐƒÙ1‘õ¬- l\Làô^ôÍVðHÉ†Î Ÿ_'¾G5 zÁÙ…Î¥p…° 2½zšÓñ=à‡XŸ'ˆmÂ~9®Oá5ÛZ_ù™Â±ÅOâLÉ¨jR–âFÀ® BõÙÓ Z ž›ð–@ïq2°ùc ú×°~Î±›ÏŒÖ×Îw,(çqç €¯ ø_z Ñn$èÌOãÅ{Çìß'Ø5éïÛ m8Íyõ}ÙÉ1ÚçaêË/ŽµÙ `ÉÇ°¯xøe+IàÕf $–EýõÍ|…¨ëqâÝBBØ/+“ŽxÝ_Yü3³|9´óF]t§ ß½ vaÐò¿ f øÊÖ<2ùaÇ ƒú«{ö¥ð}Í×ì¥àŸ Ùå§²Š .Ao‘¡p[Û# ˆ¬ËPo4/ ›’X ‘œz ÷é¼3 ?aÉ4 Ê³ÏáÂƒ<í• *~¡–¶ÂÅNnýŸèN#øvó_“? Ãè=*wºeP ³éP¬ †sÀ¨$l¸ÆzÕX‹–VYI,y#œÔ ÌÆMÄ Š•[{ phºˆ G4X«’<ÑÏ Çß •&žGšr0¾õ™ ýšulqÞ´ï.íÞ%1pøç - îw Ö)üWåJûaxÏ#Öª|QÒc°ñ|ñÚŸ0JªÀg<‘Ið¦â6ñN |ÇÚØë^¯ñ‡ÁºV‘wiª´±µÁ ãë\ÍòÔ"jèóX| 4Í .¤•ZFPÄ æµ-- M&ì Âº¨5s¨[¼.ÇÊ bOzåê J …¢=’rx4) hP¸8<Ð"]JÓ}°tç šÆ Mt çBñ·8éYMo²V ±¦ QÆjÂ©Æ §*Ûò© 0h 0Jž ©”3 õ¦• ¥O íÞ¤–5cÉæ§ˆ sÓÓ ð£ )Ê1Í+ˆk¨=ª ^Ç¥X0¨+œsíM £!ÁÅg µ>èc‘I Ü¼Õ 8àwÿëP 8ÓùÐ¸&€¸‹ <Ö‡‡¼'©ø×Y¶Ñô˜L÷— €;(îÆ©_UÿÁ>ôÝ6óâ-ó]ì7b0" Œý ëRÙQWg³| ý•4ß…ž Žòþ1wªJ»¤’A“ŸoA]Wˆ HÜ¢¨U ìþ,‘már>î:zWŠk×"{²ƒ»TÔ´U‘Û lü<ÒŒ÷ ã’kêÿØ‹;X +çÿ†ºhŒBqÉÅ}'áx¶ÂƒµoB6± ºtÁ‚ ÌB¨ $ô ¿'1NI#˜f7 ; iØÅzI$¬Ž–ûŒ õý*ä)µ9ûÇE 9`Ý…Y ¤ QE"‚Š( ^¦M^¦@ Q@ Q@ ¾ µ¬lbq”v]Â¾Ž±ð •qg 5²g %—ŒŸO ¯ ðuŠÇ¬iÖÈ2¢E ¯ªe‰¬´ûxù # F;šð#«r=OÊq^M?/bsŠÞš²3Ž‘ NÔQÓÖ«¼ä8à )ìü’{T À>µ²@Ø

Tried that, along with uninstalling both programs. Does the same thing on Firefox as well

Link Image Click with Image Preview

Use of Bridge with DW lacking. Too many clicks to see what an
image in site folder is. Multiply x 100s of images = tons of extra
clicks.
Link Image Click (in Site Folder > Local Files) with Auto
Image Preview in DW CS 4 -Please
Please hotlink selection: Bridge W/DW and DW with
Bridge

I have done everything described but nothing has helped. It has nothing to do with the Type Tool, but with the new rendering. It occurs every time I want to insert a picture into the text flow. There is no workaround and the whole feature is completely broken.
UPDATE: I have found out that it only occurs when I use the method via alt-clicking the anchor icon and dragging the cursor into the text. (Quick anchoring introduced in CS6) When I copy and paste the image frame into the text, it does not crash.

Tag_relatedproducts image jumps on 1st click & then links to correct image on 2nd click

tag_relatedproducts image jumps on 1st click & then links to correct image on 2nd click - strange coding glitch! Should link to correct image on 1st click (& not jump) http://meluka.worldsecuresystems.com/bedroom/Drawers/chest-of-drawers-42 Was functioning correctly

It looks like those related images are being affected by your zoom script that lets you zoom the main product image. In your page template or page you have this code:
jQuery(document).ready(function(){
jQuery('div.image img').wrap('<span style="display:inline-block"></span>').css('display', 'block').parent().zoom({on:'click'});
You likely added this to make your main product images capable of zooming. I bet this all started acting weird when you put the zoom effect in. Basically, your jQuery above is saying, "Find any IMG element in my DIV with the class of "image" and do some stuff like wrap a span, update the css and execute the zoom behavior on the image's parent element"
The problem is that your related products are inside your div.image container so that jQuery call is affecting those images too.
You have two options:
Move your {tag_relatedproducts} tag outside or after the div.image. That should solve it.
OR update your zoom image jQuery statement above from jQuery('div.image img") to jQuery("#zoom img") which is more specifically targeting the #zoom link which should only have the main product image in it
Good luck!

When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

This can also be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
See:
* http://kb.mozillazine.org/Session_Restore

Is remedial action needed if you click a link in an unsolicited 'scam-looking' email and the link went 404?

Mac Mini 2.4GHz Core 2 Duo; 2GB memory; OS X 10.6.8. Incident occurred while using Firefox 35.0.
The latest/most current discussions I can find are from 2013 or older. Assuming more than a year is plenty of time for "new" malware or even "virus" that can affect Macs to be developed and distributed, I can either assume that "no news is good news"-- 'no new malware/virus possibilities' for Mac, or swallow my pride and ask the question: Is there any malware or other harmful/malicious computer code--read, something that could steal my identity if/when I do my taxes online this year--currently known to be a threat to home non-business Mac computers?
I ask because I committed the sin of all sins.....I got an unusual email from a vendor from whom I made one purchase (on ebay, a few months ago), asking me to loan "him" a sizable amount of money so he could "pay his hotel and retrieve his passport" while stranded in a foreign country. A very clear and not particularly uncommon scam method.....another flavor of the "grandma I'm in jail in Mexico" scam......and I'm one who constantly wonders how in the world people continue to allow themselves to get scammed (in my head when reading of other people doing it) by clicking on a link OR opening an 'attachment' in an unsolicited email. It wasn't tagged as "spam" by my ISP's very-good spam filters.....it was in my normal inbox; and, it was from a vendor I've done business with.
There was no attachment, but there was a link; I hovered the cursor over it; the lower left of my monitor showed the link exactly the same as it appeared on the page. I figured, well, it seems to be to the correct URL (knowing the seller's web address outside of ebay because I had visited it before finding he sold the same items on ebay). So, I clicked the link. Without a second thought. There was no other 'contact info' in the body of the email, so I thought the link looks authentic so I'll just go see if there's any information there about the owner being out of the country or ????.
The link took me to a Google "404" not found page. It was only there that I noticed the URL/link had an added letter; a stupid lack of attention on my part. The site could not be found because the URL was misspelled. I still was blissfully unaware that I violated my own rule (not to click links or attachments in unexpected email from entities I don't know or aren't currently transacting with). So I just closed the window and forgot about it.
It was only on waking this morning that I realized what I did.....and started worrying that I may have been directed to a phony "404" page that, without any further action on my part needed, might have contained something malicious that could be passed to anyone who connected to the page. I don't even know if that's possible, and I have so far not seen any unusual activity on the computer. But soon I will want to file my tax return....and I worry about the timing of this unusual-possible-scam email and the beginning of "tax time" here in the states?
So, in summary: Should I be worried that I fell for some new (since 2013) method of unknowingly downloading malicious software to my Mac? If so, what should I do now?

I don't even know if that's possible, and I have so far not seen any unusual activity on the computer.
No, it's not even remotely possible. What you encountered was an attempt to scam you, and a pathetic one at that.
Identity theft in general is a significant threat to any computer (a term encompassing Macs, PCs, iPads, iPhones...) user. However, that threat most commonly arises in the form of "phishing" and you didn't play along with it. The likely reason the email appeared to have come from one of your previous eBay vendors is that his email address was harvested using any number of methods. The email probably didn't even originate with him. eBay is a rich source for obtaining such information.
eBay has a fairly helpful guide on the subject: http://pages.ebay.com/help/account/recognizing-spoof.html
To answer your specific questions:
Is there any malware or other harmful/malicious computer code--read, something that could steal my identity if/when I do my taxes online this year--currently known to be a threat to home non-business Mac computers?
No.
So, in summary: Should I be worried that I fell for some new (since 2013) method of unknowingly downloading malicious software to my Mac?
No — although Mac-targeted adware has arisen since that time and is a rapidly growing annoyance that can make using your Mac practically impossible, it will not directly cause information theft as you have described it concerns you. Furthermore, it requires your participation to install it in the form of an Admin name and password — and it requires deception to convince you to supply those credentials. Learn more about how that happens here: How to install adware.

Can you wrap an image with a link in an html email signature?

When I cite a remotely hosted image in an html signature, and try to make that image a link, the link is ignored and the just the image is shown.
e.g.:
<a href="https://www.facebook.com/pages/Ubiquia/146019678805381" target="_blank">
<img style=" position:absolute;
height:30px;
width:30px;
left:172px;
top:157.5px"
src="http://png.findicons.com/files/icons/2779/simple_icons/48/facebook_48_black.png" alt="ubiquia facebook" moz-do-not-send="true"
>
</a>

For each icon that you want to use in your email signature:
locate icon on internet webpage - right-click on the icon and select 'Save Image as'. Save the icon to your computer in a suitable file.
Then in Thunderbird
insert > Image
choose file - locate the saved icon on your computer
click on Link tab and enter the www etc webpage link info
click on OK to insert image with link.
Codewise, where you have the actual icon you would need something stating where the icon is located:
eg
<a href="https://www.facebook.com/pages/Ubiquia/146019678805381" target="_blank">
path to image saved on computer included in within <> </a>

Is it possible to have Flash open the menu when you right click a link?

I'm using sIFR 3 on a few of my websites. Personally I think it's a really cool and nice solution. I have had no issues with it so far except what I've recently discovered.
When you right click on a link (or control click on a mac) it should have the normal menu you'd get if you clicked on a regular HTML link. Also when you hover over the link it doesn't display the status in the status bar (i.e. the URL the link will take you to if you click it).
Anyways, I'm trying to come up with a workaround to this (personally I think the developers should have already thought of one but I guess not). That being said I'm wondering if Flash can do something like that. Is there a code I can put in the Actionscript to tell it to open up the browser menu when someone right clicks or control clicks a link?
For some reason I'm thinking this isn't possible without JavaScript but I have had some people telling me in the current version of Flash it isn't possible at all. I'd be interested in hearing everyone else's opinion.
To see what I'm talking about check out this website I'm building here... http://dev.thinktecmediagroup.com/fibre-federal/
Notice that the top navigation (and side navigation) is all done using sIFR. IF you try and right click (or control click on Mac) on one of the links you'll see nothing happens.

Probleme solved without having to change anything in the flash.
The solution was to add a small part in the CSS in HTML
html {
overflow-x: hidden;
overflow-y: auto;
Solve probleme. All browser. VERY usefull to know !

Click a Link and open the save-as dialog box instead of browser opening it

Basically, i have a link to an image and when i click it the browser opens the image. I would prefer that when i click the link to the image that i get some sort of save functionality to occur.
I created a link to the Google logo so it looks like Google image when clicked the browser opens the image. What i would like to do is click the link and then have the save-as dialog pop up (or something similar). Currently I would either have to right click the opened image and save image as or right click the link and then save-as that way. In this instance the file doesn't reside on the database but an external source so is there a way to save-as dialog once the link is clicked?

Sorry, I have no idea what you are doing; can you give us some details?

Image with a Link to an URL

Hi,
I have an easy question. I would like to have a little question mark-image on my view. And this image has an link to an url. So I would like to push this image, and a new browser-window opens.
I only found the Layout-element "LinkToUrl". But with this element I don't have an image.
How does it works in Webdynpro? In HTML it is very easy...

Hi,
Change the layout to grid type and then scroll down. You will find "layout[GridLayout]" set col count here to the number equal to total number of buttons + 2.
Then click on link and in the properties scroll down and set col span = 2.
and hAlign = right.
this will do the required.
and the flowdata is coming in your container's properties because this container is also present in one of the transparent container which is having layout as flow layout.
Regards,
Sarbjeet.

When i click a link i get The Address wasn't understood

I use outlook. When I click on a link i get a message that "the address wasn't understood". I need to open links.

Do you mean Outlook, the program that is part of Microsoft Office on your PC, or Outlook, the new Hotmail?
If you right-click > Copy Link Location and then paste it into the address bar, does it start with an unusual protocol? I mean, something other than http or https? If so, Firefox might not be set up to open links with that protocol. What is it?

Calling a page process by clicking a link

I have an Apex report with multiple rows and a link column in. I'd like to be able to call a page process to do some work on the row with the clicked link... I also need to pass a couple of parameters somehow to the page process as it calls a procedure which requires the parameters to function correctly.
So -
When I click a link on a row.. perhaps a couple of hidden page items get set.
The page is then submitted and my process calls the procedure, using the values of the set items above as its parameters.
Control is submitted back to the original page.
So basically I'm trying to give a user the ability to carry out repetitive actions on each row.
My thought was to use a URL in the link and maybe Javascript.. or am I barking up the wrong tree and is there a better way rather than a link?
Thoughts?
Cheers
Ken

You have the right idea. JavaScript is the way to go. Assuming that the values that are being passed are part of that row of data, you can construct the call to a JavaScript process.
Create two hidden items on your page, make sure they are not protected.
say P1_CITY and P1_STATE
Say your query included city and state, define a column in the report as a link of target URL with the following url
javascript:myFunction('#CITY#', '#STATE#');
Then define a javascript function in the page HTML Header section
function myFunction(pCity, pState) {
$x_value('P1_CITY', pCity);
$x_value('P1_STATE', pState);
doSubmit('RUNPROC');
Then have a process on the page does what ever you want and that is conditional on the REQUEST = 'RUNPROC'

Image Maps & Photo Links

I'm new to Dreamweaver... first site design with css. I love it. Doing okay but have run into two obstacles I'm just not adept enough to over come.
Site Name: twangtowntv.com
#1) I think I have screwed up my main page template. Not sure how to fix that so that I can have repeating elements throughout the site update simultaneously once again. Is there any way to rebuild that page and then reapply the page attributes to my existing site pages?
#2) I've used image maps and have linked photos to websites many times. But, for the the life of me, I can't make it happen with the images in my right sidebar. Nothing seems to work. I image map them, link them... but nothing... no hyperlinking action! Right now I have added to each page as part of a Library item. Thought that might open the flood gate. Still... nothing. ANY IDEAS of what I might try will be greatly appreciated.
Thanks... Tim

Have you fixed this, because when I hover over any of the picture links on the right, they point to a new page or go to a different link.
if you are using a template, not sure why you would need to use a library item in the left sidebar, if the links are all going to be the same on every child page??
You can repair the master template page, and have the changes reflect on the child pages, but you'd need to make sure that all the editable regions were the same, otherwise, the child pages won't know where to create any of the new regions and could end up with a mess.

Part of image click to link

Similar Messages

Maybe you are looking for