Part of photo is blurred (4s)

Look at top-right corner of these photos:
http://dl.dropbox.com/u/5020311/4s/Photo%2014.11.11%2C%2014%2041%2024.jpg
http://dl.dropbox.com/u/5020311/4s/Photo%2014.11.11%2C%2014%2041%2032.jpg
http://dl.dropbox.com/u/5020311/4s/Photo%2014.11.11%2C%2014%2042%2005.jpg
http://dl.dropbox.com/u/5020311/4s/Photo%2014.11.11%2C%2014%2043%2007.jpg
I have a defected iphone?

And the most most demonstrative evidence:
http://dl.dropbox.com/u/5020311/4s/Photo%2018.11.11%2C%200%2052%2045.jpg
if you touch blurred left-bottom corner it will be sharp on photo, but top-right one will become blurred.

Similar Messages

Panorama photo is blur in iOS 7

I have iPhone 5 with iOS 7.0.2 and when i take panorama photo then photo is blur and not look good.

You have to move phone slowly but continuously.

Can opening shot be a long, delayed, fade of a still photo from blur to clear?

I'd like to have the first clip of an iMovie be a long, delayed fade of a still photo from blur to clear. Using the blur transition is not working; it can't be made long enough. Any ideas?
I'd like it so that the fade from blur lasts around 18 seconds, and the photo is clear for about 4 seconds...
I should also say I'm using the latest version of iMovie... just bought the computer a few months ago.
Many thanks for any suggestions!

Further to Karsten's explanation, a workaround is to create a project using your photo with a duration of 36 seconds (or more). Insert the 18 second transition. Then export the project and re-import the exported file to an Event. Now create a new project from that Event. In that new project, trim off the unrequired section from the end of the clip, so that all that remains is the transition plus the extra 4 seconds.
For best results, when exporting the 36 second clip (or whatever length), choose Share>Export using QuickTime. For the Export setting (on the pop-up menu) choose Movie to QuickTime Movie. For "Options>Video>Settings>Compression Type" choose Apple Intermediate Codec (AIC). Leave other settings as they are. This will give you a full quality movie file (.mov) in the AIC format, which is iMovie's preferred editing format.
John

Globally changing selected parts of photo captions

Is there a way to make batch changes to parts of photo captions? Something like "find and change" in word processing software.
For instance, I accidentally had the time setting wrong on my camera so that AM was PM and vice versa. I would like to change the AM to PM without affecting the actual time associated with images. This will be very tedious if I have to do it manually...

Hi Dave,
Oh, so you have been appending the batch change entries -that explains it.
The "Title" field can be batch changed like any other field, only you have to find and to select a suitable Metadata Preset that contains the "Title" field.
I have changed my presets so often, that I am no longer sure, if one of the standard presets contains this field, but you can easily define your own preset, containing all fields you want to edit.
In the Metadata tab of the Inspector Panel set the "Metadata View" selector to "Edit",
In the "Metadata Views" panel click the cogwheel to add a new view and name it,
From the right column of the panel add the "Title" tag to the new View (this tag is located in the IPTC -> Status section of the Metadata Fields.
Then use this new preset in the "Batch Change" dialogue.
Regards
Léonie
Message was edited by: leonieDF added picture, edited typos

How can i transfer photos from my iPhone 4s o myimac iPhoto easily? i have been doing via message, however the photos are blurred once on the imac, thanks,

Hi.
How can i transfer photos from my iPhone 4s o myimac iPhoto easily? i have been doing via message, however the photos are blurred once on the imac.
thanks,

You can send photos from your iPhone via email, drag the photos from the email window to the desktop then open in iPhoto.
Open a photo on your iPhone then tap the share icon bottom left corner of your screen then tap Next then tap Mail. Send the photo to yourself.
Open Mail then control click the photo then click Open with then click iPhoto. If iPhoto is not available from the pop up menu click Other then navigate to the Applications folder then click iPhoto.

Part of photo attachments is grey

when i receive a photo attachment the most part of the photo is grey i am using 10.7.5.
Is there a way i can fix it?
thanx

And the most most demonstrative evidence:
http://dl.dropbox.com/u/5020311/4s/Photo%2018.11.11%2C%200%2052%2045.jpg
if you touch blurred left-bottom corner it will be sharp on photo, but top-right one will become blurred.

Zoom only works on outer parts of photo

Very strange thing happening in LR5.6. When I go to zoom in on an image it only works on the outer 2/3s of the photo. it seems I can't zoom when clicking in the center. Same goes for when it is zoomed and I want to click the centre and drag to move to recenter the photo somewhere else. If I click on the centre it just does nothing. Also I can see that normally when I hover the mouse over the image, it shows the magnifying glass over those outer parts but when I move to the middle it just shows the mouse pointer, and same for when zoomed, the hand icon changes to mouse pointer. Anyone have any ideas what could be wrong?
I am running a brand new iMac on OSX 10.9.4 Mavericks and have the CC version of LR installed and updated. The problem seems to be sporadic so I'm not sure if it's an Apple problem?
AAron

I'm having the same problem with the iWeb 09 Hit Counter on MobileMe. It worked fine until I republished the site under a new name. Now I can't get it to appear no matter what I try (including moving it around in the 150 px footer area. The javascript looks fine in the source code (see below), so I'm wondering if this is an iWeb/MobileMe bug? My hunch is that the javascript call to get the counter is not working correctly on the server end. Here's the code that also shows the proper footer value:
<script type="text/javascript"
src="http://web.me.com/i/chp/NGHitCounter.js"></script><script type="text/javascript"
src="http://web.me.com/rbrisson2/.Counters/63346ED0-8119-49BB-8DE5-8EC27C322A09?webda v-method=propget&counter"></script>
Any help on how to fix this “break” in the javascript call would be appreciated!

Photo Book: Blur images in A3 and in a PDF

Hi everyone,
I'm making a photobook in A3, and I have a problem in it.
My pictures are in high-resolution. When I import them in my photobook, they become very blur, and it's the same things when I export my book as PDF in order to have a preview.
I don't know how to resolv this problem, if it's a bug from A3 or something else, but I'm affraid to order the book and to have a bad suprise when I will receive it.
Jonathan

Something strange: when I make a photobook in size XL, photos are perfect when I export as PDF.
But I want to do it in size L, and when I export my book as PDF in size L, photos are really bad quality...
I don't understand.
Do we have to resize photos before insert them in the photobook? But there are différent size in a book, depending where we want to put photos (small square, full page...)

Only prints part of photo

I am trying to print a 12x16 in photo from iPhoto using an Epson 1280 printer. Unfortunately, the printer only prints part (about 1/4 of the photo). It then ejects the photo paper as if it were finished with the print job. I downloaded the latest driver from the Epson website. I also tried deleting the .plist file in the Library folder (I ended up restoring it because the next time I launched iPhoto, almost all of my photos were missing). Finally, I also tried creating and printing from a new user account. The only thing that seemed to work was when I tried printing an 8x10 of the same photo (to save ink, I printed it in B/w rather than color, though I can't imagine that made a difference). Incidentally, I had the same problem once before and managed to solve it. Unfortunately, I can't remember how -- my best recollection is that it had something to do with drivers and/or Library files. Any help would be greatly appreciated.

Heather:
The problem is that the Epson 1280 does not support 12x16 borderless prints. From the Epson site:
"It produces captivating borderless 4" x 6", 5" x 7", 8" x 10", letter (8.5" x 11"), 11" x 14" and 13" x 19" color photos"
If you don't need borderless select the paper size that the printer supports that will hold that size print and select a custom sized print in the Print window. It should print in the center of the paper used.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Photos are blurred/fuzzy after transferring them from iPhoneto my computer

I was wondering if anyone else is having the same problem. I have the new iPhone 4s and when I transferred my photos from the iPhone to my PC the picture quality was worse once I transferred them. They are bright and clear on my iphone, but once I transfer them they are fuzzy and muted. Is there a way to fix this. I have tried emailing myself and transfering them using an app as well and each time they come out blurred and not nearly as vibrant as they are on my phone.

yes come to think of it quite a lot of them are purchased music tracks. how would I authorise them to copy onto my ipod from my library. Sorry its probably really obvious but I'm not great with computers.
Thanks
Cath

I downloaded iOS7 and now my lock screen photo is blurred.

It was fine in iOS 6. I tried using one of the Apple photos for the lock screen and it blurs also.
I'm not having that problem with the home screen.
Any ideas?

Apple clearly desinged the lockscreen to blur, whenever anything other than the TIME has to display there.
Took me a long time to realize that, for me, the problem was audio playback. For others, it is notifications, texts, etc.
Whenever you use AUDIO, the iOS displays the "playback control buttons" on the lockscreen, which causes the blurred background [presumably in order to better see the displayed info]. But, as soon as I PAUSE, the screen clears right up.
If your issue is notifications, this should be fixable; because you should be able to NOT DISPLAY notifications on the lockscreen.
I will be checking to see if there is an option to NOT display the "playback control buttons" on the lockscreen - given new control center, those buttons are no longer even necessary, especially when I can access the control center from the lockscreen.
We need to request that apple add option to STOP blur effect on the lockscreen.
You will NOT see this effect on the home screen; because, in theory, the iOS does not "display info" there - only icons.
Hope this helps! Been very annoying for me, as well!

E-mailed photos received blurred

MY photos on camera roll are lovely, but recently when I have emailed them to friends, they say that they are received blurred. Also, previously when sending the photos, they filled the whole width of the email, but now they are reduced in size and blurred. Any ideas? Thanks.

DCAINTLRE
If you have Premiere Elements, then your question relates to Premiere Elements via the Elements Organizer that comes with it.
And, as we know, Photo Email is an Elements Organizer feature found under the Elements Organizer Share/Photo Mail.
What version of Premiere Elements do you have and on what computer operating system is it running?
How far are you getting in the Photo Mail feature:
a. Do you get your created photo mail and see the email with its active Send button ready for you to hit the Send button?
b. If so, after you press the Send button, does the email appear to have been sent...even if you do not see a specific message saying
message sent? To verify that the message was sent, in the Elements Organizer Find Menu, go to By History/Emailed to to confirm
the sending.
Have you checked with the recipients of your Photo Mail to make sure that your sending is not ending up in the recipient's email junk
folder? Have you troubleshooted by sending a Photo Mail to yourself?
What have you set up as Email Client in the Elements Organizer preferences?
Please review and consider and then let us know the outcome.
Thank you.
ATR

PSE 8 (OSX) Drop out part of photo to reveal another?

I am guessing it's possible to crop inside one photo, drop that part out, and thereby reveal a photo underneath.
But I can't find any hook in Help (or in The Missing Manual) to let me start researching it.
Is it possible?
Can you give me an idea how to do it? Or at least what to search for in order to read about it?
Thanks in advance.

Sure. Siimplest way is to layer the two photos together (since you have the book, it's like the directions for doing a manual exposure blend in the sidebar in chapter 8) and just use the eraser tool, or select what you want to get rid of and delete it from the top photo. Helps to feather or refine edge before deleting (all that is in chapter 5).

Erased unwanted parts of photo now how to make a background

I am just getting started with PSE 8.0.1. I have a photo where I just want that part which is a given person. I cropped then erased unwanted parts. The erased areas are pure white. How would I create a background that looked like clouds or draped cloth or something that would appear only in the erased parts of the photo?

Sorry to say, but the work flow which you describe will not give you result which you desire.
Go to File>new>blank file. Enter height and width, and resolution. The resolution should be about the same as that of your picture
Set the foreground and background color chips (lower left) to diffent colors - for example shades of light blue
Go to Filter>render>clouds. You should have a background with a cloud pattern
Minimize this as you wil need it subsequently
Make a selection of the person which you wish to retain, using one of the selection tools - e.g. the Selection brush tool. After you make the selection, you will see "marching ants" around the selection.
Go to Select>inverse, then hit delete on the keyboard, go to select>inverse. The checkered pattern denotes transparency
Go to Edit>copy. This will place the selection on the clipboard.
Go back to cloud background, go to Edit>paste. This will put your selection on a new layer
Access the move tool to position and resize the selection over the background.
Merge down

Only Part of Photos in the iCloud

Hello,
I have a PC with Win7 64-bit version and an iPad 1. I set up the Photo Stream on the PC, and the iPad can receive part of the pictures I copied in the upload folder in the PC. I only have around 100 photos in this folder so I don't think it is storage issue.
1. How long will the photos be uploaded to the iCloud server? Should I always launch the iTune on the PC to allow the files to be uploaded?
2. Does the iPad update the photos during recharging? Should the iTune be turn on at this time? ( the iPad and PC are in two different places, actually apart thsounds of miles)
Thank you!

Hello,
I have a PC with Win7 64-bit version and an iPad 1. I set up the Photo Stream on the PC, and the iPad can receive part of the pictures I copied in the upload folder in the PC. I only have around 100 photos in this folder so I don't think it is storage issue.
1. How long will the photos be uploaded to the iCloud server? Should I always launch the iTune on the PC to allow the files to be uploaded?
2. Does the iPad update the photos during recharging? Should the iTune be turn on at this time? ( the iPad and PC are in two different places, actually apart thsounds of miles)
Thank you!

Part of photo is blurred (4s)

Similar Messages

Maybe you are looking for