Part of the usb connection lost
For two years we have been using our iPod with a Pioneer car stereo installed in our boat, connecting to the Pioneer's usb port. This combination has worked quite well until a few days ago, when the Pioneer no longer recognized the iPod. At the same time, however, the iPod recognized that it was connected to the Pioneer, by immediately playing music and taking a charge. When I connect the iPod to our iBook, I note the same behavior. In every other way, the iPod works as it should, such as playing into headphones.
I have tried three different connecting cables with the same result. Also,when I try to reset the iPod, I do not get the Apple logo page which I think should tell me that I have reset the iPod. I hesitate to do a full restore because I would lose the music I have on the iPod and may not be able to install music again.
Thanks,
Phil
It's not a USB port, it's a Lightning port so you can power your device while using the HDMI output.
Similar Messages
-
I have a MacbookPro 10.6.8 and each time I use the USB connection it freezes my desktop, also I have lost my Windows XP operating system on VMware Fusion. regards Bettws
Energy Saver is very problematic with non-Apple USB devices. Which means when you close the lid to your machine, those devices will not necessarily appear until you next restart the computer.
Secondly, Windows XP is not secure anymore, unless you pay Microsoft a special licensing fee. To avoid that, upgrade to at leats Windows Vista:
https://discussions.apple.com/docs/DOC-2741 -
Kinect for Windows V2 looses the USB connection
Hi,
My PC is running windows 8.1 with USB 3 port. Kinect is connected 24/7 and if I did not use the Kinect for 1day, it appears pc has lost the connection to Kinect. Unplugging and plugging the usb connection does not do bring the connection back but if I power
off and on the Kinect , then it can be seen by the PC.
How can I fix this problem?
best Regards
JohanTry a different device to see if it is an issue with the sensor itself. We have many sensors working in the 24x7 scenario so check to ensure the KinectMonitor/KinectService are running when connecting the sensor. When connecting the sensor to the machine,
is the driver correctly loading? What does device manager show for under Kinect sensor devices entry?
Carmine Sirignano - MSFT -
Can I use my iPhone or iPad as a web cam for my PC via the USB connection?
I've seen quite a few Apps for doing this wireless, most of which a very poorly executed OR don't work at all. I'm just wondering why it hasn't been more popular to do this via the USB connectivity.
Thanks Lawrence but the point is, I already own the $600 dollar device (given as a gift) and secondly because to purchase a web cam that has the same quality as the iPhone is actually just a bit more than $10 and I'm not really desirous to spend anymore money based on my budget. Any ideas of whether or not it can actually be done via USB OR do you have experience with an actual App that works via wireless to a PC? Thanks again...
-
I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer. Can I direct the iPad/iphone to the usb connected printer. Macbook iphone and iPad confirm a wifi connection through the airport express.
You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
PrintCentral for iPad on the iTunes App Store -
Is it possible to plug in an external HDD to the USB connection on my Airport Express for backups? As a kind of cheapo Time Capsule?
Unfortunately no, because the USB port on the AirPort Express will only work with a printer and a Keyapan remote control. Hard drives are not supported.
You would need an AirPort Extreme for that type of functionality. -
All I get when I turn iPod on is the USB connection to iTunes image. Then the system tells me that I have to restore the iPod. When I go through that process it says it cannot be restores because the device cannot be located. What do I do??
- Reboot the computer
- Try another cable and USB port
- Try placing the iPiod in DFU mode and then restoring
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Can I use the HP 4630 with both the USB Connection and Wireless at the same time?
Setup the HP 4630 and the wireless connection from the laptop works fine, but the USB connection on the desktop won't print.
The printer is recognized and says it is online. When I unplugged the USB the priner status went to off-line, plugged it back in and said it was ready. Tried to print the test page and nothing. Tried to print from Word and nothing. Rebooted and shut down the printer. After reboot gat the same issue. Any suggestions?Write to a local variable of the textbox.
-
Why doesn't the sd card or the usb connect to my mac ????
why doesn't the sd card or the usb connect to my mac plzzzz help meeeeeeeeeee
The reason no one has replied is that you posted in a little-viewed forum for an obsolete Apple software suite. I am asking the Hosts to move you to the MacBook Air forum.
Also these forums are NOT chat rooms so you will seldom get an instant answer. No one here works for Apple; we are end users like you who volunteer on a time-available basis to help our fellow Mac users. Patience is required here. -
Can charge my iphone 4 with the USB connected to a pc but cannot charge my iphone4 with wall charge
Why ca I charge my iphone 4 with the USB connected to a pc but cannot charge my iphone 4 with wall charge?
If it charges when connected to a computer USB, it can't be the phone. Try a different cable.
-
I getting no sound out of the USB connection in my cars from my new iPod classic. The song name artist display on the console in the car but no audio. This is happening on 2 cars - Nissan Rogue and Acura TL. My older iPod classic played fine in these cars. Has anyone encountered this issue?
I have a similar problem with a 160 gb Classic, about 5 years old - if I move the plug one channel may be heard and tehn the other. The interface works but not the sound. Different ipods eg nano work perfectly.
The two cars I have are an Audi and a BMW and both have manufacturer connectors -
I want to synch my address book to my I-Pad using the usb connection to my computer, but the IPad doesn't show up on the desk top or in I-Tunes. Any suggestions?
Try again to install the latest version of iTunes; http://www.apple.com/itunes/download/
Otherwise when your iPad is connected with your computer and iTunes open try several times; Keep the Powerbutton and the Homebutton pressed at the same time until you see the Apple logo on your iPad screen. -
my 3GS iphone refuses to leave the icon of the usb connecting to the itunes logo. I was trying to update to the latest ios. suggestions?
http://support.apple.com/kb/ht1414
If that doesn't work, try putting your phone to DFU mode.
Instructions here: http://www.iclarified.com/entry/index.php?enid=1034 -
My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?
It's all about setting up what ever version of windows you have running on your pc to share the printer. If you still get stuck post in a windows forum for help.
-
hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help
Hello, give this a try...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
Maybe you are looking for
-
After 10.3.1.1779 update my phone Q5 had facing lots prblms... at first I can't download anything from amazon app store with normal deta connection, 2nd android apps not work with normal mobile deta connection its always need wifi, 3rd mobile search
-
Dear All, I have one statement int weblogic 5.1 weblogic.propertis as follow, weblogic.security.realmClass=com.tbcn.security.realm.TestRealm but after converting to weblogic 6.1 there are no corresponding statement in the file config.xml. And when i
-
i have tried to create a sequence like 'e0001', 'e0002','e0003',.........'e0010'............ 'e0100'....... using concatenation operator in insert statement. But the problem m facing is how it will automatically use the remaining zeros as it incremen
-
Does the book title appear on the dust jacket spine?
Here's an easy question for anyone who has recently printed a book using iPhoto 08. I was just wondering if the new dust jackets show any printing on the spine. I printed my book to a PDF, and this would see to indicate the answer is "no", but I thou
-
Error : cannot set up certs for trusted CAs, help !
Hi ! I am attempting to use the javax.crypto classes in order to decrypt and encrypt information. But i get the follow message when i change the executing directory : -> cannot set up certs for trusted CAs If i decompress all follow jar files: jce1_2