Part of url is hidden

Say the URL is https://google.com only https://google.c is visible (Note that half of c is only visible), though my address bar is so long enough to accommodate text of three or four times of such URLs.

Hello gskrishna
check it in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Safe Mode], '''select "Start in Safe Mode" '''and see if this happen again, if not see: [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Similar Messages

Session id as part of URL

Hi
I am using WAS5.0 .
I want to modify the URL so tht the session id becomes part of URL and request.isRequestedSessionId() should be same as it is displayed in the URL.

there is a method to know that
request.isRequestedSessionIdFromURL --which returns true if it is from url..false if it is from cookie .....

How to hide part of URL

Hello everyone
How to use URL like like
http://domainname/path/something?action=xxx&target=yyy

It depends.
Firefox should show you the true link, i.e., sites should not be allowed to fake the mouseover, but for long links, the display might be truncated.
Regardless of the link's href=url, many links have a click handler that navigates to an altered, intermediate, or different URL. Sometimes this is coded right into the link (onclick="blahblah") while it other cases, it is quite arduous to discover.
Yet other links may be the result of a submitting form. This allows the site to use hidden form fields for some of the parameters.
If you select loosely around the link, right-click, and View Selection Source, can you see how the page is constructing the final links?

Jdbc:mysql generating exception when ip address is included as part of url

hie
I recently wrote a java application that uses jdbc:mysql connector to connect to the mysql database. The problem I'm facing is ,- when ever I include IP addresses in the url on the getConnection method I get the following exception:
com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception:
** BEGIN NESTED EXCEPTION **
java.net.SocketException
MESSAGE: java.net.ConnectException: Connection refused: connect
STACKTRACE:
java.net.SocketException: java.net.ConnectException: Connection refused: connect
The funny part is that if I use localhost on the url it works but generates the exception when I put the IP address of the local machine.
Anybody who knows where the problem is , please help
thanx in advance

localhost usually resolves to 127.0.0.1, not the routable IP address of the host.
mysql (or any TCP/IP based program) can tell which IP address you connected via.
Your mysql installation apparently isn't configured to allow external connections. The problem could be persmissions or the installation itself, or a firewall on the host.
See the fine manual:
http://dev.mysql.com/doc/refman/5.1/en/can-not-connect-to-server.html
http://dev.mysql.com/doc/refman/5.1/en/connection-access.html
http://dev.mysql.com/doc/refman/5.1/en/security-guidelines.html

IWeb as part of URL?

I seem to recall reading that one of the enhancements in version 1.1.1 is that one can have shorter URLs -- iWeb need no longer show (I am assuming here that one is hosting it on Dot Mac and not using domain masking, etc.).
In other words, instead of:
http://web.mac.com/username/iWeb/sitename/pagename
one could simply have:
http://web.mac.com/username/sitename/pagename
However, after upgrading, my URLs still include iWeb. Even if I create new sites.
Any suggestions or comments?

The only thing I remember regarding URLs is that after iWeb 1.0.1, you no longer have to type the trailing /iWeb/ on the URL....
http://web.mac.com/yourname/iWeb <== used to be required
http://web.mac.com/yourname <== now this takes you to the same place
I don't recall anything else about further shortening of the URL. Now, if you are publishing more than one site to .Mac, then your must specify the entire URL down to the sitefolder...
http://web.mac.com/yourname/iWeb/sitefolder1
http://web.mac.com/yourname/iWeb/sitefolder2
You don't need to specify the pagename because iWeb will setup the redirection index.html files for you. But you must not leave out the /iWeb/ part of the URL.
I hope this "solves" your question. If so, please mark my reply as "solved" using the little buttons in the title bar of this reply. Thanks.

CAD grab part of URL from browser.

Call comes in and generates a pop in the build in browser and it turns out that it's the wrong case, so the agent browses to the correct case. How can I update the call data with the correct case number.
I'm hoping to be able to grab the new case number from the URL or from the webpage, but running into issues using the default CAD actions, anyone?
david

http://kb.mozillazine.org/layout.scrollbar.side
Type '''about:config''' in Location (address) bar
filter for '''layout.scrollbar.side'''
Right-click the Preference and Modify it to '''3'''
You may need to reload any pages open to have scrollbar move to left after Preference change.

Regular Expression to Remove Part of URLs

I need to accomplish the following:
Search for all URLs that contain "
http://www.mycompany.com/dept/catalogs/"
and strip off anything past the .../catalogs/"
Basically, I have 3000+ links that begin with "
http://www.mycompany.com/dept/catalogs/"
and I need to strip whatever they may have after the .../catalogs/
piece of the URL.
Anyone know of an automatic way to accomplish this?
Thanks in advance!

In what programming environment are you doing this?
In DW's Find/Replace?
If so, then try this carefully on a test page, as I have not
tested it:
Find:
http:\/\/www\.mycompany\.com\/dept\/catalogs\/[^\"]*\"
Replace with:
http://www.mycompany.com/dept/catalogs/"
If you need this in some other environment, let us know.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Make picture frame part of url for picture

I have added an image file to one of my web pages. I added a picture frame from the Graphics Inspector. I published the page. Now, when I view the page, I would like to copy the image address of the image and have the frame included. Any tips, please, for making the image and the frame all one?
Thanks.
Tom

O-Tay, OT...
Screen Capture has never been in my (small) bag of tricks. I think I tried it, many years ago and the resulting lack of copied resolution made me discard it as something not useful to me.
Thanks for prompting me to revisit this scheme.
This worked like a charm and enabled me to use the whole header that I built for my bulletin board. I can see that, before I begin the capture, I will need to enlarge the screen so that I can be more precise about what is captured. I have some white area to the left and at the bottom that I did not want to include... I will try again. I am guessing that there is nothing intuitive about what Grab thinks I am trying to capture. (?)
Thank you.
Tom

How do I increase screen size for a game....lower part of game is hidden by bottom icons. NOTHING WORKS

I use Dell laptop, 15" screen, windows vista, firefox. Game loaded, can play, BUT no menu and bottom of game not visable. The right click on game and on game icon at bottom does nothing. Have to end task to quit.

Thanks MartinR, yes the Toggle bars can be adjusted so that I can see all the tracks - just in the smallest setting - however this also creates a huge area of grey which serves no other purpose than to "use up screen space". If this is deliberate then there is nothing one can do - since presumably the additional profit made on screen sales is more important to Apple, than the combined annoyance to those working on a 13" laptop. Of course a 15" screen or even 17" screen may make this wastage less obvious. Please indicate that this is all incorrect and explain why it is important to have space waiting "for additional tracks", even if I have no intention of making additional tracks. If that is the answer then perhaps additional space to the left and right of the timeline would be useful in case I wish to make a 30 minute film, so that it could be placed there without having to drag anything. It may be that I am expecting software than can be tailor adjusted, each parameter to the desired level as in professional items and since this is a cheap consumer program it is not possible.
I bought Final Cut Pro for a lot of money (when it first appeared it was thousands and not just hundreds) but never used it since it was too complicated and tedious, but maybe there, this problem of screen wastage does not occurr, perhaps someone can advise! I could go back and reinstall it, but it was made for 10.2.8 and not 10.6.8 so it would not run on this macbook. I recently bought an old 15" TitaniumPowerbook (from 2005) and despite running at 1MHz the response time on it is "instantaneous" - amazing to not have the almost half second delay on many commands - graphics appear nearly immediately (just 5 milliseconds delay) and this makes working so much more enjoyable, not having the (350ms) stutter of 10.6.8 which we all get used to after our initial disappointment.
Thanks for your help!

Cannot get URL web part filter to pass Parameter to List web part

How do I wire an out-of-the-box URL web part filter to a SharePoint 2013 list (or "app" as renamed in 2013) web part when the list has a parameter?
My SharePoint list uses a parameter because it needs a Contains filter, as in
     <Where>
      <Contains>
       <FieldRef Name="MyFieldName"/>
       <Value Type="Note">{MyParam}</Value>
      </Contains>
     </Where>
The ParameterBinding is defined simply.
<ParameterBinding Name="CohortParam" DefaultValue=""/>
It has had Location="None" in the past, but another forum entry that I read suggested removing that.
When I add the list (or "app" in SharePoint 2013) to a web part page and also add a URL Filter web part, the URL filter cannot see the parameter. The menu chain Connection >> Send Filter Values To >> [My List web part name] shows
the dialogue. On the "Choose Connection" tab, I choose "Get Parameter Values From". Clicking the "Configure" button results in the "Configure Connection" tab having the message "The Consumer Web Part did not
provide schema information".

Hi Randy,
You need to change the "MyParam" to "CohortParam", for parameterbinding element we need to add the location attribute as below codeline, then when we use the QueryString "CohortParam" with value in url, it will directly
filter the list web part items without adding URL Filter web part.
<ParameterBinding Name="CohortParam" Location="QueryString(CohortParam)" DefaultValue=""/>
I attached my resutls as below image (also "MyParam" can be changed to "CohortParam" if you want), you can take a look.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Part of graphic hidden after filter is applied

I imported a graphic from Illustrator in Motion (a cube). I applied a Bulge filter to it. When I jacked up the amount of Bulge, part of image was hidden. The Bulge doesn't show behond the overall dimensions of the original graphic. How can I show the entire effect of the filter?

Heya,
Nest the graphic within a layer, enable Fixed Resolution for the layer (found the in the 'Layer' tab of the Inspector), and apply the filter to the layer.
Some filters don't cause the full-size area of the target to grow, as is the case with Bulge.

Webreporting - Command URL with "2" DataProvider

Hi all,
i am using a very long command url:
<SAP_BW_URL DATA_PROVIDER='DATAPROVIDER_1' CMD_1='ITEM=TABLE_1&HIDDEN=X' CMD_2='ITEM=TABLE_2&HIDDEN=' CMD_3='ITEM=TABLE_3&HIDDEN=X' CMD_4='ITEM=TABLE_4&HIDDEN=X' CMD_5='ITEM=TABLE_5&HIDDEN=X' CMD_6='ITEM=TABLE_6&HIDDEN=X' CMD_7='ITEM=TABLE_7&HIDDEN=X' CMD_8='ITEM=TABLE_8&HIDDEN=X' CMD_9='ITEM=TABLE_9&HIDDEN=X' CMD_10='ITEM=TABLE_10&HIDDEN=X&DATA_PROVIDER=DATAPROVIDER_2&CMD_11='SET_NAV_STATE&ALL=X&IOBJNM_1=3V580UKS65FB0787Q1PCZ99AR&AXIS_1=X&IOBJNM_2=3UV7DAADF49GXT01LTYGLZHW3&AXIS_2=Y&FILTER_IOBJNM=3UV7DAADF49GXT01LTYGLZHW3&FILTER_VALUE=&3V1KIO6SW7GDK11BYCJZJ2637'>
My problem is that all commands on Dataprovider 1 are working fine. Now i want to add in same command url a commands on a second DataProvider (DATAPROVIDER_2)! But the url is not working. I think somethings wrong here.
The interesting part from url is this :....&DATA_PROVIDER=DATAPROVIDER_2&CMD_11='SET_NAV_STATE&ALL=X&IOBJNM_1=3V580UKS65FB0787Q1PCZ99AR&AXIS_1=X&IOBJNM_2=3UV7DAADF49GXT01LTYGLZHW3&AXIS_2=Y&FILTER_IOBJNM=3UV7DAADF49GXT01LTYGLZHW3&FILTER_VALUE=&3V1KIO6SW7GDK11BYCJZJ2637'>
Seems like CMD_11 on Dataprovider DATAPROVIDER_2 is not working!
Thanks for all who can help me
Regards,
M. Erbil

Hi Mehmetali,
copy&paste the attached coding in your html-body.
Below the "visible" table you will find the buttons for switch between TABLE_1 / TABLE_2 and a variable export button.
best regards
Jens
<BODY>
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TABLE_2"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
         <param name="HIDDEN" value="X"/>
         ITEM:            TABLE_2
</object><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TABLE_1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         ITEM:            TABLE_1
</object>
<A class=SAPBEXBtnEmph href="<SAP_BW_URL item='TABLE_2' hidden='X' cmd_1='item=TABLE_1&hidden='>"> Show Table 1</A>
<A class=SAPBEXBtnEmph href="<SAP_BW_URL item='TABLE_2' hidden='' cmd_1='item=TABLE_1&hidden=X'>"> Show Table 2</A>
<SCRIPT language="JavaScript">

</SCRIPT>
</BODY>

Help with redirecting URL from Web Dynpro

Hi,
I have a question regarding how i can construct a URL where i would like to forward the user from a WD app based on some user interaction.
The problem is that i need to know the protocol, server & host to resend the control to ( basically append these values to a url path that i have eg: <http(s)>://<host>:<port>/<the path i have>). With NW2004s, the request object is not exposed to us anymore, so i am wondering what is the best way to construct the url.
I have gone through various posts here and the one that came closest to accomplishing what i need is the one by Valery S which recommends creating a Servlet that captures the request info that i need and then calling the WD app including the info that i need as request parameters in the calling URL.
Before i do this, i want to see if anyone has been able to solve this through another approach.
Appreciate the inputs.
Best Regards
Renchy Thomas

Renchy,
Now I see you are conflicting with yourself
On one hand, if you need to redirect to the application hosted on the same server you need no protocol/server/port parameters. And you confirmed that this works for you.
On other hand, you are complaining that WD doesn't know in advance the protocol/host/port of arbitrary server you are planning to redirect to. Well, as I understand this is not API issue, this is configuration issue. You just need some configurable way to store such settings.
If this is true, then I can suggest 2 options:
1. HTTPDestination -- you are setting and configuring destination via VisualAdministrator, then from your code you are lookup destinitation by logical name and get physical URL.
2. IWDConfiguration / WDConfiguration -- you are creating settings as regular properties file, after deployment you may tweak this property file with VisualAdministrator. From code you are using WDConfiguration API to read URL or parts of URL as properties.
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

Display Calendar View in List View Web Part

We have a list and a calendar view of the list. I wanted to display the calendar view of the list in a List View Web Part in another page in the site.
When I select the 'Calendar View' from the Views drop-down - it does not work.
Please can you help.

Hi Aritra,
Is there some errors on your environment? So, you can have two workaround to do it.
You can use SharePoint designer to add an empty data view source on your page ,then select the page.
Use
Page viewer web part on your page, then put your calendar view web part page URL into your PVWP.
Thanks,
Jack
Jack Gao
TechNet Community Support

Link to URL -- How to use it?

Hi Experts,
I have created LinktoURL UI element in my WD program1. I have to call WD program2 from WD program1 using this LinktoURL UI element. I had earlier written code like as below. The code was working fine. Now my problem is that code is not working any more. Can you please provide me some guidelines. What is the generaic method to call one WD program using other WD program using LinktoURL. I had created context called URL and wrote the code in wdDoModify. Problem is earlier code was working fine. Its not working now !!!
Thanks
Gary
public static void wdDoModifyView(IPrivateAutoSettlementAppView wdThis, IPrivateAutoSettlementAppView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
if(!"".equals(wdContext.currentContextElement().getTripNumber())&&null!=wdContext.currentContextElement().getTripNumber())
      wdContext.currentContextElement().
      setUrl("https://ruepd.mycompany.com:50001/irj/portal?" +
                  "NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.sap.pct%2Fevery_user%2Fcom.sap.pct.erp.ess.bp_folder%2Fcom.sap.pct.erp.ess.roles%2Fcom.sap.pct.erp.ess.employee_self_service%2Fcom.sap.pct.erp.ess.employee_self_service%2Fcom.sap.pct.erp.ess.area_travel_expenses%2Fcom.mycompany.portal.page.create_expense_report&DynamicParameter=trip_number%3D"+
               wdContext.currentContextElement().getTripNumber() +
               "%26mode%3Dcreate&TarTitle=Create%20Expense%20Report");
      else
           wdContext.currentContextElement().setTripNumber(wdContext.currentSettlement_DetailsElement().getReinr());
           wdContext.currentContextElement().
                setUrl("https://ruepd.mycompany.com:50001/irj/portal?" +
                         "NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.sap.pct%2Fevery_user%2Fcom.sap.pct.erp.ess.bp_folder%2Fcom.sap.pct.erp.ess.roles%2Fcom.sap.pct.erp.ess.employee_self_service%2Fcom.sap.pct.erp.ess.employee_self_service%2Fcom.sap.pct.erp.ess.area_travel_expenses%2Fcom.mycompany.portal.page.create_expense_report&DynamicParameter=trip_number%3D"+
                         wdContext.currentContextElement().getTripNumber() +
                         "%26mode%3Dcreate&TarTitle=Create%20Expense%20Report");

Gary
I have the same scenario and this code works very well:
change "BBAprovacoesPendentes" for your target application name.
public void onActionAprovacoesPendentes(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionAprovacoesPendentes(ServerEvent)
       //Get component's message manager
       IWDMessageManager messageMgr = wdComponentAPI.getMessageManager();
       // Get name of deployable object this component belongs to
       String deployableObjectName = wdComponentAPI.getDeployableObjectPart().getDeployableObjectName();
       Map urlParameters = new HashMap();
       // get URL parameter value entered by user, stored in context attribute
       // u2018UrlParamValueu2019. Put parameter u2018hugou2019 in the sneak preview version.
       try {
       // Get deployable object part of target application.
       // Precondition: assume, that other application belongs to the same
       // Web Dynpro Project (Deployable Object)
       WDDeployableObjectPart deployableObjectPart =
       WDDeployableObject.getDeployableObjectPart(
       deployableObjectName,
       "BBAprovacoesPendentes",
       WDDeployableObjectPartType.APPLICATION);
       // Get target URL based on deployable object part and URL parameters 8
       String urlToTargetApp = WDURLGenerator.getApplicationURL(deployableObjectPart, urlParameters);
       // Fire exit plug to target URL via IPublic-API of used interface view
       // controller
       wdThis.wdGetRequisicaoCompraWindowController().wdFirePlugExitPlug( urlToTargetApp );
       } catch (WDURLException e) {
            messageMgr.reportException(e.getLocalizedMessage());
       } catch (WDDeploymentException ex) {
            messageMgr.reportException(ex.getLocalizedMessage());
    //@@end

Part of url is hidden

Similar Messages

Maybe you are looking for