Part1 is not updating in J1IEX

Dear Experts,
I am posting GR for import po, in the excise tab all the excise duties are visible in MIGO I am updating RG23A Part1 through J1I5, system is giving me message records successfully processed,but when I am capturing excise invoice through J1IEX Part1 tab is appearing and PO QUANTITY is also visible ,but the excise duties are not updating, BED, ECSS, SHCESS all are zero,
Please suggest,
ARABBAS
Edited by: arabbas on Dec 27, 2010 2:43 PM

Hi
if your posting the import po menas giving the input of duties in po conditions only.
Basically CVD values updating to jmop only. means basic excise only. so just check setoff entry is maintained for jmx1,jex1 and jhx1. here no need to maintain separatly for import po like other only.
if your using the TAXINN procedure check
path LG-TAX ON GOODS-BASIC SETTINGS- INDIA-DETERMINATION OF EXCISE DUTY-MAINTAIN EXCISE DEFAULTS.
here check maintain properly or not ? check the classify the condition types.
laxman

Similar Messages

Profit Center not updated in J1IEX & New GL is activated.

Hi All,
Good Morning to Every body
We have activated New GL concept making Profit Center mandatory. Thereafter, we have made a Import Purchase Order. The material for which import is being made is given the cost center in the master data. Then MIGO has been done. Accounting entry is picking up the Profit center filed automatically. Then MIRO is done and accounting entry is picking up the Profit Center filed automatically. When we do J1IEX " Post Excise Invoice" then system is not picking up the Profit Center Field automatically and is displaying an error while saving. System is saying" No profit center is updated for line item 001".
That means, system is not picking up the profit center from the material after MIGO into J1IEX while posting excise invocie.
Please some one help me as to how we should capture the Profit Center field automatcially or mannually so that Excise Invoice can be posted.
Thanks in advance. Useful answers will be awarded with points.
Thanks & Regards
Rishikesh

Hello Rishikesh,
Please use the "Capture and post" option in migo for exicse invoice if you are using New G/L with profit centre.
Regards

Excise duty rates are not displayed in J1IEX

Dear friends,
Excise duty rates (BED, ECS, SECESS) are not displayed in item level in excise invoice J1IEX, But excise values are updated correctly. I have maintained duty rates in J1ID. Kindly give your valuable inputs.
Thanks and Regards
ETR.

Hi Maladri,
Thanks for your reply.
I have maintained my condition types BED, ECS, SEcess in respective fieslds of BED Condition, ECS condition, SEcess condition already, eventhough the % not updated in J1IEX Excise invoices.
But it has updated 10 days before all values came properly in J1IEX.
Can you explain which condition type we have to maintain in BED %, ECS%, SEcess % in Maintain excise defaults, I didnt maintain any condition types there. If it is the reason then how it updated correctly 10 days before?
Kindly guide me
Thanks and Regards
ETR

ECS Value not defaulted in J1IEX for Import PO

Hi,
I have raised import purchase orders. After BOE, i am trying to capture excise details in J1IEX. CVD,SECess,AED values get defaulted. But ECS value is not updated in J1Iex.
Please help me to sort this issue.
Regards,
Jothi

Hi Jothi..
Can you brief the steps that you did sofar..
I am also having the same case and i didnot get the default values in J1ieX even...
Iam getting all the values defaulted in MIGO.But i want to capture that in J1iex only.
But you jus check whether you are getting the values defauleted in MIGO first..if not chk the configs at "Tax Defaults".
Thansk
R.Kannan.

J1iex "capture excise duty" not updating Part1

Hi MM masters,
we have configred for capturing excise duty in MIGO and it is working fine. Now case is that when we are selecting "no excise" at MIGO in excise tab and capturing excise at J1IEX "Capture excise Duty" with ref. of Material Doc. it is not updating Part 1.
Pls note that J1ID is maintained for vendor & Materail.
Thanx in advance.
Ajeet

Hi Ajeet,
Please refer the below links. You may find some useful information.
part1 and part2 problem in j1iex because of partial cancellation of MIGO
excise duty
Excise Duty
Warm regards,
Murukan Arunachalam

RG23A PARTI & PARTII register & tab is not updating in MIGO by 103 105 mvt

Hi Experts,
I am doing MIGO by 103 & 105 movements. My problem is RG23A PARTI & PARTII register is not updating & also in Detail DATA (below the header details tab) Excise ITEM tab is also not coming.
I have done the configuration like LOG GEN->Tax on Goods Movements ->under business transcations->Incoming excise details->specify movement types involve in excise invoices.
Actually, after doing MIGO PARTI is updated in table J_1IPART1 but no values updated for J_1IPART2.
Can anybody help me?
Thanks
Trupti

Hello
as per you part1 values updationg while doing the time of migo and part2 values not updating while doing the j1iex post .
your not getting the excise tab on details so check the tax code mentioned in po assigned the co code or not ?
if your using the TAXINN procedure check the condition records in fv12.
check the j1id settings for material and vendor.
Regards
Laxman

Part I and Part II not updating in MIGO..about CIN( Country India Version)

Hello,
This is regarding Part 1 and Part II is not updating in MIGO.
Case 1
step1 : Doing ME21N.
step 2 : Doing J1IEX ( Capture)
step 3 : Doing MIGO ( Giving reference of posted Invoice)
step 4 : Doing Invoice
Step 5 : Posting J1iex.
Step 6 : Trying to View Patrui and Part II tab in MIGO
unable to do so.
Case 2
step1 : Doing ME21N.
step 2 : Doing MIGO ( Capture and Post Excis Invoice)
Step 3 : Doing MIRO.
Step 4 : I am able to view Excise tab in MIGO.
Could you able to answer why it is not updating MIGO? and how can we resolve this.
Thanks & Regards
Sudhansu

Hello,
Case1:
1) In you first case you were capturing the excise invoice before MIGO, so it means that you are only capturing the excise no Part1 and part2 entry.
When you go to MIGO with ref to excise Invoice (In excise tab) then system will update both Part1 and part2 entry.
so you can check these entries in J1I7 t.code.
Note:Once your GR is saved then it is not possible to view excise tab in GR display(There is no question of Part1 and part2 entry).
Case2) Check the material is available in J1ID or not....check the material and plant. and chapter id combination.
Then only you will get the excise invoice tab in MIGO (for Capture and Post of excise Invoice).
Regards
Mahesh Naik

RG23A Part1 entries not printed in registers

Dear Gurus,
Transaction J1IEX generated RG23A PART1 and RG23A PART2 Entries and Internal Excise Invoice Number:
Internal excise Invoice Number - 2848
RG23A PART1 - 780
RG23A PART2 - 630
RG23A PART1 and RG23A PART2 Resisters are extracted using J2I5 and Printed using ZJ2I6.
After Extracting RG23A PART2, showing entry (630) in print preview of RG23A PART2 Register which is generated using J1IEX
But after extracting RG23A PART1 Register, not showing entry (780) which is generated using J1IEX in RG23A PART1 Register.
Do we need to post J1i5 before extracting J2i5, so that entries are printed in RG23A PArt1 register
Kindly help.
Regards,
Prashanth

Dear Gurus,
Find the current scenario, what we executed. we do not have a Purchase order as the Material moves with Movement Type 323 (TR. Code QAC2) from Storage location to storage location:
1. We entered J1IEX for Excise Value credit with option of Without Purchase Order noticed an entry in both the tables of J_1IPart1 and J_1IPart2
2. We ran J1I5 for Movement Type 323 u2026 Entry was recorded in J_1IPArt1 table
3. Run J2I5 for the Register extract
4. Run ZJ2I6 for the Register print
RG23 A Part 2 register print has the Value Credit entry
RG23 A Part 1 register print does not have either of the 2 above entries ( from J1IEX and J1I5)
My queries
1. J1IEX generates a Part 1 Entry into the table u2013 should this not be in the print
2. If J1IEX records an entry into the Part 1 table do we need to run J1I5 again for 323 as this posts 1 more record
3. ZJ2I6 needs to print the Part1 Entry for this scenario. Currently it does not
Kindly help

RG23 Part II not updating for Vendor Return

All SAP Gurus,
In case of Vendor Return..
RG 23 Part I is getting updated.
But RG23 Part II is not getting updated.
Where may be the problem?
Regards,

dear sir.
when u do vendor return ,
1) part1 will get updated in RG23 part1.
2) RG23 part II will not update until you utilized in J2IUN, after utilization then only it will update to RG23 part II
in j2iun we can utilized with respective u r vendor return excise invoice number.
or
if u r series group ( Immediate Utilization of CENVAT indicator active), while creating excise invoice in j1is , it will update the part II
regards
jrp

Register RG23C2 and table J_1IPART2 not updated

hi gurus
we have an issue in exercise register and table updation.
we Used T Code ---> J2IUN ---> Monthly utilization. there after
the gl account has been updated but our register RG23C2 and the table J_1IPART2 not updated.
in the month of last september.
After that we did in march and it was updated but the september entry is still not updated in the register and in the table.
we thought of updating the table through a zprogram but it is not recommended by sap.so please give me a guidance on how to update the table and the register

Hi,
Check whether
1.Actually any entries are there for RG23C2, this you can check from table J_1IPART1 by choosing Register type 'C'.
2. If entries are there, must be posted through 'J1iex'.
3. Execute 'J2I6' before viewing the register.
Regards

IPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers?

iPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers? I downloaded old version of Numbers 2.0.1 from DVD but with both versions the 2.0.1 will not open. So both versions are present but only the new version functions. I tried to drag the new version to the trash but the old version still runs error message and will not open. I did not try to restart with the new version in the trash.

Maybe. See:
Reverting to previous version of Numbers

IPod will not update in iTunes with Windows Vista

Every time I connect my ipod to my computer, my computer locks up and it does not update. The only way I can even connect my ipod is to use manual update.

iTunes does not yet support Windows Vista. There are numerous problems running iTunes on it. The latest release of iTuens 7.1 fixed some of them but not all.

Previews in Adobe Bridge in Essentials View do not update after manipulation in Adobe Camera Raw

When I open a RAW file in Bridge and manipulate it in ACR, the preview is not updated in Bridge Essentials View. The only way I can get it to update the preview is to open the file in "Preview" view, then it updates and looks fine in Essentials view.

Is Bridge set up to store the ACR modifications to those XMP files? Only then it can update the preview right after working on it. Else you need to refresh the preview cache.

Can not update request in data target

Hi,
We have a process chain for master data (10 parallel) loads. One of the load
failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
When I checked the InfoPackage
(a) update: full load
(b) it has data selection
(c) processing :PSA and then to data targets
(d) Data targets: update in all data targets for which active rules exist.
But I do not see any list of data targets here.
Can some one please suggest me how do I correct this load failure.
Thanks

Hi Wondewossen, NS and Nagesh,
Thanks for the information. I am in support, and the developer is
not here now.
I have checked Header tab in the monitor, in this there
is a update symbol and infosource name and an -->
but after arrow there is nothing.
when I click on this I get a message
"No active update rules exist".
Can you please advice me how to I correct this.
Thanks

Exporting catalog, making changes, then importing catalog does not update file movements and deletions

I export part of my master catalog to a laptop. I include the image files so I can edit the files at full res. After managing and editing files I import the catalog back into the master catalog. When importing I check to replace metadata, develop settings and negative files. I have been running some tests to be sure all my work is being captured in the master catalog by this process. I find that if I change develop settings or photo ratings this is detected when the file is imported and the data in the master catalog is updated properly. The surprise is that if I delete files or move files among folders in the exported catalog these changes are not detected and these changes are not updated inthe master catalog. It seems bizarre to me that such changes are not detected but I do not see how to get LR to recognize these changes and include them in the catalog update. Without this capability I don't see how to use catalogs to move part of a catalog to another computer for edits and file management and then move back to the master catalog.

There are various reasons why Lightroom works this way, but you'll need use pick flags to indicate photos to be deleted, and other metadata like colours or collections.

Part1 is not updating in J1IEX

Similar Messages

Maybe you are looking for