Partial cancellation of attendance for attendee in training and event

dear training module experts,
i have a issue in partial cancellation of attendance.
1.I have created a business event group for training calendar(OOEG)
2.I have created a business event type (OOET) WITH RELATIONSHIPS
3.I have created business event dates with resources(PSV2)
4.I HAVE BOOKED PERSONS FOR EVENTS ( NOT FIRMLY BOOKED)
THE EXAMPLE IS
BUSINESS EVENT TYPE IS : "communication skills program"
Business event dates are: 01.02.2007 to 03.02.2007
Persons booked are : 1.paul
                                2.David
                                3.Chandru
                                4.Rex
                                5.Bansali
all these persons are booked for 3 days . But on the day of event happening, one person say ., David doesn't attend only for 02.02.2007 where as he attends for 01.02.2007 and 03.02.2007.
Now we have to cancel his attendance only for 02.02.2007.
we need a report to be run showing his attendance for that event called "communication skills" for 01.02.2007 and 03.02.2007 and his report for 02.02.2007 should show nil.
In other words, i need to partially cancel his attendance and not cancel the whole attendance for him.
how to go about it? is there any program in standard .
IN normal transactions , it doesn't seem possible
Even integration with time management doesnt help for partial cancelllation before running a attendee list report .
soliciting your replies and correct solution.
nataraj s

Do it through your IT 2002. Mark him as leave for those days. Cancelling through TEM will cancel attendence for whole program

Similar Messages

Error when activating update rules for R/3 training and event management

hi all,
when iam trying to activate update rules for training and event management cube it is giving fallowing error."IC=0PE_C01 IS=0HR_PE_1 error when checking the update rules
Message no. RSAU461".
please guide me how to solve this issue.
thanks & regards
Vamshi D Krishna

Hi Vamsi,
Have you followed the following document to implement HR ?
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23

Internal Activity Allocation in Training And Event Management

Hi,
I am facing a problem while internal activity allocation of attendees in Training and Event Management. When i try to run "Internal Activity allocation for Attendees" i get an error message as " Reference document 1005 could not be found".
I have done all the configuration but even then i am unable to understand the reason for this error.
Plz help
Regards
TS

Hi,
I have resolved the above error. it was due to master data maintainence.
But now while posting i am getting an error that " Activity type XYZ can not be allocated to 2008"
Can someone help with this?
Regards
TS

Training and event management - create new type of attendee

Hi all,
For training and event management, I have to create a new type of attendee besides sap existing attendee type such as company, contact person, customer, external person and so on.
Via IMG -> Training and event management -> basic settings -> object type modeling enhancement -> object type -> define object types, then how can I define OrgObj Type for new object type I want to create?
Thanks & regards,
WCC

S_AHR_61016216 - Cancellations per Attendee , i think there is no standard report for cencelation of business events, type and group.
for cancellations per attendee reports is available in the system.
good luck
Devi

Appraisal for Training and Event Management

Hi Friends,
Hope every one doing well.
I have a requirement regarding the Appraisal of Attendee and send to its reporting manager for review and Manger may change the rating and completed or reject for re-appraise from the attendee.
Note: We are not using LSO, using old Training and event management and we don't have any ESS,MSS system simply doing in ECC system only.
here i need the notification for the reporting manager once the attendee save his ratings, if i do with old appraisal functionality with APPCREATE & APPCHANGE system is not giving any notifications to the reporting manager.
if i go to new appraisal system that is with PHAP_CATALOG and PHAP_ADMIN i am not able to get the course's what employee attended for the training.
please can any one share your view how to do this.
using BS - Appraisal Model
BG - Criteria Group
BK - Criterion
Thanks in advance,
Best Regards,
Praneeth kumar

Thanks for your suggestions.
i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS. appraisal has to done in the ECC only.
Done the customization like this :
created scales
created appraisal model and assign the scales
for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
Now Appraiser (Manager) from APPCHANGE complete the appraisal.
now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
Please help in this requirement.
Thanks and Best Regards,
Praneeth kumar

User exit / BADI for training and event management

Hi all,
Can anybody tell me if there is any user exit / BADI for training and event management module?
Thanks & regards,
LOI

Hi
BADI's for Training and Event Management
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
HRTEM_READ_OBJECT      Customer Enhancement: Name Format
RHPV0001 Customer      Enhancement for Additional Checks for Booking
Enhancemnet Spot:
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
~~~Ganesh Kumar K.

Upload for Training and Events Business Event

Hi all,
I am new to HR.
I need to update training and event with external data. Once a month I recive the data in a file. But how can I do this using ABAP?
The file consists of the following fields...
Object type| Business Event ID| Relation| Attendee ID| Attendee Type| Proficiancy Rating| Assessment Mark| Assessment Comment|
I am thinking of to create BDC....let me know what should i do.....
Thanks in Advance.....!Brahma

Hi Waz,
Thanks for your reply,
The procedure i have to follow is.....
1.A event of business occurs on xxxxx date with object type E, and with object type id - example like sobid
2.A list of employees P or H is provided to be booked against. Once booked , the business event date is firmly booked.
3.A followup action is then conducted on Business Event date. A competency rating is then captured for those who attended.
Once this information is saved, it passes the qualification for those who attended to 0024 infotype.
Then in the follow up screen(PV15 Tcode) go into an individuals record in the qualification overview and capture assessment details in the notes section of the selected qualification
Please let me know its urgent....
Thanks in advance,
brahma

Training and Event Management (PE) - What does PE stand for?

Hi
Re: Training and Event Management (PE)
Can someone tell me what (PE) stands for?
I have had a look at the documentation on SAP Help but cannot see what this stands for.
I want to use this in the naming convention in my role stategy but need to understand what this means.
Does anyone know?
Thanks
Charnaine

Hmmm... the plot thickens...
Perhaps if we look into the context where this abbreviation is used, then it would give a hint.
For example:
"training evidence in PE" => Personnel Education
"attendance recorded in PE" => Personnel Events
"will result in PE" => Personnel Execution
According to [PE-RPL|http://help.sap.com/erp2005_ehp_04/helpdata/EN/77/bff8ab4a2911d182b80000e829fbfe/frameset.htm] it is a bit of a mix of the first two.
Cheers,
Julius

Employee get booked for an event during absence in Training and event manag

Hi ,
I am having foloowing issue :
I am able to book an employee for a period during which absence already created in system for the employee. I have checked all the settings at course type level in Course Type info infotype " Allowed in time off " is disabled.
PLOGI TIME switch is active.
Why its happening ?
Thanks and best Regards
Puneet

Well Puneet,
To just review all the steps, the followingsettings are required for integration iwth Time management - only sample settings are shown below
T77S0
PLOGI     TIME     1     Integration switch: Training and Event Mgmt/ Time
T77S0
SEMIN     AINST     0100     Attendance type for instructor in T554S
SEMIN     APART     0101     Attendance Type for Attendance in T554S
SEMIN     TIMEP     100     Minimum percentage attendance
T77KA
B     Event attendance     8     0800
B     Event attendance     8     0900
B     Event attendance     8     0901
If we do all this, I have verified, that even if employee has one day absence during a course for more than 1 day, system does not allow me to book a training course when an absence already exists.
If you are certain that the settings are all correct, then it looks as if there might be some kind of product bug in your system and it may be required to raise an OSS message for the same. I cannot think of anything else that needs to be set up for this.

"Customer" BAPI in Distribution Model for Training and Events

We have an HR box with Training and Events - When booking an attendee on a course, you can select the "contact person" tab. Our SD box is separate from HR, so all the contact persons are maintained there. Is it possible to use the "Customer" BAPI in a distribution model so that when we search in the HR box for a contact person, it actually fetches the data from the SD box?
I remember reading up on this a while back but I can't find the documentation I had back then...
I know that in BD64 I can create a distribution model, and if I remember correctly, i should be able to "Add BAPI" and use object type "Customer" - Then add all the methods that I need... (like Find, List, Search etc) In essence, once this model has been distributed to the other system, if I go to transaction XD03 in the HR box, I should be able to display customer master details that only exist on the SD box - Is that correct?
Please help as I am not able to get this to work...

Ok I figured it out...
I have created a distribution model with the HR system as the source, and the SD system as the target.
In change mode, click the "Add BAPI" button and choose object BusPartnerEmployee, method CheckExistence
Do the same for the following:
BusPartnerEmployee.Display
BusPartnerEmployee.GetList
Customer.CheckExistence
Customer.Display
Customer.ExistenceCheck
Customer.Find
Customer.GetContactList
Customer.GetDetail2
Customer.GetInternalNumber
Customer.GetList
Customer.GetSalesAreas
Customer.Search1
Ok so I know that this might be a little over-kill, especially all the Customer methods that I added, but it works

Integration between Training and Events and Attendances

Good morning,
It seems to be simple to automatically create a It2002 for an employee who has just finished a training course, only by doing the follow up of the course.
well, it does not work form me. I do the follow up, I fix the course, everything seems to work fine, but the IT2002 does not get created.
My config:
PLOGI-TIME = '1' -> I have also tried with 'X' but no difference
SEMIN-APART = 0420
Created an event type, event and booked an employee. I firmly booked the event and did the followup.
The IT2002 was not created. Is there anything else I need to do to automatically create this infotype?
Otherwise, how can I manually create all the pending ITs for all the courses that have been confirmed from a specific date?
PS: I am a very generous rewarder
Many thanks

hai
try with the following ..i have collected this from previous thread..
PLOGI-TIME = '1'
SEMIN-APART = 0420
Created Attendance Type, Quota, Deduction rules etc.
Configured a Business Event Type, Business Event and Booked a person against the same. I firmly booked the event and did the followup.
PLOGI PLOGI entry for the integration of Training and Event Management Entry variant
SEMIN-TIMEP entry to specify the minimum percentage attendance for the business event to create an attendance.
1001 relationships and the A025 relation between the E and the P has a percentage (PROZT) of 0%. Could it be the reason? If yes, how can I change this value to 100%
created entires in T779X and it worked

Setting up ESS for Training and Event Mgmt

Hello to all SAP HR experts,
i am now doing a project on SAP ERP HCM and would like to learn more about the things and steps i need to do to come up with a ESS for Training and Event Management. I have an account for SAP Netweaver and able to access Enterprise Portal (EP). Do i require to navigate in EP to use the items there or do i need to set up an adobe interactive form using SAP Netweaver Developer Studio, design the flow at Visual Studio(VC), then link all the VC at Guided Procedure? If that's the case how am going to extract the data which i have configured in the IMG path under Training and event mgmt (TEM) and also SAP Learning Solution(LSO)?
For an example: I have created Training Event Groups, Training Event Types and Courses. If i want to so a paperless ESS, how can i extract all this into the fields which i have designed in my adobe interactive form.
Please help me and guide me along
Thank you in advance:)
Regards,
Jenny

Hi
There are 2 end user possibilities for Learning
One is PV7I and PV8I ITS services which are part of an old ESS role and can be used as integrated ITS versions
any ESS role via HpF or called directly via URL (without a Portal) - this will allow users to book course and events and view/change bookings etc
The other is Business Package for Learning 1.0 which requires a Portal (and other LSO dependancies to run)
this provides a wider range of Learning based activities including booking etc
Best wishes
Stuart

Training and event for ESS/MSS

Hi Expert,
Do we have function for MSS user book course for their subordinate using training and event in portal?
If there is such function, where can I get the documentation? Also, what is the version e.g. WebDynpro, BSP, or ITS version?
Regards,
WaiWeng

Hi WaiWeng,
I'm not sure if you will find a user guide book for end user. So far I have not seen it yet.
We create our own user guide according to the company needs for MSS. You can start off via the link below and with the help.sap.
https://websmp204.sap-ag.de/mss
Go through the help.sap for MSS (http://help.sap.com/saphelp_erp2005vp/helpdata/en/2f/d7844205625551e10000000a1550b0/frameset.htm) and then highlight the functions of MSS which your company wants to implement and then from the help.sap, create your own user guide. Its very comprehensive and you can create afew MSS function user guides within afew hours (and you will be told what you need to lookout for interms of needed configuration in both Portal and your HR backend system).
Hope that helps.
Ray

Can we create a dynamic action for Training and Event Management???

Hi All
i need to configure automatic email generation for an employee when he gets booked for a training program in the training and event management module. can we use a dynamic action for it? and how to configure it?? I also guess that i have to use the Feature MAILS for it. but i am not sure abt it and also not sure how to configure it. I will really appreciate if someone can provide me with a step to step configuration for the same. Its urgently sought.
Thanks and Regards

Notifications in T&E are done through Workflow.Dynamic Actions are only for PA Infotypes.
~Suresh

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

Partial cancellation of attendance for attendee in training and event

Similar Messages

Maybe you are looking for