Partial Clearing

Dears,
I have a requirement from the business on clearing open item with partial payment and show only the balance left in FBL1N.
We pay a down payment of USD 100 on 01st Jul, 2014, and get an invoice on 1st Aug for USD 200  for 30 days, effectively the invoice is due on 1st sep, I apply the advance to clear invoice on 1st sep. The issue is in FBL1N the outstanding shows USD 100 with two open items (USD 100 pmt & USD 200 as Invoice) and if subtotal with inv ref, then the subtotal shows the net of both line items. I would like to know if we can show only one line item with original document with net amount due (200-100). It gives us the real picture on outstanding against each line items.
Thanks,
Lokesh

Hi Lokesh,
If you do partial clearing then system will show two open items i.e.invoice document and payment document. This is SAP standard behaviour.
If you want display one item with net amount. Then in this case you have do residual clearing. At the time of clearing, select invoice document & payment document and click on res.items and here you have to double click on invoice document, system will automatically show the balance amount,simulate and save the document.  In FBL1N report, it will show only one open item with net amount.
Regards,
Mukthar

Similar Messages

  • FI-FM: Partial clearing on account assignment (tcode fmfg_aapay)-No open items found

    Hello!
    We have activated business function PSM_USFED_PPAP3, then :
    -  Federal Government Functionality - activated ;
    - settings in Financial Accounting (new)---> Basic Settings --> Ledgers --> Partial clearing on account assignment:
                   - Activate partial clearing by acc.assignment:   Check
                   - Maintain relevant ledger for Split view : no entries maintained (there is only one ledger "FM", which is the leading ledger, no special purpose ledgers)
                   - Set supported document types: KR
                   - Set payment block: B
    Other settings:
         - FM activated, update profile 000101, document splitting (method 00...012), splitting characteristics: vobelnr, knbelnr, fipos, geber, gsber, fkber;
    document type KR : business transaction 0300 (vendor invoice).
    When we use tcode FMFG_AAPAY no open items are found (message FMFG_AAPAY009), even though there is a vendor invoice posted (tcode FB60, document type KR). The invoice is displayed in FBL1N as an open item and it is split according to the splitting characteristics (e.g. table fagl_splinfo is showing the split vendor items).
    Can you, please, explain why there are no open items found in FMFG_AAPAY?
    Thank you!

    Dear all,
    I am closing this issue since I got the solution apart from the mentioned above.
    There is no need to change the Document Type since that will only change the Document type for e.g. from KZ to ZR, nothing will happen in the accounting entry.
    Solution was there in the "Posting rule" which i defined for making Cheque Payment.
    There are options of "Posting Type" - 1 which is for "Post to G/L Account" - In this case, system will Post the following entry Dr. Outgoing Bank Account & Cr. Main Bank Account without looking for any "Open Item".
    Posting Type" - 4 is for "Clear Debit G/L Account", menans that if you are having "Open Items" and you want to clear those then only use this posting key.
    While testing I had not posted any payment to vendor in Bank Outgoing Account hence no question of having "Open Items" in Bank Outgoing Account. And I had made the selection of "Posting Type" - 4, which require "Open Items" for direct clearing, hence was getting the subject error.
    This is for everybodies information.
    Thanks & Regards,
    Shridhar Sawant
    FICO

  • FI Partially cleared document which table get saved

    Hi,
    I want to know in which table partially cleared documents regarding G/L , vendor and customer is saved?
    Thanks
    Parag

    Hi,
    Initially the original document posted will be in the table BSIS ( eg for 12000). When a partial payment made against the original document , eg here (7000) also will be posted in BSIS, since it is only partially cleared. Now when we pay the balance ( here 5000) , for the same document , all the 3 documents wiill be moved to the table BSAS eg, the 12000, 7000, 5000, since it is fully cleared.
    Regards,
    Smart

  • Item Interest Calculation for partially cleared items

    Hi
    We need to do interest calculation on Customer Line Items. The T Code we are using is FINT. We have set an interest indicator for Item Interest Calculation, with Interest Calculation based on Items Cleared with Payments. The requirement is that Interest should be calculated on even partially cleared items. Suppose a customer invoice is generated on 1.1.2009 for INR 100000 and becomes due for payment on 30.1.2009. Now on 10.2.2009, a partial payment is recieved against this invoice for INR 30000. System should calculate interest on INR 30000 for 11 days. Now again on 20.2.2009, remaining payment of INR 70000 is recieved. In such a case, interest should be calculated on INR 70000 for 21 days @ 1.25% PM. In the current configuration, when we define that system should calculate interest on Open Items cleared with payments, system calculates interest on INR 100000 for 1.25% for 21 days. Pls suggest.
    Regards
    Sanil Bhandari

    Hi u can check all below steps with specific fields i thought it is working perfectly check it.
    1. Define Interest Calculation Types
    here u can enter int rate type as a "S" Balance interest calculation
    2. Prepare Account Balance Interest Calculation
    here u can enter int calculation frequency means monthly or quarterly etc. calander type G, select balance plu int check box
    3. Define Reference Interest Rates
    Here u can enter date currency
    4.  Define Time-Dependent Terms
    here u can enter currency effective from date sequential number term (Debit interest: balance interest calc. or Credit interest: balance interest calc.) referance int rate enter before step what u r defined that one u can enter here.
    5. Enter Interest Values
    here u can enter interest rate for that referance int type
    6. Prepare G/L Account Balance Interest Calculation
    Here u can enter ur g/l accounts
    0001            Interest received (int received a/c)
    0002            Interest paid      (int paid a/c)
    0011            Pt vl.min.int.earned(int received a/c)
    0012            Pst vl.min.int.paid(int paid a/c)
    0013            Pst vl.dt.int.earned(int received a/c)
    0014            Past val.dt.int.paid(int paid a/c)
    0015            Calc.per.int.earned(int received a/c)
    0016            Calc.period int.paid(int paid a/c)
    1000            G/L account (earned)(Loan giving a/c)
    2000            G/L account (paid) (Loan taking a/c)
    after that u can post transaction  execute ur transaction code i thought it is helpful for u
    Regards,
    Nauma.

  • Need BAPI or custom report for the Vendor partial clearing like in F-44

    Hi exports,
    My requirement is for creating a Z-Report for Vendor partial clearing  like it happening in t-code F-44.
    But I didn't find any BAPI or any report for doing partial vendor clearing inside my report.
    Kindly suggest me any BAPI or  some code such that I can able to clear those open items from my report.
    Or suggest me any process such that i can achieve this.
    Thanking you
    Pravasini

    Hi, Sagar:
    Nice to see your thread here
    No matter what kind of transactions you are using, finally, there will be a document posted in General Ledger Accounting, which is what you want. So to read the result, you can always try function module, like FI_DOCUMENT_READ.
    Hope it will help.
    Best Regards, Lawrence

  • How to do partial clearing for noted items?

    Good day,
    One of our client's requirement is the partial clearing/reversal of noted items. When i access F-04 (Post with Clearing), the amount of the noted item once selected, is not reflected in the amount shown in the lower right part of the screen, thus i cannot create partial, residual or difference posting for such items. Are there any workarounds? or standard transaction which can address this requirement?
    Thanks.

    Good day,
    Thanks for the helpful answer.
    But does this mean that documents will just add up because instead of creating a partial clearing, we create another document? is there any way of linking these two documents? by use of reference or something? so that when the client views the documents, he will know the history of the documents?
    thanks. also, im assuming that for example the noted items are "cleared", we have to reverse all the documents created for that particular noted item?

  • Reg: how to reverse the partial cleared items

    Hi Gurus
    1) how to reverse the partial cleared items
    and
    user posted wrogly below:
    2) actually amount received against invoice but she posted in f-02 insted of f-28 so how to reverse this

    Hi,
    I think you should do the following:
    1. T.code - FBRA - to reset the cleared document.
    2. T.code - FB08 - to do the reversal after resetting.
    See if it helps.
    Regards,
    SGP

  • Partial Clearing of Invoices

    Hi Experts,
    I am unable to clear an open item partially using payment lot when I give only the print doc number in selection value -it goes into postprocess. However, when I provide the total open amount it gets cleared.If I give the document number in the selection field then the item gets partially cleared.
    The requirement is while posting payment lot the user will only provide partial amount and the print document number(XBLNR) in the payment lot item list.
    I think the clearing steps in my clearing variant is not configured to meet the requirement above. Someone please advice.
    Thanks in advance
    Satyajeet

    Hi Satyajeet,
    First you need to find out the clearing variant which you have assigned with the incoming payments. You will find it in the following path:
    SPRO-Financial Accounting-Contract Accounts Receivable and Payable-Basic Functions-Open Item Management-Define Specifications for Clearing Types-Define Defaults for Incoming Payments.
    After you get the clearing variant for incoming payments, you have to see the clearing steps of it. You will find it in the following path:
    SPRO-Financial Accounting-Contract Accounts Receivable and Payable-Basic Functions-Open Item Management-Clearing Control-Clearing Variants-Define Clearing Variants.
    Please select the clearing variant and double click on the clearing steps at the left hand side. In the 'Group Rule', you will see a field called 'Amount Rule'.  If it is set as '0' (Clearing only possible when amounts are the same), please delete the value and make it blank. Save the clearing variant now.
    Hope this will help.
    Thanks.
    Nirmalya

  • LZW algorithm for data compression with partial clearing

    hello,
    i want to implement zip utility and in that i have to develop LWZ algorithm with partial clearing i.e unshrinking method in JAVA
    i am not getting information anout unshrinking on net.
    please anyone can help me.

    LZW had patent issues, so was replaced. I assume you don't want patent issues.
    The new algorithm is already programmed for you via the Inflater and Deflater classes in java.util.zip. Unfortunately the doc is nearly incomprehensible. Fortunately for you several of us have worked together and got it to work. Go to Advanced Language Topics and search for topics on Inflater. I've posted code there that is dead simple to use and would be a good foundation for any zip-like utilities.

  • Function Module for Post Partial Clearing

    Dear Expert,
    Is it possible to use FM POSTING_INTERFACE_CLEARING to clear partial open items ? If yes, kindly suggest what parameters need to be passed.
    But should this is not possible, could you suggest  any function modules that can do partial clearing ?
    Thank you

    Dear expert
       Paritial Payment:
    A partial payment is a payment that is posted to an account without any open items being cleared. You assign this partial payment to an open item. When you post the partial payment, the system marks the document number of the original open item in the line item for the partial payment. The original open item and the partial payment remain open.
    Suppose original invoice is with 1000 /-
    current payment is 500 /-
    then it will show both 1000 and 500 as open items with balance 500
    http://help.sap.com/saphelp_47x200/helpdata/en/01/a9bb1f455711d182b40000e829fbfe/frameset.htm
    Residual item:
    A residual item results when a payment is made for less than the actual amount outstanding. You clear the original open item, and the system posts a new open item. This new open item is for the same amount as the original open item minus the amount paid.
    Suppose original invoice is with 1000 /-
    current residual payment is 500 /-
    then balance 500 only shown as open item (New line item created during residual payment )
    http://help.sap.com/saphelp_47x200/helpdata/en/01/a9bb1f455711d182b40000e829fbfe/frameset.htm
    Regards
      Ajeesh.s

  • FF68 REQUIREMENT - PARTIAL CLEARING OF INV DOC

    Dear Friends,
    We are in Ecc 6.0, While processing FF68,
    Requirement:-
    1) When we give check number against a document number system should post the amount in Partial clearing and keep the    
        balance in the same document number.
    2) Check number should also be updated in customer line item in any filed i.e, assignment filed (Same as Updation in bank line item)
    We have configured as below.
    Created a posting rule 1000 with posting key 40 and posting type 8 (Clear Credit Sub ledger a/c), but while processing the output in system, system is asking a Co object (is it only because of Profit center and segment are mandatory for splitting)
    Where we need to  do the settings or this requirements.
    Regards,
    Sandeep

    Hi Satyajeet,
    First you need to find out the clearing variant which you have assigned with the incoming payments. You will find it in the following path:
    SPRO-Financial Accounting-Contract Accounts Receivable and Payable-Basic Functions-Open Item Management-Define Specifications for Clearing Types-Define Defaults for Incoming Payments.
    After you get the clearing variant for incoming payments, you have to see the clearing steps of it. You will find it in the following path:
    SPRO-Financial Accounting-Contract Accounts Receivable and Payable-Basic Functions-Open Item Management-Clearing Control-Clearing Variants-Define Clearing Variants.
    Please select the clearing variant and double click on the clearing steps at the left hand side. In the 'Group Rule', you will see a field called 'Amount Rule'.  If it is set as '0' (Clearing only possible when amounts are the same), please delete the value and make it blank. Save the clearing variant now.
    Hope this will help.
    Thanks.
    Nirmalya

  • Partial clearing of pacman cache

    Is there a way of partially clearing the cache of old packages. I'll explain, every now and then I have to downgrade a package, due to some sort of issue, (usually wine or ati packages). Down grading to the previous version is usually good enough, but sometimes I need to go back further. So that I can do this I don't clear the cache to frequently.
    Now I know that doing a "pacman -Sc" will remove all the old packages upto the currently installed one, and a "pacman -Scc" removes everything. But it would be nice (for me anyway) if you could add a parameter to the "c" to leave that many versions of a package in the cache
    example "pacman -Sc=3" this would leave the 3 latest versions of packages alone, but clear out anything older. If there wasn't 3 versions of a package, in the cache, then it would be left alone.
    People could keep the number of copies that they feel comfortable with, or not specify a number and things would work as they currently do.
    Does anyone know of a way to do a partial clearing alongs the lines discribed?
    Thanks

    test1000 wrote:
    you could always go into /var/cache/pacman/pkg/ and delete the packages you don't need.
    posting your suggestion to the bugzilla might yield better chances of it being implemented as a feature.
    Thanks for the input, I was just asking to see if anyone new of a way to achieve this currently, and also to see if it other thought it would be useful.

  • Partial clearing FB05

    Hi
    I made partial clearing customer and after I created document and want to make second clearing
    bu in transaction FB05 in field "Partial payment" is always set to 0.00.
    I turn on with reference option in FB00 and this is not any affecct.

    No Daniele,
    pls read the docu of rfbibl00:
    You can also use a BSELP structure to select a specific line item in the form <document no.><fiscal year><line item no.>. The document number must have 10 characters and the line item 3, and the preceding zeros should also be entered.
    Example: Selecting the third line of document 0000222222
    from fiscal year 1997.
    BSELP-FELDN_1 = "BELNR"
    BSELP-SLVON_1 = "00002222221997003"
    regards Andreas

  • Partial Clearing using FP05

    Hi Experts,
    I am facing a very peculiar problem . We have configured a clearing variant which allows partial clearing of invoice.
    Someone has changed the configuration now and every time when I post a Posting lot the invoice is getting cleared fully. Its peculiar because the  in the GL line item I can see that the partial amount is posted to the bank clearing account  and the remaining amount of the invoice is posted to another GL.
    I want to understand where is such configuration point where we can automatically post the difference to another GL.
    Thanks & Regards
    Satyajeet

    config in posting are 0060

  • Partial clearing by rfbibl00 program

    HI,
        My requirement is that i want to create interface between non-SAP & SAP system through BAPI for tcode F-28.
    To clear the customer incoming invoice by partial clearing. I searched in  all threads it can achieve by only by standard BI rfbibl00 program , In that documentation  didnt say about partial clearing any where. please guided how to achieve partial clearing for in rfbibl00 program.
    I will gone through the documentation very well . please help me for my requriment .
    Thanks in advance.

    Hi
    I believe partial clearing is not supported by RFBIBL00
    Max

Maybe you are looking for