Partial delivery not allowed for a STO

Hi Gurus,
We wanted to restrict the system so that it should not create deliveries with partial quantity for a STO. The delivery should be creaated if there is enough stock to fulfill the STO otherwise it should not create a delivery.
I set the partial delivery indicator in customer master for teh receiving plant but still it is allowing partial delivery. ANy clue? Is there any otehr setting we need to do?
Thanks for responce in advance.
KHAN

Hi
I think that you have had your question answered so if you are happy with this can you please award points if you want to but mainly can you please mark your question as answered so that it is easier to navigate around the open questions in the forum as the number of pages are growing and growing and it takes too long to go through everything especially if a satisfactory answer has already been given and people like me who want to help will give up and so some people may not get any help.
Thanks for this
Frenchy.

Similar Messages

  • There's an error while delivery note creation for STO order

    There's an error while delivery note creation for STO order  even stock available in unrestricted stock
    Edited by: sharma aman on Nov 8, 2011 9:00 AM

    Dear Sharma Aman,
    Check whether the following link helps you.
    Mesaage : while creation of delivery : An item with no delivery quantity .)
    Please search in google with the error message and definitely you will get some older posts in SDN which is solved.
    In that case , you need not wait for the solution as it is already available.
    If the solution provided do not suit you, then post it in SDN so that it will be a learning for others.
    Try to search in the forum or in google before posting further queries
    Thanks & Regards,
    Hegal K Charles

  • Error : T161W: Vendor+subcontracting vendor not allowed for 2-step stock tr

    Hi Gurus,
    When we creating a STO to sub contractor vendor ( in the delivery address tab we are entering the vendor # and activating the SC vendor check box)we are getting the error message as "T161W: Vendor+subcontracting vendor not allowed for 2-step stock transfer".
    Message no: MEPO140
    Note:
    The STO is creating with out error in ECC 5.0 for the above scenario but when i'm  trying  the same in ECC 6.0 in another system I'm getting this error, Can any one please advice.
    Thanks in advance,
    Sai

    Hi Charlie
    I had same issue and we sloved it. but i have one more issue here.
    We have created Po and SC Vendor is not check marked. When we go into the change mode of Po i can't see the field at all. but its availalbe in disply mode.
    I am using ECC 6.0, Please suggest why this is happening. I need to put check mark for SC vendor.
    thanks,
    Raju

  • Combination of GR/IR Control not allowed for External Services-SRM PO error

    Hi All,
    SRM 5.0 ECS   R/3 4.6C
    We have a service PO, for which an error Combination of GR/IR Control not allowed for External Services is being displayed.
    The PO is in error in process at this moment. And is not in R/3
    On SRM PO we have Confirm Performance of Service/Goods Receipt checked and Invoice Expected checked.
    Confirmation-Related Invoice Verification  is not checked. Any thoughts on this!!
    Thanks
    Krishna

    Hi
    <u>Please go through the following SAP OSS Notes -></u>
    Note 725824 - MB5S: Error with purchase orders for external service
    Note 781014 - Clearing values in purchase order currency are too high
    Note 991800 - MB5S: Error in delivery costs (2)
    Note 960789 - Wrong Values in MM Document for Service Based Invoice
    Note 778562 - MM-IV: invoices are entered before the goods receipt
    Note 578531 - Incorrect FM update for service purchase orders
    Note 635864 - ME2S: Invoice value is calculated incorrectly
    Note 570409 - Unplanned account assignment in invoice for service PO
    Note 545684 - MIR4 for SRV: Incorrect data displayed if deletion indicator
    Note 544567 - Transaction MIRO: incorr. default values at (parked) invoice
    Do let me know.
    Regards
    - Atul

  • Rebate-Manual payment is not allowed for this agreement type

    Hi,
    While processing the Rebates, after the Sales cycle till Billing document, when i i try to process the partial settlement it is givin a message as "Manual payment is not allowed for this agreement type"
    could you please suggest.
    Regards
    AS

    Hi AS
    If you want to do manual payment then in VB)2 select the Agreement type and then in that agreement type check wheather Manual rebate order type has been assigned or not and Manual payment has been checked or not . If they are not maintained and Checked  then maintain the rebate document type and check the box Manual accruals and then you can do Manual Payment for that agreement
    Regards
    Srinath

  • "Create Delivery" Not Allowed

    Hi,
    I have created an order, when I tries to do the delivery for this I
    gets the error : "Create Delivery" Not Allowed ( Sys.Status EXLS
    Object VB0000008166000010 ). If you need the screen shot, I will send that too.
    Can anybody help me on this, I am facing this issue from quite a long time.......
    Thanks in advance.

    Hi Naveen,
    Thought might help you.
    Delivery Issue
    Regards
    NP

  • Create Delivery not allowed-status

    for an SD Order (Make to Order scenario), we are getting an eror that : ""Create delivery" not allowed (Syst Status Cost, object VB001776271717).  I am unable to understand this.  Can you please guide me.

    Hi,
    I am also getting the same error and i did costing from CK51N but still the same error.
    "Create delivery" not allowed (Sys. status Cost, object VB0000060000000010)
    Message no. BS051
    Kindly advise.
    Thanks,

  • "Prodcut allocation check not allowed for ATPcat.'BR' and application".

    SAP Experts,
    Whenever, I delete a delivery, I am seeing a pop-up message with the information message as "Prodcut allocation check not allowed for ATPcat.'BR' and application". Is this a standard functionality. We dont have ATP Check/Allocation check during delivery delete. How come we get this message ?
    This is something curious. Can someone help me on this please ??
    Thanks,
    Babu Kilari

    Delete the ATP category BR from check control for A (Sales document). It seems when you are deleting a delivery the transfer of requirements settings pop this
    Let me know if you are successful
    Regards,
    Loknath

  • Posting in foreign currency not allowed for external tax system

    Hello all,
    I created a purchase order for inter-company stock transfer. Then created a corresponding outbound delivery and goods issue using  VL10h and completed goods issue. Then I completed good receipt using MIGO. When I was trying to create a sales order I got this message "Posting in foreign currency not allowed for external tax system". What could be the reasons for this message.  The message number said FS885.
    One final note. I am able to create Billing document with manual batch number input in Delivery document item. But when I am using Batch split I am not able to generate invoice. Can anyone tell me what could be the problem here.

    Hi Samir,
    The Goods Received NI (Allocation Cost Account) need to be balaned in Local and System Currency as this is a Multi Currency account and these are the currencies that Business One will offer reports in.
    The Foreign Currency for this account is irrelevant as you can never get a balance in FC for a multi currency account, neither will you find any reports for this. 
    If the client insists you can create a manual Journal entry in FC only to correct this. Business One does not offer any functionality to correct the Foreign Currency in this scenario. (like Exchange Rate difference for Local Currency and Conversion Differences for System Currency)
    To do the manual JE open the form settings and the tab 'table', here untick the box 'From FC Field'. This will enable you to create a FC JE only.
    Hope it clarifies the issue.
    Jesper

  • WM movement type 255 not allowed for warehouse number 008

    Hi,
    Error message "WM movement type 255 not allowed for warehouse number 008" pops up during creation of outbound delivery. I checked the schedule line for this sales order, it was actually tagged to movement type 631 instead of 255. There ain't any movement type 255 at all. How to solve this?
    Thanks.

    Hi,
    Check in Customizing for Define Movement Types where for the given warehouse number movement type 255 is assigned.
    Path is,
    Logistics Execution - Activities - Transfers - Define Movement Types.
    Check for 008 Movement 255 is assigned or not.
    Thanks
    Krishna.

  • Negative quantity not allowed for Put Away Planned

    Dear Experts,
    I'm trying to activate the PDI document but the system show the error message: Negative quantity not allowed for Put Away Planned.
    I was looking the document flow from the item 10 and I saw there is one task was created with quantity "1 box" and the same document was cancelled but the quantity "2 box" was cancelled. I believe because of this is happening the error.
    All items from my HU is with the same problem, duplicate the quantity during canceling.
    Somebody can give me advice how fix it.
    I found a SAPNote but Note 1674037:Negative Put Away Planned quantity (PWP) due to "Store HUs" but I need a workaround to fix my actual PDI and finish the process.
    Regards,
    Alan Mattos

    Hi Petr,
    I checked the transaction SMQ2 and I dont have anything stuck there. Then I tried to change de deliveryquantity but the field quantity isn't available to change. My PDI document already been the Goods Receipt Status "Completed". I try to reverse this document and the system show the message: Delivery is locked (Posting Not Possible). I believe its happening because the PDI isn't active.
    Do you have other idea ???
    Thank you a lot for your help. 

  • Create delivery not allowed ( Sys. Status EXLS,object vb0004321713000010

    Hello SAP gurus,
    I am getting the fllowing error while creating a delivery. The delivery message says  create delivery not allowed ( Sys. Status EXLS,object vb0004321713000010)
    Diagnosis : the status check for the status object VB0004321713000010 indicated that the procedure "create delivery" cannot be performed because Sys. status EXLS forbids it
    System response: procedure create delivery is not performed
    Procedure
    If procedure is to be performed, the  Sys. status EXLS of the object VB0004321713000010 must be reset.
    Other statuses thatn Sys. status EXLS can also prevent the procedure. This message does not tell you all status which currently prevent procedure create delivery.
    Can you please tell me how to resolve this issue?

    Hi
    It seems that status profile is activated.
    So goto SAles order header or Item level and goto status tab and release the sales order by clicking on the status EXLS
    regards
    Prashanth

  • "Create delivery" not allowed (Sys. status Cost, object VB0000000237000010)

    Dear All,
    While creating delivery i am getting the error saying as below,
    "Create delivery" not allowed (Sys. status Cost, object VB0000000237000010). and allowing me to the process delivery. we are the scenario for make to order process.
    please suggest the solution.
    kamlesh panchal

    Not clear on your comments
    Create delivery "not allowed" (Sys. status Cost, object
       VB0000000237000010). and "allowing me to the process delivery"
    When the error message says creating delivery is not allowed,  then how are you able to process delivery.
    Nevertheless,  go to VA02, input the sale order reference and execute. From top menu bar, click on "Goto -- Header -- Status". There again click on "Object status" and check whether any lock is there. If so, change it and then retry
    thanks
    G. Lakshmipathi

  • Payment method(s) are not allowed for this program / Program RFFOAVIS_FPAYM

    Dear Friends,
    In Se38  abap editor, I entered the program RFFOM100, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Payment method(s) are not allowed for this program'.
    Payment method S is not used in F110, It was not mentioned in vendor master or vendor invoice.It is not mentioned in fbzp in bank determination. When i tried to delete payment method 'S' the system shows a message Payment Method S is being used in the company code.
    In  the program RFFOAVIS_FPAYM, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error  'Program RFFOAVIS_FPAYM: No records selected'. But there open items or invoices.
    Please suggest how to resolve the errors.
    Regards
    Sridhar

    Hello,
    Why are you directly executing these programs?
    You will not expect these program to execute directly by going to SE38.
    I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
    For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
    Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
    The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
    Hope this is informative and solves your issue.
    Regards,
    Ravi

  • The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTR

    Hi all,
    BAPI' BAPI_MATERIAL_SAVEDATA' throws error the below error while creating material.
    'The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTRL_CODE'
    Any idea abt this error.
    Regards,
    Thiyagu

    Hi,
    As this BAPI is triggered from external sytem that by client in production environment , I would not be able to dig it further.
    Thats why I asked if anybody confronted the same error previously.
    Thanks for suggestion.

Maybe you are looking for

  • Responses going into wrong form

    I created a form, and then copied it and renamed it.  The original form is for vendors to view and play with, for a proposal process.  The 2nd form is for people to actually respond to.  I advertsie the 2nd form on a website, and all the links are co

  • SAP tab in Crystal Reports 2013 issue

    We are using SAP Crystal Reports 2013 SP3 to build reports on BEX queries (BW 7.2). Creating a report via 'File' --> New connection --> BW MDX driver works fine, I can select bex queries & cubes and see the data. However SAP provided tab 'SAP' does n

  • I am signed to the VPP and need to know if I can purchase apps on mass via purchase order

    I am signed to the Volume Purchasing Programe (VPP) and need to know if I can purchase apps on mass via purchase order as a credit card payment will not be possible. Thanks

  • Problem to identify values in a case statement.

    Hi Friends, Total number of records in my report should be divided by 5 and to be alloted into 5 grades in Grade column. This is what I have done so far in my report with following layout. S.No - Col A - Col B - Col C - Grade ( Colums A,B,C will be h

  • Store notifications after Black update

    Hi There, I no longer seem to get notifications of app updates in the store after the Black update on my 925, only by selecting an app in the store which I have already installed do I see if there's an update. I've looked around the phone settings to