Partial Eliminations

Hello guys,
I want to apply eliminations postings based on a percentage, is "Consolidation of investment" the only option to do so ? Is there a way of doing it using simple interunit eliminations ?
If yes, where (in customizing) should I enter the rate?
Thank you in advance,
Best regards,
Pascal.

Hi Pascal,
Actually, it's not a standard functionality.
But I used to implement very simplified version of consolidation of investments.
You proper noticed that for elimination of investment and equity in the simpliest cases (no goodwill, no complex movements in Groups) is enough one-sided elimination. All amount on equity accounts were placed on a separate contra-account in capital.
Then  a special reclass extracted minority interest from this contra-account.
Percentage was assigned to a new ANI account. Actually it's a real ANI like the sum of all P&L accounts but  outside the P&L hierarchy.

Similar Messages

  • Illustrator CS3 .ai's with XML?

    We are now experiencing majorly insane issues with our .ai files, which appear to involve XML tagging. Here's what's going on:
    +when copied as a complete object, a box of text behaves normally. (though it takes a very long time to copy and paste)
    +when words within a text box or line of text are copied, they now paste as 100+ lines of code.
    In Illustrator - The code does not contain the originally copied text when pasted alone or into exiting text elements
    In Text Edit - The code contains the original copied text at the top, but does not contain all of the code seen in illustrator.
    +when objects are copied and pasted into new documents, they import 30+ rows of swatches. Copying and pasting takes several minutes, even for a simple 4 anchor box.
    +File size is massively inflated (a 1MB file becomes a 32MB file)
    !! no information appears in the variables window !!
    Issues can be partially eliminated by returning to Adobe Illustrator 10, however irreparable damage is done to the file in the process.
    any thoughts?

    Hiya,
    welcome to discussions and to the apple world. Have you tried to update to V.13.0.2?
    http://www.adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh
    NB: Not sure if 13.0.1 fixes it or if you need 13.0.2. But try to install it, launch illustrator and see if you have the same issues.
    Also, Versioncue could cause an issue (as demonstrated in thread 14). I'd recommend to use the Adobe Auto updater to update your entire suite
    Message was edited by: Alexandre
    NB2: sometimes, disk permissions may be an issue, too. Run disk utility (especially before updating any Apple software http://support.apple.com/kb/HT1452 )
    Message was edited by: Alexandre

  • WM problem - material is locked in 922 TR-ZONE

    Dear All,
    We are facing a problem.
    There were MB1B 344 booking and their WM counterpart wasn't executed well. The result that we had stock in 922 TR-ZONE (example):
    <b>922 TR-ZONE</b>
    materialA 'blocked' 10 pc
    materialA 'free' -10 pcs (free means stock for unrestricted use)
    <b>WH</b> (location in WH)
    materialA 'free' 1000 pcs
    I wanted to move 10 pcs 'free'  to 922 TR-ZONE. In the first step I moved 5 pcs of them:
    <b>922 TR-ZONE</b>
    materialA 'blocked' 10 pc
    materialA 'free' -5 pcs (free means stock of unrestricted use)
    <b>WH</b> (location in WH)
    materialA 'free' 995 pcs
    But after that I'm not able to move 'free' stock to 922 TR-ZONE any more because the material is locked in 922 (I can see it in LT10). (confirmations are OK)
    (I can move the 'blocked' stock from 922 TR-ZONE)
    There was problem with materilB also and similar bookings were carried out and the remaining minus 'free' quantity in 922 TR-ZONE became locked too.
    What is the reason? How can we solve this?
    Please help in this issue.
    Thanks,
    Csaba

    Dear Jürgen,
    Thanks for your help.
    I think you are right:
    1. Quality guys should have do MB1B 344 counterpart in WM
    2. I shouldn't have posted stock to 922 TR-ZONE and I sohould have used LU04.
    I think if I had moved from normal bin the whole qty to 922 TR-ZONE to eliminate the whole negative stock at once I would have succeeded.
    I guess the problem is because I just partially eliminated the negative stock in 922 - that is why the remaining qty is locked.
    I don't know exactly why it is so, but the situation is that this problem do exist and I have to solve it somehow.
    (my idea was to eliminate the negative 922 qty and after that move the blocked qty from 922 to its destination).
    What can I do now?
    thx
    Csaba

  • Problems with iTunes after installing an SSD/HDD on my Macbook Pro

    Hello everybody,
    I decided to install a SSD on my Macbook Pro, replacing the optical drive with it, then I set up the new disk to be the boot drive and left the HDD on its place to store media and stuff.
    Obviously, my library now is on the HDD, but when I try to delete a file via iTunes I get a partial elimination, or no elimination at all. The songs remain on their place on iTunes. I have no idea why. My only theory is related to the TRIM option: I have a small application that enabled it on both drives, so maybe it may be a pain for the HDD?
    Any help?
    Thanks!

    First, spinning hard drives don't use TRIM, so you can't enable it on your HD, only your SSD.
    Is your SSD your boot drive? Where do you have your iTunes media stored? There's a right way and a wrong way to change the location of the media - see http://support.apple.com/kb/ht1449.
    Good luck,
    Clinton

  • I wanted to restore my ipod touch 4G, but everytime it is restoring with the apple logo, the screen goes partially white and my itunes says "error 9"... what should i do?

    I wanted to restore my ipod touch 4G, but everytime it is restoring with the apple logo, the screen goes partially white and my itunes says "error 9"... what should i do?
    plz answer me~

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    http://support.apple.com/kb/TS3694#error9

  • Sales Order u0096 Invoice first and partial deliveries Later?

    Dear all,
    I have a situation where the customers will make an order from us and they will pay us in full upon making the order. As such, we are required to invoice them first and make the shipment later.
    They required us to ship the goods to them in partial shipments. How should we handle this in SAP?
    With what order type can I invoice in full first, then make partial deliveries?
    Best Regards,
    Junwen

    Hi Siva,
    Now I agree with you. SO -> Pro-forma -> Delivery -> Invoice. Not bad.
    I suggest them instead of adding one more step. They can customize a layout for SO so that "pro-forma" step can be eliminated
    The print-out (or output) of SO can be designed to look like a pro-forma.
    After all Pro-forma is not going to serve any other purpose.
    So we are back to square-one
    SO(with customized layout) -> Delivery -> Invoice
    Cheers
    Ashish

  • Partial delivery per item in sales order and ATP - schedule lines

    Hi,
    I've problem regarding ATP- schedule lines and partial delivery flag.
    In sales order there is flag Partial delivery per item B / 1 . That means create only one delivery even with quant 0. That comes from customer master or customer info-record and it is OK.
    Please look at next example.
    Customer requires:
    10 PCS of materail A on date X. Only 5 PCS are available on date X.
    10 PCS of material B on date X 0 PCS are available on date X, 10 PCS are available on date Y.
    So if we create outbound delivery on date X it will contain only 5 PCS of material  A. No successive deliveries will be created for material A because of the flag B/1. That item is closed.
    Problem is with material B.
    The sales order will be open because of material B and on date Y we can easily create another delivery with 10 PCS of mat B.
    That is wrong. Agreement with customer is only one delivery for ALL items in sales order. If we create delivery on date X it should contain only materials which are available on date X and sales order should close.
    Do you know how to fix this problem?

    Hi,
    I've think you didn't understand my requirement. I allways get schedule lines but they are confirmed on different dates.
    Example in same sales order we have:
    Schedule line for item A:
    DATE X confirmed quantity 10
    Schedule line for an item B.
    DATE X confirmed quanitity 0 (zeroe)
    DATE Y confirmed quantity 10.
    I would like to create outbond delivery on date X with:
    item A quantity 10
    item B quantity 0.
    And if that hapens than B/0 rule will work or reference customzing that you suggested before. So order will be closed because all items are processed or referenced once.
    Do you know how to do that?
    Regards

  • Getting error in XMLP while compare a Tag value to partial value

    Hi All,
    We are working on 'AP Check Print Report' which is XML based Report and the output is in the PDF format.
    We are facing a problem when we are suppose to compare a Tag value (DocumentNumber/ReferenceNumber) to a partial value('%TDS-CM%') as below,
    <?if:DocumentNumber/ReferenceNumber NOT LIKE '%TDS-CM%'?>
    Can someone help me, how to achieve it as well as whether it can be done or not.
    Thanks in advance
    Abhishek

    Have a look at these threads:
    Re: Using Wild Card % in the IF condition of RTF templates
    Re: Syntax for IN / NOT IN Commands
    Thanks!

  • Partial Multibyte Character Error

    Hi All,
    I am getting following error while running a report in OBIEE 11 G.
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 29275, message: ORA-29275: partial multibyte character at OCI call OCIStmtFetch. [nQSError: 17012] Bulk fetch failed. (HY000)
    NLS_LANG Paramters is set at the Oracle database 11.
    [NLS_LANGUAGE].[NLS_TERRITORY][NLS_CHARACTERSET]----------->AMERICAN.AMERICA.AL32UTF8
    Any help in this.

    Hi,
    It's seems are you using char function in your report?
    If yes, Change the char size .
    ex: cast(column name as char).
    A. Cast(column name as char(300)).
    I am not sure this is what your looking so far.
    Award points it is useful.
    Thanks,
    Satya

  • I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down eliminate

    I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate

    I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
    You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots.  Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
    See Pondini's page for more explanation:   What are Local Snapshots?   http://pondini.org/TM/FAQ.html
    I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
    You have tested the library on the external drive, and so your photos are save there.  
    The local TimeMachine snapshot probably now contains a backup of the moved library.  Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

  • Não é permitida a solicitação de autorização de eliminação para a NF-e

    Prezados, boa tarde.
    Muito provavlmente estamos com um problema gerado pelo usuário, não encontrei caso semelhante no forum.
    O usuário gerou uma Nf de devolução a fornecedor e entes da autorização da SEFAZ solicitou estorno.
    O status está parado no monitor do ERP e no GRC os status são os seguintes:
    Status NFe GRC
    Stat processo   5 - Resultado recebido
    Cod status   102 - Inutilização de número homologado
    Erro ERP  109 - Erro de validação: campo Nº. Campo é obrigatório e não pode ficar em branco. (campo IS_NFE_HEADER-E1_NRO, ID campo E007)
    Se tento atualizar a linha no " Erro atualização status ERP" aparece a mensagem:
    "Não é permitida a solicitação de autorização de eliminação para a NF-e"
    No monitor do ERP a NF está sem log de autorização da SEFAZ
    Tks,
    Rodrigo
    ECC 6.0
      NFe 1.0

    Olá Rodrigo.
    Se eu entendi você solicitou a inutilização de um documento com erro de validação. Isso? Após executar o programa /XNFE/UPDATE_ERP_STATUS_DIAL apareceu algum log na J1BNFE?
    Qual SP do ERP e GRC?
    Existem algumas notas que tratam do log e outras que tratam da solicitação de inutilização com erro de validação.
    Abraço
    Eduardo Chagas

  • How about use partial key to loop at a hashed table?

    Such as I want to loop a Internal table of BSID according to BKPF.
    data itab_bsid type hashed table of BSID with unique key bukrs belnr gjahr buzid.
    Loop at itab_bsid where bukrs = wa_bkpf-bukrs
                              and    belnr  = wa_bkpf-belnr
                              and    gjahr  = wa_bkpf-gjahr.
    endloop.
    I know if you use all key to access this hashed table ,it is certainly quick, and my question is when i use partial key of this internal hashed table to loop it, how about its performance.
    Another question is in this case(BSID have many many record) , Sorted table and Hashed table , Which is better in performance.

    You can't cast b/w data reference which l_tax is and object reference which l_o_tax_code is.
    osref is a generic object type and you store a reference to some object in it, right? So the question is: what kind of object you store there? Please note - this must be an object reference , not data reference .
    i.e
    "here goes some class
    class zcl_spfli definition.
    endclass.
    class zcl_spfli implementation.
    endclass.
    "here is an OBJECT REFERENCE for it, (so I refer to a class) i.e persistent object to table SPFLI
    data oref_spfli type ref to zcl_spfli.
    "but here I have a DATA REFERENCE (so I refer to some data object) i.e DDIC structure SPFLI
    data dref_spfli type ref to spfli.
    So my OSREF can hold only oref_spfli but it not intended for dref_spfli . That's why you get this syntax error. Once you have stored reference to zcl_spfli in osref then you will be able to dereference it and access this object's attributes.
    data: osref type osref.
    create object osref_spfli.
    osref = osref_spfli.
    "now osref holds reference to object, you can deference it
    oref_spfli ?= osref.
    osref_spfli->some_attribute = ....
    OSREFTAB is just a table whose line is of type OSREF (so can hold multiple object references - one in each line).
    Regards
    Marcin

  • Fields not getting rendered based on fire partial action

    Dear Friends
    I have req like based on the selected value in message choice input (UOM), the other values(BOX,EACH,VOLUME) in page sholud render .
    These are my codes in AM and CO.
    ******************************AM***********************
        public void xxcreaterow() {
            OAViewObject vo = getuomVO1();
            System.out.println("am is getting executed");
            //Number=null;
             Number val = 1;
                if (vo != null)
                  if (vo.getFetchedRowCount() == 0)
                   vo.setMaxFetchSize(0);
                   vo.executeQuery();
                   vo.insertRow(vo.createRow());
                   OARow row = (OARow)vo.first(); 
                    //  row.setAttribute("RowKey", new Number(1));
                      row.setAttribute("RowKey", val);
                      row.setAttribute("BoxAttr", Boolean.FALSE);
                      row.setAttribute("EachAttr", Boolean.FALSE);
                      row.setAttribute("VolumeAttr", Boolean.FALSE);
    ************************   CO *********************************
      public void processRequest(OAPageContext pageContext, OAWebBean webBean)
        super.processRequest(pageContext, webBean);
          OAApplicationModule am = pageContext.getApplicationModule(webBean);
          OAViewObject vo = (OAViewObject)am.findViewObject("uomVO");
          am.invokeMethod("xxcreaterow");
       * Procedure to handle form submissions for form elements in
       * a region.
       * @param pageContext the current OA page context
       * @param webBean the web bean corresponding to the region
      public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
        super.processFormRequest(pageContext, webBean);
         OAApplicationModule am = pageContext.getApplicationModule(webBean);
         OAViewObject vo = (OAViewObject)am.findViewObject("uomVO1");
                 OARow row = (OARow)vo.getCurrentRow();
                      if ("HandleUom".equals(pageContext.getParameter(EVENT_PARAM)))
            if (pageContext.getParameter("UnitOfMeasure").equals("Box"))
             row.setAttribute("BoxAttr", Boolean.TRUE);
                row.setAttribute("EachAttr", Boolean.FALSE);
                row.setAttribute("VolumeAttr", Boolean.FALSE);
               else
                     row.setAttribute("BoxAttr", Boolean.FALSE);
               if (pageContext.getParameter("UnitOfMeasure").equals("Each"))
                row.setAttribute("BoxAttr", Boolean.FALSE);
                   row.setAttribute("EachAttr", Boolean.TRUE);
                   row.setAttribute("VolumeAttr", Boolean.FALSE);
               else
                     row.setAttribute("EachAttr", Boolean.FALSE);
               if (pageContext.getParameter("UnitOfMeasure").equals("Gallon"))
                row.setAttribute("BoxAttr", Boolean.FALSE);
                   row.setAttribute("EachAttr", Boolean.FALSE);
                   row.setAttribute("VolumeAttr", Boolean.TRUE);
               else
                     row.setAttribute("VolumeAttr", Boolean.FALSE);
    How to resolve this plz help.
    Thanks
    Aravinda

    Have a fire partial action event enabled on text field 2, capture the event in processFormRequest of CO, throw an exception using throw OAException when textfield1 < textfield 2 or your required condition is met. You don't need javascript for this. I don't recommend using javascript in OAF. You have most of the features available in OAF (except popup alerts though which can be achieved as mentioned above but no popup window).
    Thanks
    Shree

  • Double figure for Elimination

    Hi all,
    This is my detail explaination regarding this issue.
    When I run balance carryforward for period 1/2008, figure for posting level 20 will carryforward.(RM27,441.0). This is IU figure from period 16/2007. But after I run task IU Elimination, the carryforward figure will display like double posting.(RM54,882.00)
    i.e
    C4000 15053100 C4400 00      RM 27,441.00 RM 27,441.00
    C4000 15053100 C4400 00      RM 25,855.92 RM 25,855.92
    C4000 15053100 C4400 20 E1 RM 0.00         RM 54,882.00
    C4000 15053100 C4400 20 E1 RM 0.00         RM 25,855.92-
    My method config for IU Task.
    Use for selection 1 and 2 (Two sided elimination)
    Consolidation Company [Our subsidiaries]
    Item [FS Item]
    Trading Partner [Our subsidiaries]
    Posting Level [00-12]
    Document Type
    Posting Level - Two-sided Elimination Entry
    Balance Check - Error when balance not equal to zero
    Application - Other
    Posting - Automatic Posting
    Inversion - Automatic Inversion Also in New Fiscal Year
    Hopefully all of you will help me to solve this issue...
    Thanks you.
    Azie

    Hi Azie,
    First of all, you ought to understand if this possible double amounts came from the BCF or not.
    If not, then I would thouroughly examine the entries of the I/C elimination task.
    I met several times the situations when a wrong strategy of writing differences lead not to a elimination, but just to the opposite: the doubling of difference. For me it looks like very much as your situation.

  • Windows PARTIALLY reconises iPOD - Yes to iTunes, No to Windows Explorer...

    Right, I've read all of the posts on the fourms about connection to Windows, but this one is slightly different.
    My ipod nano (4gb), has been working just fine for a couple of months (has just been replaced by Apple). I use it primarily for music through iTunes, but also sometimes as a portable hard drive.
    All of iTunes and music is stored on my PC at home, but I also connect nearly every day to the PC's at my university.
    Ok - so I'm sitting right now at the uni with my ipod connected (to charge), and the uni machines immediately pick it up and add it as a device. It is currently showing in Windows Explorer, and I can view it, edit it, and access all of the information that is currently on it - no problem.
    The problem happened yesterday at home. For the first time ever, when connected my PC no longer recognises it properly. When you connect it initially, you get the "new device" sound from Windows, and the "new hardware" icon in the system tray pops fine. If I have Windows explorer open, it shows the Ipod fine, and allocates it a drive letter.
    HOWEVER, after about 5 or 6 seconds, the ipod entry in Windows Explorer disappears again, never to be seen again. From this point on, it is inaccessible through Windows explorer.
    FURTHERMORE, iTunes still picks it up fine! Even after it has disappeared from Windows explorer, it is still sitting there in the left hand menu of iTunes just fine. I can still access and update ok within iTunes - from the iTunes point of view, there doesn't seem to be any problem at all.
    Therefore I am extremely confused.
    It has been a couple of weeks since I last used the ipod with my home machine. The ONLY thing that has changed, is the SP2 updates which the machine automatically downloaded and updated. Therefore, I am concerned that this is the direct cause. I use Norton Internet Security 2006 on my machine, and it kicks up all sorts of fuss, if you don't have Windows updater set to automatic. I am aware of several Windows updates that it is has downloaded automatically (which you can see installing during the shut-down sequence).
    * I can eliminate my apple data cable, as it is working fine on the PC that I am using right now.
    * I can eliminate the ipod itself, as again, this is working fine with the PC that I am using right now.
    * I can eliminate my USB ports on my home machine, as they too work fine with several other flash sticks connected to them.
    * I have NOT downloaded or installed the recent 23.6.06 ipod updater which seems to be causing everyone lots of bother!
    If I disconnect and reconnect the ipod, Windows Explorer, then briefly picks it up again, but then loses it again after about 6 seconds!
    Also - the ipod is picked up fine (when connected) in Device Manager. It is listed under the "disk drives" icon, and when probed, Device Manager claims that it is working properly.
    Also - the ipod is listed under the "safely remove hardware" icon in the sys tray. It simply isn't given a drive letter, which is the only apparent problem.
    I remain CONFUSED, as it to what is partially blocking my ipod - it is clearly linked to Windows Explorer, and my guess is that some sort of security feature is causing it not to have a drive letter. I have Norton in charge of my security settings, and have mostly disengaged Windows in-house security settings.
    I would be VERY, VERY grateful if someone can please help me, or let me know if they have suffered the same problem, and identified the resolution.
    If I can't find an answer - I will try the 5 R's - which I didn't have time to do yesterday, and update if this is successful.
    Thanks
    Compaq PIV 3GHZ   Windows XP Pro   512MB / 120GB / USB 2.0 / Firewire

    Can I ask you another question? (separate)
    When using itunes - I had thought that you could literally dump ALL of your music into the itunes library and purely select what you want to appear on you ipod, by selecting the check-boxes, next to each track listed in the main library!?
    I have my ipod full all of the time - and I would like to think that I can add more to my itunes library than actually appears on the ipod itself. However, I find that when I add a new folder to the itunes library - if I update my track listings by unchecking the older stuff in the itunes library that I want to remove from the ipod, and leaving the new stuff checked - when you click on update ipod - it does not delete the old "unchecked in itunes" stuff as I want it, and merely tries to add the new tracks. Because the ipod is already full - it cannot continue, and tried to offer a compromise of adding as much as it can etc etc.
    The only way I have found to remedy this so far, is to physically "clear" all of the unwanted songs from the itunes library (but keeping the files where they are located on the HD), and then adding the new tracks/folders - and then itunes DOES delete the removed songs from the library, and adds the new ones.....
    Is there a better way of doing this?
    hi Richard!
    Why also then, will she not show up on my home PC
    (with the itunes installed), but show up perfectly
    fine in Windows Explorer on the uni PC's?
    yeah, i'm wondering about that too. the settings
    in that preference tab are (mostly) stored on the
    ipod itself, which is how if you switch an ipod to
    "manually manage" on one PC, it connects manually to
    a different PC also. so, initially, we're going to be
    trying to work out which PCs (home or Uni) you're
    getting the anomalous behavior on.
    perhaps take a note of what preferences you've got
    engaged when you're plugged into one of the uni PCs,
    too? that might help with the untangling process.
    keep us posted.
    love, b

Maybe you are looking for