Partial Good Receeipt for Evaluation of On Time Delivery Sub Criteria

Hello
Im customizing Vendor Evaluation in SAP ECC 6 I defined a Purchasing Value Key, as a follow:
Minimun Req Qty: 99,9%,
StdValue Days: 1 Day ,
because of a lot partial delivary for special material we prefer system score delivary time according to last GR posting date .
when run ME63 ,In the first delivary posting the system do not calculating score that is correct but in the next delivary system still do not considering score ,why? we expext in the last delivary the system finally calculating rate?
I think the system can not add all partial delivary for calculating score?
It would be my pleasure if you help me,
Regards,
Azam

I don't think that you can have an individual scoring method for one vendor, so a change of customizing will affect all vendors.
A delivery date of an entire month would mean the last date of the month is the date in date field.
So you would need to setup your percentages so that 30 days early delivery are still get a 100 %

Similar Messages

Partial Goods Receipt for Inbound Delivery

Hello Frends,
We have a requirement to generate partial goods receipt against Inbound delivery created in Intercompany scenarios, however when we analzed there two alternative ways possible -
1. Goods Receipt in Inbound Delivery - Transaction VL32N : In this transaction,ssytem allows goods receipt for complete quantity but not for partial quantity
2. Goods Receipt reference to Inbound Delivery - Transaction MIGO : In thsi transaction, there is a provision to generate partial goods receipt however system not updating the status in inbound delivery document.
In this regard, requesting your support on what is possibility to fulfill our requirement, is there any standard SAP approach for this.
Appreciate your support. Thanks
Best Regards,
Goutham

Hi,
Thanks for your quick reply..
I have a outbound delivery with 100 EA, now system automaticallly generates a Inbound delivery for 100EA using output message. Now we need to generate partial goods receipt for the inbound delivery, mean first 20, then 40 and the remaing.
What are the best practices available since when I check from the Inbound delivery,we cannot make partial goods receipt.
Best Regards,
Goutham

Partial goods receipt for PO with multiple line items

Hello All,
While doing MIGO, for a PO with multiple line items, if one line item is having error, will we be able to go ahead with goods receipt? Or entire material document is blocked for doing MIGO?
We will be doing a development - in case if there is problem in goods receipt (checking of any parameter, and if it is missing - we will be posting error message)...is it possible to ahead with next line item and still post the material document?
If partial goods receipt if possible for PO with multiple line items, how do we do it?
Regards,
RJS

Hi
While doing MIGO, for a PO with multiple line items, if one line item is having error, will we be able to go ahead with goods receipt? Or entire material document is blocked for doing MIGO?
No. You cannot post the MIGO, if even one of the PO line item is having problem or giving error.
We will be doing a development - in case if there is problem in goods receipt (checking of any parameter, and if it is missing - we will be posting error message)...is it possible to ahead with next line item and still post the material document?
If you skip a line irem and do GR with next line item, how will you match quantity & value with the vendor Invoice at LIV ?
If partial goods receipt if possible for PO with multiple line items, how do we do it?
Partial goods receipt is possible for PO line items. That means, if PO has 100 qty for line item 1 then you can do GR for 50 now and 50 later depending on the vendors delivery.
Hope this is what you mean by "Partial Goods Receipt".
Edited by: Arun R on May 10, 2010 2:03 PM

Vendor evaluation- where to put (see) sub criteria on which screen

Please can any one update on it.
Dear Friends.
I have configured vendor evaluation in following way .
1)     Price (main criteria) u2013 a) price level [60] b) price behavior [30] c)market behavior[10]
Que u2013 where we have to put above sub criteria a, b, c mans at which transaction level in sense that it will give me Ven. evaluation
2)     Quality (main criteria)- a) GR inspection [40] b)Rejection/complaints [40] c)Audit [20]
Que u2013 where we have to put above sub criteria a, b, c mans at which transaction level in sense that it will give me Ven. evaluation
3)     Delivery- a)Ontime[30] b)Qty reliability[40] c) shiping instruction[10] d) adhere to conf.date[20]
               Que u2013 where we have to put above sub criteria a, b, c mans at which transaction level in sense that it will give me Ven. evaluation
Regards,
MAhesh
Edited by: mahesh A on Jul 11, 2011 8:53 PM

Hi Mahesh,
the path is img.....mm......purchasing......vendor evaluation......maintain criterion for purchasing organizations
also please find some useful links for vendor evaluation
http://wiki.sdn.sap.com/wiki/display/ERPSCM/VendorEvaluationin+MM-PUR
Looking for Vendor evaluation steps
Vendor Evaluation Process
regards,
Adwait Bachuwar

***How to Partial goods reversal for a goods movement / PGI done to vendor

Hi Experts,
Here is the scenario
Purchase order is created for 7 ea and inventory for the 7 ea gets moved to the vendor. However the Vendor actually only receives 6ea . Vendor returns 6ea to company. A Goods Receipt is performed for the 6 ea . We are invoiced for 6ea
This leaves 1 ea showing at the vendor.
The question is How to reverse that partial quantity to our own company stock. If we use VL09 it reverses the compete quantity.
Also if I try to do reversal of partial stock with MB1B with the special movement type 542E it gives me error saying "Special Stock E not supported (check your entry)
Thanks in advance.
Edited by: Albert Ackerman on Oct 2, 2009 9:23 PM

Enter movement type 542 special stock E- DO NOT HIT ENTER
Go to Edit> Default Values
You wil be taken to a screen that will allow you to enter sales order data along with the std 542 fields.

Good app for tracking employee info/time

Hello,
I'm looking for a simple iphone app (besides a note taker) that I can jot down what time we left the store at night so I can compare to their timesheets when they submit at the end of the week. Also, mabye notes on an employee (if late, call off sick, etc..) I use Evernote right now to simply jot down a note when we leave each night and other notes on the employees but was just wondering if there was an app that would make my life easier?
We don't use a time clock at work so it's just a way to help keep tabs for validating time sheets at the end of the week. Thanks for any input.

This one seems to do everything you want, and has good reviews too: App Store - Timecard Pro

Lack of good functionality for iPod Nano alarm timer?

Hi, I'm the proud new owner of a Gen 2 - 2GB Nano, and I had figured that between the Sleep function, the Alarm function, and the Stopwatch function, it would be something I could use to listen to music while working out, and at the same time use it as a timer for the couple of exercises I do that I'd like to time (as opposed to counting).
I would think this would be a key use of Nanos by many people, but what I find is that all of the options are less than desirable.
Alarm: I could set the alarm to go off at the allotted time, but what I would want is the "beep" and for the "beep" to come through the headphones. I'm listening to music using the headphones, so I don't to hear the "beep" emitting from the Nano's "internal speaker". Selecting a Playlist to be the alarm sound does work to alert me to it being time to switch exercises, but "switch" is the key problem here because it switches to that new (or the beginning of the same) Playlist. In other words, the main function of the Nano for me is to listen to music, and perhaps that will be an entire album while I work out, but using the Playlist feature for the sound of the alarm means I will be interrupted in the midst of, say, track 4 of the Playlist I'm wanting to listen to for my workout.
Sleep Timer function: Only allows me to select in 15 minute intervals (I need 11 or 12 minutes for one particular exercise, though I could live with 10 minutes, but that’s not even there). Plus the abrupt shutoff of the music that's playing is horrible. The intent of the Sleep Timer function of course makes the 15 minute interval choices make sense, but a bit of a fade for the music shutoff would be an improvement (and less likely to wake someone up who was just drifting off). If the Sleep Timer could actually let me set the number of minutes, it would be my solution (since upon stopping the music that’s playing, that position in the Playlist is retained and one can start listening again where one left off).
Stopwatch: Stopwatch isn't really useful for what I'm trying to do. It would be, of course, if it had a "timer" setting that let you program it for a number of minutes to count down, then upon reaching zero it would beep in the headphones along with the music being played, or just fade the music that’s playing, similar to what the Sleep Timer does, though it does it abruptly...
So two questions:
1. Do any more experienced iPod owners know of a way I can do what I’m trying to do? (Play music, be alerted when a specific number of minutes are up, and not have the position in the Playlist of the music I’m listening to be lost.)
2. What is the way to make suggestions to Apple for changes to the iPod software?
Any help/comments appreciated!
Thanks,
Rich Apple (and yes, Apple is my name, and no, Apple the company has never seen fit to give me a computer and take advantage of the wonderful “stealth advertising” I would naturally be… Oh, your name is Apple? Do you own the computer company? Well, no, but they actually did give me a computer; that’s how groovy they are.)
Nano 2GB Generation 2

Thank you, Jeff, for the couple of answers. I did put in a couple enhancement requests via the http://www.apple.com/feedback/ipod.html link, and I imagine such requests carry more weight if others also request them.
I requested that Apple make it so one can be alerted to an alarm via the headphones without losing the position in the playlist that one is listening to, or that the Sleep Timer be changed to accept a number of minutes rather than just choosing between the 15 minute increments. (Either being a means to time something (excersize, hard-boiling an egg, sex, or anything) and be alerted when the time is up without having to lose one's place in the Playlist.)
I also requested that the Sleep Timer function use a fade-out rather than the abrupt shut-off of the music.
Again, thanks for the link, and thanks for confirming that you too can't find a way to do the timed periods in the way that I would think many others would want.
Rich Apple

How can partially goods issue in delivery document?

hi,
I created delivery document with 20 delivery quantity at first. after that I want to create partially goods issue. for example i want to have 10 quantity in pick quantity and at first 10 quantity goods issue and save and another time goods issue the remained quantity. but I can not configure the system to do this.
thank you.

Lida,
As per standard SAP, you cant do partially picking. If you want to do partial elivery of item, change the quantity of the delivery item in the delivery and pick the full qty. for example :
Sales Order 10 Qty,
Delivery 5 qty
Picking 5Qty
This will be partial delivery,
Thanks,
Raja

Need rounding off value for partial Goods receipt

Hi,
My requirement is that the PO value,PO tax value ,GR value and Invoice value(IR) should get rounded off.
When I am using the PO value which is rounded off in PO, but at the time of posting partial goods receipt the value for the GR/IR clearing or the stock value is not getting rounded off for these G/ls.
What should I do for this to get the rounded off values in GR.
Regards,
Goraksh

Hi Goraksh,
The problem is that the pricing (incl. the rule 17) is not normally called at the time of GR. As Jürgen wrote, the system just uses the "net value" field of the PO.
I have however a "wild" idea. If the price in the PO comes from the info record or from a contract (and not changed manually there), then you can set the "pricing date category" = 5 there, meaning "GR date". This causes the pricing to be called again at the time of GR and your formula 17 will fire.
The side effect of course is that the price that you had in the PO, printed and sent to the vendor will not be binding: if you change the PIR price before the GR, the GR will be posted to the new PIR price, despite the fact that the PO printout showed something else. So the question is if the price printed on the PO is indeed binding in your business case - in many business cases it is the current vendor price that matters for the billing by the vendor, not the one that you prined on the PO. For such business cases you should have had pricing date category 5 anyway...
BR
Raf

Multiple Account Assignment at the time of Good Receipt for one line item

Sap Members.
We have some contracts with cost center distributions that the exact amount is not known. These Blanket Orders require a receiving confirmation.then only we can conclude the cost center, If we create one line item with total amount of contract to one cost center, is there a way can we distribute this cost to the different cost centers at the moment receiving the goods
Any help will be highly appreciated.
Thanks
Nick

Please Check SAP Notes - Oss Notes
With multiple acct. assignment, enter GR non-val. or cancel GR
Message no. 06417
Diagnosis
In the case of PO items assigned to more than one account, instead of valuation being carried out at the time of goods receipt, the relevant materials are not valuated until the invoice data is entered into the system.
Procedure
     Set the indicator for non-valuated goods receipts
or
     Cancel the GR indicator.
OSS-Notes.                              -
Version: 5        -
Validity: valid since 12.04.2007
Note 204252 - Valuated goods receipt for multiple account assignment
Summary
Symptom
You cannot use the valuated goods receipt function in combination with multiple account assignment.
Other terms
EKPO-WEUNB, screen 0113, ME21, purchase order, 06417, 06 417
Reason and Prerequisites
We have not implemented this function since users who post goods receipts would have to determine the distribution to individual account assignment items during partial deliveries. Generally, users cannot or should not determine this.
An automatic distribution also causes problems and is also not implemented due to technical reasons

Automatic Batch determination at time of Goods receipt for production order

Hi SAP experts,
Greetings to you all. I wish to ask a query that how batch is determined automatically at the time of goods receipt for production order .
I have done the following settings:
1.Specified batch level at material level
2.External batch number assignment
3.Defined production order condition table '501' (plant/material)
4.Defined production order access sequence (order type-plant -material)
5.Defined Production Order Strategy type.
6.Defined Batch search procedure in Production Order.
7.Assigned Batch search procedure to Production order type for a particular plant , batch check not activated.
Please let me know of any more settings to be checked for the same.
For example, a production order is being confirmed for a quatity of 5 nos . at a time . However, the GI movement (261 movement type) for the production order components is taking place for 1 EA qty. from 5 different batches.
So now, how the system will define the GR (movement type 101) for the production order header material for the qty. 5 nos. EA ?
It is desired that the system should do GR for the qty. 1 EA of the header material for the 5 different batches (batches which were automatically deteremined for the Goods issue of the components).
Thanks in advance. good day.
Best regards,
RB

HI Rahul,
As explained earlier, for e.g., if the GR is taking place for the production order for qty. 5 nos. , and in that , if the component qty. is 1 EA for 1EA of header material ; then , the GR for the header material should take place for the same different batches from which the order components were issued for the order and not for the other batches in stock for the header material as well as components.
I am not sure if i understand your requirement 100%.
But let me explain you standard behaviour.
When Confirmation for production order happens and GR is posted during confirmation , All the GR happens agaist same batch number which i sassigned in production order assignment screen.
So for all the order qty single batch would be fixed. Say batch A1 is created for Header material for 100 qty.
Now during components issue to production order, If 100 qty needs to be issued for compoenent B it is possible to use multiple batches of componenets ( using splilt batch functionality /or manual batch number entry agaist componenet in goods movement screen) but header batch remains the same.
Check and Revert,
Santosh Sarda

Is a time capsule a good idea for a college student living in a dorm?

Is a time capsule a good idea for a college student living in a dorm?

Before you buy......you need to check with the school to see if they allow wireless routers in the dorms, or on campus at all.
Most schools prohibt the use of wireless routers due to interference issues.
Even if the school might allow this, there is no way to know in advance how well this might work....and frankly this type of setup is difficult, even if you have a friend who "knows computers".
If it were me, I would purchase a hard drive for backups....just like you do now.... and send an email once or twice a week to the student to remind them to "backup".

Can a Time Capsule be partitioned? Is having a HD mirror the contents of the TC a good safeguard for potential HD/TC failure?

I have a few questions about the Time Capsule
I am going to use a 2TB time capsule to do wireless backups of my Macbook, but also manually store files (photos, movies, music etc). Can I partition the TC? I want to have maximum storage for photos, movies etc and only 500GB for the time machine backups. If partitioning is not possible, will old backups automatically delete themselves from the TC as the storage fills up with the other files I load up on there? Or will I have to delete the old backups manually myself?
Also, as a safe guard, I plan to get a 2TB portable hard rive (Mac & time machine supported) to completely mirror the contents of the time capsule (i.e.. have 2 back ups of separate disks). I understand I will have to plug this into the Macbook each time (to do the time machine backups and add new files), but my question is whether or not this setup is a good way to keep multiple backups, just in case one of the Hard Drives (most likely the TC) dies. I'm quite new to the back up game, but I want to minimise risk (of course) and keep a consistency between the portable hard drive and the TC: I want them to be identical so I don't have files/backups on one HD but not on the other.
I hope to get some good responses !

You cannot partition a TC. Not without voiding warranty, opening it and doing it externally.
Even when you do external partition the TC will throw up disk errors so don't go that way.
See pondini on ways to control the size of the sparsebundle.
Q3 here http://pondini.org/TM/Time_Capsule.html
Also, as a safe guard, I plan to get a 2TB portable hard rive (Mac & time machine supported) to completely mirror the contents of the time capsule (i.e.. have 2 back ups of separate disks). I understand I will have to plug this into the Macbook each time (to do the time machine backups and add new files), but my question is whether or not this setup is a good way to keep multiple backups,
Time Machine is far more limited than you think..
You cannot backup the TC.. it is a network drive. It is used as a target for the backup but it cannot be included in the backup. Therefore it is not possible to do what you are planning.. at least without buying another backup software like CCC which does have the ability to backup network drives.
In many ways the problem is that TC is not designed as a NAS.. which is what you want to use it as.
It is better IMHO to buy a NAS, if that is what you want.. although most NAS that are TM compatible don't handle TM very well, CCC can. Every NAS made can back itself up.. so you simply have a USB drive plugged in and the NAS keep itself backed up. Buy a decent NAS with mirrored drives and that also helps.. not for backup but protection against a faulty drive.

Good book for first-time computer user?

I need to teach someone who has never used a computer how to use one. I have used computers all my life, so I don't know where to start. I thought I'd get a book. If it were Windows, I'm sure I could find a hundred books for a newbie. On a Mac, though, I'm not sure what exists out there, because most new Mac users have used Windows, whereas most new Windows users have never used a computer.
Does anyone know of a good book that teaches a first-time computer user how to use a Mac?

The David Pogue books are excellent but first, have you seen Mac 101?
-mj
[email protected]

Quick Time Pro for evaluation

I need to convert video files with the .MOV extension to a .AVI extension in order that videos can be read by a Sony DPF-D1020 Digital Picture Frame. I have spent 2 days trying different types of evaluation copies from different companies but nothing works. The conversion process completes successfully, but the Digital picture frame cannot read the converted files.
Can somebody help me out? Is there a place where I can get a copy of Quick Time Pro for evaluation purposes - I want to see if it works before paying $35.
Thank you

I need to convert video files with the .MOV extension to a .AVI extension in order that videos can be read by a Sony DPF-D1020 Digital Picture Frame.
You need to determine which codecs the DPF-D1020 can read and then convert using one of those codecs. AVI is a container, not a codec.
Is there a place where I can get a copy of Quick Time Pro for evaluation purposes - I want to see if it works before paying $35.
If you're just trying to convert files, use the free MPEG Streamclip instead.
(54794)

Partial Good Receeipt for Evaluation of On Time Delivery Sub Criteria

Similar Messages

Maybe you are looking for