Partial image shows up in scanned image

I have a officejet 6600 all in one printer. Lately whenever I try to scan documents the actual image is cut off. Only a very small part of the document shows up as part of the final image. The content that is visible on the scanned image is from bottom right corner of the scanning space. Please advise what steps I need to take to fix this issue. Thanks
This question was solved.
View Solution.

Hello Fasih,
Welcome to the HP Support Forums!
I see that you are trying to scan documents using your HP Officejet 6600, how ever you only getting a very small portion of the scan. What happens when you try to make a copy, does the whole page produce on the copy?
If using the HP software, make sure the Scan size is set to Entire scan Area.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Scanner only scans partial image, please help!

scanner not working right (HP all in one printer), when I scan from the HP device I get partial images saved into "scanner output", when I scan from the computer I get a full image with a decreased viewing field that I need to resize. Now, scanning from the computer it opens a window to save in "scanner output" which I do, the device scans, I see the image, but when I clear that box there are zero saved projects in "scanner output". I am so frustrated. I even lock the 8.5"x11" in the resize field but images/viewing fields are still partial. HELP! Any advice would be greatly appreciated.

Hi
Which HP AIO scanner do you have? I have the C4280. When using the Device Manager I choose>scan picture>scan to:PDF File (which I use most often)>accept>save as XX.>save to desktop.
Try saving to Desktop so you're not searching all the time (been there, done that).
Let me know how it goes.
M.

Partial Image Downloading

Have any one faced this problem, that the pages sometimes only load up partially images or better with partially being displayed. After refresh the image shows up
porperly. It happened in all the browsers but it is the case 1/100

Looking into this, will let you know what I find out... It may be a problem with a specific DB version.
Can you tell me what version you are using?
Thanks,
Larry

Firefox Help Search Found 0 results for how do I remove an image from my apps toolbar area. It's not an app. it's a partial image from my desktop icons. It's like it partially opened and froze.

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/919974]]</blockquote>
I have a partial image from one of my desktop icons stuck in the app bar of my firefox yahoo homepage and can't seem to remove it.

Try this -
<img src="assets/jpgs/Prodigy Logo Large 2014.jpg" width="180" height="180" alt="" style="display:block;">
What you are seeing as whitespace is the space reserved for glyph descenders on any element that is rendered within a text box (i.e., an inline element). By making the image "display:block" you eliminate that space because a block element doesn't have descenders. If that works to your satisfaction then you can give the logo an id, and create a CSS selector containing that block style.

Partial image in Windows XP

What would cause only a partial image to be viewed in Windows XP? I can see my desktop on the outer edges of the pdf. If I know from previous experience where the functions are at the top of the image, they still work, but I cannot see them. Any ideas?

Sorry, cor-el, ... nice try, but I have already declared my default browser as my favorite ... Firefox. I first used IE to set the default to IE, and then ran Firefox to reset the default to Firefox. I also used the File Types interface to insure that Firefox was the program to be used and that the icons were set to Firefox, but the IE icons re-assert themselves after a re-boot.
(Microsoft must have infinite wisdom over what it "knows" we need ... yeah, right!)

Time machine - Error Deleting Partial Image

Back up issues.
IMAC, OSX 10.7.5 using time machine and time capsule. Been using this setup for 2+ years with no issues.
When attempting backup time machine makes an attempt and then goes into a status of "Waiting to Back Up"
When checking the console get the following:
22/03/2014 08:43:18.294 com.apple.backupd: Starting standard backup
22/03/2014 08:43:18.679 com.apple.backupd: Network destination already mounted at: /Volumes/Data
22/03/2014 08:43:18.684 com.apple.backupd: Found 1 partially deleted backup image.
22/03/2014 08:43:18.745 com.apple.backupd: Failed to remove file://localhost/Volumes/Data/Martin%E2%80%99s%20iMac.purgeable/, error: Error Domain=NSCocoaErrorDomain Code=513 "“Martin’s iMac.purgeable” couldn’t be removed because you don’t have permission to access it." UserInfo=0x7fac5c10b200 {NSFilePath=/Volumes/Data/Martin’s iMac.purgeable, NSUserStringVariant=(
Remove
), NSUnderlyingError=0x7fac5c10b180 "The operation couldn’t be completed. Directory not empty"}
22/03/2014 08:43:18.745 com.apple.backupd: Error deleting partial image /Volumes/Data/Martin’s iMac.purgeable: (null)
22/03/2014 08:43:21.275 com.apple.backupd: Recovery backup requested by user.
22/03/2014 08:43:21.519 ReportCrash: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
22/03/2014 08:43:22.065 com.apple.launchd: (com.apple.backupd[965]) Job appears to have crashed: Segmentation fault: 11
22/03/2014 08:43:22.684 ReportCrash: Saved crash report for backupd[965] version ??? (???) to /Library/Logs/DiagnosticReports/backupd_2014-03-22-084322_localhost.crash
22/03/2014 08:43:41.140 [0x0-0x39039].com.apple.airport.airportutility: 2014-03-22 08:43:41.140053 AM [BonjourBrowser] Reconfirming PTR for Manor View Time Capsule._airport._tcp.local. on en1
This rogue file seems to be the issue Martin’s iMac.purgeable
Can anyone advise what I should do?
Thanks.

Back up issues.
IMAC, OSX 10.7.5 using time machine and time capsule. Been using this setup for 2+ years with no issues.
When attempting backup time machine makes an attempt and then goes into a status of "Waiting to Back Up"
When checking the console get the following:
22/03/2014 08:43:18.294 com.apple.backupd: Starting standard backup
22/03/2014 08:43:18.679 com.apple.backupd: Network destination already mounted at: /Volumes/Data
22/03/2014 08:43:18.684 com.apple.backupd: Found 1 partially deleted backup image.
22/03/2014 08:43:18.745 com.apple.backupd: Failed to remove file://localhost/Volumes/Data/Martin%E2%80%99s%20iMac.purgeable/, error: Error Domain=NSCocoaErrorDomain Code=513 "“Martin’s iMac.purgeable” couldn’t be removed because you don’t have permission to access it." UserInfo=0x7fac5c10b200 {NSFilePath=/Volumes/Data/Martin’s iMac.purgeable, NSUserStringVariant=(
Remove
), NSUnderlyingError=0x7fac5c10b180 "The operation couldn’t be completed. Directory not empty"}
22/03/2014 08:43:18.745 com.apple.backupd: Error deleting partial image /Volumes/Data/Martin’s iMac.purgeable: (null)
22/03/2014 08:43:21.275 com.apple.backupd: Recovery backup requested by user.
22/03/2014 08:43:21.519 ReportCrash: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
22/03/2014 08:43:22.065 com.apple.launchd: (com.apple.backupd[965]) Job appears to have crashed: Segmentation fault: 11
22/03/2014 08:43:22.684 ReportCrash: Saved crash report for backupd[965] version ??? (???) to /Library/Logs/DiagnosticReports/backupd_2014-03-22-084322_localhost.crash
22/03/2014 08:43:41.140 [0x0-0x39039].com.apple.airport.airportutility: 2014-03-22 08:43:41.140053 AM [BonjourBrowser] Reconfirming PTR for Manor View Time Capsule._airport._tcp.local. on en1
This rogue file seems to be the issue Martin’s iMac.purgeable
Can anyone advise what I should do?
Thanks.

Scan to PDF Displays Partial Image AAXPro

Displayed image will be only part of original. Ran scanner diagnostic. Negative. A real pain.Latest update installed.

Found solution. Problem was that scanner input should be set to WIA and not TWAIN.

Partial image imported!!

Just started using Aperture and on importing images and videos from iphone4 it failed to import two movies and actually imported only strips of certain jpegs ie a strip of the image mainly on the right or the bottom !!
Anyone seen this? Very disappointing performance from software that is supposed to be better than iPhoto.

hello, charles
quote: "I have a Nikon D80 and shot in JPEG format. When I went to import some pictures had a grey bar on the side usually about 20 % of image but not consistent. When I looked at image in preview the entire image displayed."
This could be several things. Do the photos appear partially grayed out prior to importing or only after?
You might try rebuilding the Aperture Library by holding down the Command Option keys and follow the directions on the screen.
victor

When opening files in Photoshop CC, it only displays partial image. How do I get it to display the entire image on open?

I understand that people want to check the quality of the image when they open it, but I hate that I'm looking at the top left of every image when I open it. It's not maximizing the size of the image based on my screen size. I hate having to hit apple-0 every time I open a file. Where's the preference to change this??!

What you see is not normal on a PC I do not know abouts Mac's.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Ipad Air to Epson projector partial image projected

When I connect my ipad air to an Epson XGA projector via the Lightning to vga adapter MD825ZM/A, the left hand 10% approx of the picture does not get projected - I have to drag the image to the right to see it. Does anyone know a fix please?

Hi Peter&Laurie,
If you are having issues running an external display from your MacBook Pro, you may find the following articles useful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/ht3131
Regards,
- Brenden

Help with partial image loss from Viewer to Canvas

Hi--I'm brand new to FCP and would really appreciate any help with my problem. I'm creating 2 second video clips composed of four still images (15 frames...or 500ms each) laid back to back, then rendered. Very simple, I know. The individual images are tiff files that look great in the FCP Viewer. But in the Canvas, part of the image is missing. Specifically, in the center of each image there should be a + sign, about 1cm square. This + should remain constant thoughout the short movie, while the items around it vary (from image to image). (This is a psychology experiment, and the center + is a fixation cross.) The problem is that in the Viewer the + sign is intact, but in the Canvas (and the resulting rendered video), only the vertical bar of the + is present! This is true for every individual tiff, and for the resulting movie. The items around the fixation cross are fine. My question is WHY on earth does the central horizontal bar get "lost" between the Viewer and the Canvas? I've read the manuals, but obviously I've got something set wrong. Also, there is a considerable overall reduction in quality between the viewer and canvas, even though I'm trying my best to maximize video quality. Everything looks a bit blurry. Truly, all ideas are welcome. Sorry if it's obvious. Thanks.
G5 Mac OS X (10.4.3)

steve, i'm viewing on my 23" cinema screen. i read up on quality and know that this is a no-no; that i should only judge quality when viewing on an ntsc monitor or good tv. the problem is that i'll ultimately be displaying these videos on my Dell LCD, so i've got to maximize what i've got. thanks to the discussion boards i have a short list of things to try now. thanks!
-heather

Z3100 Printing Partial Image

Suddenly this particular image is only printing part of the image. Other images print and test prints print fully. It is just this one. I tried to flatten a copy and print that...same result. Any suggestions? Thanks

Hi,
Please follow the steps in the link:
http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=110&prodS...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Partial Image Rendering

I have an applet that I'm working on which is basically a zoomable map of my area, I have this in a gif currently, and I was wondering if there is anyway to only render the part of the image that is visible in the applet, as when the image gets more then 2000 by 2000 pixels, it takes quite long to render, when only 600 by 400 of them are on the viewable portion of the applet, so you can't see anything for 5-10 seconds while the thing is rendering the offscreen portions.... Is there any way to limit this so the graphics object only renders the portion of the scaled instance that I want it to? if so, how would I go about this?

Tile your image.
Break it up into small images. You then only have to load an render the
tiles that are currently part of the display.
There are a number of ways of doing this.
A) Use JAI, which supports tiled images, to load tiled TIFF's and handle the processing for you.
B) Use a BufferedImage (they support tiles) to read a tiled source image
(Tiff is a good bet) and render only what is needed.
C)Use photoshop (or whatever) to manually split your gif into 64x64 (128x128) tiles. give them nice names such as tile_0_0.gif. tile_1_4.gif
etc. so you know which tile goes where. then you use your current
zoom factor and Graphic object to figure out which tiles need to be drawn.
You load those tiles into a cache (at its simplest this can be a
LinkedList of N tiles). You draw them to screen.
The first option is probably overkill for your applet and would require
users to download JAI.
The second option is quite elegent but Im not sure how well Tiling is
supported by BufferedImage (and its readers as I presume you will be
reading the images over a network connection). Its readers may require
that the whole image be read before arbitray tiles can be manipulated.
Java.IIO may provide some solutions for this but is only available
in recent java versions which your users may not have.
The thrid option offers the most flexibility but requires the most
coding to get to work. It ensures that only tiles that are needed are
sent over the network or loaded. Your applet does not require any
particular JDK version (as long as its above 1.2 but you could probably
implement it on 1.1)
matfud

Partial image selection insert

I'm a novice but have been exploring Dreamweaver for several
weeks now. No formal training yet. However I have extensive
Photoshop knowledge. I'm trying to insert a simple shaped image (my
own button design) into a Dreamweaver HTML document. I designed the
button in Photoshop and then used the selection tool (magic wand)
to select all the white space around the button. I pressed the
delete button on the key board to clear all the white background
around my image leaving only the button I designed. I then saved
the file as a jpg. htm. psd. and a couple of other ways too. But
when I insert the image ( in all the different file extensions)
into my Dreamweaver document, all the white background that I
thought I deleted comes along too and the line quality of the image
is not good either. I want only the button itself with a nice sharp
edge and nothing around it. Can someone Please tell me what I'm
doing wrong. Is it in Photoshop or Dreamweaver that my mistake
resides? Thanks in advance to any and everyone's help. Steve

> Sounds great
> but when I place the cursor in the window where I would
want it, I get the
> same
> blinking line in the upper left corner everytime.
That's because you haven't yet grasped that HTML is not like
Word, or
Publisher. You cannot just put your cursor somewhere and
paste content on
the page without there being an HTML infrastructure that
creates a
'somewhere' for stuff to be placed. If you start with an
empty HTML page,
the only place you can put ANYTHING is in the upper,
left-hand corner! The
sentence you quote -
> and place your cursor where you want the image and paste
it in.
assumes that you already have that HTML page structure in
place.
> So where do I get lessons in the Detroit area
Detroit has internet, right? Go here -
http://www.w3schools.com.
Learn
HTML and CSS, and DW will be a piece of cake.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"golfsferr" <[email protected]> wrote in
message
news:[email protected]...
> Thanks everyone. I have tried the PNG24 approach with no
luck, the image
> still
> has a border of white and transparency is checked. Like
I said I'm a
> novice
> and I know that there is so much more I need to learn,
like the basics for
> one.
> I have created some pages but they are very structured,
a lot of tables
> and
> they appear somewhat linear and boxy. I'm trying to get
more creative and
> that's where I'm running into some trouble. It seems
that I can't place an
> image with out putting it in a table. Hell, I read in
one of the
> tutorials, to
> place an image from Photoshop all you had to do is copy
then go to
> Dreamweaver
> and place your cursor where you want the image and paste
it in. Sounds
> great
> but when I place the cursor in the window where I would
want it, I get the
> same
> blinking line in the upper left corner everytime. And
when I try to drag
> the
> image somewhere from there it won't budge........ So
where do I get
> lessons in
> the Detroit area. I have called New Horizons twice and
they don't return
> phone
> calls, I guess they have more business than they can
handle. Any
> suggestions
> please. Steve
>

Thumbnail problem on exports (partial image)

After I have exported my edited images I have noticed some of the thumbnails are not completed images, i.e. the starting from the top you can see part of the image then it goes to gray. This does not always happen. The thumbnails are in Windows Explorer, full size images are fine
Info on my system:
Windows Seven (New install with all Updates)
Intel i3
4 Gigs Ram
Lightroom 3.3
Camera Raw 6.3
Thanks for reading
Mark

Lightroom 3 has been doing that forever. It sucks. It did it in windows vista 64bit and now its doing it in windows 7 64 bit. Only get half of an image. The new Lightroom 4 beta is just starting to do it know too. When i take them to a lab to be printed they cant see the image at all so they cant do any adjustments to them cause they dont see what they look like.
Heres my system specs,
ASUS
P8P67 PRO R3.1 LGA 1155 P67 ATX Intel Motherboard
Intel
Core i7 2600 LGA 1155 Boxed Processor
Corsair
Vengeance Series 16GB DDR3-1600 (PC3-12800) CL9 Dual Channel Desktop Memory Kit (Four 4GB Memory Modules)
EVGA GeForce GTX 570 HD SuperClocked Graphics adapter - 1.25 GB - GDDR5 SDRAM
Creative Labs Sound Blaster X-Fi Xtreme Audio
Three, Western Digital Caviar Black 2TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive WD2002FAEX - OEM
OCZ Technology
ZS Series 750 Watt ATX Power Supply
Cooler Master
HAF X Full Tower ATX Gaming Computer
2 28 inch Hannspree HD Monitors
Windows 7 Home Prem 64bit

Partial image shows up in scanned image

Similar Messages

Maybe you are looking for