Partial page view on web page

Using an iMac Blueberry, G3, OS 9.1. On some web pages I cannot see the full page. The left side of the page is truncated and the scroll bar is bottomed out on the left side. I was told that some web producers are catering to the flat screen display that is larger than the CRT.
Is there software or some other means to shrink the web page to obtain a 100% view rather than 80% of the picture with the other 20% out side the boundry of the CRT?
M. Ogman
powerpc G3 Mac OS 9.1.x

Most web pages look okay at 1024x768 (XGA) anyhow. Designers know that the vast majority of users have XGA screens but nowadays SXGA, WXGA screens are commonplace but still I rarely see pages go much wider.
Go to Apple Menu > Control Panel > Monitors and check you are set to 1024x768 resolution.
mrtotes

Similar Messages

Not able to view my web pages in Safari

I am having problems viewing my web pages in the Safari browser and wondered if anyone can help solve the mystery?
The site was created in iWeb '08, and was loaded to .Mac. I did not want the site to be hosted on .Mac as I already have a domain, but the CNAME process that is described by .Mac is not supported by my hosting service, so I had to ask my hosting service (Freeola) to route the service to their servers and provide masking so the .Mac address would not show in the browser bar.
This works absolutely fine in Firefox and the page loads up without a problem.
However, when I enter the site address in the Safari browser, the name appears in the bar, and then the blue progress bar does 2 sweeps and then a blank page appears, but with the site mame at the top of the window. If I click the cursor on any point on the bank page, a grey horizontal line appears, and then disappears, but still no opening page!
I cannot work out whether this is an issue with the original coding in iWeb '08 and a compatability issue with Safari ( I am using v2.0.4 on all my 3 machines, and the problem is the same), or it's something to do with the way my hosting service is routing the site.
I have asked others to view the site on PC's using IE, and they do not seem to have a problem so far.
I am not a web designer, and know absolutely nothing about writing code and HTML, hence using the simplicity of iWeb, but this seems a strange thing to happen. If I enter the original .Mac site hosting address in Safari, the site shows up just fine!!
Has anybody else had this type of problem?? Any help would be gratefully received, as this thing is driving me crazy!!
Cheers.

Further to my earlier post, I have just read an entry noting that if you already own a domain name, and ask your hosting service to forward and mask your iWeb '08 created, web.mac.com site to your personal domain, chances are that due to the masking of the site on web.mac.com, Safari browsers interpret the masking as being the end of the site, and as such, just return a blank page?
This may explain the problem. However, call me old fashioned, and possibly a little naive, but surely this cannot be the problem?? It's OK in Firefox!

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the pag

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

Firefox Mobile Version currently Rolls itself up. you can no longer view the web page re installed mobile version still firefox rolls it self up even in full screen mode

Firefox Mobile Version currently Rolls itself up. you can no longer view the web page re installed mobile version still firefox rolls it self up even in full screen mode.
"Firefox mobile and Firefox installed on my PC both do exactly the same thing BTW."

That is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "

MSN Entertainment - .mp4 icons appear on my desktop every time I am using Firefox to view some web pages.

I have been using Firefox for many years now. Firefox 19.0 on a Mac OS X 10.6.8 Lately when I open and view some web pages an Icon with 'MSN Entertainment -.mp4' appears. Some sessions leave as many as 15 to 20 of these Icons. I can not open them with any thing.
Did I do something wrong or what. I can't seem to find out the answer.
They do not appear when we use Safari

PS - SORRY --- I meant (in the title): "... using Firefox as my web browser."

Global error page - compatible with partial page rendering

My global error page doesn't show in some isolated cases. Could this be because of partial page rendering? What changes might be needed to have it work in all cases?
I have created a global error page and set it in the web.xml with:
<error-page>
<exception-type>java.lang.Exception</exception-type>
<location>pages/htmlErrorPage.html</location>
</error-page>
This displays the htmlErrorPage when errors occur in nearly all my tested cases. However, when the test error is created inside one page redraw I find that the application dies without ever displaying my error page. On the console I get an error message that starts with:
Jun 13, 2008 12:54:11 PM oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer encodeAll
SEVERE: Error during partial-page rendering
javax.faces.el.EvaluationException: javax.faces.FacesException: javax.faces.FacesException: Can't instantiate class: 'com.softrek.adf.view.managed.JFreeChartPlotter'.. class com.softrek.adf.view.managed.JFreeChartPlotter : java.lang.NullPointerException
at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:190)
at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:143)
But my error page doesn' t show up. I've used the identical test error in most other parts of my application and it shows - so other than the partial page rendering going on, I can't see why this case would be different.
Is there any known bug (or feature) about the use of an error page during partial page rendering?
Any ideas will be welcome.

I'm unclear on how I would get the error to redirect.
I've changed my web.xml to go to a servlet of my creation, set up the mapping and all.
It works fine for exceptions generated in a backing bean normally.
When the exception occurs as part of partial page rendering the error servlet is not called and the user's session dies.
This is being done in JDeveloper 10.1.3.3
The new web.xml contains:
<error-page>
<exception-type>java.lang.Throwable</exception-type>
<location>/servlet/errorAction</location>
</error-page>
Which is working for errors generated under most circumstances but not when they are inside my partial page change.
How do I get errors to go to my error page when the error occurred during PPR?
PS. Using the PartialPageUtils.isPartialRequest() method generated a recursive error in my error servlet. This looks like the known limitation for Faces error handling.

How to use Partial Page Navigation

according to Web User Interface Developer's Guide for Oracle Application Development Framework section 7.4.1 How to Use Partial Page Navigation,
I set 'oracle.adf.view.rich.pprNavigation.OPTIONS' to 'on' in the web.xml.
and in the jspx, I use af:commandNavigationItem to navigation and set the tag 'partialSubmit' attribute to true.
But it does not work. does anybody know how to use this feature?

Hi,
the question is "what does not work". Partial Page Navigation is there to improve performance on page navigation. So if you navigate from page1 using a navigation case to end up at page 2 then the outcome of the command action's action property should match the navigation case name.
Frank

Partial page rendering not working in ie9

Hello guys, i have one fusion web application and got menu navigation using partial page rendering. The problem is, the ppr is working fine in firefox, chrome, ie8 and ie7 but not working in ie9. Is it i need to update jdeveloper patch or something?
My ppr setting
put below code in web.xml
<context-param>
<param-name>oracle.adf.view.rich.pprNavigation.OPTIONS</param-name>
<param-value>on</param-value>
</context-param>
for the menu just enable partial submit
partialSubmit="true"

Oh sorry, currently i am using jdeveloper version 11.1.1.5.0. Actually it is not shown any error, when i click the command link as example below, in ie9, nothing happens still displaying same page (my main page).
my sample menu
*<af:commandLink partialSubmit="true" action="page1" text="Page 1" id="cl2"/>*
*<af:commandLink partialSubmit="true" action="page2" text="Page 2" id="cl3"/>*
in task flow, action page1 will open page1.jspx and page2 will open page2.jspx

Partial Page Redering in ADF

Hi,
How to implement partial Page Redering in ADF

Have a look at the documentation - Web User Interface Developers Guide for Oracle Application Development Framework - chapter 7 - Rendering Partial Page Content
Everything is explained there and a lot better than I can do :-)
HTH
Paul

ADF UIX Partial page rendering

Hi
I am facing a mysterious problem with partial page rendering in ADF UIX.
My page contains a <header> H1 and inside this there are two headers(H2 and H3).
The partial page rendering is in the header H2 and is working fine.
When i remove the below header H3 the partial page rendering ceases to work and get stuck.
Pasting the full code below. Please suggest.
<?xml version="1.0" encoding="windows-1252"?>

<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40"
xmlns:myTemplate="http://xmlns.oracle.com/xhub"
xmlns:bc4j="http://xmlns.oracle.com/uix/bc4j"
xmlns:data="http://xmlns.oracle.com/cabo/marlin" expressionLanguage="el">


<bc4j:registryDef>

<bc4j:rootAppModuleDef name="XhubRegAM"
defFullName="oracle.apps.snw.tpadmin.server.XhubRegAM"
configName="XhubRegAMLocal" releaseMode="stateful">
<bc4j:viewObjectDef name="TpProfilesRegVO" rangeSize="1" autoCreate="false"/>
<bc4j:viewObjectDef name="UsersRegVO" rangeSize="1" autoCreate="false"/>

<bc4j:viewObjectDef name="IdentifierDomainsView" rangeSize="20"/>

<bc4j:viewObjectDef name="XhubTerritoriesTlView" rangeSize="300"/>
</bc4j:rootAppModuleDef>
</bc4j:registryDef>

<templates xmlns="http://xmlns.oracle.com/uix/ui">
<templateImport source="xhubtpadmin.uit"/>
</templates>
<content>

<dataScope xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui">
<provider>

<data name="textSource">
<bundle class="oracle.apps.snw.uicommon.TextProvider"/>
</data>

<data name="adminInfo">
<method class="oracle.apps.snw.tpadmin.webui.AdminInfo"
method="getAdminInfo"/>
</data>
</provider>
<contents>
<document>

<metaContainer>
<head title="${textSource.REGISTRATION}"/>
</metaContainer>
<contents>
<body>
<contents>

<myTemplate:xhubTpAdminPageLayout selectedTab="1">
<contents>

<messageBox automatic="true"/>

<form name="reg" method="POST">
<contents>


<formParameter name="event"/>

<bc4j:rootAppModuleScope name="XhubRegAM">
<contents>

<header text="${textSource.REGISTRATION}">
<contents>

<styledText styleClass="OraInstructionText"
text="${textSource.REG_PAGE_EXPLAIN}"/>

<header text="${textSource.REG_COMPANY_INFO}">
<contents>
<stackLayout>
<contents>

<labeledFieldLayout id="TpPartialDetails" width="80%"
labelWidth="40%">
<contents>
<messageChoice name="OracleAppsCustFlag"
prompt="Oracle Apps Customer"
required="yes" statePreserved="true"
selectedValue="${ui:defaulting(uix.pageProp.OracleAppsCustFlag, 'select')}">
<primaryClientAction>
<firePartialAction event="buyorsup"
targets="TpPartialDetails"
formSubmitted="true"
unvalidated="true"/>
</primaryClientAction>
<contents>
<option text="-select-" value=""/>
<option text="${textSource.YES}" value="Y"/>
<option text="${textSource.NO}" value="N"/>
</contents>
</messageChoice>
<messageTextInput prompt="${textSource.ORACLE_CSI_Q}"
name="OracleCsi"
text="${uix.pageProp.OracleCsi}"
rendered="${ui:defaulting(uix.pageProp.OracleCsiRender, 'false')}"/>
<messageTextInput prompt="${textSource.YOUR_TP_NAME}"
name="TpName"
tip="${textSource.YOUR_TP_NAME_TIP}"
required="no"
text="${uix.pageProp.TpName}"
rendered="${ui:defaulting(uix.pageProp.TradeswithTPRender, 'false')}"/>
<messageTextInput prompt="${textSource.YOUR_TP_ALIAS}"
name="TpAlias"
tip="${textSource.YOUR_TP_ALIAS_TIP}"
required="no"
text="${uix.pageProp.TpAlias}"
rendered="${ui:defaulting(uix.pageProp.TradeswithTPAliasRender, 'false')}"/>
</contents>
</labeledFieldLayout>
</contents>
</stackLayout>
</contents>
</header>

<header text="${textSource.TP_DEFAULT_CONTACT_INFO}">
<contents>
<labeledFieldLayout width="80%" labelWidth="40%">
<contents>

<messageTextInput prompt="${textSource.PASSWORD_PROMPT}"
name="Password" id="Password"
required="yes" secret="true"
maximumLength="32"
text="${uix.pageProp.Password}"/>
<messageTextInput prompt="${textSource.PASSWORD_CONFIRM_PROMPT}"
name="PasswordConfirm"
id="PasswordConfirm" required="yes"
secret="true" maximumLength="32"
text="${uix.pageProp.PasswordConfirm}"/>
</contents>
</labeledFieldLayout>
</contents>
</header>
</contents>
</header>
</contents>
</bc4j:rootAppModuleScope>
<spacer height="10"/>

<inlineMessage required="yes"
prompt="${textSource.REQUIRED_FIELD}"/>
</contents>
</form>
</contents>

</myTemplate:xhubTpAdminPageLayout>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>

<handlers>

<event name="continue">
<bc4j:findRootAppModule name="XhubRegAM">
<method class="oracle.apps.snw.tpadmin.webui.RegistrationHandlers"
method="register"/>
</bc4j:findRootAppModule>
</event>

<event name="cancel">

<bc4j:findRootAppModule name="XhubRegAM">

<bc4j:rollback/>

<go name="main"/>
</bc4j:findRootAppModule>
</event>

<event name="buyorsup">
<bc4j:findRootAppModule name="XhubRegAM">

<method class="oracle.apps.snw.tpadmin.webui.RegistrationHandlers"
method="isBuyerorSupplier"/>
</bc4j:findRootAppModule>
</event>
<event name="*">
<bc4j:findRootAppModule name="XhubRegAM">

<method class="oracle.apps.snw.tpadmin.webui.RegistrationHandlers"
method="setContext"/>
</bc4j:findRootAppModule>
</event>
</handlers>
</page>
Please suggest if you know of any documentation on ADF UIX partial page rendering.
ADF UIX has very little documentation online and finding it hard to debug this issue.
It ll be of great help.
Thanks
Kamal

Hi Jason,
As of EA9, all rendered components support a partialTriggers attribute. This attribute takes a list of master component IDs. If any of the master components are updated via a partial event, the dependent component will be rerendered in the partial update.
If you are on an earlier release, you should upgrade.
Thanks,
Jeanne

Partial page printing with newer HP Laserjets and Xerox printers

Post Author: lazytrbar
CA Forum: .NET
I have been using Cyrstal Reports Developer 9.2 with .NET 2003 for a couple years now with no problems. We recently installed some new printers. HP Laserjet 4250 and Xerox Phaser 6300N. On both of these new printers the crystal report printout comes out as only a partial page. The area of the report printed is only about 4 inches x 4 inches in the upper left hand corner. The rest of the page is blank. It is not a margin setting on the printer. All other printouts work correctly from web, office products, etc.
If you force the 4250 to use the older 4100 printer driver the problem goes away but that is not a good long term solution. What do I need to do to get my Crystal Reports to work on these newer printers???
I appreciate any advice.

Had similar issue with my HP Deskjet F4500C All in one printer, here's what I did:
make sure these packages are installed or install them
pacman -S cups cups-pdf hplip pyqt3 python2-pyqt
pacman -S system-config-printer-gnome
rc.d cups start
To add device and install hp driver:
1. Run ‘hp-setup’ as root.
2. Click ‘Show Advanced Options’ button and check-enable ‘Manual Discovery’.
3. Enter IP address 192.168.59.63 in the ‘…device ID…’ entry and click ‘Next’ to install driver.
run system-config-printer as root, to add printer
# system-config-printer
click “Add”， Select Device -> Network Printer -> input the IP address of the printer such as “192.168.1.3″, click “Find” -> “Process”
you should be ok from here, if not some further steps:
If you encounter the following error:
File “/usr/share/system-config-printer/newprinter.py”, line 1531, in getNetworkPrinterMakeModel
debugprint (host + “: ” + args)
TypeError: cannot concatenate ‘str’ and ‘list’ objects
You should comment out the error line at 1531 of newprinter.py, and then continue to add the printer.
4). Finally, you can run hp-check to see what problems exists for the printer.

Canon printer only printing a partial page.

I updated to 10.10.1 and my Canon MG5522 will only print part of the page and then it faults for lost of communication. I've tried deleting the Canon folders in the Library and emptying the trash. Restart the computer and installed the new printer driver from Canon for my printer. Added the printer but it would still only print a partial page. Any ideas on what to try to fix the problem. Thanks!!

Just to be sure it is not an OS or driver fault, connect the MG to the Mac via USB. This will either create a new printer automatically or you will have to open Printers & Scanners and add the printer. Then see if you can print a full page.
If that works, disconnect the USB cable to the MG and reconnect to the wireless access point. Then open Safari and enter the IP address of the MG as the URL. This will connect to the internal web page of the MG and here you will see the strength and quality of the wireless signal. If either is below half then try restarting your wireless router so that it picks up another channel, working on the assumption that the current channel being used is crowded.
Also, if your wireless router provides 2.5Ghz and 5GHz channels, try disabling the 5GHz channel and restarting the Mac and MG to see if that improves the wireless stability.

Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery

Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery args.get_isPartialLoad().
My page is loaded into a palcehold within the Ajax update panel within the current Masterpage, so page loadload doesn't occur. But if my Muse page can capture the partial pageload then I can tell jquery to run the Muse formating routine.

Jackie, I am having the same issue and agree that it obscures our site analytics.
I only have the "WebMarketing" subscription - so I cannot see how often people visit my site (unless I just dont know how to view that). Here is a screen shot of how many different locations I have and how much it affects my site visitor count based on the other locations which seem "legit" because they have more page views than visits.
I hope there is a way to fix or block this.

URGENT - Partial Page Caching - Oracle WebCache

I'm trying to simply test partial page caching by attempting to cache all of a user interface template (and the associated page) except for a "Hello #user#" command which results in a personalized greeting on the page.
I've attempted to do this by following the WebCache documentation, but they keep mentioning inserting a command in the HTTP response message to indicate the use of ESI, and I have NO idea how to access this, or if it's even necessary.
Is there a simple way to accomplish my goal?

The surrogate-control response header is necessary in order to tell Web Cache that the content is marked-up with ESI and that it will require processing.
A future version of Portal will do ESI out-of-the box. In the meantime, I am not familiar enough with Portal internals to be able to tell you
exactly how to set this response header.
I'm not sure if it would work for you, but if you're only looking to substitute different user's names on a particular page, then you could try using
the <webcachetag> functionality. This isn't part of ESI, but a lot of customers are using it to do simple personalization of the kind you mentioned.
This feature is documented in the Web Cache Admin and Deployment Guide -- I think the topic is something like "Simple Personalization".
With this feature, you don't have to set any response headers. However, you do have to configure the cache correctly so that it knows which pages require
the substitution operations. The 9.0.2 version of the Web Cache software and doc can be found from links off of http://otn.oracle.com/products/ias/web_cache/

Partial page refresh is not working in APEX 4.0

Hi All,
I have a report region in my application,I have selected the following properties for the region,
Pagination scheme - Row ranges X To Y (with next and previous links)
Enable partial page refresh - yes
Display position - bottom -right
Their is an arrow mark link(next /previous) in the right bottom corner,when i click on that ,the region is displaying the next 15 rows, but the region is not getting refresh,the scroll bars are al went off if i click the previous/next link.
After that i refreshed the page by clicking F5 ,scroll bar is appearing now.
In the region header and footer i have added this code,
<div style="overflow:auto;">
</div>for scroll bar
Please some body help me to fix this issue..
Thanks & Regards,
Ramya.
Edited by: Ramya on Apr 15, 2012 10:42 PM

Hi All,
I fixed this issue.
I used Skillbuilders modal popup plugin, to open the form page as popup when i edit the record.To implement this plugin i have already created dynamic action for edit ,create and autoclose the popup.
In the dynamic action i changed the EVENT SCOPE from BINT To LIVE and tested the application.Now its working fine.
I can able to edit the record after i hit the next/previous pagination link .
Thanks ,
Ramya.

(Classic) Report losing pagination on partial page refresh - APEX feature request

I have a page with both an Interactive Report and some classic Report regions.
Based on user updates, there are many occasions where I need to do a partial page refresh.
Thanks to plugin http://www.apex-plugin.com/oracle-apex-plugins/dynamic-action-plugin/refresh-interactive-report-1.0_361.html
I'm able to refresh my IR, but not my classic report (unless I do a submit of the whole page) without losing pagination.
Request: Will a Dynamic action 'Refresh without losing pagination' be part of future apex versions?
Now, in apex 4.2, is there another work around available for classic reports?
(I use 'submit page' now as action, but it's at least a second slower as a partial refresh, and because I need it on every user update, this second becomes a big addition to user frustration).
Thanks, JP

Here is the solution for your problem:
https://apex.oracle.com/pls/apex/f?p=31517:243
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494

Partial page view on web page

Similar Messages

Maybe you are looking for