Partial Payments- Customer Clearing

Hi
I have a partial payment which was received from a customer . I received another partial payment againt the same invoice which completes the invoice . In both instances f-28 was used. The system still shows the invoice as open . Is there anyway i could have these invocies cleared without having to do F-32. I guess iam missing some config for automatic clearing. .
Please suggest
Thanks
SAPSRI

Hi
When you make the second posting using F-28,
You would need to select both the invoice document and the first partial payment document
If you select only the invoice document. all 3 documents would not be cleared.
Please check
Regards
Sach!n

Similar Messages

Assignment field (ZUONR) in partial payment customer

Hello,
We have an issue concerning the assignment field in the partial payment from a customer.
In the assignment field (ZUONR) we normally have the invoice numbers from another application (via interface to SAP).
When we receive a partial payment from a customer via bank statement (MT940 EBS file), we get a payment advice in FEBAN. on the correct invoice. It is not booked because the difference is too large. That is correct!
Our debtor department delete the payment advice and the use post item (in FEBAN) to create a partial payment (via FB05).
Instead of the assignment from the invoice document, SAP puts another number in ZUONR for the first posting area. Afetr investigation it seems like it is a part of the payment advice number!?
When we manually create a partial payment (without first having a payment advice from EBS), we get the (actual) date in ZUONR.
In the screenprints attached, it is shown.
In the attachment BSEG part 1 and BSEG part 2, the assigment fields with their values are visible as result of FB05 from post item in FEBAN.
For those items there was a payment advice, which is deleted (first). Assignment (ZUONR) is a "strange" value, part of payment advice number!?
BSEG part 3 and BSEG part 4, the items are shown when partial payment is manually entered (via FB05) without payment advice via EBS in FEBAN. Then a date is filled in assignment (ZUONR) field.
Is it possible to arrange that the assignment field (ZUONR) gets the value of the original invoice, on which the partial payment is created?
Is that possible with customizing?

Hi,
The ZUONR is filled by the Sort key in the account's master data. This sort key is defined in the OB16.
And check the path below: Accounts Receivable and Accounts Payable --> Customer Accounts --> Line Items --> Display Line Items --> Display Line Items without ALV.
JPA

Customer Invoice - Partial Payments

What transaction is used to list all the documents that are been related to a Cleared Customer Invoice and its corresponding Partial payments made. (Lets say I have a customer invoice, which had four partial payments to clear the Invoice)
Thanks.
YV

Thank you surya. But all my open items are already cleared, so I can not go and check in F-32.
I have to go to FBL5N to see that Transaction Details , but while doing so it also brings in other transactions in the list. I wanted to restrict myself only with a specific transaction and its related documents.
Do we have a Transaction in SAP which can help me out to filter the invoice and its related documents, which helped to clear the invoice.
Thanks.
YV

Clearing Partial Payments

hi Guys,
i had created vendor invoice of rupees 1000 and paid partially rupees 400 and then 600 in two payments. this should be cleared item since the payments made against the invoice is equivalent to the invoice amount. when i try to pay against the same invoice in f-53 still the payment is posted.
kindly let me know how to clear the partial payments.
With regards
Pradeep N

Hello,
You have an invoice for INR 1000
You made first partial payment by uisng F-53 for INR 400
Now if you see FBL1N report it given 1000 CREDIT and 400 DEBIT as open items and 600 CREDIT balance in the vendor account
Now you go for second partial payment using F-53 for INR 600
By default earlier two items gets selected 1000- and 400 (NET 600) and all the three items will be cleared.
The wrong you did here is the system automatically shows both items in blue colour and gives you the net of 600. Do not make any item unselected (it would turn to black). You keep them in blue and make payment for 600.
ALL Three items gets selected and cleared with each other.
Because you are deselecting the payment of 400 which you have already done, the system is not able to clear the items, but posting one more payment item against the invoice.
Because of this wrong way of handling, if you see FBL1N you will see them all as open items.
Do not deselect any open items. If you deselect the open items, you can even post any number of partial payment against the invoice.
You should clear the open items manually by using transaction code F-44 and select everthing means, invoice, first partial payment and second partial payment, then clear it.
Hope now you understand how the system functions.
Thanks,
Ravi

How to monitor partial payment

Dear All:
In my case, I always pay more money for original AR because I forgot partial payment had been done before. How I monitor AR overpayment when past partial payment exist?
Thanks for the help suggestion first. Sorry for error description above.
1.first for specific overdue analysis policy of company, we use partial payment.
2.And then the question comes. According to contract item, we send invoice to customer only once and receive payment in several step. Each time income received, we use partial payment to clear the AR (to relate payment with original AR). But one customer may have some contracts with us, it always pay for all contract in certain amount at one time. We shall manually divide amount for each contract. If user forgot one contract was paid partially before, he may clear the AR totally at sencond time and then the first payment will still outstanding in open item. Finally we can find many partial payments received but can't refered to any invoice.
So we are finding a way to control AR clearing to check whether partial payment exist and if the total amount is over original invoice it couldn't be cleared.
Thanks to give me some suggestion.
Message was edited by:
        Tommy shi
Message was edited by:
        Tommy shi
Message was edited by:
        Tommy shi

Hi...
You always have the otion of displaying vendor/customer balances(FK10N/FD10N) to find out the balances and the vendor/customer line items(FBL1n/FBL5N)
When you pay your vendors select residual payment so that the system will select the residual item remaining to be paid to avoid any confusion.
Its a good business procedure that you should not be paying your vendors more unnecessarily.
Regards
Aravind
Assign points if useful

F-03 - partial payment

Dear all,
I want to use F-03 to clear open items of a GL account.
But the system is creating a new document instead of clear with one of the documents I choose.
I have initially chosen to do a partial payment (twice) and the payment item remains open.
I want to do partial payment because I don't want to create other document.
Ex:
Document     Value
20          10
30          10
40          10
50          10
60          -40
I want to clear 20 and 30 once with document 60 (partial 20), and other time with 40 and 50 and 60 again (partial 20).
Why the system is not clearing the document 60. And creates 2 new documents?
I know the sum is null, but I have to do this clearing in twice moments. It is possible?
Thanks,
P.

Hi,
    Partial payment never clears the open item unless it is fully cleared. For Eg: Suppose say you have an open item of 100$ and by using partial payment you paid 50$ the line item for 100$ will still be as an open item and a new document is created for 50$ by the system, only when you post the remaning 50$ the system takes these two 50$ line itmes into account and clears the invoice.
IF you dont want to have a new document follow residual payment were the system show only 50$ as open item after paying 50$ initally. But in most of the scenario company follow PARTIAL payment because the system shows the entire amount as open and the company can have tax benefit by showing the open items as liability.
Edited by: LOKY46 on Aug 8, 2011 7:27 PM

Customer clearing of partial payments

hi,
we have a partial payment applied to one particular customer account, the documents are showing as all open.
we need to clear them as the docs are not flowing into BI cube due to open status, please let me know any tcode to use inorder to bring them to clear status .
thanks.

F.13 can also be used
Regards
Sanil Bhandari

Partial Payment posting in AR and clearing of invoice on fifo basis

Dear Gurus,
It is related to partial incoming payment in AR and clearing of invoices on FIFO basis, let me clarify my requiremnt through an Example
Assume there an ivoice of PKR 100,000 in customer Account XYZ
Company received partial PAyment of PKR 50,000 on specific date
Data entry clerk enters payment in F-28 in partial payment tab and assign it to invoice (please note that at present payment is not being assigned and both item invoice and payment remains open without any assignment with each other)
assume next payment which data entry clerk tries to enter with this refernce is PKR 60,000 while reamining amount with this invoice refernce is PKR 50,000 ,system should not allow to enter excess amount with partial paid invoice i.e. user has to be restricted to enter PKR 50,000 against this invoice
As data entry clerk enter partial payment and there is any other open invoice, system should not allow to enter payment till clearance of first open invoice
means specific requirement is
in case of partial payment with refernce to invoice, at the time of data entry system should chekc that no any other invoice is open in AR ledger
as partial payment document is entered system assign this document to Invoice
if data entry clerk tries to enter acess amount with refernce to invoice, system should not allow means Invoice amount = Payment amount
please advice procedure to meet this requirement
BR
sajida

Hi,
For posting partial Invoice, At the time you received 50000, post it through F-28 only as a partial knockoff against a particular Invoice and at the time you enter second part of the Payment in excess of 50000, the system will not accept as the remaining amount of the Invoice is 50000 only.
For Fifo Invoice Clearing -
At the time of Posting F-28, click on "Distribute by age" the system will automatically clear the value on FIFO Basis.
Regards,
Prashant

Posting a partial payment for customer receipts with full amount

Hi,
Is there a way by which I can post the full amount of the invoice as a partial
receipt (that is without clearing the open items but at the same time linking the invoice and the amount). If I use F-28 the system clears the line item if the partial payment amount equals the invoice amount.
The scenario here is a PDC received from the customer. I would like to post the credit to the customer account as a partial payment and debit a special GL account for PDC received. For finding out the customer ageing I shall not use the credit (as the PDC has not yet materialised). This can be done by posting the PDC entry using a different document type and excluding it from the selection criteria. At the same time customer account statements should be sent to him/her after considering the PDCs received (the assignment field will contain the invoice number and therefore can be summed). Only when the PDC is deposited and cleared do I want to clear the partial payment (if the amounts match) using the assignment field. The Cheques due on any date can be obtained from the Special GL account.
Or can anyone think of a better way to solve the issue.
1. PDCs should be credited to the customer account when it is received.
2. The users know about the invoices pertaining to the PDCs only at the time of posting the PDCs and not during the time it is deposited into the bank. Therefore the linking should be done at the receipt of PDC stage itself and not later.
3. Customer account statements have to be sent after considering the PDCs.
4. A/R information system should not consider the PDCs received to the customer account.
5. I should be able to quickly choose the cheques I want to deposit and transfer it to the Incoming Bank Account.
Any help will be appreciated with points (and lots of them )
Rgds
Shivram.

Hi
I would suggest you treat the PDC as a noted item which is only for statistical purpose. You can post the PDC cheque to the customer account through transaction code F-38 which will post as noted item in the customer account. If you want to analyse the age-wise outstanding from the customer exclude the noted item. You can enter the invoice no for which payment is received in the assignment column which will be useful for sorting purpose. If you want to know what are the cheques to be deposited for the day, you can take the same by selecting the due on date from the customer accounts using the noted item indicator. By using this indicator the credit management for the customer can also be done.
After depositing the cheque, reverse the statistical posting and make fresh posting as debiting Bank a/c and crediting customer account.
Hope it will help you to some extent.
Regards,
K Lakshmanan

How to do Customer Partial payment through APP

Dear Experts
How to Customer partial Payment Through APP
Regards
Ajeesh.s

Dear Expert
My query was about Part payment process about customer , In AP there is a process for doing part payment in Vendor Same kind of a process am looking for Customer too
PARTIAL PAYMENT FOR APP PROCESS
Some time we face the issue in which client want to pay partial invoice only that to via automatic
Payment program, so in order to make it feasible what all steps will be required from configuration point of view has been explained below.
Configuration steps:
1) Maintain Account Configuration TCODE: FBKP Select the Sp.G/L-P
2) Maintain Payment Program: TCODE: FBZP
Path: SPRO - Financial Accounting - Accounts Receivable and Accounts Payable - Business Transactions - Outgoing Payments - Automatic Outgoing Payments - Payment Method/Bank Selection for Payment Program - Set Up All Company Codes for Payment Transactions
Go to “ALL COMPANY CODES” screen maintain the Sp. G/L – P in the field Sp. G/L transactions to be paid.
3) Post Vendor Invoice and Block for Payment TCODE: FB60 / F-43
Path: Easy Access – Accounting - Financial Accounting - Accounts Payable - Document entry - FB60 – Invoice / F-43 - Invoice – general
Example you made invoice for 25000
4) F-59 - Payment request: TCODE: F-59
Path: Easy Access – Accounting - Financial Accounting - Accounts Payable - Document entry - F-59 - Payment request
Here you would like to pay only 20000 out of 25000 so change the amount to 20k and save it
5) Payment Run TCODE: F110
Path: Easy Access – Accounting - Financial Accounting - Accounts Payable - Periodic Processing - F110 – Payments
6) Vendor balances after F110 TCODE: FBL1N (After processing you can check the clear amount here)

F-28 - I want to clear invoice with partial payment but wanna keep ageing as per original invoice

Hi All,
Normally, I am clearing partiall payment with partial option in F-28. But that shows both the invoice and payment entry in the open item.
Now I am trying to clear partial payment with Residual option. But in this I also want to keep the ageing of the residual balance same like original invoice. Currently if I am doing this, residual balance ageing comes in the latest. which is wrong. and shows a incorrect debtors ageing.
How can I do this task. Kindly help!
best regards,
adnan abbasi

Hi,
Please check your configuration for customer tolerances
Path: Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Open Item Clearing -> Clearing Differences -> Define Tolerances for Customer/Vendors.
Choose your company code, double click to get the details setting of Tolerance.
Here, You tick on "Payment term form Invoice".
By this way, when you do Residual payment, the payment term will be copied from original invoice to new document.
Julie

Customer Clearing Process - Partial and Residual

Hi Gurus,
Appreciate if you can please help me in understanding customer clearing process in case of partial and residual payment. And how will it have impact on AR Aging.
If we post customer invoice for $1000 and there is a payment of $600. Now if we use residual payment option, system should show $400 line with aging according to original invoice. But i cant see that if i go to FBL5N.
Please tell me how it works,
Thanks

Hi,
During the partial payment the new document gets created.
You can do one thing go to table BSAD and in the invoice reference (REBZG) field enter the original document number and execute.
You will get the residual document number (AUGBL). Check whether you are getting this document number in agewise report.
Hope your issue has been resolved else revert.
Regards,
Tejas

Custom clearing agent payment issue

Dear experts
Purchase order was created and the material was received on port (imports).
custom clearing agent has cleared the goods.
now custom clearing agent needs his charges.
the inv from vendor with reference to PO is not received.
any solution to settle the custom clearing agent payments.
till the inv. from vendor not received custom agent payment is is pending.
what should be done to resolve this issue.

Hi,
Copy one of your freight condition types and create a new condition type as custom clearing charges, please ensure that condition category is Delivery charges (B). In calculation schema enter this condition type at the appropriate position. Now when creating the PO, enter this condition type put the value, then select this condition type and go to details, here you will have a field to enter the vendor code, there key in the vendor code of custom clearing agent.
Now in MIRO enter PO no. and choose layout for Planned delivery cost, you can now enter the value for your agent and pay him.
Note: Please use this to pay only for service charge for the agent, for payment of custom duty you should use the condition type for custom duty and key in the vendor code for the customs clearing office there so that its easy to differentiate between custom duty and the service charges charged by clearing agent.
Regards
Chandra Shekhar

Issue regarding partial payment & cleared items.

hi Techies,
I want to develop report which should show all cleared item. (accounting document no, corresponiding basic amount). End user is using residual clearence procedure for partial payment. i.e.,
consider if vendor has to pay rs 10000 as service tax to company , its stored in open items against one Accountin Document no.
Belnr            Amt
000101 -
> 10,000
supppoes he pays 3000
system is creating one clearing document against this 3000 payment.
NOW REST OF 7000 EARLIER CLERING DOCUMENT IS BECOME ACCOUNTING DOCUENT . THIS CYCLE IS CONTINE UNTIL CLEARS ALL THE AMOUNT.
INTIAL STATE.
000101 -
> 10,000 -
> CL1. (PAID 3000)
SECOND STATE
CL1        -
>   7,000----
> CL2 (PAID 3000)
THIRD STATE
CL2        -
>   4,000----
> CL3 (PAID 3000)
FOURTH STATE
CL3        -
>   1,000----
> CL4 (PAID 1000)
FIFTH STATE
CL4        -
>   1,000----
> CL5 CLEARS ALL AMT
HE WANT TO DISPALAY ACCOUNTING DOCUMETN NO WHICH ARE CLOSED (I.E. CLEARED )
AT THE END OF FIFTH STATE ONLY THIS ACCOUNTING DOCUMENT NO SHOULD DISPLAY IN REPORT OTHEWISE NOT.( IE IF USER RUN THE REPORT AT SECOND OR THIRD STATE, THE ACCUNTING DOCUMENT NO SHOULD NOT DISPLAY )
THERE IS NO LIMIT OF PARTIAL PAYMETNS I.E VENDOR CAN PAY HIS AMOUNT AS MANY TIEMS HE WISHES.
IS THERE ANY SOLUTION TO THIS REPORT...
REGARDS
RAJU

Hi,
Yes it is possible.
Check the docuement types of the documents, you should get the answer in that.
Regards,
Prakash Pandey

Display Totally paid items(cleared items), partial payments and residual pa

Hi Experts,
I am working on one requirement,
Requirement: Display Totally paid items(cleared items), partial payments and residual payments.
I am fetching data from BSAD table for Totally paid items, but I want to understand what are the fields to check when fetching data.
Partial payments: Please let me know the logic to get data for partial payments from BSID table.
Residual payments: what are the tables to check for residual payments and the logic.
What are the fields that i have check and what are the fields that I have to check and get.?
Please let me know what ever you know about this.
Regards,
Dileep,

Hi,
All types of Payments either Totally paid items(cleared items) or partial payments and residual payments the Document Number serious will b same. Try to extract by Filtering Assignment Field .
Thanks
Goutam

Partial Payments- Customer Clearing

Similar Messages

Maybe you are looking for