Partial Recording Failure

Is there any way of establishing whether a recording has worked fully? I startd to watch something last night and after 5 minutes the recording stopped. There were no indicators on the menu screen to indicate a recording failure.
Solved!
Go to Solution.

Thanks. Perhaps I just missed that. I guess it's worth checking each time a programme has been recorded, especially if you aren't going to get around to watching it for a while - dependning on what it is, there's always the catch-up route as a backup.

Similar Messages

Import Error (Partial Set failure with RC error code = 0x84020020 for rec

Hi,
While importing the data through xls file , i am getting the error message "Partial Set failure with RC error code = <0x84020020> for record number
0 through 212" and no record get created in Data manager.
Although i mapped all values , still it giving me an error message.
I tried to Import other data and it was all working fine.
Please guide
Regards
Sandeep Kumar

HI,
I checked the exl file and found that in the first column and first data was in text format ('0001)but later on when i change the record and moved it to the last record , it worked fine. I was able to load all records including ('0001)
I don't know wht the logic behind this:
if my first record was ('0001), system was giving me the error and not allowing me to load the data. But when i moved the record as the last record it not only allow me to load the records but allow ('0001) also.
If anyone have any clue , plz let me know.
Regards
Sandeep

HT2801 HOW DO YOU KNOW WHAT IS AVAILABLE CAPACITY OF CD THAT IS PARTIALLY RECORDED

I have just intalled the USB Superdrive on my IMAC. It works fine.
My question is how do you find out what is the remaining cpacity on a partially recorded CD?

Another way is to insert the CD into the drive, let it mount on the desktop, click your mouse once on the CD/DVD icon and use the keyboard key combination Command-I.
This will tell you the capacity of the disc, how much was used and what was left of the CD's total capacity.

Prime Infrastructure 2.0: Inventory Collection - Partial Collection Failure on 2 of 4 VSS WS-C6509-E

Hello,
I've got a strange behaviour regarding the inventory collection for 2 of 4 virtual switching systems.
That means the inventory collection for two VSS is succesfull (inventory collections status = Completed) for the other two systems it is not, see attachments.
The device credentials like SNMP-RW, SSH acces are OK. I've already tried to increase SNMP timout and retries as well as telnet/ssh timout without success
All 4 systems are identical regarding hardware model and software vesion.
HW: WS-C6509-E
SW: 12.2(33)SXJ3
Any ideas or suggestions?
Best regards,
Bastian

TAC and I found a bug, CSCum05301.
May be that is also helpfull for others.
https://tools.cisco.com/bugsearch/bug/CSCum05301/
Symptom:
Inventory collection will fail if following keywords are used as part on description command on the interface config level of IOS device: 1Gbps, 10Mbps etc.
Following error message is visible on the DWC:
Inventory Collection Status: Partial Collection Failure
Collection Status Failed feature(s)
Unable to configure DSL, Serial, POS, Ethernet, Loopback, Virtual-Interface, Tunnel, Vlan, Switchport and Service Module interfaces on ISR, ASR and Switches.
Conditions:
Speed keywords like 1Gbps, 10Mbps etc. available as part of descrption command in IOS interface level.
For example:
interface FastEthernet0/3
description 10Mbps
Workaround:
Use a space character between number and unit keyword, like 1 Gbps.

How to design a grid to withstand a partial network failure

Hi,
We are evaluating Coherence for a mission-critical system where we want to test partial network failure scenario. We want to run 4 physical hosts, 8 JVMs with 2 JVM on each host. The evaluation criteria is to connect 2 machines on either side of a router, kill one side during a load test, thereby disconnecting the 2 machines and run with the remaining two. In order to have a fail-safe behavior in this scenario, I guess we must ascertain that the back-ups for the objects on one side of a router are always made on the other side. Can Coherence detect such a network set up and store backups accordingly? Or is there a way to configure this by overriding the default behavior?
Pls advise
Thanks,
Sairam

Hi Sairam
If you use scenario 1) then your test will work. As this scenario only has two machines then the primary node for a piece of data will be on one machine and Coherence will make sure the backup is on the other machine. If you then break the link between the machines or lose a machine you will not have lost data.
If however you have more than 2 machines then you break the link between them you have what is known as a split-brain - which means you have effectively split your cluster in two. Both sides only know they they can no longer see the other part of the cluster and assume they are must be the remaining working part. In this case though you will have lost data from the cluster as some of the backups for each part of the cluster will be on the other part. There is nothing you can do about this, you cannot control which machines backups are allocated to.
Increasing the backup count to 3 does not give you any more reliance than having a backup count of 2. As far as I know Coherence only guarantees that the placement of the first backup is on another machine.
I am not quite sure what you are trying to test as a Coherence cluster cannot automatically survive a network failure that splits the cluster. There are things in 3.6 that you might be able to do with Quorums to mitigate the damage while you recover and there are things you can do to make recovery easier - but you will have to recover lost data.
JK

Prime Infrastructure 2.1 ASA5580- Security Context Partial Collection Failure

I am attempting to add my ASAs into prime but get stuck almost instantly after adding the new device. Prime is able to get the device name and Device type (Cisco ASA-5580 Adaptive Security Appliance Security Context) Admin status shows up as Managed but Inventory Collection Status shows up as "Partial Collection Failure" For more detail it says "feature_image_firewall Unexpected error. See the log file inventory.log for details."
The only failure in inventory.log I could find was
[2014-09-26 12:40:01,868] [ICE Service[ 1]Thread: 20] [inventory] [ERROR] - 192.168.0.19 For device id: 2848866 Feature = feature_image_firewall and Procedure = ImageFireWal failed in time 45 with the following error and continuing with other features: com.cisco.nm.expression.function.FunctionException: <palError><deviceId>2848866</deviceId><code>HANDLER_ERROR</code><message>Error while trying to run handler. Action : imageFireWall, Handler : com.cisco.nm.pal.customhandler.RPLHandler. Error : Exception thrown : Constraint violation. See log for details.</message><handlerCode>ERROR_HANDLER_ERROR</handlerCode></palError>
[2014-09-26 12:40:01,868] [ICE Service[ 1]Thread: 20] [ice] [ERROR] - com.cisco.nm.expression.function.FunctionException: <palError><deviceId>2848866</deviceId><code>HANDLER_ERROR</code><message>Error while trying to run handler. Action : imageFireWall, Handler : com.cisco.nm.pal.customhandler.RPLHandler. Error : Exception thrown : Constraint violation. See log for details.</message><handlerCode>ERROR_HANDLER_ERROR</handlerCode></palError>
com.cisco.nm.expression.function.FunctionException: <palError><deviceId>2848866</deviceId><code>HANDLER_ERROR</code><message>Error while trying to run handler. Action : imageFireWall, Handler : com.cisco.nm.pal.customhandler.RPLHandler. Error : Exception thrown : Constraint violation. See log for details.</message><handlerCode>ERROR_HANDLER_ERROR</handlerCode></palError>
As far as the ASA config goes:
snmp-server enable
snmp-server host management 192.168.10.27 community c!$c0PR!me version 2c
logging enable
logging history 7
snmp-server enable traps
The above config works on our ASA5520s except I still haven't set up the traps right because there isn't any useful information on those devices so I am not sure what I need to change?

My ASA is using DH 1.
For 9.2(1) I read this in the release notes.
Note The ASA 5510, ASA 5520, ASA 5540, ASA 5550, and ASA 5580 are not supported in this release or later. ASA Version 9.1 was the final release for these models.

Partial collection Failure for nexus 5548UP in PI 2.1

Hi there,
I get "Partial Collection Failure" in the inventory collection status in Prime Infrastructure for all my Nexus 5548UP (8 devices).
i have seen in the PI 2.1 release notes that a bug CSCum16230 which look like my problem has been resolved in PI 2.1 but i continue getting the "partail collection failure"
Would like to know if the bug is still exist or get any other help to solve this problem.
Regards,
Alon.

hello
I have this problem as well...
we've got four N5K-C5548UP. Two with a layer 3 daughter card and two without.
interestingly we see the issue just on those boxes with the l3 daughter cards N55-D160L3-V2 installed...
Any help or ideas are highly appreciated
regards
roman
Sh inventory:
OK:
device-a# sh module
Mod Ports Module-Type Model Status
1 32 O2 32X10GE/Modular Universal Pla N5K-C5548UP-SUP active *
3 0 O2 Non L3 Daughter Card N55-DL2 ok
Mod Sw Hw World-Wide-Name(s) (WWN)
1 5.1(3)N2(1c) 1.0 --
3 5.1(3)N2(1c) 1.0 --
NOT OK:
device-b# sh modu
Mod Ports Module-Type Model Status
1 32 O2 32X10GE/Modular Universal Pla N5K-C5548UP-SUP active *
3 0 O2 Daughter Card with L3 ASIC N55-D160L3-V2 ok
Mod Sw Hw World-Wide-Name(s) (WWN)
1 5.1(3)N2(1c) 1.0 --
3 5.1(3)N2(1c) 1.0 --

Cisco Prime 2.1- Partial collection failure

Dear Experts,
We are seeing many devices (around 1000+ devices) showing as "partial collection failure". We found this coz of not updated Telnet/SSH Cli username and password. So instead of editing each and every device, is there any way to select all devices and update cli credentials in one shot..?
If someone helps me this option, it will be so helpful.

Hi ,
Other way is to export all the devices , Edit it and then Import it.
Operate >device workcenter > EXPORT device \ BULK IMPORT
Thanks-
Afroz
****Ratings Encourages Contributors ****

About udate record failure

Hi all,
I have seen update record failures in sm13 with error, what should i do first?
kind regards,
praveen

Hi Praveen,
Follow the below steps to avoid data inconsistency in production environment,
1. In SM13, check whether the `Update is in active` status , if yes, then the problem is with certain user action. If not, check the table space status. whether any table space has reached 100%. If the table space has reached full , extend the table space and change the update to active. SAP will automatically change the status to inactive if any of the table space reaches 100%, this is to avoid inconsistency.
2. If it is not related to table space problem, check the failed update error. if you double click on that error, you will get the detailed error report..where it got failed and in which transaction it happened etc.
Normally, update errors are to be handled with coordination from Func and end user. Find out which user action has triggered this update error etc. Ask your func team to check if there is any business impact due to this error ( due to missing document etc). if there is any, ask your func team to analyze the situation and repost the failed document.
Once the business impact is fixed, ask your func team to search for any notes available in OSS for that particular transaction which caused the update error. in general, there will be some corrections or SAP will recommend to apply note.
This will solve the problem.
Hope this will help you a bit to analyze the update error situation.
regards,
Vinodh.

Update records failures

Hi All,
I am working on ecc6.0. I can see update records in my system. Due to reason of
"SAPSQL_ARRAY_INSERT_DUPREC" .
Error pened?in the ABAP Application Program
The current ABAP program "SAPLV60U" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
please suggest me ho to overcome from this?
regards,
praveen

Praveen,
There are several posts which give solution to this error. Use the search function on SDN forums.
Look at the following thread:
Reg: Update Failures
Cheers,
Nisch

Partial recovery failure

I am repairing a hp laptop DV7 for a friend, I have the recovery dvd's and drivers dvd
but all I get is a message that the recovery has a partial failure. I can never
get the system restored to factory settings.
I loaded windows 7 64bit pro easily, but I could not get the drivers
loaded because the nic card driver could not be loaded.
What is wrong with this proceedure I thought it was supposed to be
simple? change the boot order to make the dvd drive first
and install the dvds in order.. What is missing from this picture in getting
this DV7 laptop working?
Thanks.

Hi:
This is the link to the support and driver page for the notebook:
http://h10025.www1.hp.com/ewfrf/wc/product?product=5189529&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
Like I said, I need the hardware ID's. For example, note the list of wireless network adapters.
You need to know the hardware ID's in order to install the right driver.
Looking at the specs for the notebook, there are some drivers you need that aren't listed on the page.
For example...Chipset which you need to install first and reboot before installing any other driver.
First download is what you need.
http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx
Second is video. Install and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103171-1&cc=us&dlc=en&lc=en...=
I do not know what audio your model has. There could be one of two audio chips installed Conexant or IDT.
Again, that is why I need the hardware ID's so I can post the drivers you need.
Wired Network:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102406-1&cc=us&dlc=en&lc=en...=
How you want to make a folder for these drivers and run them is up to you.
But we can get this done for your friend.
Paul

XML file not properly read from Appc Server. Partial records filled into IT

Hi,
I am reading an XML file from the application Server. only 2 records are comming to the Internal table. Other records are not coming to the Internal Table. It's giving Sy-Subrc 4 after 2 iterations. Below is my code. Kindly suggest.
open dataset p_unix in text mode message msg.
    if sy-subrc <> 0.
      message i001(38) with 'Error on Open of File: ' msg.
    else.
      while sy-subrc = 0.
        read dataset p_unix into infile.
        check sy-subrc = 0.
        append infile.
      endwhile.
      close dataset p_unix.
Thanks,
Debi.

Hi,
this is probably because there's only one "end of line" character (probably after <?xml ... ?>). This is normal, but you must store the second line in a string data object, which will then receive the whole XML stream (except the xml header as it is stored in the first line). And that's done.
BR
Sandra

Server 2012 R2 RDS Personal Collection -reuse VM names after a partial job failure

I am currently testing RDS on server 2012 R2, and as part of the test I have built and rebuilt multiple collections of VMs. I have noticed that when creating a new JOB to build a personal collection, sometimes I get VM build failures on one host. The build
failures are usually due to a networking issue, which I then resolve, but when I go to add/create the VMs that failed, the name of the VMs increment from the last VM, and they don't re-use the failed names. I want to be able to reuse/build the VMs that
failed.
eg.
VM-01, VM-02, VM-03 - On HOST-01 all work
VM-04, VM-05, VM-06 - On HOST-02 fail
VM-07, VM-08, VM-09 - On HOST-03 all work
So on this example, when I re-run the job to build the missing/failed VMs, it would build VM-10, VM-11, VM-12 on HOST-02.
Is there a way to reset, or reuse the failed VM names, in the example above that would be VM-04, VM-05, and VM-06?
Thanks

Hi,
Thank you for posting in Windows Server Forum.
For a try you can use powershell command for RD VDI infrastructure.
New-RDVirtualDesktopCollection -CollectionName "ITCamp" -PooledManaged -StorageType CentralSmbShareStorage -VirtualDesktopAllocation 5 -VirtualDesktopTemplateHostServer $VHost -VirtualDesktopTemplateName $VDITemplateVM -ConnectionBroker $RDBroker -Domain “contoso.com”
-Force -MaxUserProfileDiskSizeGB 40 -CentralStoragePath”\\fileserver1\NormalVMs” -VirtualDesktopNamePrefix "ITC" -OU “VDICampUsers” -UserProfileDiskPath \\fileserver1\NormalProfiles
More information.
Lab Ops 7 – Setting up a pooled VDI collection in Windows Server 2012 R2
http://blogs.technet.com/b/andrew/archive/2013/10/28/lab-ops-4-windows-8-1-windows-2012r2-vdi.aspx
Also check that when setting up RDS, there needs to be a Physical NIC with IP for the creation of a RDS vSwitch. If this vswitch does not exist, the creation of the MV's will fail.
Hope it helps!
Thanks.
Dharmesh Solanki

Partial Records insertion using DB Adapter - SOA 11g

Hi,
We have a BPEL process in which we are inserting records in a table using DB Adapter. Currently if the input data has any problem of data type miss-match then all the records are rejected. None of the records are inserted in the table. Whole batch is rejected.
We have a new requirement that when there is problem is any record, then only that problematic record is rejected and rest of the records are inserted in the table. Is it possible to do so?
Thanks,
Sanjay

In that case, its better to move the insert statement into procedure and do the insert and return value, if the insert statement is more then this will increase the performance time.
How many rows you will insert at very worst case ? like 100 lines ?
Thanks,
Vijay

Results page only displays partial record

Hello everyone: I am new to this forum and would like to
request some help. I have searched and searched but cannot find the
answer to my problem on this forum or others.
I problem is as follows;
I have a results page which displays the complete version a a
single news story. I am pulling the story with a simple URL
Parameter. The PHP tage for the affected field contains a simple
nl2br statment and I am not using any complicated queries to pull
the data.
When I update the record from the update page I get no errors
of any kind, but when I load the page that displays the updated
record, the contents of the field in question is trucated.
I cannot see any problems with any of the code and I am quite
baffled by it.
Here is the code for the record display
<?php echo nl2br ($row_rsNews['story']); ?>
And this is the code for the update action
<?php
function GetSQLValueString($theValue, $theType,
$theDefinedValue = "", $theNotDefinedValue = "")
$theValue = (!get_magic_quotes_gpc()) ?
addslashes($theValue) : $theValue;
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) .
"'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue :
$theNotDefinedValue;
break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" .
htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_update"])) &&
($_POST["MM_update"] == "updatenews")) {
$updateSQL = sprintf("UPDATE news SET `date`=%s,
subtitle=%s, title=%s, story=%s, image=%s, thumb=%s WHERE id=%s",
GetSQLValueString($_POST['date'], "date"),
GetSQLValueString($_POST['subtitle'], "text"),
GetSQLValueString($_POST['headline'], "text"),
GetSQLValueString($_POST['story'], "text"),
GetSQLValueString($_POST['image'], "text"),
GetSQLValueString($_POST['thumb'], "text"),
GetSQLValueString($_POST['id'], "int"));
mysql_select_db($database_ifbdb, $ifbdb);
$Result1 = mysql_query($updateSQL, $ifbdb) or
die(mysql_error());
$updateGoTo = "news_list.php";
if (isset($_SERVER['QUERY_STRING'])) {
$updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
$updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
$colname_rsNews = "-1";
if (isset($_GET['id'])) {
$colname_rsNews = (get_magic_quotes_gpc()) ? $_GET['id'] :
addslashes($_GET['id']);
mysql_select_db($database_ifbdb, $ifbdb);
$query_rsNews = sprintf("SELECT * FROM news WHERE id = %s",
$colname_rsNews);
$rsNews = mysql_query($query_rsNews, $ifbdb) or
die(mysql_error());
$row_rsNews = mysql_fetch_assoc($rsNews);
$totalRows_rsNews = mysql_num_rows($rsNews);
?>
I would truly appreciate any help this group can
offer.

Hi Gunther:
I am really quite embarrassed, about this but I think I found
the problem...
I had a look at the table configuration in MySQL
Administrator, and there was the problem staring me right in the
face.....
The field 'story' was set to VARCHAR(255) ! I reset it to
TEXT and all is fine now!
Please accept my sincerest thanks for your help. Your
suggestion to check if I was using a textarea is what led me to
check the datatye again. I have no idea how it got changed but I
now know where to check first if it happens again.
Thaks a ton!!!!!

Partial Recording Failure

Similar Messages

Maybe you are looking for