Partial retirement or transfer of current-yr acquis. not possible.

Hi sap guru
My client facing a problem while doing retirement .He created a new asset in asset class 8000 after that he done AIAB that is transfer the assest in to normal assest and than he done AIBU .After that he is trying to do complete  retirement of the normal assest through F-92 or ABAON. The error is coming Partial retirement or transfer of current-yr acquis. not possible.
Pls suggest the solutions how to do the retirement .
Please help me it is on high priority
Regards
Varsha batham

Hi,
Using t-code ABAON:
If this is not a partial retirement, then do not enter information in this tab.
If it is a partial retirement, specify the amount, percentage, or quantity.  Also, make sure the correct radio button is selected to specify the asset as a prior- or current-year acquisition.
Thanks,
Chad

Similar Messages

  • Partial retirement or transfer of prior-yr acquis. not possible

    Partial retirement or transfer of prior-yr acquis. not possible?
    How can I fix it? wht does it mean?
    thanq

    Can you explian in more detail with transactions details etc...

  • Partial retairment or transfer of prior-yr acquis not possible

    Hi
    we purchase 4 assets in one Asset Number in two year back, now we want to sale 2 Asset and remaining two asset continue same, i Tried in f-92 but i got error message  Partial retairment or transfer of prior-yr acquis not possible
    Please give me suggestion
    Regards
    JK

    Please use the percentage rate feild in partial retirment column and
    you should be able to post the retirement

  • Document is in transfer for purchase order.Creation not possible

    Dear All,
    We did partial confirmation in EBP and later when trying to do confiramtion for the remaining quantiy getting the message"document is in transfer for purchase order.Creation not possible"
    We are taking this problem in production as well as in quality systems also.
    What are possible reason and how to solve it.
    kindly share your views.
    Thank you.

    Hi yshu,
    use tcode bd87 in SRM to check for failed confirmation IDOC (type MBGMCR).
    The double click the status record to see the exact cause of the failure.
    Rectify the error. Then try to execute the IDOC from BD87 tcode.
    For a few errors you may not be able to execute the IDOC but to create a new confirmation in SRM. In such cases, follow the below procedure..
    There should be an entry for the confirmation in the transfer table BBP_DOCUMENT_TAB in SRM. Display the details.
    Then run FM "BBP_DELETE_FROM_DOCUMENT_TAB" to delete the entry from the doc tab table.
    Then post a new confirmation in SRM.
    There is also a FM in SRM using which you can change the status of thefailed IDOC from 51 to 68 or 31.
    Rgds,
    MJ

  • Batch to batch transfer of same material is not possible

    We are doing batch to batch transfer of same material no. through MB1B in a plant which is depot. This is not happening and error message is coming "Batch to batch transfer of same material is not possible" msg no. 00398.
    We tried the same transaction in mfg. plant and it is allowing the batch to batch transfer of same material no.
    Full marks for earliest best solution.

    Choubey Ji
    Normally when you want to do stock transfer and change the  batch of a material  then we use M Type 309 via MB1B...in your case..you are doing this within a single plant...which i don't think is possible.
    Correct me if i am wrong.
    Regards,
    N

  • Document in transfer for purchase order - creation not possible

    Hi Experts,
    we get this error when we do confirmation"'document in transfer for purchase order - creation not possible'"
    any inputs are appreciated
    Rg
    sam

    Hi All,
    We have resolved the above problem.
    When user does confirmation ,if it sucessfully  created then there will be  no entry in BBP_Document_tab table.If it's in error in process and next time when user tries to do GR then he will encounter a pop up message "Document in transfer for PO, creation not possible".
    So we need to delete the entries from table BBP_DOCUMENT_TAB using FM BBP_DELETE_FROM_DOCUMENT_TAB.
    Then check again in BBP_DOCUMENT_TAB now there will be noentry there...so now user can do the confirmation from SRM,he will not encounter this error now.
    Thanks to all the ppl who has replied
    sameer

  • Partial Retirement for Asset

    I have an Asset with Asset number 1000, and this asset has inventory number of 31000, which has to items in this inventory number, ie: 31001 and 31002.
    I want to have partial retirement for this asset, ie: I want to sell item 31001 only.
    What are Tcode or ways that I can use?
    Thanks in advance.

    Hello
    Choose Posting ® Retirement ® Retirement with revenue ® No customer
    Enter the asset.
    Check the date specifications, and make any necessary entries on the Transaction data tab page. If you do not enter an asset value date, the system automatically determines this date when you save.
    Enter the revenue in the Specifications for revenue group box. Enter the:
    Revenue amount
    Depreciation area, from which the net book value should be used as the revenue amount
    Enter additional posting information (such as document type) and the transaction type on the Additional details tab page.
    In addition, you can also enter costs here that arose from the retirement. However, these costs are posted only as asset line items. However, there is no integration of this posting with cost accounting or the general ledger.
    If you do not enter a transaction type, the system automatically determines one when you save.
    To post a partial transfer, enter a posting amount, a percentage or a quantity on the Partial transfer tab page. Specify whether the retirement applies to prior-year acquisitions or to current-year acquisitions.
    The system determines the appropriate transaction type automatically.
    If you do not make any entries on this tab page, the system carries out a complete transfer.
    Enter a text for the posting document on the Note tab page.
    Save.
    Using this transaction, it is not possible to:
    Manually enter different amounts for different depreciation areas
    Have the system propose depreciation areas for certain transaction types
    If you need to use one of these functions, then use transaction ABAO.
    Reg
    *assign points if useful

  • Partial Retirement Error

    Hi,
    Asset Partial Retirement Transactions were posted to 3 Assets in the FY 2006, which was affected only in FI. Retirement values were not deducted from the APC & Depreciation was being changed on the value of APC without deducting the retirement value.
    Example:
    APC at 2006 FY start is Rs.68110. Partial Retirement was posted on 01.04.2006 with Rs.54,488.00 & APC should become Rs.13622.00 at year end. But still it is showing as Rs.68110.00 ( but retirement amount Rs. 54488 is posted to Asset GL) & same is carry forwarded to Current FY.  
    how can i adjust the APC value in Asset Master only for the Current Fiscal Year.
    Regards,
    Shekar.

    Hi Shekar,
    A lot of this depends on the accounting implications.
    You could use transaction ABSO, transaction type 105, to reduce the cost of the asset.
    Thanks,
    Tammy

  • Posting of retirement/transfer not possible (error in the asset)

    Dear All,
    I have been trying to retire 3 assets by ABAVN. After I try to simulate the posting, it says:
    Posting of retirement/transfer not possible (error in the asset)
    Message No.465
    Diagnosis
    An inconsistency was found for the asset 10 during the last recalculate values.
    Posting was rejected,
    Choose the function recalculate values in the master data maintanance transaction, and remove any inconsistencies.
    My question is that what is the asset 10..is it the depreciation area? C's I haven't input 10 assets...only 3.
    What is the recalculate values for asset master data maintanance? Is it the depreciation or other input to the asset master?
    Thank you.
    Emma

    Hi,
    I checked AFAR and found it would re-valuate 2 assets in 1999 and 2000 for depreciation area 10 (which is the tax depreciation). In 1999, the assets are retired partially. I am checking on the values AFAR calculated and find what happened that made it necessary to re-valuate the assets.
    Thank you.
    Emma

  • Group Asset Partial Retirement

    Dear All,
       I am using Group Assets and I would like to partially retire an asset attached to the group asset. The issue is that SAP is making a positive adjustment on the current year depreciation, and only this year's depreciation is incorrect. All the following years depreciate correctly, according to the newly calculated NBV. Does anyone know if there's something in Customizing that I can adjust or will my users have to manually re-adjust this?
    Thank you!
    Regards,
    E.

    Hi Sharif,
    I think system is correctly posting to loss/gain account to the externt sales value and net book value difference. It should not go to asset logically, don't you think so? Why do you think it should go to asset?
    I hope this clarifies your doubts.
    Thanks!!!
    Murlidhar Khatri

  • Post partial retirement using ABAVN

    Hi All,
    We configured one transaction type for Partial Retirement.Details of depreciation area allowed are as follows:
    Depr. area 01, display for selection, always post
    Depr. area 32, display for selection
    When we are doing partial retirement using ABAVN,the system is not allowoing us to post it.The error displayed is :
    Transaction Type has depreciation area limitation,although posting is not mandatoryin all of the depreciation areas entered.However,it is not possible to select depreciation areas in the current transaction.
    Please suggest on this.
    Regards,
    Payal Saxena

    Hi Paul,
    ABAV is not allowed for users.
    We require to use ABAVN  only.
    Regards,
    Payal Saxena

  • Partial retirement by quantity in assets

    Hi
    I would like to know how the system calculates the values if we retire assets partially by quantity. the asset has current and prior year acquisitions
    please let me knwo the calculation procedure
    Thanks in advance
    Anand

    Hi,
    Acquire Quantity = 10 (2010) X 100 = 1000
    Partial Retire =  4 (2011)
    Dep for 2010 = 10% X 12 = 120
    Current 10 Quantity Value =  880
    Now you Retaire Q u201C4u201D here system calculate Total Amount / Total Quantity X Retired Q  (800/10X4= 320)
    Regards
    Viswa

  • How can i transfer my current itunes library to my new 3GS?

    Hey;
    i would be grateful if anyone could help me transfer my current itunes library synced with my 1st gen Touch to my new (ordered) 16gb 3GS?
    this probably seems like a stupid question but i am hardly an itunes expert!
    thank-you...

    If you don't switch your computer, just connect your phone and sync with itunes like you did with your old iphone. Your music, apps and other media content should be present in itunes.
    If you bought some media using your phone, transfer your purchases before. Right click on your phone in the device list and choose transfer purchases.

  • Partial retirement in fixed assets

    Hi,
    we are having one strange fixed asset problem.. today we have processed all the fixed assets transactions from january to may
    2000.. we did a partial retirement of an asset in dec 2001.. like we had 4 units of it and we retired 1 becaz it was stolen..
    the transaction worked in december everywhere (like in fixed assets, general ledger)..now in 2002 this transaction is there
    in fixed assets but not showing in General ledger so our fixed asset is not matching with general ledger.. so can someone
    suggest that where we did the mistake??? any help will be highly appreciated..please let me know if i'm not clear enough
    becaz i'm new to oracle finance...
    Thanks.
    Sandeep

    Hi Experts,
    can anyone help me how can i identify what account i should be set-up in Account Determination of Fixed Asset
    (Administration> Set-up> Fixed Asset> G/L Account Determination):
    i am using SAP BUSINESS ONE 2007 A (8.00.181) SP:00 PL:47
    1) Retirement: Net Method
    a.) Sales Revenue for Asset Sales Net
    b.) Asset Retirement with Exp. Net
    c.) Revenue for Asset Retirement Net
    2) Retirement: Gross Method
    a.) Leave with Expense Net Book Value
    b.) Leave with Revenue Net Book Value
    I can not run the Retirement of Assets because this part was not been set-up
    and Please do sent me also the copy of PDF to my e-mail.. thanks..

  • What is the best way to transfer photos currently in Shutterfly into iPhoto?

    Hi!
    What is the best way (as far as highest quality and most efficient) to transfer photos currently in Shutterfly into iPhoto?  Do I need Shutterfly to make CDs of all of my current photos?
    Thanks for any help!!

    How to make the best quality Sutterfly copies is a good question for ShutterFly support - eithere download the pohotos or get the CD depending on what ShutterFly support suggests and then import to iPhoto
    iPhoto simply takes the quality you provide and makes an exact copy of it
    LN

Maybe you are looking for

  • Bad Performance with Oracle Lite 4.0.1

    I have a table in Oracle Lite with 17000 records and 110 fields. A SELECT on this table needs 1 minute to finish. The same table and query only needs 1 second on Oracle 8i Server. MSDE also needs 1 second. All the relevant fields are indexed. Are the

  • CRMXIF_ORDER_SAVE IDOC not getting generated for BUS_TRANS_MSG BDOC

    Hello Experts, In our project, we have a requirement to send custom fields in the BUS_TRANS_MSG to external system through XIF. The model of BDOC BUS_TRANS_MSG triggering IDOC CRMXIF_ORDER_SAVE_M02 perfectly worked in the development system. We wante

  • XD02 transaction to change the customer data for updating KNA1 table?

    Hi all, How can we use XD02 transaction to change the customer data for updating KNA1 table? Give the steps. Thanks in advance rk

  • Concurrent manager not working

    Hi all I have just been assigned to work on an environment that was just installed by someone else . The problem is that when I submit a new request to the concurrent manager it stops in the phase "inactive" and the message in the status is " No mana

  • OSS Problem

    I recently re-installed Arch Linux with OSS instead of ALSA because I had problems with ALSA. OSS seems to detect everything fine, and osstest outputs sound through my speakers and headphones. The problem is that I can't get any other app to play sou