Partial reversal of ARE-1 certificate

Dear All,
Can anybody tell me, if it is possible to reverse an ARE-1 Certificate partially but not for the entire document.
Rgds,

Dear,
In what business senario you want to do partial reversal. I think you want to do quantity to quantitiy amemndment in that case
If the customs officer noted a shortfall in the quantity of goods, the excise clerk entersthe shortfall as well. Since the where abouts of the missing goods cannot beaccounted for, they no longer qualify for exemption from excise duty. Your company
is therefore liable for the excise duty on the shortfall, plus interest, backdated to the date when you removed the goods from your premises. The clerk specifies which excise registers to pay the excise duty from.
Regards
RKS

Similar Messages

  • Partial reversal of a goods receipt from process order

    Dear All
    Could anyone please help me with explaining how to do a partial reversal of a goods receipt from process order? If Iu2019m using trans CORS I have to cancel the entire operation, which I donu2019t want to do. If Iu2019m using MIGO and MT 102 I only reverse the goods receipts of the produced material, the corresponding components from the BoM is not reversed with MT 262 as they are if I cancel with CORS, and I donu2019t want to do a second MIGO transaction in which I cancel the components with MT 261. I have also tried to create an operation with a negative quantity, but without any success.
    Itu2019s not an option for the business to reverse the entire quantity and then perform a new goods receipt with the right quantity.

    Hi again,
    I have been trying to do the reversal with CORR but Iu2019m getting the error message u201CMixed confirmation types (time ticket/time event) are not allowedu201D, message number RU179.
    Anyone who can help me on the way?
    /WM consultant on unknown territory

  • Partial Reversal of Reservation components

    Dear Experts,
    Can anybody give us way out for following scenario.
    Scenario:
    01. Transfer posting done against reservation having say 10 components ( A, B, C, D, E, F, G, H, I & J ).
    02. Consider each Item has Qty 10 PCs
    Requirement:
    01. Partial Reversal of components for B = 2 PCs & G = 5 PC against the same reservation.
    02. We want to do the above reversal in background.
    Can anybody suggest the BAPI or anything which will help us.
    Thanking you in anticipation
    Aniruddha

    Hi again,
    I have been trying to do the reversal with CORR but Iu2019m getting the error message u201CMixed confirmation types (time ticket/time event) are not allowedu201D, message number RU179.
    Anyone who can help me on the way?
    /WM consultant on unknown territory

  • Partial reversal in STO

    hii all,
    plz let me know, how i can do partial reversal in STO.
    M using CIN, here, i have taken 10 items under STO Process and Delivery , Excise calculation , everything has over.
    now, i want to return 2 Items to Supplying plant. can u tell me how i can do it.

    Hi There
    Reversal of partial is not possible ,
    But you can use the Mov Type 557 and 558  to do the adjustments in Stock in transit qty
    Few more details on STO adjustments
    Hi There
    it can be settle in many ways,,,
    1. Receive the goods as 100 and Scrap the 5 nos from the received plant,,- If the receiving plant is responsible
    2.Revert the PGI/Transfer movement and send the 95 nos again from the supplying plant- of the Supplying plant is responsible,
    3.Also we have the movement type 557 and 558 without doing the above two steps you can correct the qty from stock in transit itself,,
    4. also you can check the below similar thread
    STO - material lost during tranfer from plant A to plant B
    5. Here is some more details
    557 Issue from stock in transit (adjustment posting)
    Only use this movement type (also the reversal movement type) under the following circumstances:
    Using movement type 557, you can correct purchase-order-independent stock in transit if
    - a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit according to the purchase order history
    - stock in transit still exists, even though there are no open stock transfer orders for the particular material
    This movement type may ONLY be used in the cases mentioned above after careful analysis, to correct stock in transit that has rounding errors.
    This movement type may not be copied.
    Note!
    Before using this movement type, note the following:
    - 392205 Analysis stock in transit / Correction if split valuation
    Possible special stock indicators:
    E, Q
    You can use any one of the way to solve the issue, Hope it helps
    Cheers
    Senthil P

  • Reversal documents are not being represented when 0PY_PP_C3 is being loade

    We use the 0HR_PY_PP_2 and 0HR_PY_PP_1 infosources to load the 0PY_PP_C2 and 0PY_PP_C1 ODSs. Then 0PY_PP_C1 updates the 0PY_PP_C3 ODS.
    Routines in the update rules include corresponding data from 0PY_PP_C2 during the update of 0PY_PP_C3. If there is no matching data in 2, then the corresponding records in 1 do not go into 3 Our process chain first loads 2, after it activates, it then loads 1, then updates 3.
    There are 5 reversal documents are in 0PY_PP_C2.
    The Update rules between 0PY_PP_C1 and 0PY_PP_C3 refer to the Posting Documents ODS: 0PY_PP_C2. 
    The issue is that the reversal documents are not being represented when 0PY_PP_C3 is being loaded.

    Hi,
    The simple solution is to debug the code written in the routine, as you mentioned that you already have some data in PP_C2 then check if that data is properly getting read in routine.
    After that check the condition based on which you are skipping records of PP_C1 and not loading into PP_C3. Is your condition perfectly working fine?
    Put a break point and check how the data is flowing.
    Regards,
    Durgesh.

  • Reversed documents are not cleared

    Hello there
    I am dealing with support to customer who has following issue (among others..):
    - the settings are made so that standard SAP reversing procedure is messed up! Namely, when the user reverse FI document the SAP creates new one (reversal document) but the original and reverse documents are not cleared against each other! It is also very hard to find out the connection between these two documents.
    I have no idea where to look to check why this is happening.
    I checked the reversal reasons, and all are set to 'negative postings', but I do not believe this is just because of that!
    They have SAP ECC 5.0 version KERNEL 640
    Best regards,
    Amina
    Edited by: Amina Bisic on Feb 28, 2008 9:39 AM

    Hi
    When any transaction is cleared with another transaction either it may be customer or vendors, the first line item will become closed status.
    When you want to reverse the transaction you have to reset and reverse the transaction.
    I mean when you reset it becomes open item then you can reverse the transaction.
    Otherwise in your case it is only creating  a seperate lieme item
    Thx

  • Partial reversal of statistical posting

    Hi,
    I am using statistical posting (F-38) for posting Letter of Credit  (LC) into books of accounts. Now when LC is disbursed, part disbursement takes place over the period. So i have to reverse the LC created in part. I tried F-19 (reversal of statistical posting). But by using F-19, i am unable to reverse the document in part amount. Let me know how it can be done ?

    Hi Deepak,
    Partial reversal is not possible.
    Regards,
    Kiran

  • Partial Reversal or Clearace of Bill Liability in F-20

    Dear Team,
    We have new scenario & realised one bill but partly.We want to reverse
    the same in F-20 & thing is that how we can make partial reversal of
    the bill liablity because bill not realised completely.When we selected
    reference bill in F-20 but there is no option for reversing the partial
    part ..Please let me know that SAP has any such feature which we can do
    in screen of F-20..
    Thanks & Regards,
    Dharmveer

    Dear Ravilla,
    The document type used in F-20 is assigned to business transaction
    0200 + variant 0001 -> Revesal bill laib. Normally the customer invoice
    doesn't include an entry which is assigned to item category 04000 =
    Cash. Because of this assumption, the business transaction 0200 doesn't
    allow item category 04000 by system default and it is not possible to
    change this limitation.
    The workaround for this is to create a new transaction variant for
    business transaction 0000 (unspecified posting), define the splitting
    rule for the new combination, and then link this combination to the
    document type. I'd also recommend to create a new document type for
    this particular type of posting.
    Mauri

  • Fixed Assets Config - Trans type to partially reverse a previous retirement

    Hi experts,
    Is it possible to create a transaction type to partially reverse a prevous retirement?  When trying to create/define a new retirement transaction type I am unable to specify a balance type, as it appears a retirement always defaults to a credit balance.  I also tried setting up an acquisition transaction type, as this allows me to specify a debit/credit transaction assignment; however, I can not set it to belong to the retirement transaction type group.  I also tried creating an acquisition trans. type that belongs to the acquisition trans. type group and set it a debit assignment, and retirement for both the consolidation trans. type and asst hist sheet grp.  This transaction allowed me to debit the asset to reverse a previous retirement, but the transation display on the asset acquisitions report and not the asset retirement report.  We need this partial reverse retirement transaction to display on the retirement reports for tax reporting purposes.
    Our business users need this transaction type as they will retire assets in month 1, and then in month 2 recieve additional data that reveals the retirement in month 1 was too much, so they want to partially reverse the month 1 retirement in month 2 (so leave the original retirement transaction in place in month 1).  Is this possible?
    Thanks in advance for you assistance.

    Go to AB08 and enter company code/asset and select the month 1 retirement document and reverse
    And post a new retirement in month 2.
    After month end depreciation all values will be adjusted in GL accounts as well
    Srinivas

  • MIRO partial reversal

    Hi,
    Please suggest me whether partial MIRO reversal possible for planned delivery cost
    Regards,
    Balu

    Hi,
    As your requirement is to partially reverse the delivery cost, try subsequent credit funtion.
    Thanks,
    Uswin

  • Why we are using certificate in infopath?

    Hi All,
    why we are using certificate in infopath?
    Thanks in advance!

    Hello,
    + Jamie
    Also to provide security and trust your publisher. If there is no certificates with form then you might face problem with publish popup. To verify all publishers for your template, just open any infopath form-->select options from file menu-->then
    click trust center-->trust center settings. You should see all certificates which are allowed.
    http://msdn.microsoft.com/en-us/library/office/bb251022%28v=office.12%29.aspx
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Partial reverse of mov 313

    Hello!
    Can I do one partial reverse of movement 313?
    Best regards

    Hi,
    You canoot cancel partially this movement.
    What you can do is to create an opposite movement from the receiving storage location (e.g. original movement: from SLoc1000 to SLoc 2000; opposite mov. from SLoc2000 to SLoc1000).
    Regards,
    csaba

  • Partially reversal miro

    hii..
    we want to reverse the miro doc..
    by mr8m we can do it complete but not partially..
    tell me for partially reversal..
    Thanks & Regards
    Rekha  sharma

    Hi
    Alternatively you can issue Credit memo for the partial amount instead of reversing and reentering the same.
    Regards,
    Lakshmanan Krishnan

  • Partial reversal of Intra company STO

    Hi Gurus,
                 How to reverse partial quantity in the intracompany STO with delivery.
                    After make GR  we reverse the partial qty  by using mvt type 122. Then the stock will be SIT of the receving plant. How to reverse that qty in to supplying plant's stock. If we use the VF09 it reverse the whole qty.
    Pls clarify.

    Hi,
    the system behaviour is correct. With 122 you are only sending the material back from your receiving plant but the stock has not reached or been received in the supplying plant. Unlike 351, movement type 122 is not meant for stock transfer. If you see the material document you will only see one line, unlike 351 which will have a - from supplying plant & a + to the receiving plant,which is the reason why the stock goes into SIT of the receiving plant in the 1st instance.
    BR

  • Reverse proxy server CMS certificate verification

    Hi,
    Is there a way to instruct the reverse proxy server (3.6 SP7) not to verify the CMS server certificate?
    What we are trying to do is, setup a test CMS server with self signed certs installed on it, but don't want to install the CA cert for the same (above self signed cert) on the reverse proxy server.
    thnx,
    Alok

    Sorry, but it's not very clear.
    The CA cert for the self signed cert ???

Maybe you are looking for