Partial Slideshow Failure

I am using iPhoto 4.0.3. I recently upgrade in iTunes 6.0.1 and Quicktime 7.0.3. I now find that slideshow works with some songs from iTunes and freezes using other songs. I cannot find a common denominator between which ones work and which ones fail. Has this hapened to anyone else and what have you done to fix. I already repaired my permissions and deleted and replaced the iPhoto preference file. Thanks.

Hi:
This is the link to the support and driver page for the notebook:
http://h10025.www1.hp.com/ewfrf/wc/product?product=5189529&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
Like I said, I need the hardware ID's. For example, note the list of wireless network adapters.
You need to know the hardware ID's in order to install the right driver.
Looking at the specs for the notebook, there are some drivers you need that aren't listed on the page.
For example...Chipset which you need to install first and reboot before installing any other driver.
First download is what you need.
http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx
Second is video. Install and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103171-1&cc=us&dlc=en&lc=en...=
I do not know what audio your model has. There could be one of two audio chips installed Conexant or IDT.
Again, that is why I need the hardware ID's so I can post the drivers you need.
Wired Network:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102406-1&cc=us&dlc=en&lc=en...=
How you want to make a folder for these drivers and run them is up to you.
But we can get this done for your friend.
Paul

Similar Messages

Prime Infrastructure 2.0: Inventory Collection - Partial Collection Failure on 2 of 4 VSS WS-C6509-E

Hello,
I've got a strange behaviour regarding the inventory collection for 2 of 4 virtual switching systems.
That means the inventory collection for two VSS is succesfull (inventory collections status = Completed) for the other two systems it is not, see attachments.
The device credentials like SNMP-RW, SSH acces are OK. I've already tried to increase SNMP timout and retries as well as telnet/ssh timout without success
All 4 systems are identical regarding hardware model and software vesion.
HW: WS-C6509-E
SW: 12.2(33)SXJ3
Any ideas or suggestions?
Best regards,
Bastian

TAC and I found a bug, CSCum05301.
May be that is also helpfull for others.
https://tools.cisco.com/bugsearch/bug/CSCum05301/
Symptom:
Inventory collection will fail if following keywords are used as part on description command on the interface config level of IOS device: 1Gbps, 10Mbps etc.
Following error message is visible on the DWC:
Inventory Collection Status: Partial Collection Failure
Collection Status Failed feature(s)
Unable to configure DSL, Serial, POS, Ethernet, Loopback, Virtual-Interface, Tunnel, Vlan, Switchport and Service Module interfaces on ISR, ASR and Switches.
Conditions:
Speed keywords like 1Gbps, 10Mbps etc. available as part of descrption command in IOS interface level.
For example:
interface FastEthernet0/3
description 10Mbps
Workaround:
Use a space character between number and unit keyword, like 1 Gbps.

How to design a grid to withstand a partial network failure

Hi,
We are evaluating Coherence for a mission-critical system where we want to test partial network failure scenario. We want to run 4 physical hosts, 8 JVMs with 2 JVM on each host. The evaluation criteria is to connect 2 machines on either side of a router, kill one side during a load test, thereby disconnecting the 2 machines and run with the remaining two. In order to have a fail-safe behavior in this scenario, I guess we must ascertain that the back-ups for the objects on one side of a router are always made on the other side. Can Coherence detect such a network set up and store backups accordingly? Or is there a way to configure this by overriding the default behavior?
Pls advise
Thanks,
Sairam

Hi Sairam
If you use scenario 1) then your test will work. As this scenario only has two machines then the primary node for a piece of data will be on one machine and Coherence will make sure the backup is on the other machine. If you then break the link between the machines or lose a machine you will not have lost data.
If however you have more than 2 machines then you break the link between them you have what is known as a split-brain - which means you have effectively split your cluster in two. Both sides only know they they can no longer see the other part of the cluster and assume they are must be the remaining working part. In this case though you will have lost data from the cluster as some of the backups for each part of the cluster will be on the other part. There is nothing you can do about this, you cannot control which machines backups are allocated to.
Increasing the backup count to 3 does not give you any more reliance than having a backup count of 2. As far as I know Coherence only guarantees that the placement of the first backup is on another machine.
I am not quite sure what you are trying to test as a Coherence cluster cannot automatically survive a network failure that splits the cluster. There are things in 3.6 that you might be able to do with Quorums to mitigate the damage while you recover and there are things you can do to make recovery easier - but you will have to recover lost data.
JK

Prime Infrastructure 2.1 ASA5580- Security Context Partial Collection Failure

I am attempting to add my ASAs into prime but get stuck almost instantly after adding the new device. Prime is able to get the device name and Device type (Cisco ASA-5580 Adaptive Security Appliance Security Context) Admin status shows up as Managed but Inventory Collection Status shows up as "Partial Collection Failure" For more detail it says "feature_image_firewall Unexpected error. See the log file inventory.log for details."
The only failure in inventory.log I could find was
[2014-09-26 12:40:01,868] [ICE Service[ 1]Thread: 20] [inventory] [ERROR] - 192.168.0.19 For device id: 2848866 Feature = feature_image_firewall and Procedure = ImageFireWal failed in time 45 with the following error and continuing with other features: com.cisco.nm.expression.function.FunctionException: <palError><deviceId>2848866</deviceId><code>HANDLER_ERROR</code><message>Error while trying to run handler. Action : imageFireWall, Handler : com.cisco.nm.pal.customhandler.RPLHandler. Error : Exception thrown : Constraint violation. See log for details.</message><handlerCode>ERROR_HANDLER_ERROR</handlerCode></palError>
[2014-09-26 12:40:01,868] [ICE Service[ 1]Thread: 20] [ice] [ERROR] - com.cisco.nm.expression.function.FunctionException: <palError><deviceId>2848866</deviceId><code>HANDLER_ERROR</code><message>Error while trying to run handler. Action : imageFireWall, Handler : com.cisco.nm.pal.customhandler.RPLHandler. Error : Exception thrown : Constraint violation. See log for details.</message><handlerCode>ERROR_HANDLER_ERROR</handlerCode></palError>
com.cisco.nm.expression.function.FunctionException: <palError><deviceId>2848866</deviceId><code>HANDLER_ERROR</code><message>Error while trying to run handler. Action : imageFireWall, Handler : com.cisco.nm.pal.customhandler.RPLHandler. Error : Exception thrown : Constraint violation. See log for details.</message><handlerCode>ERROR_HANDLER_ERROR</handlerCode></palError>
As far as the ASA config goes:
snmp-server enable
snmp-server host management 192.168.10.27 community c!$c0PR!me version 2c
logging enable
logging history 7
snmp-server enable traps
The above config works on our ASA5520s except I still haven't set up the traps right because there isn't any useful information on those devices so I am not sure what I need to change?

My ASA is using DH 1.
For 9.2(1) I read this in the release notes.
Note The ASA 5510, ASA 5520, ASA 5540, ASA 5550, and ASA 5580 are not supported in this release or later. ASA Version 9.1 was the final release for these models.

Partial collection Failure for nexus 5548UP in PI 2.1

Hi there,
I get "Partial Collection Failure" in the inventory collection status in Prime Infrastructure for all my Nexus 5548UP (8 devices).
i have seen in the PI 2.1 release notes that a bug CSCum16230 which look like my problem has been resolved in PI 2.1 but i continue getting the "partail collection failure"
Would like to know if the bug is still exist or get any other help to solve this problem.
Regards,
Alon.

hello
I have this problem as well...
we've got four N5K-C5548UP. Two with a layer 3 daughter card and two without.
interestingly we see the issue just on those boxes with the l3 daughter cards N55-D160L3-V2 installed...
Any help or ideas are highly appreciated
regards
roman
Sh inventory:
OK:
device-a# sh module
Mod Ports Module-Type Model Status
1 32 O2 32X10GE/Modular Universal Pla N5K-C5548UP-SUP active *
3 0 O2 Non L3 Daughter Card N55-DL2 ok
Mod Sw Hw World-Wide-Name(s) (WWN)
1 5.1(3)N2(1c) 1.0 --
3 5.1(3)N2(1c) 1.0 --
NOT OK:
device-b# sh modu
Mod Ports Module-Type Model Status
1 32 O2 32X10GE/Modular Universal Pla N5K-C5548UP-SUP active *
3 0 O2 Daughter Card with L3 ASIC N55-D160L3-V2 ok
Mod Sw Hw World-Wide-Name(s) (WWN)
1 5.1(3)N2(1c) 1.0 --
3 5.1(3)N2(1c) 1.0 --

Cisco Prime 2.1- Partial collection failure

Dear Experts,
We are seeing many devices (around 1000+ devices) showing as "partial collection failure". We found this coz of not updated Telnet/SSH Cli username and password. So instead of editing each and every device, is there any way to select all devices and update cli credentials in one shot..?
If someone helps me this option, it will be so helpful.

Hi ,
Other way is to export all the devices , Edit it and then Import it.
Operate >device workcenter > EXPORT device \ BULK IMPORT
Thanks-
Afroz
****Ratings Encourages Contributors ****

Import Error (Partial Set failure with RC error code = 0x84020020 for rec

Hi,
While importing the data through xls file , i am getting the error message "Partial Set failure with RC error code = <0x84020020> for record number
0 through 212" and no record get created in Data manager.
Although i mapped all values , still it giving me an error message.
I tried to Import other data and it was all working fine.
Please guide
Regards
Sandeep Kumar

HI,
I checked the exl file and found that in the first column and first data was in text format ('0001)but later on when i change the record and moved it to the last record , it worked fine. I was able to load all records including ('0001)
I don't know wht the logic behind this:
if my first record was ('0001), system was giving me the error and not allowing me to load the data. But when i moved the record as the last record it not only allow me to load the records but allow ('0001) also.
If anyone have any clue , plz let me know.
Regards
Sandeep

Partial recovery failure

I am repairing a hp laptop DV7 for a friend, I have the recovery dvd's and drivers dvd
but all I get is a message that the recovery has a partial failure. I can never
get the system restored to factory settings.
I loaded windows 7 64bit pro easily, but I could not get the drivers
loaded because the nic card driver could not be loaded.
What is wrong with this proceedure I thought it was supposed to be
simple? change the boot order to make the dvd drive first
and install the dvds in order.. What is missing from this picture in getting
this DV7 laptop working?
Thanks.

Hi:
This is the link to the support and driver page for the notebook:
http://h10025.www1.hp.com/ewfrf/wc/product?product=5189529&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
Like I said, I need the hardware ID's. For example, note the list of wireless network adapters.
You need to know the hardware ID's in order to install the right driver.
Looking at the specs for the notebook, there are some drivers you need that aren't listed on the page.
For example...Chipset which you need to install first and reboot before installing any other driver.
First download is what you need.
http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx
Second is video. Install and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103171-1&cc=us&dlc=en&lc=en...=
I do not know what audio your model has. There could be one of two audio chips installed Conexant or IDT.
Again, that is why I need the hardware ID's so I can post the drivers you need.
Wired Network:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102406-1&cc=us&dlc=en&lc=en...=
How you want to make a folder for these drivers and run them is up to you.
But we can get this done for your friend.
Paul

Server 2012 R2 RDS Personal Collection -reuse VM names after a partial job failure

I am currently testing RDS on server 2012 R2, and as part of the test I have built and rebuilt multiple collections of VMs. I have noticed that when creating a new JOB to build a personal collection, sometimes I get VM build failures on one host. The build
failures are usually due to a networking issue, which I then resolve, but when I go to add/create the VMs that failed, the name of the VMs increment from the last VM, and they don't re-use the failed names. I want to be able to reuse/build the VMs that
failed.
eg.
VM-01, VM-02, VM-03 - On HOST-01 all work
VM-04, VM-05, VM-06 - On HOST-02 fail
VM-07, VM-08, VM-09 - On HOST-03 all work
So on this example, when I re-run the job to build the missing/failed VMs, it would build VM-10, VM-11, VM-12 on HOST-02.
Is there a way to reset, or reuse the failed VM names, in the example above that would be VM-04, VM-05, and VM-06?
Thanks

Hi,
Thank you for posting in Windows Server Forum.
For a try you can use powershell command for RD VDI infrastructure.
New-RDVirtualDesktopCollection -CollectionName "ITCamp" -PooledManaged -StorageType CentralSmbShareStorage -VirtualDesktopAllocation 5 -VirtualDesktopTemplateHostServer $VHost -VirtualDesktopTemplateName $VDITemplateVM -ConnectionBroker $RDBroker -Domain “contoso.com”
-Force -MaxUserProfileDiskSizeGB 40 -CentralStoragePath”\\fileserver1\NormalVMs” -VirtualDesktopNamePrefix "ITC" -OU “VDICampUsers” -UserProfileDiskPath \\fileserver1\NormalProfiles
More information.
Lab Ops 7 – Setting up a pooled VDI collection in Windows Server 2012 R2
http://blogs.technet.com/b/andrew/archive/2013/10/28/lab-ops-4-windows-8-1-windows-2012r2-vdi.aspx
Also check that when setting up RDS, there needs to be a Physical NIC with IP for the creation of a RDS vSwitch. If this vswitch does not exist, the creation of the MV's will fail.
Hope it helps!
Thanks.
Dharmesh Solanki

Slideshow Failure

I'm on a Mac G5, Leopard, 2.5 GIGS ram, LR2 working with RAW files. I have a 65 image slideshow, edited in LR and one in PS3. I have music. The first time I ran through the slideshow, it made it all the way to the end with no problem. Subsequent times, after making modifications to many images, it would stop going thru to the end. Most of the time, not even half way through. Music would play, but it would return to the beginning slide. I shut down, rebooted, and ran the s.s. again. Same result. Music goes on, but the slides do not. What do I need to do, and where do I need to look? Thanks in advance!

I have this same problem as above. It has happened when showing clients their portraits. Very embarrasing to the point that I am looking for another way to show a slide show of images. It has happened in all previous versions of Lightroom and has not seemed to be fixed yet. I will try 2.1 and see if that helps. I have tried the rendering 1:1 fix and it still did it, although not as often. This "fix" takes forever too do as well. It has usually happened after I have swithched the orders of the slideshow images. This seems to be what triggers it. Hopefully it gets fixed. Any other solutions?

Partial sync failure

Certain Music tracks fail to sync. They show a partial download symbols and there it gets stuck.

I have the same issue with the nightly and aurora versions. Firefox 11 works fine.

Partial Recording Failure

Is there any way of establishing whether a recording has worked fully? I startd to watch something last night and after 5 minutes the recording stopped. There were no indicators on the menu screen to indicate a recording failure.
Solved!
Go to Solution.

Thanks. Perhaps I just missed that. I guess it's worth checking each time a programme has been recorded, especially if you aren't going to get around to watching it for a while - dependning on what it is, there's always the catch-up route as a backup.

Partial sound failure, need help

Tecra A9-S9015X running Windows XP SP3
After an unexplained system crash when I unplugged the AC converter at the wall, all sounds failed (system, CD, DVD, mp3). After I updated the BIOS from the origianl vers. 1.1 to 2.0, system sounds returned loud and clear (Windows welcome, Notepad cannot find search string). But still no sounds from music CD, movie DVD, desktop mp3 file, though they seem to play normally (all in Windows Media Player 11).
Here's what I tried, in order:
MicroSoft FixIt tool, Mats_Run.AudioPlayback.exe
Restore BIOS to default settings
Update BIOS to latest version (non-AMT version; system sounds restored)
Re-install new download of latest audio driver 5.10.0.5404 (after uninstall)
Re-install new download of Toshiba Mic Effect Utility (after uninstall)
Re-install new download of Media Player 11, after uninstall (roll-back to vers. 10)
I'm puzzled and need new ideas! Thanks for your consideration.
Solved!
Go to Solution.

This is embarrassing! There is a separate volume control in Windows Media Player that somehow got turned to zero (icon near the bottom; I never use it). And it stayed zero in the new installation of Windows MP. All is well now.

Partial carriage failure on an Envy100e

I have a 5 year old Envy 100e printer, which does not allow me to change the cartridges.
Lifting the lid does not activate the movement of the cartridges to the centre of the carriage, where the empty cartridges can be replaced.
However the cartridge holder moves freely when given printing instructions, so clearly it is capable of moving and is not jammed completely.
There are no error messages on the screen, and I am reluctant to try and force the carriage from the right hand side resting position.
I would welcome any helpful suggestions, as to how I can fix this problem.

Hi @winter02 ,
I see that you are unable to change the cartridges, the carriage isn't moving out to the middle. I can help you.
Make sure the printer is connected directly to a wall outlet.(If the printer doesn't receive adequate power to reliably move the carriage motor, it could show as a carriage jam)
Turn the printer off and disconnect the power.
Try to gently move the carriage out to the middle..
Check and remove any loose paper or objects that might be restricting the carriage.
Close the cartridge access door.
Reconnect the power cord and turn on the printer.
Check to see if the carriage will now move out properly.
I have provided a document with some steps to try to see if that will resolve the issue.
A 'Carriage Jam' Message Displays for HP ENVY 100 (D410) and ENVY 110 (D411) e-All-in-One Printer Se...
Please call our technical support if the issue persists, at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
Contact HP.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Lightbox under slideshow failure

Hy, im working with this lightbox, and in the last updates of muse, they star to fail, when i put the page online the pictures in lightbox appear by a half of the picture, or not appear at all, can you help me fixing this problem?

Hello,
Could you please check if it works fine when you preview it in a browser from Muse by clicking on File>Preview page in browser.
If it works fine in preview then please try File>Export as HTML option and export your website to a location on your computer nad please check if it works fine there or not.
In case it is not working properly while previewing in browser, Please create a new test website using Muse and let us know if it works in that website or not.
Could you please provide us a link to your website as well so that we can have a look at the issue?
Regards,
Sachin

Partial Slideshow Failure

Similar Messages

Maybe you are looking for