Partial Transfer Order Confirmation on Picking Process

We are on the picking process with a delivery and a tranfer order. Movement type MM/WM 601.
We have a transfer order item line for 10 units.
We would like to confirm 7 units against one handling unit and the other 3 units against a different handling unit.
We are using RF transaction pick&pack LM46.
The problem is that we don´t know how to split the line item in 2 different items within the transfer order.
We don´t want to confirm the TO with differences and create a new TO for the remaining 3 units. We don´t want either to confirm the TO using LT12 because the process has to be done trough standard SAP RF.
Could anyone help, please?

hi kumar
If you feel this answer suits your query.  Please reward with points.
Transfer order confirmation based on shippingpoint
answer:  no the transfer creation not at all based on shipping points.
The transfer confirmation you have to in lt12 transcton with teh rransfer order number. creation of transfer you can do in lt03 transaction with reference to the delivery frrom you will get transfer order number after that you have to confirm,  so please work on that,
I hope this answer solve your query.
Thanks & Regards
Rack29

Similar Messages

  • Create Transfer Order for Consingment Pick up

    Hey, is there anyone know how to create transfer order for consignment pick up.
    I had tried it using LT06 by using GR material document but it didnt work.
    Please i need the answer rather sooner than later.
    Thanks

    Hello,
    Customer consignment pick is from customer consignment stock back to plant stock.. First of all check in MMBE whether stock exists for that material under customer consignment stock. You can check this in MMBE.
    Your stock should be maintained  in customer consignment and not in interim storage type.
    Ideally your process shall flow like this
    Sales order (KA-Consignment Pick up with item category as KAN & schedule line category: F0 & F1)>>Enter the order reason, material and quantity in sales orde & Save It>>Create Outbound delivery (VL10B/VL01N)>>Now Create Tranfer order to move the stock from consignment to warehouse stock>>Go to VL02N Choose from menu  Subsequent Functions u2013 Create Transfer Order & Enter>>Add Storage bin if required>>Confirm the transfer order (LT12)>>Do the Post Goods Reciept (VL02N)
    Now Check Consignment stock quantity with MB58 Add Material , Plant , Customer Execute
    BR,
    Tushar

  • 2-step transfer order confirmation radio frequency (RF) transaction

    Could you please tell me if there is a RF-(mobile) transaction available for a 2-step transfer order confirmation?
    Similar to LT1B / LT1C to confirm the "pick"- and "transfer"-step seperatly.
    Thank you in advance!

    In my opinion, there are no std. RF t-codes similar to LT1B/LT1C. Ref: http://wiki.sdn.sap.com/wiki/display/ERPLO/RadioFrequency(RF)Tcodes
    However, this link: http://help.sap.com/saphelp_sm40/helpdata/en/af/c466412ea98447e10000000a1550b0/content.htm says for a putaway process: When RF devices are in use in a warehouse, it is common to confirm TOs in two steps. This means that the worker confirms the first step of the TO at the source bin, and confirms the final step of the TO at the destination bin.
    Hope this helps.

  • Automatic goods issue for outbound delivery, during the transfer order confirmation

    Hello,
    Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
    Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
    Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
    Thanks in advance.

    Hi Iiya
    Check the below setting, might be helpful

  • WM-deactvate transfer order confirmation

    Hi
        i need to de activate the transfer order. while i creating the transfer order it appeared two check box (confirmation), left check
       box not activated but second check  box activated . so i need to deactivated the transfer order confirmation.
    i used the (F4) that check box is for
    Indicator: confirmation
    If this field is selected, the transfer order with all its items has been confirmed.
    Use
    This indicator is automatically set by the system as soon as the last transfer order item has been confirmed.
    Withe Regards
    dinesh

    Hi friend
                Already i deactivated in TCode OMLJ. I create the TO  using  Tcode LT04.....
    PLS HELP ME TO DEACTIVATE
    WITH REAGRDS
    DINESH

  • Transfer Order Confirmation

    Hi,
    When confirming transfer order, what is the significance of confirming internally.  It doesn't ask any pick qty.
    Moreover, my client asked me to check if any TO confirmation is done for short quantity, the idoc should trigger the error message where the user would manually edit and update the qty.
    But, while confirming TO, it didn't allow me to specify any pick qty.
    Please help me on this regard.
    Regards,
    B.Anandh

    hi,
      IF it says taht there are no open TO, then def it will fail,
    check out if according to ur requirement, where the material or bin or SU has that aprticular TO open, check out these transactions for open TO)'s
    LT23 for a give TO
    LT24 for a given material
    check out if teh TO is alreayd confirmed or canceld in LT12 if teh above transactiosn does'nt help
    Theja.

  • Avoid automatic Transfer Order confirmation when created.

    Hi Gurus,
    When creating the Transfer Order, it automatically gets confirmed. How can we separate the TO creation and confirmation? Where are the switches? So we can either confirmed the TO in LT12 or by using interface.
    Any help is really appreciated.
    Many Thanks

    hi Jyoti,
    Thanks for the input. I checked in OMLX and it looks like our Warehouse is not listed for the Separate confirmation of pick and transfer to set up two step confirmation.
    But when I try to set this up, system pop up an error saying 'An entry already exists with the same key' whereas this entry is not maintained.
    Can you please elt me know what needs to be doen.
    Many Thanks

  • Transfer Order Confirmation not updated in Header level (Table: LTAK)

    Hi,
        We are facing a problem, transfer order header is not updated with confirmation, but TO items are confirmed and resulting these transfer order to display in RF monitor (LRF1 and LRF2 transactions).
    And the other issue is, we are seeing some transfer orders created without item data (in LTAP table) and unable to confirm these TOs since Item data is not available, hence TO header is not updated with confirmation and resulting these TOs to display in LRF1 and LRF2 report.
    I have cleared some transfer orders by updating the confirmation field in LTAK table through debugging. But we see the issue is ongoing and would like to have permanent solution.
    It will be a great help if anyone have solution to these issues.
    Thanks & Regards,
    Nagarjun

    Hi Nagarjun,
    do you have any Z code in-between ?  Did you check OSS notes ?  Did you apply all patches to your system ?
    What you are describing is something usual when Z programs were developed, you should provide more details for analysis.
    Many thanks,
    Enrico

  • Warehouse Management - Transfer Order Confirmation

    Hi,
    When a Transfer Order is Confirmed is the transaction code that was used stored in the SAP System? We use LT11, LT12, and on RF Scanners LM03 and LM05. We have been asked to report which one of these was used in a particular scenario.
    Thank you,
    Mike

    Thank you. This is what I suspected. We currently do report on dates and times and the users, however, we were asked if the transaction codes could be added.
    Thanks once again,
    Mike

  • Urgent -  Transfer Order Confirmation Error- Item category Type Not defined

    Hi Gurus
    i need your help for an <b>urgent production issue</b>
    FYI we have full fledged Wm implemented
    the users are not able to confirm the TO's created and it shows an error that <b>ITEM CATEGORY NOT DEFINED, </b>
    i have checked in the STO in me23n which has many different materials in it and it is all having item category = U and also delivery is generated and it also has some item category defined in it also
    so can you please help me why this is happening and not able to confirm the Transfer orders
    thanks in advance for any help
    regards

    Chakri
    Could you solve the problem. If so could you tell us what the solution.
    Thanks
    Aju Paul

  • Transfer Order Splitting By Picking Area

    Hi,
    Appreciate some help on this one.
    Our system is currently set to split picking transfer orders by storage type -       I'm trying to switch this off.
    Instead I would like to split by picking area, so if I have say, picking area 001 across 2 storage types, I would like a pick that goes across these 2 storage types to be created on ONE TO.
    I have tried various combinations of sorting and splitting but so far no luck.
    It seems that the 'Split Picking Area' check box  in     Define Profile > Profile for Transfer Order Splitting    actually refers to the storage type.
    If this option is checked, I get 2 TOs, even though my picking area is the same across the 2 storage types I am testing.
    If this option is unchecked, I get one TO, even if I set the picking areas to be different.  It is almost like the picking area has no influence.
    I read something about 'Forced' splitting  -     I wonder if there is an option to uncheck 'Split Picking Area'   and then set my sorting in a such a way that I get my desired split??
    Any hints or tips gratefully received.
    Thanks
    Guy

    Hi,
    "Instead I would like to split by picking area, so if I have say, picking area 001 across 2 storage types, I would like a pick that goes across these 2 storage types to be created on ONE TO."
    I would think that you do not have one picking area across 2 storage types. You define picking areas per storage type. So if you give them the same name, that does not mean that they are the same picking areas. So the effect you describe is a split per storage type because they have different picking areas.
    Best regards
    Juergen

  • Transfer Order Confirmation error

    Hai all,
        WHen I am trying to confirm the transfer order it is showing the error
    'Enter storage unit'
    and does not allow to confirm the transfer order. what may be the problem?.
    Kindly help me to resolve this.
    Thanks in advance,
    S.Jenibalet.

    Hi
    There seems to be a lot of information for you to take in but let me try to simplify it.
    In the strategies in the config you can specify which storage unit types can go in to which storage type and which bin types can go in to which storage uniy type etc.
    If (and I am sure that you have) you have SUT check ticked in the config of your storage type then everytime you want to place stock in to this storage type the system will check the SUT and if required will ask you for it.
    There are two ways round this.
    1. Take off the SUT check in the appropriate st types if you do not need it and this issue goes away.
    2. Ensure that all of your strategies in OMM1 are set and that you have the LE QTY, UOM and SUT set up in the WM2 view in the material master. If you do this the system will know the SUT and will default it in for you.
    I hope that this makes things clearer. Whilst I appreciate all of the replies you have had if you do not do one of these two things it will continue to happen.
    Regards

  • Stock transfer order confirmation

    Hi gurús,
                       There is a transaction for confirm N numbers of OT? Its mean, a massive way to confirm an stock transfer order.
    Thanks in advance for the help
    Regards
    Enzo

    Hi,Yes you can do that with transaction LL01. But you need some customizing in order to decide when a transfer order not confirmed must appear in that report. And you need also to run program  RLLL01SE in order to refresh the list of TO unconfirmed. Rgds, Philippe

  • Exit for transfer order confirmation

    Hi ,
    I need an EXIT to extract the orginal transfer order number and its details once it was confirmed .
    if anybody knows the exit related to it provide me the same ,
    as it is veryurgent
    thanks

    Hi ,
    I need an EXIT to extract the orginal transfer order number and its details once it was confirmed .
    if anybody knows the exit related to it provide me the same ,
    as it is veryurgent
    thanks

  • Partial Sales Order Confirmation from BAPI.

    Hi,
    I have B2C process to create order from internet. Right now we are able to create order but problem is if it confirms parital today and partialy in future then it confirm all in future.
    e.g. - I have to create order for 10 quantity.
    - from VA01 if i try to create
                        it will confirm for 4 for today(as 4 quantity available) and 6 for future(say 3/11/10)
    but for the same case in BAPI
    - it will create order for 10 as future confirm (3/11/10)
    Is there any flag i need to set in BAPI.
    I use BAPI - BAPI_SALESORDER_CREATEFROMDAT2

    I already seen that but I think in that we have to use : BAPI_MATERIAL_AVAILABILITY  and it will add time for the creation of order.
    Please let me know is there any other option.

Maybe you are looking for