Partially blank pages in IE7 and IE8

OS = XP 32 bit
Browser = IE7
Flash version = 10.1.102.64
I was getting partially blank pages in IE8. I unistalled it and installed IE7 and I got the same results. I unistalled flash player and reinstalled I still have the same issue. I get no error messages when I installed flash but it doesn't appear to be working.

I had several other issues that were resloved once I ran the "secedit" command. I didn't bring these other issues up since I didn't think they were realated. The other issues were: I couln't open WMP, and I couldn't open " Help and Support". I also tried to put IE8 back on my computer but the installed failed. Once I ran the "scedit" command and registered the listed dll's, ALL of my isues were resolved. No more blank web pages, I was able to open WMP and Help and Support, and I was able to upgrade to IE8.
Also before running the "scedit" command I got error messages when I tried to register the dll's that I mentioned. The dll's weren't missing, they just weren't registered.
Uninstall and reinstall did nothing for me. Niether did the vs 9 method.
Thanks for all your help. I hope the resolution I found can help others too.

Similar Messages

Jsp error Message: Access is denied. on customers IE7 and IE8

Hello,
Here is a thing:
Customer getting js error in IE7 and IE8. Firefox works fine.
I am not able to reproduce on internal machine with ie8. also internally all works in ie9 (also in browsing modes ie7, ie8). and of course firefox works great internally as well.
Error happens when they navigate back to caller page from popup page (SelectPG) by selecting not partial action. When they click on the commandImageLink popupPage get blanked (get white with no any information on it) and stays and IE showing yellow exlamation mark in the bottom left corner with error:
Message: Access is denied.
Line: 1
Char: 53
Code: 0
URI: http://cusomer_host:7001/product/faces/selectFlow/SelectPG?_adf.ctrl-state=1paop64rm_38
SelectPG is inside bounded taskflow which is ran as dialog from caller taskflow.Popup page SelectPG opens fiine and all information is displayed correctly, they can see table with all information do filtering on table etc...
i dont have access to customer enviroment. and i am not able to reproduce this on any of our internal enviroments.
kind of stuck here will appreciate any thoughts/hints/suggestions.
thanks in advance!

and it seems that to reproduce this - you can run any of your application which have taskflow's <inline-popup> with this kind of link:
a href="http://weblogic:7101/yourproduce/faces/yourPage.jspx" target="_blank">go to your application </A
for some reason target="_blank" makes popup not to be closed throwing the Access is denied error.
Do you know if there is any patch for this? (updating jdev version is not the option)
Edited by: user1175340 on Oct 4, 2012 8:03 AM

SeamlessTabbing broken in IE7 and IE8

I have a Flash movie in an html page and need seamless tabbing to work as the page has to be 508 compliant (so you need to be able to use the tab key to navigate)...In IE7 and IE8 you can tab through fine once, but if you continue the tab the second time around the flash movie gets ignored. At first I thought it was me, but I found two samples online that were deemed to be functioning in a correct tab looping...and they do the same behavior...work fine once and the second time around the Flash content is ignored!!! I have found nothing addressing this...anywhere.... (BTW I have things running fine in FireFox...that was an easy fix)...but I have to target both IE and Firefox...
Here are the samples that are deemed to be correctly functioning tab looping (seamless tabbing)...however they are not in IE7 and 8
seamless tabbing sample 1
seamless tabbing sample 2
Any help to ressolve this would be appreciated...I just can't get focus back within the Flash movie...

Agree totally with TexasApexDeveloper here. Trying to find a way to get older versions of IE to render HTML5 content is not a reasonable solution and will be a constant uphill battle.
You mentioned that your users use IE <9 on XP systems. Is IE the only browser installed on user workstations? Could Firefox be an option?
R/,
Keith Malay

TS1368 when i try to access the itunes store to buy music, it loads at the top and says connecting to itunes store..then it loads all the way and goes to a blank page. it loads and seems like it is will work, but then goes to a blank page. Why is it doing

when i try to access the itunes store to buy music, it loads at the top and says connecting to itunes store..then it loads all the way and goes to a blank page. it loads and seems like it is will work, but then goes to a blank page. Why is it doing this?

Hello katyhale,
I found a couple of articles that might help with the issue you are experiencing with the iTunes Store.
If you are getting a white screen when accessing the iTunes Store and using a Windows computer, I recommend reviewing this article:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
If you are still not able to access the store, I recommend the following article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
Best,
Sheila M.

Zooming animation is extremely slow in IE7 and IE8

Hi,
version: OracleAS MapViewer Version: Ver1033p5_B080908
zooming effect is extremely slow in IE7 and IE8 (FF, Safari, Chrome do it fast!)
thanks,
Branislav

I believe you can blame IE's incredibly slow JavaScript engine for this. That's my experience. There's not much the Mapviewer developers can do about that really.
I had hoped, that IE8 had improved on that, but there hasn't really been any visible differences.
Jacob

Ie7 and ie8, again shocks :(

yes, flowplayer is great tool, we are using it and its free version. cheers, but if u see http://apps.facebook.com/kickasskaraoke/most_liked.php in ie7 and ie8, click on video thumb and click on share or invite button, the video comes over the facebook window. i know the issue is diff If you get time let me know what is the solution for it. thnx in advance

Thanks Arun.
We are using 11.1.1.2.0.
We do not see any javascript error. If needed, I can provide few screenshots. You help is much appreciated.

Code to play a swf on ie7 and ie8 instead of poster

What is the code for using a swf instead of the poster.png for ie7 and ie8?
Thanks,
Rodrigo

It's a limitation; only one computer can be authorized for any given rental. If desired, click here and ask the iTunes Store staff for assistance.
(123580)

Printing results in fully/partially blank pages

I'm developing a Java application that generates printed output, and am having trouble with pages intermittently being printed partially or completely blank. The pages contain mostly a mixture of text and line graphics, and sometimes bitmap images such as a company logo. Sometimes just a logo is missing from a page, sometimes the whole bottom half of a page is missing, and at other times an entire page is printed blank.
The problem usually occurs with longer multi-page documents, but can also happen with fairly short documents. It doesn't matter if a multi-page report is generated as a single print job, or if each page is generated as a separate job.
The problem varies with workstation/OS/printer combinations. Some combinations always work reliably, while others exhibit the problem frequently. In one case, a workstation running Windows XP exhibits the problem when printing to an HP LaserJet connected locally via either USB or parallel cable, but the same workstation prints fine when a network-attached HP Laserjet is used. However, another workstation running Windows 2000 has problems printing to the same network-attached printer.
My application uses JRE 1.3, and I've tried various maintenance releases as they became available, hoping one of them would solve the problem. I'm currently using JRE 1.3.1_11. I've also tried running my application under the latest JRE 1.4 release, and it worked no better.
I've seen other reports of similar problems over the years, but most of them are old, as are the related bug reports that I've been able to find (which all seem to be closed).
I use RReport to generate the reports I'm trying to print, which is put out by Java4Less (www.java4less.com). The FAQ on their site hints that others have encountered the same problems I am, but their solution is to make sure to use the latest JRE release, which is scary since that doesn't solve the problem. I have the source code to RReport, which I have examined quite thoroughly. While it's not pretty code and has some obvious issues, I can't find anything to suggest that it could cause the kind of problems I'm seeing, especially so inconsistently.
Is it possible that there is some fundamental flaw in the JRE's printing code that has slipped by unconfirmed to this day? Or has the emphasis on J2EE and web apps. allowed this issue to be swept under the rug?
Kevin Rahe

I did finally find an open bug, # 4527394, that appears to address this issue. I found a solution for the printer that is currently giving me headaches, which is an HP LaserJet 2300d. I turned off the "Enable advanced printing features" setting on the printer's Advanced Properties, and the problem went away. Other applications, such as Adobe Acrobat, are able to print similar documents to the same printer reliably even if "Enable advanced printing features" is enabled, however, so this is really just a workaround, and indicates that Sun's JVM has some fundamental problems in its printing facilities, at least on the Windows platform.
Kevin Rahe
KRAHE InfoSystems, Inc.

Blank page on browser and no error message on WL console

When Weblogic starts, everything seems ok, but after severial minutes running,
while browser requesting a web page, it stops on a blank page, and the Weblogic
console does not shows any error message, then, Weblogic will never response,
until restarted. What's wrong with it?
we use Weblogic 6.1, system based on structs and ejb

I'd suggest taking a thread dump of the server and posting it here.
-- Rob
muziq wrote:
When Weblogic starts, everything seems ok, but after severial minutes running,
while browser requesting a web page, it stops on a blank page, and the Weblogic
console does not shows any error message, then, Weblogic will never response,
until restarted. What's wrong with it?
we use Weblogic 6.1, system based on structs and ejb

Adobe Interactive forms & WebDynpro for java problem with IE7 and IE8

I have Interactive form ui-element in WebDynpro for java (ver. 7 SP 10) application. It works fine with IE6, but in IE7 (or IE8) it doesn't show that ui-element at all. We have tried to change IE7 security & advanced settings, but we have not made any progress. We have also tried to install/uninstall different Adobe reader versions etc.

I know a little more about the problem now. After viewing the XML source I change the property of the inputfield.
It was like this:
<field name="verdipers_felt" y="130.7001mm" x="180.1801mm" w="101.6004mm" h="44.4501mm" locale="no_NO" access="ReadOnly">
but i changed the access to be nonInteractive
<field name="verdipers_felt" y="130.7001mm" x="180.1801mm" w="101.6004mm" h="44.4501mm" locale="no_NO" access="nonInteractive">
now view2 shows the linebreak as in view1... Buut! when im going back to view1 from view2, the linebreaks gets converted into spaces
thats pretty wierd, aint it?

Web printing on ie7 and ie8

I have sucessfully installed HP web printing software on my laptop (xp) running Internet E 7 and it works fine.
On my desktop I am running Internet E 8 and XP, the file extracts and when it atempts to install a Graphic of a CD flashes on the screen and it never installs.
Anyone else haaving problems with IE8

I was having the same problem locating the program until I clicked the little >> at the right of the toolbar on Explorer and then I see "Show or Hide HP Smart Web Printing" When I click this to show HP Smart Web Printing, I get the panel on the left for smart web printing, but it is blank...I no longer have the clip...print buttons. So, I solved one problem only to get another. I even uninstalled HP Smart Web Printing and reinstalled...same result.

UPK player issues in IE7 and IE8

Hi,
I'm getting different results on four different computers when I launch our UPK 11.1 player in IE8 and IE7. One machine running IE8 runs just fine, but another running also IE8 launches the the UPK player with a very small frame height in the righthand pane (where the playback modes are) that's truncating the content. Another machine running IE7 has a similar issue. I've tried a number of workarounds, but I haven't had any luck so far. Safari, Firefox and IE9 seem to work fine. Has anyone experienced something similar with UPK 11.1 playback in different IE browsers? Any idea what the cause might be?
Thanks.
Rich

Hi Rich,
To add to your solution:
Holding the <CTRL> key and using your wheel on a wheel mouse provides the ability to zoom in / out on your browser (when rotated forwards and backwards). You must ensure that your browser has mouse focus in order to do this.
Regards,
Greig
Edited by: Greig on Sep 12, 2012 8:25 AM

Spry Data Sets and IE7 and IE8

Whiile in IE 7 or IE 8, my spry data set is not displaying
the data. However, using the Firefox browser, you can see the data
within the spry data set. For some reason unbeknownst to me, IE 7
and IE 8 in not allowing the spry data set to display the necessary
data. Is there a fix to this issue? Can changing or modifying the
HTML code help make the connection between the spry data set and
its data in IE 7 and IE 8? Any assistance would be helpful. Thank
you.
To view my site where the problem is at, go to
http://www.hrconsortium.net/hrworkshops.htm

It gags in IE because you are saying that the Course_Date
column is a date, but you have an "Open" word in the date column
instead of a date. You can work around the problem by creating a
custom column that replaces the "Open" keyword with a date in the
past or the future, depending on where you want it to land when
sorting (top or bottom). Then, leave your Course_Date column as a
"string" column type, and set the new custom column to the date
column type. Try something like this:
<script type="text/javascript">

</script>
--== Kin ==--

How can I keep the favicons in the bookmark toolbar from resetting to blank pages after closing and restarting Firefox?

I only use favicons in the toolbar -- no text. In this version the favicons reset. In an older version of Firefox that I never updated, the favicons always stayed put and never changed.

You can try to keep some items. I don't know which you would need to keep. Firefox won't reload favicons in [[Private Browsing]] mode, so you won't get them back once the favicons are gone.
See also CheckPlaces: https://addons.mozilla.org/firefox/addon/10897

Is there a way to open Firefox and have your persona the enitre background when your home is set to a blank page instead of just a blank white page

The background normally as you know on a blank page is white and your persona is visible only at the top section of the window; im curious to know if you can change this to where your persona is visible on the entire window instead of just the top section.

Personas seems to me to be a let down. What good is a thin strip of picture at the top of the page? Disappointing.

Partially blank pages in IE7 and IE8

Similar Messages

Maybe you are looking for