Partially serviced planned orders identification -reg

Hi ,
we would like to develop an abap programme to delete or adjust order quantity and withdrawal quantity in the partially serviced planned orders  as these could not be deleted in our REM scenario.
for this is there any key to identify the partially serviced planned orders ?
let me know the field and table
i searched in PLAF , i could not get
programme is required as this unserviced quantity of partially serviced planned orders adds to the demand while system is running MRP
is this correct ?
pro

Try using strategy 11
Giri

Similar Messages

  • Partial conversion of planned order for AFS material

    Hi,
    I cant able to convert partially the planned order in to production order for the AFS material. Has any one has faced this problem? Is there is anything i need to do in IMG?
    Regards / US

    Hi,
    Which version of AFS you are working only AFS 6.03 has given with this facility.  Pl check if it is AFS 6.00 you have update the patch level.
    Regards
    Mohan

  • Partial conversion of Planned orders to Production orders

    Hi all
    I wan tot partially convert planned order to production order. I am able to do this with MD04. Is there a tcode for mass partial conversion. CO41 does not allow a partial conversion. Is there a way I can collectively do a partial conversion.
    thanks

    Hi John,
    To the best of my knowledge there is no t-code to do a mass partial conversion of planned orders.
    You can try with a lsmw recording of t-code co48 & then input your planned order numbers with the qty to be partially converted or alternatively use co41, change the qty & convert the planned orders, but with this you will need to re-run MRP to create another planned order for the balance qty.
    Hope the above helps.
    Regards,
    Vivek

  • Service Plan

    Hi Experts
                               we are working on service contract with service plan item.we are creating service plans for every three months.At the time of creating service contract with Plan item start of interval is showing creation of contract date.Once i  save the contract start of interval changing to 400+ years(ex-2010 to 2452).Due to this it is creating nearly 1800 service orders insted of four(ex-yrs 442 X 4).we are using standard date profile and standard item category(SPLA) only.what could be the reason for changing start of interval. Please help us on this issue.
    Regards
    Sreedhar
    Please anyone suggest reason for this issue

    Hi,
    Try using standard service plan order type with std date profile and check if the same problem exists.
    I think there might some problem in date profile.
    Regards,
    PP

  • MRP Planned order generation for Order reservation excluding Dependent Requirements

    In our Project we have a requirement like for FG stage & SFG1 stage are M.T.O So after sales order are punched through  MD50 we have created Planned orders against sales orders,But dependent stages like SFG2 & SFG3 which are pure M.T.S so only Dependent requirements will get generated.Suppose for SFG1 i have partially converted planned order to Production order then for component SFG2 we get Partial Quantity as order reservation.Now requirement is if i run MRP for SFG2 system need to generate demand only for order reservation excluding Dependent requirements.Is there any possibility where we can generate demand only for order reservation.As system will create Planned order for SFG2=Dependent requirement + Order reservation

    Hi Uli,
    Suppose i have Sales order--100 kgs for FG
    B.O.M levels
    1.FG-----M.T.O
    2.SFG1---M.T.O
    3.SFG2---M.T.S
    4.SFG3---M.T.S
    5.ROH
    So if i run MRP via MD50 system would generate planned orders for FG & SFG1 level as they are M.T.O specific
    Now my requirement list would be
    FG-100kg planned order
    SFG1-100kg planned order
    SFG2-100kg dependent requirement.
    Now suppose i have partially converted SFG1 planned order to production order
    SFG1--100kg planned order to 30 kg production order
    Now my requirement list would be
    FG-100kg planned order
    SFG1-70kg planned order & 30 kg production order
    SFG2-70kg dependent requirement & 30kg order reservation.
    Here my requirement is if i run MRP for SFG2 in MD02 as these stage is M.T.S system should provide 30 kg planned order & if we see down the line it would be like
    Now my requirement list would be
    FG-100kg planned order
    SFG1-70kg planned order & 30 kg production order
    SFG2-30kg planned order & 70kg dependent requirement.
    SFG3-30kg planned order
    ROH-30kg Purchase req
    Client requirement is like these..

  • How to delete planned orders with partial quantities -reg.

    Dear Friends,
    the issue is
    we are not able to delete the old planned orders in MD16 for which partial quantities are existing.
    we require to delete these planned orders which are partially serviced to avoid creation of schedule lines  for excess quantities.
    Is there any way to delete the planned orders for which partial quantities are existing ?
    is there need to change any strategy to make MRP not to consider these planned orders with partial quantities for MRP run ?
    thanks
    Madhu Kiran.

    Hi Madhu,
    Are you getting any error message from MD16? if yes then please send us the messsage number with class. if you do not want that MRP to consider the planned orders then change the startegy 11 for these parts with mixed MRP indicator 1.
    try this deletion from MD12 also..planned order change mode. Let us know the fresh update.
    Regards
    TAJUDDIN

  • Auto creation of service orders from service plans using action management

    Hi,
    We are using service plan products in service contracts where in serviceorders are created according to the plans for the duration of the contracts according to the defined frequency.
    The processing for the action is set as "Immediate processing" so that the order is created the moment the deadline is reached. The order is created using the method "CREATE_ORDER_SRVPLAN".
    The contract is created and released and with all the line items (including the service plan line items). The schedule condition is such that => all the orders due in a particular month are created on the first of that month. e.g. plan orders for 15.01.2009, 30.01.2009, etc (i.e.,all the orders due in Jan 2008) will be created on the 01st of Jan 2008.
    As per this definition, the relevant actions get scheduled, BUT DO NOT GET EXECUTED. The moment I just go to the edit mode in the document and save (without making any changes) the action gets executed and the service order gets created.
    The requirement is that the moment the deadline is reached the action should get executed and there should be no need to edit the contract since the processing is kept as immediate.
    Please advice further.
    Warm regards,
    DP

    Hi Cenk/Pepe,
    Thanks a lot for the response.
    I did schedule the report and it gets executed as per the schedule. But it does not execute the actions. As a output it just logs "3 actions selected". What I want is that it should actually go ahead and execute these actions and not just select them.
    Kindly advice on the same.
    Regards,
    DP

  • Creation of Service Order from Service Plan

    Hi Experts,
    I am working on sap crm 5.0 version
    Pls help in the service order creation from service plan  document
    I have Created a service plan product and maintained a service plan template with an interval of 3months
    In Service Plan to service order action  i am using the Standard method call
    CREATE_ORDER_SRVPLAN in the action profile and Action profile Start Condtion 
    Start of interval equal to todays date . when i am executing the action
    First service order is getting created immediately on the serviceplan Creation date.
    Subsequent service orders are getting generated respectively as per defined frequency .
    So I am getting one extra service order . how to restrict the additional service order creation and
    order creation to happen as per template frequency
    Regards,
    Prajit.P

    Hi vishant,
    thanks for ur quick reply.
    I am not able to find the scheduling type as u mentioned for changing the planning start date in template.   I am using the standard date profile SERVPLAN in my  service plan action profile
    Please suggest me the daterule i need to select in the date type start of interval  in my date profile
    Regards,
    Prajit.P

  • Partial conversion of planned order into production order of AFS material

    Dear Experts,
    I am working with SAP 6.0 EHP4 with AFS add-on. My material is AFS specific material. I am not able to convert planned order into production order partially from MD04 screen as all the fields in the CO48 screen is grayed out. 
    Please help...
    Regards,
    Alok Tiwari

    Hi,
    I am not able to get what is passing the start date.
    Second thing is how you are generating the serial number - manually or automatic?
    If you are generating serial number automatic, then it is not possible to generate it considering the basic start date.
    But if you are entering the serial number manually, then there should not be any problem as system will accept that serial number which you enter at the time of conversion of planned order to production order.
    Regards
    Amit parkhi

  • BAPI or FM to create Prod. Orders from partial planned order (like CO48)

    Hello everyone.
        I need create a Prod. Order from a planned order, but only converting this one partially, as in tx co48. Do you know any Bapi o FM or I only have the Call transaction option???
    Thanks a lot.

    IMH wrote:
    Hello everyone.
    >  
    >     I need create a Prod. Order from a planned order, but only converting this one partially, as in tx co48. Do you know any Bapi o FM or I only have the Call transaction option???
    >
    >
    > Thanks a lot.
    I don't think we have many BAPI's in the PP module. I guess recording is the option.

  • Partial Planned Order Conversion

    Hi
    I am converting planned orders that are generated from MRP into purchase requisitions.
    Sometimes, I convert partial quantities from the planned orders into purchase requiistions.
    Curently, the planned order with the unconverted quantity is getting firmed. This makes my changes to the material master ineefective.
    I would like the planned order with the remaining quantity to be unfirmed.
    Pl. let me know how to go about doing it.
    Rewards Awaiting!!!
    Regards
    MM seeker

    When you are converting Planned Order into Purchase requisiton. (MD14 or thru MD04)
    After execution, On the screen enter the partial quantity which  you want to convert to P.Req and hit Enter.
    On the "Planned Order Data" block, You will see Firming checkbox for "Planned order" which was greyed out earlier is now enabled to be changed. Just uncheck it and Save. and your problem is solved.
    *Note - There are two firming indicators in the conversion transaction, one for p.req firming and another for Plnd order firming. But Planned order firming is only enabled when you enter partial quantity to convert.
    Thanks,
    Shekhar Ramineni

  • How to use partial number of PPMs to generate SNP planned order

    Hi all,
    I have a requirement for SNP where I have got X number of identical work centers, on which an SKU can be manufactured. Now there are limitations at the operational level on the labour force or any other constraints, due to which only Y number of work centers can be operational on any day (X>Y). So effectively an SKU can use only Y number of PPMs out of X PPMs in the system on any particular day. X and Y are fixed.
    I have tried to map the same by creating a bucket resource with bucket capacity Y and attached to all X PPMs and taken SNP optimizer run. It restricts the output quantity of the planned order by that of the bucket resource defined.
    Is there a way to map this requirement, i.e. restricting the number of PPMs which the SKU can use on any day?
    regards,
    biplab

    Hi,
    You can try this by defining the down time for the particular resource in APO under downtime tab page.
    Ex for a entire week.
    I tried by locking the resource for the entire week and also removed the Maximum delay specified in the product master in our case.
    Took the opt run and system is not suggesting the plans.
    Or
    You can make the PPM inactive before your run.
    Request you to test and confirm this
    Thanks,
    nandha
    Edited by: S.Nandakumar on Oct 4, 2010 9:34 AM
    Edited by: S.Nandakumar on Oct 4, 2010 9:38 AM

  • Missing part for planned order-reg

    Hi,
    I want to see missing parts list against planned orders. I checked through MDVP but it shows all components as missing parts eventhough stock is available.
    Is there any way to see this.
    Regards
    Karthik

    Dear Karthikeyan,
    In general Availability check is done at production order level and rarely in REM scenario's this check is
    carried out at planned order level.
    Because planned order's are a proposal,which may/may not be converted into a production order.
    At planned order level you carry out an ATP check and its based on the checking group,checking
    rule,and the scope of check.
    So check the config settings in OPJJ particularly for the scope of check.
    Here the check box -->check without RLT plays a vital role.
    once after carrying out ATP,the system shows the committed quantity,say if the order is for 100 and
    suppose if the raw materials are available only for making 20 means then after making ATP check in the
    planned order header you can see an additonal field called commited quantity below the order quantity.
    Check in MD12 for an individual planned order and it works based on the availability check value
    assigned in the material master.
    Regards
    Mangalraj.S

  • For a target based production creation of Number of planned orders reg

    For a target based production, can anybody explain as to how the planned orders created/altered. The main question is the system generated planned orders can be altered, suppose the system generates 10 planned orders can we alter to 8 planned orders if so how?

    Vachanala,
    The way I understood "Target Based" production is that it is an MTS scenario and the Material is assigned with Planning strategy 11 in MRP3 view.
    For this you need to PIR(Target) using transaction MD61 with requuirement type "BSF". Once this is done, you can run MRP using MD02 if for single material or run in background using MDBT transaction. Planned orders are created based on the target(PIR).
    You can manually change the planned order dates or quantity in the change mode of the planned order, and system firms this planned order.
    Hope this information helps...
    Regards,
    Prasobh

  • Reg. Component list of planned order

    Hi All,
    My requirement is i need a simple components list of planned order similar to COOIS - Component list, but not with all information.
    Only I need the list of components planned order wise with component number, quantity, Sloc, Header material number, Production line and Production start and end dates.
    To achieve this I am going for Z report development, I found the BAPI-BAPI_PLANNEDORDER_GET_DETAIL has all information what I need.My question is does this BAPI is fetching the values of component from the reservation table against that planned order number.Meaning does this BAPI output of Components and RESB output for that planned order will be same?
    Regards,
    MBN.

    Hi
    Yes both results are the same if you check the RESB table with reference to the planned order number for which you have fetched data from BAPI BAPI_PLANNEDORDER_GET_DETAIL, both are the quantities are same, Also you can see the same in MD12/MD13, but when you check the RESB table only input as one of the component assigned in Planned order , then the quantities will differ,
    The result will be the same only in case when you execute the data from table RESB with respect to the planned order number( given input in BAPI).
    Regards,
    Anupam Sharma

Maybe you are looking for