"Partially working" remote and no Speaker menu on Nano with HiFi

I just received a new HiFi - I docked my Nano (4gb) and it works fine... however:
• Apple remote only controls the volume. Forward, Back, Menu, Play/Pause do not. The green light on the HiFi goes on when these buttons are pressed (Amber for the Menu button)
• No "Speaker" menu is showing up on my Nano, so I can't activate features like Backlight, Album art, etc. Nano is running 1.3 - and I just reset and restored it through iTunes - still nothing.
Any help would be appreciated!

Hi
I've just run home from the shops with my Hi Fi and had the same problem as you with the remote. I have what I like to call a vintage ipod (3rd Generation, 15GB), and in order to get the remote control working in all its glory I did a soft reset (shuts down, apple logo appears, reboots and all is magically fixed). For my model this involves pressing the menu and play button simulataneously for a couple of seconds. If you do a soft reset for your model whilst it is connected to the Hi Fi, maybe it will work for you too.
Hope this helps, it's surprisingly annoying when you feel cheated out of functionality!
MrsW

Similar Messages

Time Capsule error 22 - My time capsule was working fine and didn't notice anything wrong with it until it stopped backing up about two weeks ago. I never changed anything like computer names or the Airport settings. All I get is the following: The backup

Time Capsule error 22 - My time capsule was working fine and didn't notice anything wrong with it until it stopped backing up about two weeks ago. I never changed anything like computer names or the Airport settings. All I get is the following:
The backup disk image "/Volumes/Data/Linda's Computer 1.sparsebundle" could not be created (error 22).
I tried resetting the Time Capsule and connecting with an ethernet cable, although the Ariport Utility says everything is working fine through WiFi.

If the light will not turn on the TC is dead. No matter that the hard disk is running.. it should only run at start up or when it is accessed not constantly.. that means the board in the TC has failed. Apple do not repair them.. They will replace it under warranty or applecare.
If you have gone over the 12month warranty it will still be covered if you have applecare on any computer or an Apple TV. In fact the cost of the apple TV plus apple care is still cheaper than buying a new TC.. so it is a route some people are taking.. certainly depends.. in some places like Europe or Australia now, there is a recognition that statutory warranty must be longer on a product that is premium to the market. 12months is not good enough. Apple will sometimes listen.
They might be fixable but I do not know how.

How do i readjust the right and left speaker in iPod nano 2nd gen.

How do i readjust the right and left speaker in iPod nano 2nd gen.

Are you playing a song in iTunes that listed in contents of iPod while it is connected. Try going to your music lib and play a song and disconnect your iPod.
Also, make sure you are not located in some sub dir that utililizes iTunes.
You can also hit 'ctrl,alt,delete' to see what applications are running on your PC.

Reply address: is it possible to use another reply address other than the pop address used in my account. I have a special work account and would like to send emails with that address as my reply address...or sent from address

Reply address: is it possible to use another reply address other than the pop address used in my account. I have a special work account and would like to send emails with that address as my reply address...or sent from address

i found out how to do this finally!
1) set up google gmail account to forward your emails to (from the [email protected])
2) go to your gmail account
3) go to settings (cog in right hand corner)
4) go to 'accounts and import'
5) go to 'send mail as'
6) click 'Add another email address you own' - add your [email protected] address
7) google will send a verification email with code to that email address.
8) enter code
9) go back to gmail account >'send mail as' and select 'make default'
10) close mac 'mail' program and reopen it.
as long as you have gmail account selected as the primary account in MAIL - mail will now come throught as being sent from that [email protected] address!!

I have MacBook 10.68. Yesterday I downloaded the Apple version of Java which I must have to work remotely and now I get the message,"blocked plug in". Any thoughts? I cannot access website content any more

I have MacBook 10.68. Yesterday I downloaded the Apple version of Java for my system because my company requires it to work remotely but now I cannot access the content on various websites. I get the message, "blocked plug in". Any advice? Thank you.

I just downloaded the firefox 4 update. how do I get rid of it NOW. I need a working computer and dont have time to fight with it

Please can some one help me get rid of this thing so I can complete some work that is right up to the dead line. I d not have time to mess with this. How can I get back to the version that was working before I installed 4

http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
http://www.mozilla.com/en-US/firefox/all-older.html

ODI work repository and master repository account locked unknown reason....

Hello,
It has just happened that the work repository and the master repository has been locked for an unknown reason. It is to be noted that a remote connection to the environment has been done from a different client environment than the one already has been set with. Upon trying to connect the credentials didn't pass and was was found locked for both the work repository and the master repository.
Help with the issue would be much appreciated with suspected causes of such incident.
Regards,

Hi,
could you compare resultset from this query
select CON_NAME,PASS from snp_connect where CONNECT_TYPE = 'R'
executed both on backup and "actual" master repository?

Will the iPod touch come with Earpods with Remote and Mic?

Will the iPod touch come with Earpods with Remote and Mic? Will they be the Sam that come with the iPhone?

No, it does not come with Remote and Mic, but it will come with the new design. (dosen't say on tech specs)

Integrating DropDown menu of flash with director

Hi everyone,
I have a movie wherein i am using small flash movies as
component for better UI effect. Also we are using other component
like drop down, text boxes and radio buttons developed in flash.
But the controls that we have in flash are causing problems
like I have a drop down menu developed in flash. I want to
use it director to give me drop down effect and also features to
add item to it. It was working fine with bitmaps earlier but
considering the scaling issue we moved to Flash. I could easily
attach beheviour to bitmaps. But the same is not working with Flash
(.swf) file.
This is what I am doing....
Dragging the dropdrop.swf file in director's cast and then
attaching Beheviour to it for drop down
I Think it is does not support Flash files so If there is any
work around this then please let me know. Also suggest if i am
heading in the right direction.
Any sort of help will be appretiated.
Thanks
Atul Saxena

klondike91 wrote:
> I'm using the Spry horizontal menu bar, which works
fine. However, the menu
> dropdown conflicts with a flash animation I have just
below the menu bar.
http://www.adobe.com/go/tn_15523
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Windows 10 Start Menu not updating with the newly installed apps or programs

I'm running Windows 10 Enterprise Preview inside a Windows 8.1 Hyper-V instance. I've been installing a lot of different applications for testing & I've come across a strange problem. When I install a new application, it doesn't show up
in the start menu. If I search for the app, it comes up & I can launch it, pin it etc. Next time I log out & log back in the application is there. I first noticed this when I used Programs & Features to add OneNote into Office
2013.

> When I install a new application, it doesn't show up in the start menu. If I search for the app, it comes up & I can launch it, pin it etc. Next time I log out & log back in the application is there. I first noticed
this when I used Programs & Features to add OneNote into Office 2013.
Aha, that may well be what I experienced too. The first thing I
installed on Win10 was one of my own products, and while it installed
and worked fine, and the start menu items could be found by searching,
my product directory was not showing up under All Apps.
A day later I installed another product, and after that I noticed that
I could see both this new program's directory and my own. A subsequent
product installation also showed its program directory straight away.
Dave

AirTunes remote speaker menu not recognized in iTunes

When I first got my AirPort Express, I had no problems playing my iTunes music over stereo speakers connected to the AX. Now the Airtunes remote speaker menu does not show up in the lower right corner of iTunes. This problem started many months ago, around the time when I moved into a new apartment. Not sure how that would cause it, since I still had no trouble with internet access through the AX. At first, I tried to troubleshoot, but eventually just gave up on it. Now I've decided to give it another shot, but I've scoured the discussion forum for answers and found nothing that works.
Here's what I've tried so far:
I recently reset my AX multiple times (separate issue) and this did not do the trick. I have checked "Look for remote speakers" under the Advanced options in iTunes. I have set my ZoneAlarm firewall to "medium" setting (which is supposed to allow UDP port access), and even tried turning off the firewall altogether, then restarting iTunes. I have Symantec AV running, but I don't know of any options that would affect the port access. I have opened the AirPort Utility (v5.3.2) and noticed that the "Music" tab does not show up in the settings for my AX. It seems that other people who had the same problem as me were at least able to see the "Music" tab in the settings. Restarting my PC does not seem to help either.
BTW, I have iTunes version 7.7.1.11.
Any suggestions or advice would be greatly appreciated. Thanks very much in advance!
Dave
EDIT: I also tried "pinging" the IP address of the AX in cmd.exe and it showed me the few lines of code that it supposedly does when the AX is communicating with the PC properly.
Message was edited by: dave.matlin

bump

Remote and mic not working

I got a earpods with remote and mic for my iPod touch quite while ago,
it stopped working a couple of months ago, how can I fix this!

First see if the earphones/mic/remote work with another device or if a know working one works with your iPod.
If the iPod is the problem:
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Fix it yourself
iPod Touch Repair – iFixit

Side, back, and center speaker on inspire p7800 not working, PLEASE HELP!

I have had the inspire p7800 speakers for awhile, and they worked great, the sound was really great. Then a little while ago, the side, back, and center speaker stopped working. If i turn the volume up, i can hear a kind of static noise in them, but when i play a game or listen to music they don't do anything. i have an Audigy 2 zs sound card, and i just installed all the creative mediasource software. I was using the speakers fine without the software, but i read on a different post, that you can turn on cmss in the EAX control panel. i installed all the stuff, but i can't find the EAX console anywhere on my computer. all the mediasource is is a music player, and a file converter. The speakers stopped working about a week before this, and i unplugged everything and repluged it. After that the center speaker didn't work, but the others did. but now only the front left, and front right speakers work. Please help me with this problem.
Message Edited by Will99 on 10-19-2005 12:42 AM

Warran wrote:
I just got the speaker system in today and was trying to set it up, I plugged all the wires in all the right places and the system would not power up. I saw the light for the wired remote flash just once. I thought it was? a power malfunction so I got a different power cord and tried it out, but still nothing...could somebody please help me. Thanks in advance.
If it doesn't power up then it's either the subwoofer or power adaptor that's faulty. So the only thing you can do is contact customer support or the vendor.

HT3176 Ive lost my old apple tv(1generation) remote and I bought a new one. Im trying to move the arrows and its not working. Can you please help me!

Ive lost my old apple tv and I bought a new one. When I try to mmove the arrows of the remote it dosent work. Can you please help me!!

http://support.apple.com/kb/HT1555
"Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair."

How to set Menu and Title functionality for a remote control in a menu?

I have a main menu (countries) and under each country there is a submenu (regions). When I play my DVD on my Mac it seems to function alright:
If I go to country C and hit the "menu" button, nothing happens (I see the "action prohibited" line popping up). And nothing should happen of you hit menu in a submenu. Only if you hit Title/Top menu you should be able to go to the main menu.
However... When I play my DVD on a DVD player (and I tested it on 2 different ones) and I go to a the Country C and hit the "menu" button, I am suddenly transfered to Country A. And if I go from the main menu to Country D and I hit the "menu" button, I go to... Country A. The menu button seems to be linked to the first submenu. Which is very odd!
So there is definately something going very wrong when using the menu/title buttons during playback when I am in a submenu (not while playing a track).
Can someone help me? Is there a way to define what happens with the remote control buttons menu or title when you are in a submenu and NOT playing a track? I can not find any controls for that.
Thanks!

Does this mean I should select "not set" in the general tab at the dropdown menu's for Title, Menu and Return in the Remote Control section? I can't find any other place where I can select menu or title.
But if I set these to "not set",the menu and title buttons still work in simulation mode... So I guess I should do something else in order to disable menu and title? Sorry for the amount of questions from my side!

"Partially working" remote and no Speaker menu on Nano with HiFi

Similar Messages

Maybe you are looking for