Partical amount transfer through ABUMN

Hi,
By mistake we have created the asset master data with wrong cost center and plant and posted the entry of acquisition in 30.06.2008 for Rs 100000. The opening balance of this asset is on 01.04.2008 is NIL
Later on we have discovered the mistake and now we want to rectify the partial amount say 60000/-.
Hence through transaction code ABUMN, we have created another asset and try to post the partial amount. While doing so the message No: AA416 appears:
Retirement of old assets data not possible (No existing old assets data)
Diagnosis:
You have tried to post an retirement based on amount using transaction type which refers to old assets data (acquisitions from previous year)
However, the sum of the APC at the start of the fiscal year and the transactions, related to the past, equals 0.
Procedure:
Check the transaction type entered and the asset.
Please give the solution how to post the partial amount through transaction code ABUMN.
Regards,
Babjee

hi,
select from current acquisation year.
govind

Similar Messages

Report for track the assets history only for transfer assets through ABUMN

Hi experts,
I am transferring the some value from one asset to another asset through ABUMN, is there any report to see the this kind of transfer assets
useful answers duly rewarded

Hi,
You can view the intra-company transfer report S_ALR_87012054.
Thanks
Jagdish

Multiple Assets transfer in ABUMN

Hi All,
I need to transfer 1 asset to multiple assets (eg 20 assets equally) within same comapany code. I tried thru T code ABUMN by choosing option "multiple assets".
There, under "From asset" i gave the same asset number 2 times, one below the other and in "To assets" I gave 2 different assets. When i hit enter, the second line item gets deleted, making 1 asset transfer to 1 asset.
Could anyone let me know whether its possible to transfer 1 asset to multiple assets in ABUMN or any other way.
Thanks,
Ameet

Hi,
This can be done through ABUMN only, but not ata time. for example:
You have to post 3 transactions individually to that old asset.
For the first ABUMN transaction choode partial transfer and choose amount specification.
For the second ABUMN transaction choode partial transfer and choose amount specification.
For the last ABUMN transaction choose Complete retiremnet. (So the balancewill be transfered to the third new asset)
Please check.
JK

Re : Inter company stock transfer through EDI

Hi
      How to do the intercompany stock transfer through EDI. In this if Purchase order is created from one comapny a sales order should created automaticall in another Company. Fot this what is the SPRO settings.
How to do this.
Thanks
Anto

Hi,
continues from here,
Inbound file:     edi_in
Function module:     See text below.
Status file parameters
Directory:     /home/edi/<portname>/
Outbound file:     status.idoc
Function module:     Leave blank if using above
u2022     Both the portname and the exchange directory should be created according to the same naming convention. However, the portname should be in upper case whereas the corresponding directory name should be in lower case (see examples below).
     Portname (upper case):
                         <portname>
     Exchange directory name (lower case):
                         /home/edi/<portname>
     where <portname> consists of:
     EDI<system name><client number><id char>
     <system name> is the name of system on which port exists eg.      F01, PG1 etc.;
     <client number> is name of client on system which will use this      port; and
     <id char> is a single alphabetical character such as u2018au2019,u2019bu2019 etc.      typically,      u2018au2019 will denote dynamic outbound file naming (used      for testing) whereas      u2018bu2019 will denote static outbound file naming.      All ports will use static      inbound filenames.
For example, the name of a port using dynamic file naming on system F01, client 610 would be named EDIF01610A. The exchange directory would be named edif01610a. Similarly, the name of port using static file naming on system PG1, client 600 would be EDIPG1600B. The exchange directory name would be edipg1600b.
Note that the function u201CEDI_PATH_CREATE_USERNAME_DT_TMu201D can be used in the u201CFunction moduleu201D field of the Outbound file parameters if IDocs are to be written to multiple files. In this case, the corresponding outbound filename field should be left blank. The standard IDoc exchange interface between the SAP EDI component and the EDI subsystem uses a single file for each transfer direction. However, should the exchange interface change, or for testing purposes, the function modules for dynamic naming can be used.
2.4.2.     Control of EDI processes in R/3
2.4.2.1.      Maintain: Outbound Process Code (WE41)
IMGCross-Application ComponentsALE Extensions  Outbound
Check that the outbound EDI processes in the R/3 system are defined. Indicates which ABAP/4 function module to execute in order to create an outbound IDoc.
The following assignments are available for R/3:
2.4.2.2.      Maintain: Inbound Process Code (WE42)
IMGCross-Application Components  ALE  Extensions  Inbound
Check that the inbound EDI processes in the R/3 system are defined. Indicates what kind of inbound processing to execute.
     A long list of options is available under Processing by function module, relevant ones are:
INVF     INVOIC FI     Invoice receipt (Financial Accounting)
INVM     INVOIC MM     Invoice verification (Mat Management)
ORDC     ORDCHG     Change customer order
ORDE     ORDERS     Create customer order
ORDR     ORDRSP     Purchase order confirmation
2.4.2.3.      Control: System Process Codes (WE40)
     Choose Processing by task. Check that the codes indicating the type of EDI processing error are defined. The only valid entries are the entries shown on the screen, as they are directly called via the EDI basis module.
2.4.2.4.      Control: Status maintenance (WE47)
     Check that the codes indicating status of IDoc processing are defined. The status values for outbound IDocs are between 01 and 39, while the status values for inbound IDocs begin with 50. These values are delivered by SAP and cannot be customised.
2.4.2.5.      Control: Partner Types (WE44)
     Check that the codes that identify the commercial relationships between the receiver and sender are defined. Values are delivered by SAP. Names of the programs and routines that validates the entry of the EDI trading partner ID:
Partner type     Report name     Form routine
B - Bank     RFETESTP     READ_T012
KU - customer     RSETESTP     READ_KNA1
LI - vendors     RSETESTP     READ_LFA1
LS - logical system ( ALE)     RSETESTP     LOGSYS
2.4.2.6.      Control: Forward Inbound (WE45)
Allows for the forwarding of IDocs to a specific application. Contains the exactly defined destination of an inbound IDoc within the SAP system. Usually no changes are required.
2.4.2.7.      Control: Status Process code (WE56)
Choose Processing by task: The following set-up has been provided as default:
Process code:     EDIS
Identification:     TS30000078
Description:     EDI-IDoc status record processing
The process code is for inbound status, The ID type is an identification code for inbound processing method (workflow or standard task) of the status record.
3.     MM IMG CONFIGURATION
3.1.     Global settings (IMG):
3.1.1.     Units of measure (IMG  Global settings):
The ISO code is important for EDI. It is used to convert the internal SAP units of measure into standard units.
The MM configurer must link the Unit Of Measure, EACH, with the ISO code PCE (Piece).
3.2.     Link Schema to Purchase order
Check the following:
IMG  MM  Purchasing  Message determination  Message determination  Message Schemas
Execute transaction u201CDefine Message Schemas for Purchase Orderu201D
Select transaction: Assign Schema to purchase order
Add:      Usage =B for output
     Application = EF for purchase order
     Procedure = RMBEF1 for purchase order
3.3.     Link application to EDI interface via message control:
IMG  MM  Purchasing  Messages  Output Control
Check following under Output Control:
     Condition table
     Access sequence
     Message types
     Message schema
     Output control
3.4.     Enabling Multiple Output for Purchase Orders (Optional)
For example: EDI & Printing
IMG  MM  Purchasing  Message determination  Message determination Access sequence
u2022     Create new access sequence (e.g. ZPUR), copy the access sequence 0001 but leaving the ''E'' flag blank (Exclusive is off). (Transaction M/50)
u2022     Goto Define message types  maintain message types:
     Create a new message type (e.g. NEU1), setting the output type to 1 for printed output and using ZPUR as access sequence. (Transaction M/34)
u2022     Goto Message Schema  define message schema  maintain output determination procedure:
     Update procedure RMBEF1 by adding a step for the new condition type (e.g. NEU1) prior to the standard delivered step for NEU. (Transaction M/36)
u2022     Goto Processing program  Define Processing program  Output program: Purchase Order.
     - Add a NEU1 record to table TNAPR. The program FORM Routine and layout must be specified. (Copy an existing NEU record). (Transaction OMTB)
u2022     Goto Processing program  Define Processing program  Output by partner type.
     - Add NEU1 record for VN (vendor). (Transaction OMTG)
3.5.     Link Output type (fax=2, E-mail=7) to NEU (Purchasing)
IMG  MM  Purchasing  Message determination  Message determination Access sequence
u2022     Goto Processing program  Define Processing program  Output program: Purchase Order.
     - Add another NEU record to table TNAPR with the appropriate output medium. Copy an existing NEU record. (Transaction OMTB)
u2022     Goto Processing program  Define Processing program  Output by partner type.
     - Add NEU record for VN (vendor). (Transaction OMTG)
4.     SD APPLICATION REQUIREMENTS
Assumption: SD is only used for testing purposes and configuration is based on a need basis - only configure the minimum.
Reference SAP Course manual Chapter 11.
4.1.     EDI Configurations
4.1.1.     Conversion of SAP item categories to IDOC item categories (VOE1)
IMG  S&D  EDI  EDI Messages  Conversion of SAP item categories to IDOC item categories
Add the following entry:
For Standard Item description :     0     OR     LDN
Typically error message: ''Transaction LDN is not defined".
4.1.2.     Partner functions
IMG  S&D  EDI  EDI Messages  Configure EDI Partners Partner  Application  Partner function
Check that the following partner functions exist: (at least)
SP     Sold-to party
VN     Vendor
BP     Bill-to party
SH     Ship-to party
Note - the German abbreviation is passed to the IDoc.
4.2.     S&D Sales Configurations
4.2.1.     Maintain Item categories
IMG  S&D  Sales  Sales document  Sales doc item  Define item categories
Add LDN for standard item:
          Item type = B
          Relev for billing = B
          Tick following:     Bus data item
                              Sched line allowed
                              Credit active
                              Pricing
          Screen seq. grp = N
4.2.2.     Assign Item categories
IMG  S&D  Sales  Sales document  Sales doc item  Assign item categories
Add/Update the following entries:
     1     2     3
Sales doc type     OR     OR     OR
Item category group     NORM     DIEN     LEIS
Item category     LDN     TAD
LDN     LDN
4.2.3.     Assign Schedule line categories
IMG  S&D  Sales  Sales document  Schedule lines  Assign Schedule line categories
Add Item category LDN to table (with no other parameters).
4.3.     S&D Pricing Configurations
4.3.1.     EDI pricing condition types
IMG  S&D  Basic functions  Pricing  Pricing control  Define condition types  Maintain condition types
Maintain the following condition types:
     EDI 1 - Calculate type =C for Quantity
     EDI 2 - Calculate type = B for Fixed amount
4.3.2.     SD Pricing procedures (V/08)
IMG  S&D  Basic functions  Pricing  Pricing control  Define & Assign pricing procedures
Maintain pricing procedure for ZVAA01 (Standard).
Select control and add EDI1 and EDI2 as steps 1 and 5 respectively with no other parameters.
5.     INVOICE IMG CONFIGURATION
No additional IMG configuration (not partner specific) was needed for Inbound Invoice processing.
Thanks,
Swamy H P

Delivery cost for Stcok transfer through M.type : 351

Hi Experts,
Can anybody explain how to capture the delivery costs for Stock transfer through M.Type 351.
Also kindly explain the steps involved in configuration of the same.
Thanks in advance,
Prabu

Hi,
Once the Config releated to Setup stock transfer order is done.
To include the cost you need to include the pricing procedure related to STO needs to be assigned to your schema group.
Goto SPRO -MM-Purchasing -- Conditions
Here you need to assign the Schema determination RM2000 to your Purchasing organization.
Then when you create the STO in the recieiving plant, then you will get the condition tab in the item details of STO, there you can maintain the delivery costs for that material & send the STO to your supplying plant.
Supplying plant will send the material through MB1B & with mvt type 351 to recieving plant.
At the time of Goods reciept system will capture the delivery costs in the recieving plant for that STO.
rgds
gsc

Partial amount unblock through t code MRBR, it is possible - MRBR

HI FICO Expert,
I want to release partial amount unblock through t code MRBR, it is possible ?
Example :
At the time of Vendor Invoice booking total amount booked in BLOCKED FOR payment amount Rs 10000/-
now i want to release only Rs 9000/- balance in blocked for payment Rs 1000/-
Thanks
Kamlesh

Hi Kamlesh,
No, it's not possible. You can only remove payment block code in MRBR.
You might be able to respond to requirement by manipulating payment block and payment terms in FB02.
If it's inadequate, it will require a custom development.
regards,
Eddgar

I need some BAPI standard to make asset's transfer by ABUMN transaction

Hello!
I need to make the asset's transfer by ABUMN transaction, but I don't know any BAPI to this. Someone could say me if there is some BAPI to use in this case? I tried to use SHDB, but there are many possibilities of the transfer. In this case I could need to use some BAPI or function standard to make the asset's transfer. Someone could to help me?
Regards.
Renato Motta

Check OSS [Note 216806 - New posting transactions and batch input|https://service.sap.com/sap/support/notes/216806]
Regards,
Raymond

Transfer through the iterator object....

Hi,
I am writing a code in JSP where i need to transfer through the iterator object and print all the objects i.e. object name and the value in the page. Please give me an example how to write the code in jsp with the iterator object.
thanks.

[http://www.google.com/search?hl=en&q=JSP+iterator+examples&meta=]

Call transfer through Hunt group

Hi,
we have a call manager version 8.6 where we have mutiple huntgroups configured. Following is the call flow
PSTN callers call a DID number from outside which after the translation on the gateway, hits a hunt pilot number on call manager and eventually the call rings on all the line members of the line group. One any of the line group member picks up the call and tries to transfer the call to any internal or external number, we get the following error message on phone screen and transfer does not work
" External transfer Restricted"
Now this happens even if we dial the hunt pilot number internally from an iphone and then if one of the members tries to transfer to an internal extension or external number, we get the error message
More Information:
There are many other hunt groups on the same call manager server and tries to transfer the call same way as the non working one and it works for them
So i checked the difference. All the members of all the hunt groups are device profile logged into physical phone. The only difference was that working hunt group members are logged into 6921 phone where as non working users are logged into 7942 phones (sip firmare) and the profile are created for 9971 although we dont have any physical 9971 phone
So it seems that call transfer through hunt group does not work only if the members are logged into 7942 (sip) phones and works when they are logged into 6921 with 9971 Device profile
I hope its clear. Please let me know if its a known issue or limitation with 7942 phone. Any help will be appreciated

Try changing the Block Offnet to Offnet Transfer CallManager Service Parameter to False and test again. If it then works, we'll probably need CallManager traces to see why both numbers are getting marked as offnet.

Lenovo Thinkpad X1 - Extremly slow file transfer through e-sata

Hi there! I have got another issue with my notebook - the file transfer through e-sata is extremly slow (about 5MBpS). Using Windows 7. Where could be the problem? Thanks.

Hi Gabbi,
thanks for posting. You might want to check in your control panel which Lenovo preloaded software are installed. One software which I've seem has caused this issue is the Lenovo Rapid Shield and and Lenovo Airbag Protection.
Could you try disabling them and check for the changes.
do let me know..
regards

What is the Maximum File SIZE Can we transfer through XI.

Hi All,
What is the Maximum File SIZE Can we transfer Through XI?
With Regards,
Mahesh

HI,
Please refer the below thread which talks about the same.
Wat is the maximu size of data XI can handle
There can be many threads related to this topic I suggest u try to serach on SDN first.
Thnx
Chirag

PURPOSE OF MATERIAL TO MATERIAL TRANSFER THROUGH 309

Hello Experts,
Can anyone please tell me the purpose of material to material transfer through 309.
Thanks and Regards
Nilu S.

Hi,
309 is used for transfer posting.
Lets say
Example-1:
You may change batch numberof a material to a different batch number ,which means that the quantity keeps staying the same.
Example-2:
You have material X & nedd to scarp, Then a Create scrap materials using Material type ABF or a copy of ABF.If the UOM of material X & Scrap are the same then do a material to material transfer using 309 movement.
Regards,
Biju K

Need stock transfer through sd cycle

Hi experts,
I need the procedure for stock transfer through SD cycle. Plz help me.
Naren

Hi
Check below link.
[Re: sto in same plant and sto in different plant...]
SAM

Report to check the stock transfer through 303 mvt type

Hi,
I understand that the stock transfer can be done through two ways
1. Using 351 against UB PO and go MIGO using 101 --> Can be checked in the report MB5T, for stock in transit
2. Using 303 and 305 mvt type --> the stock lies in Stock trans(Plant)
When we do 303 mvt type, is there any standard report to check the stock in stock trans (Plant) ? Please let us know.

hello
for this you can use MB51 only. same report you can give the movement types as 313 & 315.
Laxman

Assets transfer using ABUMN and getting error already retired.

Hi AA Gurus
I have two assets and want to move to sub assets of another asset.e.g asset 201,202 to be transfered to 203-1,203-2.
I created sub asset using AS11.I am transferring to sub assets using ABUMN. I get ever time error as "Transaction on asset 123 203-1 not possible, retirement already in document ". This asset is not retired. So I created 2 assets fresh ( doc date ,acqusition date of today to experiment ) and then created a sub asset using As11. When I tried ABUMN for transferring it came up with
same message retirement not possible ,retirement already in doc. What is happening here ? I have checked the asset using as03 and don't see as retired ( i just created the asset ). Kindly give me some idea how to transfer two assets to sub assets of another asset.
I have checked other similar question on forum but solution did not work for me.Kindly give me some idea why this error keep coming even though asset is not retired and created today itself to test ABUMN.
Thanks in advance
Satya

Bernhard
Here are my observation and question in itlaic .Kindly suggest me what should be done.
Please go to Financial Accounting -> Asset Accounting -> Master data -> Specific Time-Independent Management of Organizational Units
Not checked for any co code.
If you set this indicator, the system manages the organizational units 'business area' and 'cost center' (and thereby 'profit center') as not time dependent in the asset master records in this company code.
Any change to these organizational units during master data maintenance then automatically generates a transfer posting document.
If the indicator is not set, you have to create a new asset master record, and manually transfer the entire asset, when the business area changes (and you are using business area balance sheets).
I am doing it manually only.I don't think that there is organizationla units change is invloved.I have two assets and I am transferring it as two sub assets of a new asset ( created for this purpose only ).All the assets are of same class.
Also, please go to Asset accounting -> Integration with GL -> Post depreciation to General Ledger -> ... -> Activate account assignment objects
Please check if assignment object KOSTL has field "BalSh" ticked.
No it is not ticked. Other two active and agreement are ticked.
Account assignment objects that are relevant to the balance sheet can no longer be changed directly in the asset master record once the asset has been capitalized. Instead, such assets have to be transferred to a new asset master record to make this change.

Partical amount transfer through ABUMN

Similar Messages

Maybe you are looking for