Parties and Services in Configuration Scenarios

Hi,
I think I understand the distinctions between parties, business-systems, and -services.
If I define an integration scenario in the repository and check the checkbox b2b-communication, I have to use parties in the directory integration scneario configurator.
Do I then also have to provide a partner for my own company and assign my business-systems and services under this node? I otherwise get problems when I assign the services to the application systems in the configurator and my receiver determinations get wrong.
Any thoughts and information about this topic is welcome.
Thanks,
Hans

Hi Hans,
it is not necessary to define your 'own' party if you only have 'intra-enterprise message exchange'. The big deal about parties is the possibility to define 'additional' IDs like DUNS-numbers to the Party - this is necessary whenever an Adapter is used that requires specific IDs (these are typically B2B Adapters only). The Receiver-Adapter (for messages coming into the Integration Server) will map from an additional ID to the XI-Party name and the Sender Adapter (for messages sent out of the IS) will map from the XI-Party name to the additional ID as defined within the Sender channel.
In other words: parties are needed, whenever one Communication Partner's message format expects meaningful values according to a specific schema - not only in the payload but also in the message header (liek RNIF).
Please be also aware, that the Scenario Configurator tries to capture typical use cases - it can not handle everything so it is possible that one has to change objects afterwards.
regards, frank

Similar Messages

Error in Service with Party and Service without party scenario

Hi All,
I am configuring an external system to customer SAP system scenario.
I have configured the external file system as Service with Party and the receiving SAP system as Service without party.
All the configuration including the "Virtual receiver" set up has been done properly but i am still getting the error "No receiver could be determined".
Can somebody help me on this ?
Thanks in advance.
RGds,
Vasanth.

Vasanthakumar,
in my previous experiences with internal/external parties communication, I've found out that the best practice is to create an integration scenario and then create the configuration scenario from scenario wizard. It is much simpler and easier.
Briefly, you'll have to create a dummy party/service in order to "wrap" your internal system, since the external party should not receive information regarding internal systems (Business system name, for example).
Regards,
Henrique.

Deleting a Configuration Scenario in Dev

Hello,
When we decide to rearchitect interfaces in PI, and are faced with deleting configuration scenarios in Development, how do those deletes "transport" up into QA and Production when there is nothing to "export" in the source system (because it was deleted?
It is not a best practice to directly change QA or Prod, so we are assuming that carrying deletes through the PI landscape must have a transport mechanism.
Thank you.

Hi,
If you are using File transfer mode for exporting Configuration objects, then you have a option Include Deleted Objects which you can tick and then your deleted objects will be deleted in PI QA or PRD system when you import this file in these systems.............
If you are using CTS+ for exporting objects, then when you delete your configuration scenario in ID and activate it, then you can right-click your change list having the deleted object and release it for transfer...... then a transport request will be created for it which you can import in QA or PRD system and then your configuration scenario will be deleted in your these systems.
Regards,
Rajeev Gupta

ATP Check for service parts and procurement scenario

Dear Experts,
We're testing CRM service scenario, focusing on the ATP check.
After running the avaiability check for the service parts in the service order,
is it posssible to determine the scenario automatically as follows?
- when the necessary parts items are not available
-> "Procurement" scenario will be used.
The corresponding documents such as PO, PR or Reservation will be generated in ERP according to the setting "Define Logistics Scenario for the Procurement of Materials and Services".
- when the necessary parts items are available in stock
-> "Material withdrawal" scenario will be used. The items will be withdrawn at the service confirmation.
From our understanding, the determination of the above scenario is controlled by the item type(ex.SRVP),
so we expect that the system sets the appropriate item type depending on whether the item is available or not.
Is there any possible solution for this?(i.e.standard customizing, BAdI etc....)
Any advice would be higly appreciated.
Best regards,
F.T.

Hi F.T,
I have worked in Service Order Management Scenario, but not integration of Service Orders for ATP Check. But I found this Presentation which I hope might be somewhat helpful regarding the feasibility of the Business Scenario. You can have look at the same and will be able to decide if this is the correct way forward or not.
[Presentation|http://www.google.co.in/#hl=en&biw=1366&bih=548&q=ATPCheckforservicepartsandprocurementscenarioinSAPCRM+++&aq=f&aqi=&aql=&oq=&gs_rfai=&fp=a254323013e5943b]
Hope this will help.
Thanks,
Samantak.

Configuring AD Sites and Services best practice for multiple office site ?

Hi People,
Can anyone here please suggest me or share the link of what is the best practice in configuring the AD Sites and Service for single AD domain with multiple office sites ?
I'd like to know more about the number and the direction of the connection between Domain Controllers in one site to the Data Center and vice versa.
Thanks.
/* Server Support Specialist */

Hi People,
Can anyone here please suggest me or share the link of what is the best practice in configuring the AD Sites and Service for single AD domain with multiple office sites ?
This series can be useful:
Active Directory Structure Guidelines – Part 1
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Adding Business service in an configuration scenario

I have created an Integration scenario in IR. And then I have imported the same into the ID.
Now in Integration scenario configurator->Assign Services step, how can I assign the Business Service? (Not a Business System)

Hi Mahesh,
What you can do is:
1. In ID, Tool --> Transfer Integration Scenario form the Integration Reposigtory.
2. In next screen choose, Integration Name and namespace.
3. Then in the next sceen, Give a meaning full name to create the "Configuration Scenario".
4. After comleting step 3, you will get a new screen "Integration Scenario Configurator".
5. Now, in the new screen click on "Assign Services" to add your "Business System" or "Business Service". (Just click on plus sign and then take F4 help to search your business service).
Note:--> To chose different Business Services or System, press the AERO in blue color at the top of the screen just infront of Role.
6. After assigning all your business services or systems, press the Assign button.
7. Communication channels can also be added in the same way under "Cofigure Connections", but there is a trick. You need to create all communication channels before you import your integration scenario to ID.
I hope you will find it very helpful. Still if you have doubts in this let me know.
Regards,
Sarvesh
***Reward Points, if it helped you.

Integration scenario and configuration scenario - is it madatory

Hi,
Integration Scenarios are not mandatory, the reason for creating them is given in the blog you mentioned:
The advantages of defining integration scenarios in the Integration Builder (design tool) are as follows:
· The integration scenario provides you with an overview of the process and the process flow
· The integration scenario club together all objects like SWVC,Interface objects, mapping objects,integration processes.You can access all of these objects from the integration scenario.
· The integration scenario gives you the design time information which is required for its configuration.
The configurtation items are getting created.
Regards
Patrick

Hi Priya,
There are two things here.
1) Create the Integration Scenario in the IR.
2) Use the wizard to configure the integration scenario in ID.
The Integration scenario created in the IR acts as a template to create the configuration objects in ID.
The wizard will create the actual configuration objects only (not just documentation).
But creating integration scenarios is not mandatory.
YOu can as well create all the configuration objects manually.
Generally, you will go for Integration scenarios if you are building a general purpose product (Product based ).
If it is a project that you are building for a particular customer, you can chose to create the configuration objects using the configuration scenario approach.
Regards,
Ravi kanth talagana

ECS scenario - Service PO and Service Entry sheets in backend

Hello,
We are on SRM_SERVER 550, SP07 and in the process of moving to ECS scenario.
There are some questions from me on the Service procurement in ECS.
1. When we create a PO with service item in SRM, will it get copied to backend as a Po with item category 'D'? This is how it happens in classic scenario,but does the same hold good in ECS?
2. When creating the confirmation for the service PO in SRM for ECS scenario, this would be a time entry/service entry sheet.
Would this be replicated to R/3 as a time entry sheet using RFC call?
Standard SRM210 guide mentions that goods confirmation will flow to backend as GR thro ALE/IDOCs and service confirmation will flow to backend as service entry sheets using RFC calls.
But I wanted a confirmation if this is entirely a standard SAP scenario or are there any restrictions on this?
Regards,
Srivatsan

HI,
Following are answers to some of your questions -
1) What do you mean by default unit measure? If this is the unit of Service, then you may change this in Service Master (T Code AC03). If the unit is at line item, then it should be AU, because you may order multiple services under one line each having different units of measure.
2) The message "No message record could be found for output of message. Save anyway?" is displayed because, you have not maintained output message for service entry sheet. Either define the output or remove the warning message at Attributes of system messages.
3) The process of service PO is same as material PO. The difference is that the item category for service PO is 'D' & then you maitain services for the line item either with or without service master. After completion of service, you create service entry sheet at transaction code ML81N & after accepting the service entry sheet, service entry sheet based GRN is prepared. The person who is posting MIRO is not required to know Service Entry Sheet number to post MIRO. The system automatically checks the service entry sheets accepted. Anyway, the service entry sheet number can be displayed at Purchase Order History tab of the conccerned PO at PO display option (T Code ME23N).
Hope your query is fulfilled.
Reward points if the answer is helpful.
Regards,
Prashant Kolhatkar

Import ID Configuration Scenarios and keep the same Business System names

Hi Guys,
Is it possible to transport ID Configuration Scenarios Objects between 2 XI systems and keep the same names for both sender and receiver Business Systems ? That is, to skip the SLD lookup for transport Source and Transport Targets systems ?
I tried to create the same Business Systems under the same name twice, but this was not possible. Any ideas ?
The reason is that I want to transport all the objects from one XI DEV server to another XI DEV server.
Thank you,
Best Regards,
Evaggelos Gkatzios

Hi,
We have done same but with bit of manual work (without Transport).
Create SLD object in target system with same name as in Souce XI system SLD.
IR & ID was exported using TPZ files from Source system & were imported in Target system.
It used same object names in both XI systems.
Regards
Sushil

Route mail and Active Directory Sites and Services configuration

Folks,
I have a problem in the internal email routing. My network is spread across various regions and the branch offices are connected together in a mpls network (full mesh). Every region has its own Exchange Server with all roles installed and the smtp connection
to the outside world is linked to two Exchange servers in the headquarter server farm.
The problem is that internally I often see emails going across the Exchange Servers in the branch offices where there is low bandwidth (from 3 to 5 Mbps), thus email are sent first to these servers instead of going immediately to the Exchange hosting
the mailboxes of the intended recipients. This happens also with inbound emails.
This causes slowness in the email system and sometimes also the network with these branch offices suffers from packet loss or very high latency.
I know that Exchange is a site-aware application and uses the Active Directory topology for message routing and to communicate with the services that are running on other Exchange 2013 computers. For this reason I have checked the Active Directory Sites
and Services and surprisingly I have found that there are no sites, no subnets, nothing has been defined but the default settings, included the Inter-Sites transport which contains the default DEFAULTIPSITELINK.
Apart from the fact that clients use logon servers which are not supposed to use in the far remote offices, I am concerned of changing the Exchange Infrastructure whilst the email system is running and I would like to ask your opinion about my next steps:
1) Create subnets for every office
2) Create sites and then link them to the subnets done in point 1
3) Delete the DEFAULTIPSITELINK and create new site links based on the costs (network speed) in order to determine the best routing server. I have 5 remote offices with 5 different network bandwidth, so I'll have to create 5 IP site links: high cost for
link with slow network, low cost for fast network.
4) (Optional) Configure the Exchange-specific cost using the Set-AdSiteLink cmdlet to the AD IP site links created previously
Apart from the valid questions on why the previous Exchange Administrator have forgotten to set up the Active Directory (Topology) Sites and Services...
...And why have chosen to install all Exchange Roles to each server when there was no reason to do that (there are two servers connected to the external smtp gateways in the headquarter, so in my opinion the Exchange Servers in the remote branch offices
should have had only the mailbox and the cas role)...
As a matter of fact, my idea is to go further and create the sites,subnets and the ip site link. If I still notice a wrong email flow, I can configure an ad-hoc Exchange-specific cost using the Set-AdSiteLink cmdlet. Does this sound reasonable to you guys
or I am taking the wrong decisions?
Thanks

Thank you very much for your link. This is exactly the page I have read just before posting my question here. It is not easy for me to understand why this has been setup this way by a Microsoft certified engineer.
There are specific rules to follow when Active Directory and Exchange are located in multiple sites and I am not a skilled Exchange Administrator... he keeps saying that it is correct and also tells that if I go forward with my ideas there is the
risk to increase the level of complexity. I prefer more complexity than default setting, and as a consequence of that, connectivity problems!
Hopefully everything goes well. I will post my results here once I have done the changes
Regards

Windows Azure Pack setup - 500 Internal Server Error - failed to configure databases and services

Hi,
I am trying to setup the Windows Azure pack to use the site to configure the Service bus 1.1 installation. When I try to configure the Windows Azure Pack I get the following error:
Admin Authentication Site
500 Internal Server Error - Failed to configure databases and services: Object reference not set to an instance of an object.
I'm not sure where the logs are to see what is causing this error. I have tried running as admin, running as a different user with no luck.
thanks,
Georgi
Georgi

Here's what I'm getting for this error:
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite
Date: 3/27/2014 12:52:03 PM
Event ID: 103
Task Category: (65431)
Level: Error
Keywords: None
User: CLINICALSYSTEMS\Administrator
Computer: SERVER-PC.clinicalsystems.com
Description:
##### Application_Error: Exception=System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not
set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite" Guid="{1F742CC8-BDAA-56B6-A4B8-49F946D19CD1}" />
<EventID>103</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>65431</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-03-27T16:52:03.223741300Z" />
<EventRecordID>111</EventRecordID>
<Correlation />
<Execution ProcessID="8068" ThreadID="7680" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational</Channel>
<Computer>SERVER-PC.clinicalsystems.com</Computer>
<Security UserID="S-1-5-21-3021050346-1670805799-1320812125-500" />
</System>
<EventData>
<Data Name="exceptionInfo">System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar)</Data>
</EventData>
</Event>
Kori Francis Lead Software Developer Clinical Support Systems, Inc.

[svn] 4494: Added tests to hit channels and services configuration exceptions

Revision: 4494
Author: [email protected]
Date: 2009-01-12 16:12:09 -0800 (Mon, 12 Jan 2009)
Log Message:
Added tests to hit channels and services configuration exceptions
checkintests: passed
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/channels/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/channels/DuplicateIdTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/channels/DuplicateIdTest/error.t xt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/channels/DuplicateIdTest/service s-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/channels/InvalidIdTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/channels/InvalidIdTest/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/channels/InvalidIdTest/services- config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/BadDefaultChannelTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/BadDefaultChannelTest/e rror.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/BadDefaultChannelTest/s ervices-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/DuplicateDefTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/DuplicateDefTest/error. txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/DuplicateDefTest/servic es-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/DuplicateDefaultAdapter Test/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/DuplicateDefaultAdapter Test/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/DuplicateDefaultAdapter Test/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/IncorrectRootElementTes t/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/IncorrectRootElementTes t/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/IncorrectRootElementTes t/messaging-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/IncorrectRootElementTes t/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidAdapterIdTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidAdapterIdTest/er ror.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidAdapterIdTest/se rvices-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIdTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIdTest/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIdTest/services- config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/NoClassAttrTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/NoClassAttrTest/error.t xt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/NoClassAttrTest/service s-config.xml

my connectivity is okay, I'm getting errors from domain controller itself, I checked and the network is okay, but for the record here is my ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : server
   Primary Dns Suffix . . . . . . . : ***.tk
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : ***.tk
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connectio
n
   Physical Address. . . . . . . . . : 00-0C-29-32-7E-79
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 213.233.***.***(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 213.233.***.1
   DNS Servers . . . . . . . . . . . : 127.0.0.1
   NetBIOS over Tcpip. . . . . . . . : Enabled

Interesting Document: Service Deployment and Service Configuration within the Internet of Things

Hi All,
an interesting document:
Service Deployment and Service Configuration within the Internet of Things
Best regards,
Andy.

Hello Marek,
I suppose you are not planning to do any kinds of advanced config using several VLANs and multiple SSIDs so let's just make your configuration simple and working.
In short, you need to remove all references to VLAN 1 and to any subinterfaces possibly related to the VLAN 1. This means in particular (follow these steps in sequence):
Remove the Dot11Radio0.1 subinterface entirely
In the Dot11Radio0 section, remove the encryption vlan 1 mode ciphers tkip command
In the dot11 ssid ciscowifi section, remove the vlan 1 command
After performing these steps, make sure that the ssid ciscowifi and encryption mode commands are still present in the Dot11Radio0 configuration, and if not, reenter them.
Best regards,
Peter

Difference between Process integration scenario and configuration scenario.

Hi,
Please tell me what is difference between Process integration scenarion and configuration scenarion in SAP PI.
Is Process integration scenario is BPM concept? also what is the advantages over configuration scenario.
Regards,
Manigandan

Hi Manigandan,
Speaking widely:
Process integration scenario: there is a ccBPM, like the workflow in ABAP, even when you one inside the PI it's generated a workflow in the ABAP stuck
Configuration scenario: it is object to link the integration directory and the esr/IR when you define the logic of your implementation. It isnt mandatory, but you can organize better you develoments if you make an scenario for a "real scenario" like a file to soap integration, you can define it like a configuration scenario.
Regards.

After installing and configuring Workflow Manager and Service Bus, I'm getting 403.

I've spent the day installing SharePoint 2013 on a Windows Server 2012 environment. This server is not the domain controller. Following instructions on how to install and configure Workflow Manager and service bus, it appears although I'm following the instructions
(and I get no errors), something is not working.
If I try to go to the website that it creates in IIS
http://localhost:12291 I get a 403 error. Also if I perform the powershell query to get the port number "Get-WFFarm | ft WFMgmtHttpPort" I don't get any value returned to me.
Until I validate that the Workflow Manager is installed and working, I will not attempt to pair it to the SharePoint 2013 farm. Which hopefully makes this a Workflow Manager question not a SharePoint issue.
Can anyone offer any suggestions please? Should I even get a valid webpage if I hit localhost:12291? According to one walkthrough I've looked at I should get an XML display of workflow and security configurations.

I experienced the same two issues mentioned in this thread today.
Regarding the proper XML not appearing at <workflowhost>:12291 I was experiencing the same with an error message in Chrome saying the caller lacked read permissions, and 403 in IE. I had checked IIS, database permissions and connections and more.
All of the setup messages and status checks were a-okay. I voted Zimo's comment as helpful because it cued me in to examine the service in Central Administration - where I found there was no administrator assigned to the workflow service. As soon as that was
done, the workflow host site was brows-able.
The resolution to SharePoint Designer not offering 2013 workflows as an option was in my case that there was an additional WFE on which I had not installed the Workflow Manager
Client. This is noted with a bright yellow box in the section about configuring workflow with HTTP here:
http://technet.microsoft.com/en-us/library/jj658588(v=office.15)
If puzzles are good for your BRAIN then SharePoint will keep it really healthy!
Ramona Maxwell MCPD
SharePoint 2010, MCITP
SQL Server 2008

Parties and Services in Configuration Scenarios

Similar Messages

Maybe you are looking for