Partition couldn't be modified after uninstalling Windows consumer preview

I uninstalled Win Consumer Preview on my Macbook (Lion) using Bootcamp. An error showed up just as it got done. Since then, the Partition couldn't be modified because it contains CoreStorage physical volume. Help!

Similar Messages

Outlook 2013 become black after intalling Windows Thecnical Preview

Outlook 2013 become black after installing Windows Technical Preview.
Outlook appears fully or partly black, and color comes back to normal where you point the cursor.

Hi,
Please follow the suggestion above to ask a question in Windows Technical Preview or
Outlook Forum
for more suggestion.
Personal suggestion, since there is a new installation for Windows Technical Preview, please restart your Windows machine to have a try.
Regards,
Winnie Liang
TechNet Community Support

Problem on early 2009 iMac with OS 10.5.8 500gb hdd after uninstalling Windows with boot camp there is still no more disc space available

I had a partioned HDD 250 gb Mac and 250 gb Windows. I have uninstalled Windows with boot camp but still dont have the extra 250 gb available. What to do now?

You need to remove the partition you created when you set up BootCamp.
http://www.macworld.com/article/1156195/delete_boot_camp.html

Osx wont boot after installing windows dev preview.

Hi. I recently added boot camp and windows 8 to my 2011 mbp 17". Ever since the install my computer wont boot osx unless i run disk utility and repair my mac partition. Then everything runs fine untill i go into windows again and then go back to osx. Thoughts?

mcwilliamsc wrote:
Do i need to make a clone or will my time machine backup work.
TimeMachine drives are not "hold the option key bootable" like a clone and with Lion there is only a "hold Command r" Recovery Partition on the same drive your trying to repair.
So to get a external source to boot Lion, you need to Carbon Copy Cloner Lion to a another new/blank Disk Utility HFS+ Journaled formatted drive. Disconnect your TimeMachine drive before doing anything and don't clone to it or everything will be erased, use another drive.
Once you have Lion cloned, hold option and boot from the Lion clone and test it out.
mcwilliamsc wrote:
I only have one external drive andni dont think a clone will fit.
Only clone to another drive with no data on it, don't clone to a partition, don't clone to a TimeMachine drive. Disconnect all other drives before cloning so you don't make a mistake.
mcwilliamsc wrote:
Also when you say c boot do you mean using a lion install disk as opposed to the install option when you boot into disk utility?
Your signature says you have 10.6.8, obviously there are no install disks for 10.7, however you can make some by "hold option" and clicking on Purchases in the MacAppStore and redownloading the Lion installer (but don't install)
Follow these directions to make multiple "hold c" bootable DVD copies of the Lion installer.
http://eggfreckles.net/notes/burning-a-lion-boot-disc/
Test the disks out, you can see it's just like the 10.6.8 installer disk with Disk Utility and everything.
With a Lion DVD one can install Lion AND the Lion Recvoery Partition on a new or totally erased drive, like we are about to do.
When you clone Lion, it only clones the Lion OS X partition, not the Lion Recovery Partition. So by totally erasing the entire disk and installing Lion from the DVD can the Lion Rececovery Partition and Lion OS X partition be restored and your GPT repaired and your firmware flushed.
So once you got a Lion clone disconnect it, then c boot from the DVD and erase your ENTIRE Lion internal drive, this means you have to select the drive makers name on the left, HFS+ journaled of course.
Once that is competed, install Lion fresh, this will create both the Lion OX partition and the Lion Recovery Partition.
When that is finished, don't bother booting into the fresh Lion install, simply option boot off the Lion clone and reverse clone onto the Lion OS X partition, this will place back Lion, all your programs and files just like before.
Then you should be back to normal, your GTP is fixed, EFI is fixed (reboot twice) and you have everything except the Windows bootcamp partition.

Problems logging on after installing Windows 10 Preview

I've been using Windows 7 and Office 2013 for some time and works well with our on premise Lync 2013 installation. over the weekend I upgraded my workstation to Windows 10 and have been reinstalling my apps and making notes of things that will need to be
looked at and I have a strange issue that Lync will not sign in at all.
I get the following in the Lync Logs, Windows 10 was a clean install not an upgrade. IP address etc all reconfigured the same and I can access the CSCP through the browser with out any problems.
Anyone got any ideas?
1 Login: FAIL (hr = 0x80ee001c)
Internal Server: Pool1.diti.lr.net:5061
External Server:
IsInternalAccessLocation: 1
   autoRetryByErrorCode=1
   withRescheduleHint=0
   withAutoRetrials=0
   Login failed with permanent error or no auto-retrials
1.1 Lync-autodiscovery: PASS
1.1.1 Get-NewWebTicket: PASS
1.1.1.1 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0D099E88 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]
1.1.1.2 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0E9B9F68,
context: WebRequest context@ :246078848
MethodType:4
ExecutionComplete? :0
Callback@ :1729887C
AsyncHResult:3d0000
TargetUri:https://pool1.diti.lr.net/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
1.1.1.3 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0E9B9F68,
context: WebRequest context@ :246078848
MethodType:4
ExecutionComplete? :1
Callback@ :1729887C
AsyncHResult:3d0000
TargetUri:https://pool1.diti.lr.net/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
.: Lister :.

Hi Mike,
It is not recommend using Lync 2013
on Windows 10 , there are still many problems need to be solved.
Also, we do not get any relevant information whether or not the Lync 2013 supports Windows 10.
And the known issue for your reference.
•There are several known issues with screen sharing with Lync.
From
http://blogs.windows.com/bloggingwindows/2014/11/12/new-build-available-to-the-windows-insider-program/
Best regards,
Eric

How can I partition internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

I recently purchased MacBook Pro 13" (Late 2011) model with OS X v10.7.2 Lion installed. I've upgraded to OS X v10.7.3 Lion and updated all other software.
I require Windows 7 for some Windows based softwares that do not support Mac OS X. Therefore, used Boot Camp 4.0 to install Windows 7 and then tried partitioning single internal HDD to have 3 partitions (4 total including BOOTCAMP partition). Disk Utility created a 648.5MB partition and then I was able to create 3 other partitions of custom sizes. After applying these changes, I got an error message that said selected volume size is too small. I resized this 648.5MB partion to a custom size and had total 4 partitions, including BOOTCAMP.
After reapplying these changes, BOOTCAMP partition was removed and I was left with only 3 partitions and empty space.
I've tried several different ways to partition the disk, all in vein. Is there a way I can partition my single internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

You can't do what you want with GUI utilities, which will only allow a total of 4 partitions due to the limitation of MBR needed to support Windows. Those four partitions: EFI System (hidden), Mac OS, Recovery HD (hidden), Windows. So with Lion, you only get two visible partitions if you're going to use Windows with BootCamp. You can't make anymore with the included graphical tools.
If you need more partitions you'll need to use something like GPT fdisk (gdisk) to create the partitions in the GPT first. Then add the Windows partition only to the MBR and flag it as bootable. gdisk can be googled and downloaded for Mac OS X off sourceforge. It is not a GUI tool.
You should read this:
http://www.rodsbooks.com/gdisk/
And this:
http://www.rodsbooks.com/gdisk/hybrid.html

Installing Adobe CS6 on Windows 8 (2012) Consumer Preview

Hello,
First off, yes I know it isn't supported by Adobe (yet), however, I want to present to you my case for future users.
I have been investigating an issue I have ever since I got an Error 101 with Adobe Download Assistant where after extracting, I get an error from "Set-up.exe" that it failed to initalize. What is even more interesting is that CS5 trial can run smoothly.
PDApp.log:
5/23/2012 11:37:36 [INFO] Setup - Build Version - 6.0.335.0
5/23/2012 11:37:36 [INFO] Setup - Logging Level verbosity Set to 4
5/23/2012 11:37:36 [INFO] Setup - Start Adobe Setup
5/23/2012 11:37:36 [INFO] Setup - TimeLog: Bootstrapper Start
5/23/2012 11:37:36 [INFO] Setup - TimeLog: Start initial checks
5/23/2012 11:37:36 [INFO] Setup - Dictionary Path: G:\DesignWebPremium_CS6_LS16\Adobe CS6\resources\Dictionary\en_US\stringTable.zdct
5/23/2012 11:37:36 [INFO] PIM - Trying to access xml at path:G:\DesignWebPremium_CS6_LS16\Adobe CS6\resources\setup.xml
5/23/2012 11:37:36 [FATAL] PIM - Failed to load xml. system error:0
5/23/2012 11:37:36 [FATAL] Setup - Could not initialize ADXML object
5/23/2012 11:37:36 [FATAL] Setup - Unable to initialize. Error parsing setup.xml file
Meanwhile, the log even said that "Reboot is pending", and I have rebooted several times and also tried to find the registry key "InProgress" myself. There was no sign of that key anywhere.
Solutions I have tried:
Rebooted
Deleted Adobe OODE directory
Used Adobe CS cleaner tool
Redownloaded trial from Assistant Manager and directly from trial2.adobe.com
Checked to see I had enough disk space. (My partition has 250 GB left).
I am an admin, and ran the program under administrator.

I haven't seen any success trying to run CS5 or CS6 under Windows 8 Consumer Preview yet.
For CS6, It turns out that the whole problem was a corrupted .7z file from Adobe Download Assistant. I even downloaded the CS6 Master Collection .7z and the Web .7z directly with Chrome & IE 10. I don't know how they became corrupted in the first place with these many options.I managed to get it working from downloading the extracted files from another source. After that, every program worked, including Dreamweaver with no compatibility mode.
For CS5, it is also the corruption of the .7z file. Again solved by getting a unextracted source to get it working on Windows 8 Consumer Preview. CS5 works perfectly on my system too.
try in compatibility mode... even dreamweaver never opened directly in my windows consumer preview machine. after running compatibilty assistant and saving compatibility for xp-sp3 it worked perfectly
Simply, no.
Jeff, Adobe did well and I like the improvements the team made. I can tell you that the entire Adobe CS6 does work well with Windows 8 Consumer Preview (fully updated) smoothly.

My LaserJet CP1215 installed regularly in windows 8 consumer preview ...

... but doesn't appear connected!
And doesn't work at all. What shell i do ? I'm using it on a HP-Pavilion System Model KC887AA-ABZ a6270.it System Type X86-based PC Processor AMD Athlon(tm) 64 X2 Dual Core Processor 5000+, 2600 Mhz, 2 Core(s), 2 Logical Processor(s)

Hello!
HP understands that Microsoft has released a Windows 8 Consumer Preview (Beta) version. HP is not currently supporting any Windows Consumer Preview (Beta) operating system versions. If you have any questions about the Windows 8 Consumer Preview (Beta), may I refer you to Microsoft's website at: www.microsoft.com?
I work for HP.
I work for HP.

Uninstalling Windows via Boot Camp, still partitioning after roughly 1 hour

Hi,
This is my first post, but I'm a long time searcher. I usually find what I'm looking for, but in this case I thought best to ask. I hope I follow the correct etiquette!
So today I thought I would have a go at installing Windows XP via Boot Camp on my MacBook Pro. To cut a long story short, I completely messed it up because I (stupidly) read SP1 instead of SP2 on the CD and essentially it didn't install anything from the boot CD's -- as you would expect.
So after a quick panic I got back running in OS, and have now just tried to uninstall windows using Boot Camp, following the correct instructions, and after around an hour now it's status is still reading: Partitioning disk.....
Is this to be expected, or is this wrong? Initially I only partitioned 32Gb for Windows as I didn't really want to do anything with it.
I have done a few searches and got some mixed answers - ranging from it should be instantaneous, to it could take an hour.
What should I do next?
Thanks in advance.

Well......First, I should say that although I've used Macs for many years I'm not an expert by any means. So, take my advice with caution.
In some ways it seems like, without a full backup, you are sort of between a rock and a hard place =-( I'm not sure what will happen if you force quit the Boot Camp repartitioning. It might be o.k. and it might bugger up your hard drive and require you to reinstall everything. I'm not sure what effect "ejecting" the Windows partition would have.
I guess at some point you're just going to have to do something. When I get to a point where I am in a situation like you are I search the Internet for as much information as I can get. If I can't find a specific answer to my problem at least I usually get some idea of what to try. Then I just go ahead and start trying things. When you get into that situation it is much less stressful if you have a complete backup. (It's really worth spending the money to buy an external hard drive and start using Time Machine to make a backup.)
I know that my answer is not much help. Sorry about that. Maybe someone else will chime in with some more useful information. If they don't I guess that you're just going to have to take a plunge =-(

Windows 7 startup error after uninstall of Photosmart 6510

After uninstalling Photosmart 6510 and software, get error message: "There was a problem starting C:\Program Files\HP\HP Photosmart 6510 series\bin\HPStatusBL.dll" when Windows 7 starts up.

Sounds like the software was not completely removed (or atleast Windows still is looking for something). Microsoft make a tool that should be able to help, it is called FixIt. Click the link below for more details:
http://support.microsoft.com/mats/Program_Install_and_Uninstall/
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?

Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling

Create 3rd partition after installing Windows 7 on Macbook Pro (Lion preinstalled)?

Hi, currently I'm having 2 partition: Macintosh HD - Lion (~680GB) and Bootcamp - Windows 7 (~60GB). Now I want to take ~600GB from the 1st partition to create a FAT32 data storage. My question is: is it possible to do so without reinstalling any OS?

Do not add a partition after BootCamp. BootCamp manipulates the boot-sector of a Mac disk to allow dual-booting. But manually adding a third partition will break that tenuous multi-boot balance.
Many threads posted by people who need to restore OSX from a backup and lose their BootCamp data due to system instability attest to the tourble you can cause.
Buy an external drive and use that for FAT32 (or EXFAT to allow files larger than 4 GB) storage.

Adobe reader shows a horizontal empty window in OSX 10.9.3 after uninstalling Acrobat 8. How to get rid of it?

Adobe reader shows a horizontal empty window in OSX 10.9.3 after uninstalling Acrobat 8. How to get rid of it?

Macintosh HD > Library > Internet Plug-ins
Look for these two files.
AdobePDFViewerNPAPI.plugin
AdobePDFViewer.plugin
Right click on those and select “Move To Trash”.
Restart the computer.

After uninstalling/installing itunes I get this window 16 bit MS-DOS Subsystem The NTVDM CPU has encountered an illegal instruction CS:05aa IP:0480 OP: 6300 72006f Choose close to terminate. Neither ignore or close works

After uninstalling/installing itunes ( there was a problem with an upgrade) the following window appears on my account page
16 MS-DOS Subsystem
The NTVDM CPU has encountered an illegal instruction CS:05aa IP: 0480 OP:6300 72006f Choose close to terminate application. Neither close or ignore works. I don't know where to turn for help I'm using Windows 7. Thx

Hi there,
I am also experiencing this problem, but with 1.4.2_06. Last week (late Jan 2005) the dynamic versioning was working fine, downloading and installing the latest version of Java as required.
However now (early Feb 2005), I am finding that after downloading the latest version of Java and beginning the install, I am getting this error.
I was hoping that you may have heard of a cause or solution for this problem?
Many thanks

How do I uninstall Windows 7 and undo my partition?

How do I uninstall Windows 7 and undo my partition? I don't use Windows 7 anymore and would like the space back.

Partition is gone but my computer is sitll trying to boot to the window sides (it did this automatically before). It works fine when I hit the Option key and select the Mac (the only option), but do you know why it would still try and boot to the other side. I just got a black screen that told me to insert a disk.

Partition couldn't be modified after uninstalling Windows consumer preview

Similar Messages

Maybe you are looking for