Partition error, troubleshooting has been unsuccessful.

Like many before me, whenever I attempt to partition my hard drive using boot camp, I recieve the "Files cannot be moved" error message. After troubleshooting online for a couple of days, I'm still nowhere. I've download iDefrag and defragmented the disk, and have removed any large files that could have caused the error, yet, I still get the same message when I try and partition my HD again. I don't see any point in reformatting the disk like the error message asks as my HD is already in the extended journaled version, and I already defragmented the disk.
What else can I do? Is there some other benefit to reformatting the disk that I'm unaware of? I'll admit that my computer knowledge is limited, but I do consider myself somewhat useful.
For reference, I'm using a Macbook Pro 2011, 8gb ram, 750gb HD, running Lion.
Reponses are very much appreciated. Options that don't include reinstalling the OS would be great, but I know that it might be the only option at this point...

Shrink the partition then try
The error and reason to erase and restore - preferably from a clone - is to consolidate ALL free space into one contiguous chunk.
iDefrag works best when run from and booted from another hard drive where it is free to work, not from the same. IOW, boot from your backup clone. And the #1 step is to backup before doing anything.
I prefer to have bootable backups in addition to any other type backup.
Multiple sets, redundant, and so if a drive or one set fails, if TimeMachine dies I have another set.
Before Lion the user had to insure that they had an emergency boot partition to perform repairs and mainteance, or use a DVD which is limited, older version, or use fsck and Safe Boot.
Shrink
Repair
Resize again to extend the partition
Personally I like to do the above knowing I have bootable backup, doing it from another drive rather than "pick yourself up by your own bootstraps"
Some methods work for some but not 100% and consistent for everyone.
They are all just tools and techniques.
Cloning - superduper, carbon copy cloner, Clone X 4, etc
defrag programs like iDefrag and iPartition
Shrinking partition
Repair the boot drive (from your Lion Recovery )
Paragon CampTune 9.5.x also ($19, resizes partition between Windows and Mac also)

Similar Messages

  • I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?

    I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?

    The 2nd generation can not be upgraded beyond 4.2.1.

  • Firefox has been unsuccessfully attempting to download a software update for a few days now... What's the problem?

    Firefox has been unsuccessfully attempting to download a software update for a few days now... What’s the problem?

    If you have problems with updating then easiest is to download the full version and uninstall the currently installed version.<br />
    You may need to remove the Firefox program folder to do a clean install of the new version.
    Do a clean (re-)install:
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Do not remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • ESS Time Sheet Entry Error - "critical error, data has been lost"

    I tried saving his time sheet data on the ESS . I noticed that when I went back to check on the draft, Draft has no longer exists  or had any information. When I tried to find the draft, I got the message "critical error, data has been lost"
    Can any one help on this issue if faced.

    Hello,,
    Are you able to enter time on the backend via Cat2, for example?
    Please provide further details for the community to assist you.
    Details like:
    - Which ERP version are you running?
    - Do I have any dumps or logs on ST22 and SLG1?
    Thank you.

  • I try to run a SSIS 2012 package a come with this error Exception has been thrown by the target of an invocation.

    Hi,,
    I making a package in SSIS 2012 that read a Excel file and copy the data into a Excel Destination , I did via Scrip Task using VB 2010 (Visual Studio 2010) the package stop with these error, I try to solve but I don't know, any clue ??
    Thanks
    I execute a SSIS package copy data from a Excel workbook to another using a VB scrip, it show with this error
    Exception has been thrown by the target of an invocation. Also appears this : at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes,
    RuntimeType typeOwner)   at System.RuntimeMethodHandle.InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeType typeOwner)   at System.Reflection.RuntimeMethodInfo.Invoke(Object
    obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo
    culture)   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)   at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
    An the package stop , I wan to know really what is happened?, any one please

    >Exception has been thrown by the target of an invocation
    In your script taks you need to "unwrap" this exception by examining its .InnerException.  An easy way is to catch TargetInocationException and re-throw its .InnerException.
    David
    David http://blogs.msdn.com/b/dbrowne/

  • Script task error: exception has been thrown by the target of an invocation

    Hi, 
    I have a script task which find the sheet name in an excel and assigned it to variable, this package works perfect while executing using BIDS but when I try to execute it using project deployment it throws the error.
    Script task error: exception has been thrown by the target of an invocation

    Hi Shoaib,
    You use the Microsoft.Office.Interop.Excel namespace in the Script Task, right? If so, please check whether you can find the Microsoft.Office.Interop.Excel.dll in the following folder on the SSIS server:
    %ProgramFiles%\Microsoft Visual Studio XX.X\Visual Studio Tools for Office\PIA\OfficeXX
    (or %ProgramFiles(x86)%\Microsoft Visual Studio XX.X\Visual Studio Tools for Office\PIA\OfficeXX on 64-bit operating systems)
    To install Office primary interop assemblies (PIAs), you can use one of the following methods:
    Install the .NET Programmability Support feature when installing Microsoft Office.
    Install the
    Microsoft Office 2010: Primary Interop Assemblies Redistributable.
    Regards,
    Mike Yin
    TechNet Community Support

  • Login Error: Exception Has been thrown by the target of an invocation

    Hi Guys
    When i am trying to Validate the Logic in BPC Admin its giving the the above error.
    Login Error: Exception Has been thrown by the target of an invocation
    can anyone tell me why.
    Thanks
    Narsi
    Osoft
    SA

    HI Thanks for u r Reply.
    The error is cleared.  Just i cleared the System Log in the EventViwer.
    THen i refreshed. Then its working fine.
    Thanks
    Narsi
    SAP BPC Consultant
    Outlooksoft SA
    0027-787082639

  • The error threshold has been exceeded. The receive location is shutting down

    I am doing polling using SQL adapter......For small records polling is succesful......but for large recorde i am getting following error..
    The receive location "RcvSqlDataLoc" with URL "" is shutting down. Details:"The error threshold has been exceeded. The receive location is shutting down.".

    Hi
    You might have resolved this issue, However I would not read all those records in one go! Instead I would read them in batches and pass to BizTalk.
    I would use
    Scatter and Gather Pattern to distribute the records to multiple orchestration instance for processing and execute them using more than one BizTalk host instance?
    If you have already resolved the issue, Then it would be great if you share the solution with us!
    HTH,
    Naushad Alam (MCC,MCTS,BizTalk Server)
    If this is helpful or answers your question - please
    mark accordingly!
    alamnaushad.wordpress.com|
    My new TechNet Wiki
    "BizTalk Server: Performance Tuning & Optimization"

  • Error workflow has been created successfully, but failed to publish and will not be listed in the Project Center

    hello,
    when i try creating projects in Project center am posted on with this error.
    Your new XXXX workflow has been created successfully, but
    failed to publish and will not be listed in the Project Center.For more information on the failure, visit the My Queue Jobs page or contact your administrator.
    Any help would be appreciated!!!!!
    Thanks regards, Vignesh.

    hello Rouyre,
    Thanks for ur reply
    Am using 
    Microsoft Project Server 2013
    15.0.4420.1017
    Yes! It is Custom EPT with Custom Workflow(Declarative Workflow) built through VS2012
    after associating the Site workflow with EPT i try creating Projects using my Custom EPT since then am posted on with this error.
    ULS Error:Log
    07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
    0x06B8 Project Server                
    Queue                        
    ad3fy Critical
    Standard Information:PSI Entry Point: <unknown>  Project User: <unknown>  Correlation Id: <unknown>  PWA Site URL:   SA Name: <unknown>  PSError: <unknown> A queue job has failed. This is a general
    error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued jobs) and the trace log
    (which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 39cd36d6-3603-e411-b33e-00155d00091f. Name of the computer that processed this job: 3eebbc1d-7558-4050-bf5d-d985b23b89f5 (to debug further,
    you need to look at the trace log from this computer). Failed job type: ReportWorkflowProj...
    2c1ea19c-5849-002d-b89f-50aaf0a752fd
    07/04/2014 10:21:38.03* Microsoft.Office.Project.Server (0x1840)
    0x06B8 Project Server                
    Queue                        
    ad3fy Critical
    ...ectDataSync. Failed sub-job type: ReportWorkflowProjectDataSyncMessage. Failed sub-job ID: 1. Stage where sub-job failed:  (this is useful when one sub-job has more than one logical processing stages).
    2c1ea19c-5849-002d-b89f-50aaf0a752fd
    07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
    0x06B8 Project Server                
    Queue Jobs                    
    ad3fy Medium  
    Error is: GeneralQueueJobFailed. Details: Queue Attributes:  39cd36d6-3603-e411-b33e-00155d00091f  3eebbc1d-7558-4050-bf5d-d985b23b89f5  ReportWorkflowProjectDataSync  ReportWorkflowProjectDataSyncMessage  1    2c1ea19c-5849-002d-b89f-50aaf0a752fd
     . Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified.
    2c1ea19c-5849-002d-b89f-50aaf0a752fd
    07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
    0x06B8 Project Server                
    Project Server Database      
    ah91z Medium  
    Successfully got the connection string (database name=[ProjectWebApp_Practice], id=1f6004ae-5d8a-41d2-81f9-e424a31484aa, type=Consolidated). Requested access level=ReadWrite: Data Source=XXXX;Initial Catalog=ProjectWebApp_Practice;Integrated Security=True;Enlist=False;Pooling=True;Min
    Pool Size=0;Max Pool Size=100;Connect Timeout=15
    2c1ea19c-5849-002d-b89f-50aaf0a752fd
    07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
    0x06B8 Project Server                
    Queue Jobs                    
    ad3fz Medium  
    PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f type = ReportWorkflowProjectDataSync aborted at
    Message 1, LogLevelManager Warning-ulsID:0x000DD159 has no entities explicitly specified.
    2c1ea19c-5849-002d-b89f-50aaf0a752fd
    07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
    0x06B8 Project Server                
    Queue Jobs                    
    ad3f2 Medium  
    PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f correlation 82705dc5-3603-e411-b33e-00155d00091f
    type = ReportWorkflowProjectDataSync failed at Message 1 Errors: GeneralQueueJobFailed, LogLevelManager Warning-ulsID:0x000DD15C has no entities explicitly specified.
    2c1ea19c-5849-002d-b89f-50aaf0a752fd
    Thanks regards, Vignesh.

  • Firefox does not work after update, all troubleshooting has been completed. Nothing can be clicked, not even the options in firefox.

    I am unable to use firefox after the latest update. All troubleshooting methods listed on the website has been tried. I am unable to click anything in the firefox, tabs don't work, options don't work, unable to launch diagnotics, help or anything from firefox. Basically, I am unable to access anything within firefox.

    Did you try a new profile?
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 23: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Exchange Provisioning - Error (User Has been deleted from AD)

    Hello Experts,
    User has been provisioned to AD successfully and I verified it manually by logging into AD server. But when I provision Exchange to User "Create Mailbox" task failed with the following error message "User Has been Deleted from AD".
    I am wondering what causing this issue? Can u assist me?
    Thanks & Regards
    INIYA

    Exchange provisioning task "Get Object GUID" returns "Value not set" . Is this the reason for the above error?
    Seems like AD provisioning process is creating user in AD but not setting Object GUID. Any idea how to resolve this?

  • Error Record has been deleted. Your request cannot be processed

    Hi Team,
    We are planning to integrate apps scema with our separate schema by calling oe_order_pub.process_order API,
    While calling this API we are getting error like creation process :"Record has been deleted. Your request cannot be processed."
    As pe my observation i found below vaariable causes the issue.
    l_line_tbl (i).operation := OE_GLOBALS.G_OPR_CREATE;
    Please help.

    I have passed the Lock control = 1 at the header level. Still getting the same error.
    Record has been deleted. Your request cannot be processed.
    --Prasanth                                                                                                                                                                                                                                                                                                                                                   

  • Nokia Photos error : exception has been thrown by ...

    I have two computers and installed on both Nokia Photos. On the Vista-Home PC I get the error message. The first time I ran Nokia Photos there was no problem. The phone synchronized ok. The second time it crashed and it keeps on crashing as soon I (re0 start the program.
    My phone is a N82.
    The XP-professional computer is ok. The problem does not occur.
    Anybody know how to solve this problem ?
    Re-installing did not solve the prooblem, neither using Nseries suite 1.6 or 2.0. I tried both......
    Please help. Thanks.
    Solved!
    Go to Solution.

    Hi,
    I too have recently purchased an N95 8GB and have tried using the latest Nokia Photo Software.
    I have downloaded the latest version from the website only yesterday (19th July 2008 - Version 1.2.50.00) along with the latest version of the PC Suite Software (Version 7.0.7.0). The software appeared to open fine, and started to import all 23,000 items from my previous Lifeblog Software. When it eventually finished it said it had encountered errors and then listed them, and then another error occured stating that a more detailed report was in the Windows Error log, and closed the program.
    I have tried reinstalling the program, running reg scans to completely remove it, and have even renamed my lifeblog database however still loads the old import and then crashes with the same issue. Error log in Event Viewer is as follows.
    The description for Event ID ( 100 ) in Source ( Nokia Photos ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Title:NokiaPhotos Exception Handling
    Timestamp: 20/07/2008 14:33:45
    Message: HandlingInstanceID: db81c119-ab91-434a-b0ac-3e41a8c15afa
    An exception of type 'System.Reflection.TargetInvocationException' occurred and was caught.
    07/20/2008 15:33:45
    Type : System.Reflection.TargetInvocationException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Message : Exception has been thrown by the target of an invocation.
    Source : mscorlib
    Help link :
    Data : System.Collections.ListDictionaryInternal
    TargetSite : System.Object _InvokeMethodFast(System.Object, System.Object[], System.SignatureStruct ByRef, System.Reflection.MethodAttributes, System.RuntimeTypeHandle)
    Stack Trace : at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
    at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
    at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
    at System.Delegate.DynamicInvokeImpl(Object[] args)
    at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
    at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
    at System.Windows.Threading.DispatcherOperation.InvokeImpl()
    at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state)
    at System.Threading.ExecutionContext.runTryCode(Object userData)
    at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
    at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
    at System.Windows.Threading.DispatcherOperation.Invoke()
    at System.Windows.Threading.Dispatcher.ProcessQueue()
    at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
    at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
    at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
    at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
    at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
    at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Boolean isSingleParameter)
    at System.Windows.Threading.Dispatcher.Invoke(DispatcherPriority priority, Delegate method, Object arg)
    at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
    at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
    at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
    at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame)
    at System.Windows.Threading.Dispatcher.Run()
    at System.Windows.Application.RunInternal(Window window)
    at System.Windows.Application.Run(Window window)
    at System.Windows.Application.Run()
    at Nokia.NokiaPhotos.SingleInstanceManager.OnStartup(StartupEventArgs e)
    at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
    at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
    at Nokia.NokiaPhotos.EntryPoint.Main(String[] args)
    Additional Info:
    MachineName : PANMAIN
    TimeStamp : 20/07/2008 14:33:45
    FullName : Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    AppDomainName : NokiaPhotos2.exe
    ThreadIdentity : PANMAIN\Paul
    WindowsIdentity : PANMAIN\Paul
    Inner Exception
    Type : System.Reflection.TargetInvocationException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Message : Exception has been thrown by the target of an invocation.
    Source : mscorlib
    Help link :
    Data : System.Collections.ListDictionaryInternal
    TargetSite : System.Object _InvokeMethodFast(System.Object, System.Object[], System.SignatureStruct ByRef, System.Reflection.MethodAttributes, System.RuntimeTypeHandle)
    Stack Trace : at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
    at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
    at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
    at System.Delegate.DynamicInvokeImpl(Object[] args)
    at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
    at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
    at System.Windows.Threading.DispatcherOperation.InvokeImpl()
    at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state)
    at System.Threading.ExecutionContext.runTryCode(Object userData)
    at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
    at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
    at System.Windows.Threading.DispatcherOperation.Invoke()
    at System.Windows.Threading.Dispatcher.ProcessQueue()
    at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
    at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
    at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
    at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
    at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
    at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Boolean isSingleParameter)
    at System.Windows.Threading.Dispatcher.Invoke(DispatcherPriority priority, Delegate method, Object arg)
    at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
    at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
    at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
    at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame)
    at System.Windows.Window.ShowHelper(Object booleanBox)
    at System.Windows.Window.Show()
    at System.Windows.Window.ShowDialog()
    at Nokia.NokiaPhotos.Dialogs.NPMessageBox.Show(String messageBoxText, String caption, MessageBoxButton but, ENPMessageBoxIcon icon)
    at Nokia.NokiaPhotos.Controllers.NPFirstRunController.Init()
    at Nokia.NokiaPhotos.MainWindow.LoadMainWindow()
    Inner Exception
    Type : System.Runtime.InteropServices.COMException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Message :
    [1,40] Unknown token: "Isle of Skye 牤㕡2 ǁ
    51002
    c:\build_c\workdir\mplatform_1_6\mdatastore\QueryParser\MQueryParser.h
    33
    MParseQuery
    links to Tag as mt where mt.Title LIKE "Isle of Skye 牤㕡2 ǁ
    토ѷ瑯獯潨⁰⸳0䈸䵉Є" AND mt.ItemType="application/vnd.nokia.mde.tag"
    Stacktrace.
    1005
    c:\build_c\workdir\mplatform_1_6\mdatastore\QueryParser\MQueryParser.h
    48
    MParseQuery
    Stacktrace.
    1005
    .\MDataStoreObj.cpp
    1434
    CMDataStore::GetImpl
    Stacktrace.
    1005
    .\MDataStoreObj.cpp
    1305
    CMDataStore::Get
    Source : MDataStore.MDataStore.1
    Help link :
    ErrorCode : -2147197613
    Data : System.Collections.ListDictionaryInternal
    TargetSite : Nokia.MPlatform.MItems.MEnum Get(System.String, System.Object, System.Object)
    Stack Trace : at Nokia.MPlatform.MDataStore.MDataStoreClass.Get(String bstrItemType, Object varQuery, Object varOrdering)
    at Nokia.NokiaPhotos.Controllers.NPContentController.GetItemCount(String itemtype, String query, String orderby, ENPViewTypeFilter viewType, IMDataStore datastore)
    at Nokia.NokiaPhotos.Controllers.NPTagController.ReadTagsFromDatabase()
    at Nokia.NokiaPhotos.Controllers.NPTagController..ctor()
    at Nokia.NokiaPhotos.Windows.TagManager.InitPageMembers()
    Process Id: 3820
    Process Name: C:\Program Files\Nokia\Nokia Photos\NokiaPhotos2.exe
    Win32 Thread Id: 308
    Thread Name: MainApplicationUIThread
    Category: General
    Priority: 0
    EventId: 100
    Severity: Error
    Machine: PANMAIN
    Application Domain: NokiaPhotos2.exe
    Extended Properties: .
    Any help would be appreciated as i do use the lifeblog software on a regular basis.
    Thanks
    Paul

  • Runtime error Exception has been thrown by the target of an invocation" from Script task

    I have a SSIS package with a script task, I get
    the following error when i try to run it in my local system. It works fine for my collegues as well as in production. However, I am not able to run it locally, to test. I keep a debug point in the main method, but it is never reached, I get the error before
    it goes to main method.
    I am using VS 2010, .Net framework 4.5.
    The script task does compile. I get the following messages SSIS package "..\Test.dtsx" starting. Error: 0x1 at Test: Exception has been thrown by the target of an invocation. Task failed: Test SSIS package "..\Test.dtsx" finished: Success.
    The program '[2552] DtsDebugHost.exe: DTS' has exited with code 0 (0x0).

    The following is the code:
    public void Main()
    try
     LogMessages("Update Bug package execution started at :: " + DateTime.Now.ToLongTimeString());
     LogMessages("Loading package configuration values to local variables.");
    strDBConn = Dts.Variables["User::DBConnection"] != null ? Dts.Variables["User::DBConnection"].Value.ToString() : string.Empty;
    strTPCUrl = Dts.Variables["User::TPCUrl"] != null ? Dts.Variables["User::TPCUrl"].Value.ToString() : string.Empty;
    TfsTeamProjectCollection objTPC = new TfsTeamProjectCollection(new Uri(strTPCUrl));
    WorkItemStore objWIS = new WorkItemStore(objTPC);
    WorkItemCollection objWIC = objWIS.Query("SELECT...");
    foreach (WorkItem wi in objWIC)
    catch(Exception ex)
    When I commented the code from TfsTeamProjectCollection objTPC = new TfsTeamProjectCollection(new Uri(strTPCUrl)); The script executes successfully. However, if i keep TfsTeamProjectCollection objTPC = new TfsTeamProjectCollection(new Uri(strTPCUrl));
    and comment the rest, i get the exception.
    I do have access to the URL

  • TS3988 Whenever I attempt to backup to icould, it never completes.  It gives the error:  backup has been unable to complete.

    I cannot backup my iphone 4 to my icloud.  It begins, then stops and displays that the backup has not been completed.  Any advice???

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iCloud: Troubleshooting creating backups
    http://support.apple.com/kb/ts3992
    -Griff W.

Maybe you are looking for