Partition Failed for OCZ-AGILITY3 as a second HDD

Hi,
I replace OCZ-AGILITY3 with CD-ROM as a second drive.
The HDD was from my previous Windows Laptop. When I insert it, everything was fine and
worked properly. But when I decided to erase everything and format the HDD I faced with
problems. I pressed the Apply into the DIsk Utility's Erase menu and were receiving error
continiously that was:
"Wiping volume data to prevent future accidental probing failed."
But It has done I believe ,because everythings deleted as I see and all data wiped.
But after that the format type for HDD is : unformatted , however it was Windows NT File System
at the begining.
Now, When I'm trying to erase or partitioning OCZ HDD I face with same error. Here is the image:
I really don't want to take the HDD out from the laptop, please suggest a solution
to solve this here
I couldn't find any similar software like : Partition Magic or .... for MAC OS and
also I tried through Windows OS which is installed with VMWare Fusion but
nothing
Please help !

Any help?

Similar Messages

Partition fail for new SSD

My old HD crashed on my MacBook Pro (mid 2009) a few days ago. Took it to the Apple store and they told me to buy a new one and put it in. I've done this before, wasn't as complicated the first time around. I bought a Seagate 240gb SSD (so I don't have a moving parts malfunction again) and replaced my old HD. When I try and boot from any source, my latest Time Machine backup (10.7.5), the Max OS X Install Disk (10.5.7), or any of the steps I have found online I cannot get it to work. So I have tried to 'format' the HD by going to Disk Utility and trying to Partition the drive. When doing this on the computer through the Install Disk I get an error that says that the "input/output error". Bummer, I don't know what that means. Then I tried to do it as a Target Disc from another Mac and the Partition fail for that said 'partition failed to write to write to the last block'. I'm stuck at this point. I have no idea what to do, all I want to do is get OS X on my computer. I don't care about data at this point, I just want to load a fresh start. Any help would be great. Below are some of the details from my computer that I can remember (since I can't look them up anymore);
MacBook Pro 13" (mid 2009; Intel2 Core duo)
8GB RAM
240GB Seagate SSD HD

if you don't want to run in any errors, just set up win7 first . it creates a 100mb (boot?) partition, one for the system and around 1MB free space (don't ask me why).
grub itself doesn't recognizes the windows installation but its easy to edit the file. i think you just have to change the partition that it directs to window's boot partition (/dev/sda1 in my case)
mine is looking like this:
## (2) Windows
menuentry "Windows" { set root=(hd0,1)
chainloader +1

Second HDD in Satellite X200-21K (PSPBUE)

I'm looking for some informations about installing second HDD into my laptop.
Laptop does have an "empty/spare" bay for second HDD, but there are no disk connectors in bay. So there is no easy way for upgrading.
So I've looked over the net, and as far as i know i have two options:
1) Buy appropriate hdd connectors and 2.5" HDD. Take appart my laptop, connect cables onto motherboard and install second HDD in empty bay.
Q1) Does X200-21K motherboard have second (spare) SATA connector? I assume that motherboard have only two SATA connectors (one for HDD, and one for DVD).
Q2) Is possible to connect two hard drrives onto one SATA motherboard connector?
2) Replace DVD with HDD
Q1) Is this possible? Did someone alreary replaced DVD with HDD?
I've seen on internet that this is possible on MacBook, and on some other laptops/notebook (HP,...)
Thanks for answers
PL

hi petrusko_1,
i cant believer that there is space for a second hdd without connector...are you sure?
can you upload a picture?
- to your first question: do you have the whole number at hands (starting with PSPBUE-)?
this number indicates what hardware/software is inside (ram, hdd, grafics etc)
- second one with the sata issue: one connector = one drive
if you are shure that there is only one connector in your machine you wont be able to connect 2 drives to this single connector.
soldering another connector to the mainboard is dangerous and its doubtful that it will work afterwards....
your idea with using the second connector of the odd (optical disk drive) isnt bad...
maybe it is a baymodule available where you can put in the sec. hdd and install it to the odd bay....
btw: the sata controller doesnt care if there is a hdd or odd attached....

Partition failed with the error: The target Core Storage volume is locked

partition failed with the error: The target Core Storage volume is locked
Hello everybody!
Please help me.
I'm using MacBook Pro (Retina, 13-inch, Mid 2014), Processer:2.6 GHz Intel Core i5, Memory: 8 GB 1600 MHz DDR3.
my computer i have divided in 3 drives: 1-Machintosh HD (Mac OS) 2-Bootcamp (Window OS) & 3-Data (drive for data storage).
I don't want to use Window OS on my computer anymore so I decided to delete drive Data (the third drive) & Window OS (the second drive).
I want my hard drive become a single drive back but when I was formatting, there were some problem display:
then i clicked ok and it displayed like this:
then i try to format or create new partition, it's nothing happen when press button apply.
my computer has storage space 256GB but now when it is happened like this my storage space is only 127GB only.
so please help me.. what so I do with this problem.
Thank you.!

arajs wrote:
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!
This is a standard error message.
If you would have checked into the bootcamp forum you would have instantly found the solution.
http://discussions.apple.com/forum.jspa?forumID=1244&start=0
All that error message means is that you do not have enough conguous disk space available. No big deal at all for an older system. You have bits of files strewn over the "free space."
The solution as you would find in the bootcamp forum is to clone your HD, using a file-file clone, then test the clone to be sure it is working and then to erase your HD and clone back.
Works every time.
Message was edited by: Theodore

Win2008 R2 Backup Failure: Volume Shadow copy operation failed for backup volumes with following error code "2155348254"

Failed to get exclusive lock on the Extensible Firmware Interface (EFI) system partition.
[ Name] Microsoft-Windows-Backup
   [ Guid] {1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}
   EventID 517
   Version 0
   Level 2
   Task 0
   Opcode 0
   Keywords 0x8000000000000000
- TimeCreated
   [ SystemTime] 2012-09-13T02:01:26.193377500Z
   EventRecordID 134130
   Correlation
- Execution
   [ ProcessID] 13508
   [ ThreadID] 552
   Channel Application
   Computer SERVER.srv.local
- Security
   [ UserID] S-1-5-17
- EventData
BackupTime 2012-09-13T02:00:15.711673900Z
ErrorCode 2155348254
ErrorMessage %%2155348254

Shaon,
I am receiving an identical error message as the original poster.
Let me give you some information on my setup and what I have already tried.
I am running a Windows Server 2008 R2 domain controller with SP1 installed. The system also runs MS SQL 2008 and IIS. All critical and recommended updates are installed.
The server backs up to a set of one of two external hard drives over USB 2.0 every night using Windows Backup. The external hard drives are encrypted using BitLocker and rotated offsite every week. We had no problems until 27 November 2013. On
that date I installed the November Windows updates and rebooted. Backups have not worked correctly since that time.
The server has two hard drives. The first one contains an 100 MB EFI partition (created for the IBM System x3200 M3 server EFI hardware although it appears to be entirely empty). The second partition contains the OS and the SQL databases. The
second hard drive contains shared data files. None of the partitions are close to being full.
The backup fails with the following error in the Windows Backup interface:
EFI System Partition: Windows Server Backup failed to get an exclusive lock on the EFI system partition. Detailed error: Access is denied.
The event viewer contains the error listed by the original poster (in the detailed view). The general view has this description:
The backup operation that started at <time> has failed with the following error code '2155348254' (Windows Backup failed to get an exclusive lock on the EFI system partition (ESP). This may happen if another application is using files on the
ESP. Please retry the operation.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
This error is thrown about 1 minute after the backup begins. After encountering the error with the EFI partition the backup exits and does not attempt to backup the other partitions.
The most interesting detail about the problem is that if I reboot the server and immediately perform a backup it completes successfully. If I reboot the server and wait approximately an hour before starting the backup it will fail. The backups
will continue to fail until the server is rebooted, at which point I if a backup is started immediately it will succeed but all future backups will fail. Therefore, it seems that Windows Backup has access to the EFI partition immediately after a reboot
but loses access for some reason close to the hour mark (this is an estimate based on a little experimentation but not an exact number).
Reading the little bit of information available online for this error message I have tried disabling our antivirus (Kaspersky) with no effect. I have also replaced the first hard drive in the server that contains the EFI partition with not effect (the
old hard drive imaged to the new hard drive with no errors, but backups still fail with the new hard drive). Backups fail with either external hard drive connected, so it is unlikely that the external hard drive is the problem. I have erased all
the Windows Backup settings including wiping all data on the external backup drive and created a new backup with no effect. I attempted to not backing up the EFI partition but it is required for the system state. I have reviewed all the Windows
updates installed in 27 November 2013 but none of the KB articles reference anything that I could possibly see related to the backup except for possibly the installation of .NET 4.5.1. However, I do not believe that Windows Backup uses .NET. 'Vssadmin
list writers' does not list any obvious errors.
At this point I am stymied except to think that I have some esoteric hardware failure. I have contacted IBM support who ran an extensive hardware diagnostic which showed no hardware issues.
I run several other similar Windows Server 2008 R2 systems, but none of them are on this model of hardware and none of them have an EFI partition. They all installed the same November Windows Updates. All of them are able to backup to external
hard drives without issue.
Any support you can provide would be greatly appreciated.

ORA-00313: open failed for members of log group 2 of thread 1

We have a 4 node 32bit linux RAC (Dell/EMC) system running 9.2.0.4. It is very stable but over the past couple of months we've encountered a few ORA-00313 errors, while the system is running.
No patterns. Different loads, times of day, nodes.
The redo can't be opened, the node crashes, we look for errors, can't find any and then restart. The file is there and the permissions are fine. No other processes are accessing the files. No other Db errors. No O/S, SAN, Fiber, errors.
All the research I've done shows that this is an error you'd only get on startup.
We're going to log a TAR, but I can't believe we're the only ones to ever see this occur.
[directory and server names have been modified to protect the system. Don't get hung up on typos or possible file system config problems too much - this system has been and is running now]
======================================================
Log entries:
Mon Oct 24 22:51:58 2005
Errors in file /u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/sampledb/redo0/oradata/sampdb/redo/redo102.log'
ORA-27041: unable to open file
Linux Error: 13: Permission denied
Additional information: 2
Mon Oct 24 22:51:58 2005
Errors in file /u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/sampledb/redo0/oradata/sampdb/redo/redo102.log'
ORA-27041: unable to open file
Linux Error: 13: Permission denied
Additional information: 2
Mon Oct 24 22:51:58 2005
LGWR: terminating instance due to error 313
Below are the contents of the trace file mentioned in the above log:
trace file /u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc:
[oracle@db1 bdump]$ more /u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc
/u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, Real Application Clusters, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
ORACLE_HOME = /u01/app/oracle/product/920
System name: Linux
Node name: db1.sample.com
Release: 2.4.9-e.59enterprise
Version: #1 SMP Mon Jan 17 07:02:16 EST 2005
Machine: i686
Instance name: sampdb1
Redo thread mounted by this instance: 0 <none>
Oracle process number: 24
Unix process pid: 2237, image: [email protected] (LGWR)
*** SESSION ID:(25.1) 2005-10-11 22:31:02.315
CMCLI WARNING: CMInitContext: init ctx(0xad96e80)
*** 2005-10-24 22:51:58.192
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/sampledb/redo0/oradata/sampdb/redo/redo102.log'
ORA-27041: unable to open file
Linux Error: 13: Permission denied
Additional information: 2
error 313 detected in background process
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/sampledb/redo0/oradata/sampdb/redo/redo102.log'
ORA-27041: unable to open file
Linux Error: 13: Permission denied
Additional information: 2
ksuitm: waiting for [5] seconds before killing DIAG

The only thing I can still think of is file permissions.
If the system has recently been restored or Redo Log recreated, check the file permissions and ensure that Oracle has Read and Write Access to the Directory and Files.
At least the file permissions on the directory and files should look something like this example
$ls -l /sampledb/redo0/oradata/sampdb/
drwxr-xr-x oracle oinstall 4096 19 May 17:46 redo
$ls -l /sampledb/redo0/oradata/sampdb/redo/
-rw-r----- oracle oinstall 524288512 27 Oct 15:07 redo101.log
$ls -l /sampledb2/redo0/oradata/sampdb/redo2/
-rw-r----- oracle oinstall 524288512 27 Oct 15:21 redo102.log
$ls -l /sampledb3/redo0/oradata/sampdb/redo3/
-rw-r----- oracle oinstall 524288512 27 Oct 15:33 redo103.log

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

Backup using backint fails for maxdb

Hi All, I have configured backint for backup of maxdb for content server 640. I configured it as per the documents available, created the configuration fiale and the parameter file. Created the backup medium in dbmgui. Now when i try to run the backup using the pipe am getting the above mentioned error. Please find below the dbm.ebp log for the same...
more dbm.ebp 2009-10-22 02:06:08 Setting environment variable 'TEMP' for the directory for temporary files and pi pes to default ''. Setting environment variable 'TMP' for the directory for temporary files and pip es to default ''. Using connection to Backint for MaxDB Interface. 2009-10-22 02:06:08 Checking existence and configuration of Backint for MaxDB. Using configuration variable 'BSI_ENV' = '/sapdb/CFC/lcbackup/apoatlas.env' as path of the configuration file of Backint for MaxDB. Setting environment variable 'BSI_ENV' for the path of the configuration fil e of Backint for MaxDB to configuration value '/sapdb/CFC/lcbackup/apoatlas.env' . Reading the Backint for MaxDB configuration file '/sapdb/CFC/lcbackup/apoatl as.env'. Found keyword 'BACKINT' with value '/sapdb/CFC/db/bin/backint'. Found keyword 'INPUT' with value '/tmp/backint4sapdbCFC.in'. Found keyword 'OUTPUT' with value '/tmp/backint4sapdbCFC.out'. Found keyword 'ERROROUTPUT' with value '/tmp/backint4sapdbCFC.err'. Found keyword 'PARAMETERFILE' with value '/sapdb/CFC/lcbackup/param.cfg' . Found keyword 'TIMEOUT_SUCCESS' with value '1800'. Found keyword 'TIMEOUT_FAILURE' with value '1800'. Finished reading of the Backint for MaxDB configuration file. Using '/sapdb/CFC/db/bin/backint' as Backint for MaxDB program. Using '/tmp/backint4sapdbCFC.in' as input file for Backint for MaxDB. Using '/tmp/backint4sapdbCFC.out' as output file for Backint for MaxDB. Using '/tmp/backint4sapdbCFC.err' as error output file for Backint for MaxDB . Using '/sapdb/CFC/lcbackup/param.cfg' as parameter file for Backint for MaxD B. Using '1800' seconds as timeout for Backint for MaxDB in the case of success . Using '1800' seconds as timeout for Backint for MaxDB in the case of failure . Using '/sapdb/data/wrk/CFC/dbm.knl' as backup history of a database to migra te. Using '/sapdb/data/wrk/CFC/dbm.ebf' as external backup history of a database to migrate. Checking availability of backups using backint's inquire function. Check passed successful. 2009-10-22 02:06:08 Checking medium. Check passed successfully. 2009-10-22 02:06:08 Preparing backup. Setting environment variable 'BI_CALLER' to value 'DBMSRV'. Setting environment variable 'BI_REQUEST' to value 'NEW'. Setting environment variable 'BI_BACKUP' to value 'FULL'. Constructed Backint for MaxDB call '/sapdb/CFC/db/bin/backint -u CFC -f back up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c'. Created temporary file '/tmp/backint4sapdbCFC.out' as output for Backint for MaxDB. Created temporary file '/tmp/backint4sapdbCFC.err' as error output for Backi nt for MaxDB. Writing '/sapdb/CFC/lcbackup/pipe1 #PIPE' to the input file. Writing '/sapdb/CFC/lcbackup/pipe2 #PIPE' to the input file. Prepare passed successfully. 2009-10-22 02:06:08 Creating pipes for data transfer. Creating pipe '/sapdb/CFC/lcbackup/pipe1' ... Done. Creating pipe '/sapdb/CFC/lcbackup/pipe2' ... Done. All data transfer pipes have been created. 2009-10-22 02:06:08 Starting database action for the backup. Requesting 'SAVE DATA QUICK TO '/sapdb/CFC/lcbackup/pipe1' PIPE,'/sapdb/CFC/ lcbackup/pipe2' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACKINT_ONLINE1'' from db-kernel. The database is working on the request. 2009-10-22 02:06:09 Waiting until database has prepared the backup. Asking for state of database. 2009-10-22 02:06:09 Database is still preparing the backup. Waiting 1 second ... Done. Asking for state of database. 2009-10-22 02:06:10 Database is still preparing the backup. Waiting 2 seconds ... Done. Asking for state of database. 2009-10-22 02:06:12 Database has finished preparation of the backup. The database has prepared the backup successfully. 2009-10-22 02:06:12 Starting Backint for MaxDB. Starting Backint for MaxDB process '/sapdb/CFC/db/bin/backint -u CFC -f back up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c >>/tm p/backint4sapdbCFC.out 2>>/tmp/backint4sapdbCFC.err'. Process was started successfully. Backint for MaxDB has been started successfully. 2009-10-22 02:06:12 Waiting for end of the backup operation. 2009-10-22 02:06:12 The backup tool is running. 2009-10-22 02:06:12 The database is working on the request. 2009-10-22 02:06:14 The backup tool process has finished work with return co de 2. 2009-10-22 02:06:17 The database is working on the request. 2009-10-22 02:06:27 The database is working on the request. 2009-10-22 02:06:42 The database is working on the request. 2009-10-22 02:07:02 The database is working on the request. 2009-10-22 02:07:15 Canceling Utility-task after a timeout of 60 seconds ela psed ... OK. 2009-10-22 02:07:17 The database has finished work on the request. Receiving a reply from the database kernel. Got the following reply from db-kernel: SQL-Code :-903 The backup operation has ended. 2009-10-22 02:07:17 Filling reply buffer. Have encountered error -24920: The backup tool failed with 2 as sum of exit codes. The database request was canceled and ended with error -903. Constructed the following reply: ERR -24920,ERR_BACKUPOP: backup operation was unsuccessful The backup tool failed with 2 as sum of exit codes. The database request was canceled and ended with error -903. Reply buffer filled. 2009-10-22 02:07:17 Cleaning up. Removing data transfer pipes. Removing data transfer pipe /sapdb/CFC/lcbackup/pipe2 ... Done. Removing data transfer pipe /sapdb/CFC/lcbackup/pipe1 ... Done. Removed data transfer pipes successfully. Copying output of Backint for MaxDB to this file. -
Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)- -
Data Protection for mySAP(R) Interface between BR*Tools and Tivoli Storage Manager - Version 5, Release 4, Modification 0.0 for Linux x86_64 - Build: 303 compiled on Nov 16 2006 (c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved. BKI0008E: The environment variable BI_CALLER is not set correctely. The current value is "DBMSRV" usage: backint -p [-u ] [-f ] [-t ] [-i ] [-o ] [-c] where: backint utility user backup | restore | inquire | password | delete file | file_online parameter file for backup utility name of a text file that defines the objects default: STDIN Pool for processing messages and the results of the executed function. default: STOUT BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT . BKI0021I: Elapsed time: 01 sec . BKI0024I: Return code is: 2. -
End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)- - Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out '. Copying error output of Backint for MaxDB to this file. - Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC .err) - End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e rr)--
Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC FC.err'. Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'. Have finished clean up successfully.
Also, is there any specification about the user permissions and about how the backup should be run?

Hi Lars,
I understand that its a clumpsy over here, but i already have raised an OSS message and SAP said, that they cannot support this issue with backint. If you can provide me with an email id, i can send you the log files which would be easy to read.
My issue is that am not able run backup for maxdb of content server 640 using the backint tool.
I have created the configuration file and the parameter file as per the specifications from http://maxdb.sap.com/doc/7_7/a9/8a1ef21e4b402bb76ff75bb559a98a/content.htm and http://maxdb.sap.com/doc/7_7/50/075205962843f69b9ec41f34427be7/content.htm.
THe server is registered to the TSM server. Now when i run the wizard to take the backup using the backint tool, it gives the error "Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)- -
Data Protection for mySAP(R) Interface between BR*Tools and Tivoli Storage Manager - Version 5, Release 4, Modification 0.0 for Linux x86_64 - Build: 303 compiled on Nov 16 2006 (c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved. BKI0008E: The environment variable BI_CALLER is not set correctely. The current value is "DBMSRV" usage: backint -p [-u ] [-f ] [-t ] [-i ] [-o ] [-c] where: backint utility user backup | restore | inquire | password | delete file | file_online parameter file for backup utility name of a text file that defines the objects default: STDIN Pool for processing messages and the results of the executed function. default: STOUT BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT . BKI0021I: Elapsed time: 01 sec . BKI0024I: Return code is: 2. -
End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)- - Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out '. Copying error output of Backint for MaxDB to this file. - Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC .err) - End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e rr)--
Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC FC.err'. Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'. Have finished clean up successfully."
I think this should be fine to read...
Krishna KK

Login failed for user 'IIS APPPOOL\DefaultAppPool' on SQL Express 2012

I am new to both ASP.NET and SQL Server.
I have IIS8 installed on my Windows 8 PC, together with SQL Server Express 2012. Given my ignorance, I have just set everything up using default values.
I have a very small web site set up in its own folder and set up in IIS 8 as a virtual folder under the default web site. I have also set up a very simple database called 'StockControl' via SSMS, which contains one table called 'Colours' which has two columns.
One page in the website is a simple ASP.NET form which runs on localhost without any problems.
On the second page in the website I added a GridView ASP.NET control, letting Expression Web 4 generate the connection string and place it in a web.config file. I tested the SQL query and the connection as I went along and both came back as successful. So
far, so good.However, when I try to run the page in the browser I get the error message:
Server Error in '/' Application.
Cannot open user default database. Login failed.
Login failed for user 'IIS APPPOOL\DefaultAppPool'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.
Login failed for user 'IIS APPPOOL\DefaultAppPool'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Cannot open user default database. Login failed.
Login failed for user 'IIS APPPOOL\DefaultAppPool'.]
I have spent two days trying to find out what I have done wrong and even uninstalled and re-installed SQL Server just in case i'd totally messed up and corrupted the database.
I would really appreciate some help please.

I changed the IIS default identity to NetworkService and got this error instead
Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\StockControl.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)".
An attempt to attach an auto-named database for file C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\StockControl.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
There is nothing running that is using the database.
I have also set a login up for the Apppool and set the user mapping to the database but the problem persists,
What is so infuriating is that a week ago I had several pages in this website that displayed, inserted, updated and deleted records on this database using ADO as well as ASP.NET running just fine. Then this problem came out of nowhere.

Partition Failed Partition failed with the error: POSIX reports: The operation couldn't be completed. CAN NOT ALLOCATE MEMORY

I plug usb mass storage device to my macbook pro i7 than every thing is stack and i reinforce to shutdown and than I start again but mac fail to boot again.
I tried different optiones in disk utility in mac os startup disk. but still fail to repair, erase and partition. I try to fix with the steps listed in
https://discussions.apple.com/message/13288923#13288923
but it fail to partition with the msg:
Partition Failed
Partition failed with the error: POSIX reports: The operation couldn’t be completed.cannot allocate memory
pls pls pls help urgentely on this matter I stop working.
Kind Regards,
pe

Hi again OGELTHORPE.
I've already run two hardware tests. One quick one and one extended one. It was unable to pick anything up.
It's like everything is running perfectly, but when I go to erase the HDD or partition it, it pops up with the error message. Even when I try to erase and partition using "Terminal", I received the same error message.
It's beginning to do my head in, but will see if replacing the SATA cable will make any difference. If it doesn't, I'll hazard a guess it could be the Logic Board.
Thanks again for your suggestions!
L.

Best partitioning strategy for OS 8.6?

Hello,
I have two hard drives on my beige 233 MHz G3 minitower (rev 1):
4 GIG SCSI
80 GIG ATA
I need to install OS 8.6. I was considering using both drives but I do not know what I should put on each drive.
Should I install OS 8.6 onto the 4 GIG drive or the 80 GIG drive?
Option 1:
4 GIG: OS 8.6
80 GIG: applications
Option 2:
4 GIG drive: don't use it at all
80 GIG drive: OS 8.6 and the applications
Option 3 (using partitioning):
4 GIG drive: don't use it at all
80 GIG drive: First partition (15 GIGS): OS 8.6 and the applications. Second partition: (65 GIGs) for data.
Unfortunately 4 GIGs is too small for all my applications and so that is why I was thinking of not even using the 4 GIG drive and instead putting everything onto the 80 GIG drive. I have heard it is a good idea to keep the system and apps on the same volume - I am not sure if this is always true however.
Any thoughts?
Thanks!
The other issue is that I might have to further partition the 80 GIG drive into an additional partition for OSX in case I also need to install OSX because I read somewhere that on a beige G3, OSX must be installed in a partition that is no larger than 8 GIGs and it must be the first partition.
This scenario would look like this:
Option 4 (using more partitioning):
4 GIG: don't use it at all
80 GIG:
First partition (7.9 GIGS): OS X and OS X applications
Second partition (15 GIGS): OS 8.6 and the applications
Third partition: (57 GIGs) for data.
(I created a separate realted post under older hardware/beige G3/usage regarding how to boot between OS 8.6 and OS X in case anyone is interested.)

Thanks Don and Jim,
I carefully considered all your comments and here's what I plan to do:
It is important for me to indicate that, for this beige G3, I will use OSX primarily (OS 10.1.5) and therefore I would like its partition to be as large as possible. I read this will benefit OSX's swap file needs. However the OS must be within the 7.7 GIG limit for this particular mac (beige G3). I can therefore conclude that I should make the first partition exactly 7.7 GIGs and use it only for OSX.
Jim, you say that the 8 GIG limit for the startup volume applies to all OSes not just OSX and so that is a critical point for me. I will need to be certain about this. Are you sure OS 8.6 isn't bootable if it is in another partition beyond the first 8 GIGS on a beige G3? You see, I was thinking of installing OS 8.6 on a second partition of the 80 GIG drive like this:
partition 1 (7.7 GIGs): OSX
partition 2: (15 GIGs) : OS 8.6 and its applications
Based on your comment (the 8 GIG limit for the startup volume applies to all OSes) this will not work - the OS 8.6 partition will never boot because it is not within the first 8 GIGs. I had thought that rule only applied to OSX.
And if so, the best solution is to put OS 8.6 on the 4 GIG drive instead.
Here is my final solution:
4 GIG drive:
OS 8.6 (plus maybe photoshop)
80 GIG drive:
partition 1 (7.7 GIGs): OSX (10.1.5 is the version I have)
partition 2: (about 67 GIGs) : all the OSX applications, all the OS 8.6 applications and all my data
partition 3 (5 GIGS) : scratch disk just for running photoshop in OS 8.6 (I may or may not create this last partition - still thinking about it)
I might consider putting one or two of my OS 8.6 applications on the 4 GIG drive - the higher end applications such as photoshop which I think might fit on the 4 GIG drive with the OS 8.6.
As for the 5 GIG scratch partition on the 80 GIG drive, I am still considering if I need to do this or not because I would rarely use it - only for the few times I might run photoshop in OS 8.6. Maybe I should keep this partition anyways for something else just in case.
Other less important notes:
I might, one day, be able to use OS 9 instead of OS8.6 in these examples, in which case I will just substitute 9 for 8.6 in my examples noted above. Howwever for now I am reserving OS 9 for another computer I have. As for classic, I don't need classic support. I would rather just boot directly into 9. I have used classic before and I found it to be slow.
Thanks Jim and Don for your help.
If anyone sees anything wrong with this setup please let me know!

Partition failed with the error: No space left on device

I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!

arajs wrote:
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!
This is a standard error message.
If you would have checked into the bootcamp forum you would have instantly found the solution.
http://discussions.apple.com/forum.jspa?forumID=1244&start=0
All that error message means is that you do not have enough conguous disk space available. No big deal at all for an older system. You have bits of files strewn over the "free space."
The solution as you would find in the bootcamp forum is to clone your HD, using a file-file clone, then test the clone to be sure it is working and then to erase your HD and clone back.
Works every time.
Message was edited by: Theodore

Unrecognized partition table for drive 80 error??

Currently running leopard on a macbook pro.
Formatted w bootcamp and running Windows Vista Ultimate.
Installation went fine reformated drive to ntfs 45gigs.
But when booting into windows I get this error message
"unrecognized partition table for drive 80"
Then the system boots into vista as normal but that error message is annoying.
Tells me to fix bootmgr using fdisk. How do I do that?
Thanks.

I previously had Vista installed under the beta with Tiger and there was no issues at all regarding boot times or error messages. (Boot times being quite nippy considering)
I did reformat the hard drive space partitioned in side Vista installation as NTFS. As I am only a switcher for a year or so I imagine there may be something I am missing but given the text when I try to boot into Vista, it looks to be the boot loader that is erroring and that looks the same as a GRUB loader failing.
I just do not get why a BETA product would work fine, then after a fresh installation of the new Mac OSX 10.5 with the final version of boot camp I would receive errors like this.
I have reclaimed the hard drive space and split the disk again but the same error persists. Previously I was showing off my Macbook to work mates showing how it handled Windows as well as the user friendly OSX. Now all I can show them is a 5 minute loading screen full of non booting Vista as they look at me like some kind of idiot. (Which depending on who you ask is possibly correct)

Bpel deployment fails for all processes that have revision other than 1.0.

Using: Release *10.1.3.3.1*
Hello All,
Bpel deployment fails for all processes that have revision other than *1.0*.
We have been attempting to deploy several BPEL projects via ANT script to a target environment and are encountering failures to deploy for every project which isn’t a (revision 1.0). We are getting the following error whenever we try to deploy a process with a revision other than 1.0:
D:\TJ_AutoDeploy\BPEL_AutoDeploy_BETA\build.xml:65: BPEL archive doesnt exist in directory "{0}"
     at com.collaxa.cube.ant.taskdefs.DeployRemote.getJarFile(DeployRemote.java:254)
     at com.collaxa.cube.ant.taskdefs.DeployRemote.deployProcess(DeployRemote.java:409)
     at com.collaxa.cube.ant.taskdefs.DeployRemote.execute(DeployRemote.java:211)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
     at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
     at org.apache.tools.ant.Main.runBuild(Main.java:668)
     at org.apache.tools.ant.Main.startAnt(Main.java:187)
     at org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
     at org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
The structure of our automated deployment script is as follows:
First, a batch script calls (Jdeveloper_BPEL_Prompt.bat) in order to set all necessary environment variables i.e. ORACLE_HOME, BPEL_HOME, ANT_HOME, etc for ant.
Next, the script lists every .jar file within the directory to an .ini file called BPEL_List.ini. Furthermore, BPEL_DIR, ADMIN_USER and ADMIN_PSWD variables are set and initialized respectively to:
-     “.” – point to directory where script is running from because all the BPEL processes are located here
-     “oc4jadmin”
-     “*********” (whatever the password for out environment is)
We’ve developed a method to have the script prompt the user to select the target environment to deploy to. Once the user selects the appropriate environment, the script goes through the BPEL_List.ini files and a loop tells it that for every BPEL process listed:
DO ant
-Dprocess.name=%%b
-Drev= !Rev!
-Dpath=%BPEL_DIR%
-Ddomain=default
-Dadmin.user=%ADMIN_USER%
-Dadmin.password=%ADMIN_PWD%
-Dhttp.hostname=%HOST%
-Dhttp.port=%PORT%
-Dverbose=true
(What’s happening is that the variables in the batch file are being passed on to the ANT script where *%%b* is the process name, !rev! is revision #, and so on…)
The loop goes through each line in the BPEL_List.ini and tokenizes the BPEL process into 3 parts *(%%a, %%b, and %%c)* but we only extract 2 parts: *%%b* (process name) and *%%c* which becomes !Rev! (revision number).
Example:
Sample BPEL process:
bpel_ThisIsProcess1_1.0.jar
bpel_ThisIsProcess2_SOAv2.19.0.001B.jar
After tokenizing:
%%a     %%b     %%c
bpel     ThisIsProcess1     1.0.jar
bpel     ThisIsProcess2     SOAv2.19.0.001B.jar
*!Rev!* and not *%%c* because *%%c* will return whatever the revision number is + the “.jar” file extension as illustrated above. So to circumvent this, we parse *%%c* so that the last 4 characters are stripped. Such is done like this:
set RevN=%%c
set RevN=!RevN:~0,-4!
Hence, the usage of !Rev!.
Below is a screenshot post of the ANT build.xml that goes with our script:


<project name="bpel.deploy" default="deployProcess" basedir=".">
     
     <property name="process.dir" value="${basedir}" />
          
          
     <property environment="env"/>
     
          <condition property="bpel.home" value="${env.BPEL_HOME}">
               <available file="${env.BPEL_HOME}/utilities/ant-orabpel.xml" />
          </condition>
     
     
     
     
     <property name="oracle.home" value="${env.ORACLE_HOME}" />
     <property name="bpel.home" value="${oracle.home}/bpel" />
     
     <property file="${process.dir}/build.properties"/>
     
     <import file="${bpel.home}/utilities/ant-orabpel.xml" />
     
     <property file="${bpel.home}/utilities/ant-orabpel.properties" />
     
     <target name="deployProcess">
          <tstamp>
               <format property="timestamp" pattern="MM-dd-yyyy HH:mm:ss" />
          </tstamp>
          
          <record name="build_verbose.log" loglevel="verbose" append="true" />
          <record name="build_debug.log" loglevel="debug" append="true" />
          <echo></echo>
          <echo>####################################################################</echo>
          <echo>BPEL_AutoDeploy initiated @ ${timestamp}</echo>
          <echo>--------------------------------------------------------------------</echo>
          <echo>Deploying ${process.name} on ${http.hostname} port ${http.port} </echo>
          <echo>--------------------------------------------------------------------</echo>
          <deployProcess
               user="${admin.user}"
               password="${admin.password}"
               domain="${domain}"
               process="${process.name}"
               rev="${rev}"
               dir="${process.dir}/${path}"
               hostname="${http.hostname}"
               httpport="${http.port}"
               verbose="${verbose}" />
          <sleep seconds="30" />
          
     </target>
     
</project>
SUMMARY OF ISSUE AT HAND:
~ Every bpel process w/ 1.0 revision deploys with no problems
~ At first I would get an invalid character error most likely due to the “!” preceding “Rev”, but then I decided to set rev=”false” in the build.xml file. That didn’t work quite well. In another attempt, I decided to leave the –Drev= attribute within the batch script blank. That still led to 1.0s going through. My next thought was deploying something other than a 1.0, such as 1.2 or 2.0 and that’s when I realized that if it wasn’t a 1.0, it refused to go through.
QUESTIONS:
1.     IS THERE A WAY TO HAVE ANT LOOK INTO THE BPEL PROCESS AND PULL THE REVISION ID?
2.     WHAT ARE WE DOING WRONG? ARE WE MISSING ANYTHING?
3.     DID WE GO TOO FAR? MEANING, IS THERE A MUCH EASIER WAY WE OVERLOOKED/FORGOT/OR DON’T KNOW ABOUT THAT EXISTS?
Edited by: 793292 on Jul 28, 2011 12:38 PM

Only thing i can think of is instead of using a MAC ACL , u cud jus use the default class
Policy Map Test
class class-default
police 56000 8000 exceed-action drop
Class Map match-any class-default (id 0)
Match any
You would be saving a MAC-ACL ;-).

LMS 3.2 RME 4.3.1 Inventory Failing for Switches

I have two 6500 Series switches that RME is not able to get the inventory for. It keeps on failing. I have tried to increase the SNMP timeout to a larger number also increased the telnet timeout. I've seen it asked for in other posts. Here is my ICServer log after i tried a collection.
,[Thread-16],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.LibInventory.PortInterfaceAGI_RFC1213_HelperMethods,getIfTableEntriesFromDevice,749,Entry speed : 0 Index value 147
[ Tue Mar 02 09:54:31 CST 2010 ],INFO ,[Thread-16],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.LibInventory.PortInterfaceAGI_RFC1213_HelperMethods,getIfTableEntriesFromDevice,759,Entry speed after if block: 0 Index value : 147
[ Tue Mar 02 09:54:31 CST 2010 ],INFO ,[Thread-16],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.LibInventory.PortInterfaceAGI_RFC1213_HelperMethods,getIfTableEntriesFromDevice,749,Entry speed : 0 Index value 148
[ Tue Mar 02 09:54:31 CST 2010 ],INFO ,[Thread-16],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.LibInventory.PortInterfaceAGI_RFC1213_HelperMethods,getIfTableEntriesFromDevice,759,Entry speed after if block: 0 Index value : 148
[ Tue Mar 02 09:54:31 CST 2010 ],INFO ,[Thread-16],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.LibInventory.PortInterfaceAGI_RFC1213_HelperMethods,getIfTableEntriesFromDevice,749,Entry speed : 0 Index value 149
[ Tue Mar 02 09:54:31 CST 2010 ],INFO ,[Thread-16],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.LibInventory.PortInterfaceAGI_RFC1213_HelperMethods,getIfTableEntriesFromDevice,759,Entry speed after if block: 0 Index value : 149
[ Tue Mar 02 09:54:34 CST 2010 ],INFO ,[Thread-21],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,549,DP time is 5 seconds for 192.168.10.53
[ Tue Mar 02 09:54:34 CST 2010 ],ERROR,[Thread-21],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,729,Exception for device 192.168.10.53 is
java.lang.reflect.InvocationTargetException
    at sun.reflect.GeneratedMethodAccessor12.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:719)
    at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NumberFormatException: EPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.CiscoVersionString.parseVersionString(CiscoVersionString.java:154)
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.CiscoVersionString.<init>(CiscoVersionString.java:86)
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.compareVersions(ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.java:139)
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.iosVersionCheck(ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.java:201)
    at com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatSwitch.ContainmentAGI_ENTITY_Mib.g$eval(ContainmentAGI_ENTITY_Mib.java:147)
    at com.cisco.nm.xms.xdi.ags.ContainmentAGI.g$eval(ContainmentAGI.java:21)
    at com.cisco.nm.xms.xdi.SdiEngine.initAndEvalAGIs(SdiEngine.java:383)
    at com.cisco.nm.xms.xdi.SdiEngine.request(SdiEngine.java:309)
    at com.cisco.nm.xms.xdi.SdiEngine.getDevRepr(SdiEngine.java:302)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:539)
    ... 1 more
[ Tue Mar 02 09:54:34 CST 2010 ],ERROR,[Thread-21],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,777,Unknown Exception
java.lang.NumberFormatException: EPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.CiscoVersionString.parseVersionString(CiscoVersionString.java:154)
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.CiscoVersionString.<init>(CiscoVersionString.java:86)
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.compareVersions(ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.java:139)
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.iosVersionCheck(ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.java:201)
    at com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatSwitch.ContainmentAGI_ENTITY_Mib.g$eval(ContainmentAGI_ENTITY_Mib.java:147)
    at com.cisco.nm.xms.xdi.ags.ContainmentAGI.g$eval(ContainmentAGI.java:21)
    at com.cisco.nm.xms.xdi.SdiEngine.initAndEvalAGIs(SdiEngine.java:383)
    at com.cisco.nm.xms.xdi.SdiEngine.request(SdiEngine.java:309)
    at com.cisco.nm.xms.xdi.SdiEngine.getDevRepr(SdiEngine.java:302)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:539)
    at java.lang.Thread.run(Thread.java:595)
[ Tue Mar 02 09:54:34 CST 2010 ],INFO ,[Thread-21],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,841,Device collection failed for 192.168.10.53
[ Tue Mar 02 09:54:34 CST 2010 ],INFO ,[Thread-21],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,1191,No Trap
[ Tue Mar 02 09:54:34 CST 2010 ],INFO ,[Thread-21],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,1203,CALLING SELF TEST
[ Tue Mar 02 09:54:35 CST 2010 ],INFO ,[Thread-21],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,1207,DONE WITH SELF TEST
[ Tue Mar 02 09:54:35 CST 2010 ],INFO ,[Thread-16],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,549,DP time is 5 seconds for 172.23.10.252
[ Tue Mar 02 09:54:35 CST 2010 ],ERROR,[Thread-16],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,729,Exception for device 172.23.10.252 is
java.lang.reflect.InvocationTargetException
    at sun.reflect.GeneratedMethodAccessor12.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:719)
    at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NumberFormatException: EPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.CiscoVersionString.parseVersionString(CiscoVersionString.java:154)
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.CiscoVersionString.<init>(CiscoVersionString.java:86)
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.compareVersions(ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.java:139)
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.iosVersionCheck(ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.java:201)
    at com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatSwitch.ContainmentAGI_ENTITY_Mib.g$eval(ContainmentAGI_ENTITY_Mib.java:147)
    at com.cisco.nm.xms.xdi.ags.ContainmentAGI.g$eval(ContainmentAGI.java:21)
    at com.cisco.nm.xms.xdi.SdiEngine.initAndEvalAGIs(SdiEngine.java:383)
    at com.cisco.nm.xms.xdi.SdiEngine.request(SdiEngine.java:309)
    at com.cisco.nm.xms.xdi.SdiEngine.getDevRepr(SdiEngine.java:302)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:539)
    ... 1 more
[ Tue Mar 02 09:54:35 CST 2010 ],ERROR,[Thread-16],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,777,Unknown Exception
java.lang.NumberFormatException: EPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.CiscoVersionString.parseVersionString(CiscoVersionString.java:154)
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.CiscoVersionString.<init>(CiscoVersionString.java:86)
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.compareVersions(ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.java:139)
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.iosVersionCheck(ImageAGI_CISCO_ENHANCED_IMAGE_HelperMethods.java:201)
    at com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatSwitch.ContainmentAGI_ENTITY_Mib.g$eval(ContainmentAGI_ENTITY_Mib.java:147)
    at com.cisco.nm.xms.xdi.ags.ContainmentAGI.g$eval(ContainmentAGI.java:21)
    at com.cisco.nm.xms.xdi.SdiEngine.initAndEvalAGIs(SdiEngine.java:383)
    at com.cisco.nm.xms.xdi.SdiEngine.request(SdiEngine.java:309)
    at com.cisco.nm.xms.xdi.SdiEngine.getDevRepr(SdiEngine.java:302)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:539)
    at java.lang.Thread.run(Thread.java:595)
[ Tue Mar 02 09:54:35 CST 2010 ],INFO ,[Thread-16],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,841,Device collection failed for 172.23.10.252
[ Tue Mar 02 09:54:35 CST 2010 ],INFO ,[Thread-16],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,1191,No Trap
[ Tue Mar 02 09:54:35 CST 2010 ],INFO ,[Thread-16],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,1203,CALLING SELF TEST
[ Tue Mar 02 09:54:35 CST 2010 ],INFO ,[Thread-16],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,1207,DONE WITH SELF TEST

This is bug CSCtb16925. A patch is available from the TAC to correct it.

Partition Failed for OCZ-AGILITY3 as a second HDD

Similar Messages

Maybe you are looking for