Partition Magic Error 110 on new Thinkpad W500

I have a new W500 that (automatically) configured to WinXP right out of the box (which is the OS I want).
After getting the OS in order (updates, customizations, firewall, anti-virus, firmware updates, etc.) I installed my PowerQuest Partition Magic v8 (and applied the patch v8.01).
The HD was configured as almost entirely used by C:, with some 5g allocated to the 'hidden' partition.
I'm trying to resize C: down to about 25g, in order to be able to created new partitions, and I am unable to do so.
I'm first receiving Error 110 "Partition table number of sectors is inconsistent" and PM is asking me if I want to "fix" this situation.  I have NOT YET allowed PM to proceed.  After that, it attempts to still "run", but then I get some other errors and the program closes.
I ran the reporting/inquiry program and it gave me a few other errors on the partitions (i.e. Errors 105, 106 108, and 109).
From what I've seen on the internet, there seems to be some problem(s) with PMv8 and Vista, but I am running XP.
Has anyone seen this before?
Thank you in advance.

Hello,
our mods here do favour it, too.
And member TomTom in my sugested thread has done it simply and fast.
There is NO problem partitioning the drive, though you have to be careful not to modify/ erase the last special partition.
R&R files are kept on the C: drive so there is a special partition at the end of the drive,
that is used for booting before the OS.
If you damagethis one, theres is no more Blue Button functionality.
Please, first burn your recovery DVD´s and safe your C:/SWTool folder, if something goes
wrong you can easily restore your system with your software.
Regards
Andreas
Message Edited by Agotthelf on 10-01-2008 08:12 PM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
 English Community       Deutsche Community       Comunidad en Español

Similar Messages

  • I am getting error in createing new partition. orr error -14074

    Hi , getting error in creating new partition as "ora-14074" partition bound must collate higher than that of the last partition"
    Oracle version is - 9.2.0.6
    OS version - SunOS

    Hi,
    show the statment that you want to create a new parition, and did you keep in mind the highest partition bound? Anyway, the problem seems to be easy to fix:
    http://www.dba-oracle.com/t_ora_14074_partition.htm

  • X300: Partition Magic 8 needs Windos XP safe mode

    Hi I have the following setup: ThinkPad X300 6477-1RG, Win XP, and I want to use Partition Magic 8 to add extra partitions on my disc. Partition magic comes back with the notorious error#27, during start-up, which just means that there are other processes running locking disc access. See for example here: http://www.mcmcse.com/forums/viewtopic.php?p=+15682
    After reading all the relevant information available on the web to this problem it boils down to the question how to start-up in Win XP 'safe mode', since, without a floppy drive one cannot start-up PM8 during booting!
    So here is my question: How can I start-up XP in "safe-mode" or in an equivalent mode without all the ThinkVantage recovery etc. processes coming in my way??? Disabeling all processes and automatic start-ups from msconfig is not sufficient!!!
    Many thanks for any hints on this issue!

    I've had Thinkpads since they were introduced and have been using Partition Magic to create logical drives for ten years without any problems. However with my new X300,  I ran into the same Error 27 - Cannot Lock Drive.
    First a little review about Partition Magic.  There's two steps.  First, run the Wizard to make the instructions to create the partitions, and then in Step 2 the system reboots and writes the changes in DOS before WIndows loads..  That's where the Error 27 pops up.
    There's definitely a problem with F8 bringing up Safe Mode, which seriously needs to be addressed.  I got Safe Mode one time in about 25-30 attempts, and don't know what the secret was.  If you press too early or too long, you get "Stuck Key - hit F1."  If you hit too late, it doesn't go into Safe Mode and also aborts the PM writing in DOS.  (Press any key to abort.)
    What finally worked:
    In Run / msconfig / check BOOT.INI / SAFEBOOT - but don’t hit Restart until the PM Wizard is ready
    Run the PM Wizard
    At this point there are two “Restart” options - one from Wizard, the other from the System Configuration Utility - I don’t know which I hit.  However, when it rebooted, it successfully wrote the instructions without any errors.
    Also, as to the PM Wizard, I choose NOT to “move” the Lenovo Service partition, although that was the “recommended” move.  This is because the "recommended" move required the Service partition to be moved, which I figured might not be desirable since the Lenovo configuration was designed to protect the Service partition.  I have no idea whether this was necessary.
    What also did not work:  Booting with PM's Recovery Diskettes did not work because the PM Wizard did not offer the option of creating partitions, only moving and resizing them.
    Thanks to Bananaman for the reminder about BOOT.INI / SAFEBOOT.
    Now we have to flatten the problem with F8 -- BOOT.INI / SAFEBOOT is useless if you can't boot your machine.

  • A few thoughts and experiences after a few hours using my new ThinkPad E440 with Win 8.1

    After waiting 36 days for my new ThinkPad to arrive, I guess I'm just "eh" about it after using it some. Here are some of my thoughts, opinions, and experiences I've had after using it for a few hours... Hope this helps other people.
    I should not be surprised because I read all the reviews, but the touch pad really sucks. I hate everything about it, the way it clicks - it's so loud and clunky! - and it's insensitivity (and I adjusted this to be more sensitive). Thank goodness for the track point. I love that thing.
    The touchscreen stopped working after a few hours of use. After I rebooted it came back. Is this a bad omen? Or did I inadvertantly turn it off? Is that even possible? I am new to Windows 8 so anything is possible.
    The touch screen, when it's working, is not very responsive. It's MUCH LESS responsive than my Samsung Galaxy Note 2 Android phone or my LG G Pad 8.3 tablet. This is very disappointing.
    I ran the hardware scan that is in the Lenovo Solution Center and got a warning under the category "Local Connection Test". I looked at the list of System Events and it's very long. The first application error event name is MpTelemetry. Response is "Not available". The next one is "PnPRequestAdditionalSoftware". Response is "Not available". And the list goes on and on and on for pages. I have no idea what to do about this or what it means.
    Also in the Lenovo Solution Center, under Software, there is a Critical Alert that says I never updated Windows. But I did when it prompted me to while it was first booting up and it was updating and installing things. Where it says "To update your operating system, you must run Windows Update", I click on the Launch button and it takes me to Windows Update where it says No Updates are Available. Go figure. It also says there have been 9 Windows updates made to the computer. I guess I'll have to just always ignore that Critical Alert.
    In the system tray, it says "ThinkPad OneLink Dock Detached!". I don't have a dock... So, yes, that's true, it is detached.   I'll have to hide that one.
    I realize there is a Lenovo Recovery Partition on the hard drive but I would really like to create a set of recovery disks before I start customizing this thing, installing apps, and moving my files over. I can't find anything that tells me how to do it. Under the control panel, there is the Recovery icon. The only choice there for creating recovery media is to create a Recovery Drive, not disks. I'll post a separate item to get information on this.
    On the positive side, I have had it in my lap the whole time and it's not gotten too hot for my legs. That's a big improvement on my old Toshiba Satellite Pro.
    This locating the Fn key to the left of the CTRL key decision must have been made by someone smoking crack. Why would anyone in their right mind want to do this? We've had the CTRL key on the outer left edge like, FOREVER, why move it now?? This will be something that will take me a long time to adjust to - if I ever do. I use the CTRL a lot for cutting, pasting, and formatting things in Excel and Word. It's going to be a battle. I wonder if any software exists that allows you to redefine the keys? Speaking of location of keys, I keep hitting the Page Down key when I want the Page Up key. I'm used to the Page Up key being above the Page Down key instead of to the left.
    After being told here in the forum that the fingerprint reader was not an option in the US I am pleasantly surprised to see one on my new ThinkPad.
    I use the right-click on my mouse often. For example, to open a link in a new tab instead of switching to the new URL. For some reason, when I click on the right part of the touch pad when the mouse is located over a link, it just opens the new URL instead of giving me options for opening the URL. I'll have to figure this out.
    So anyway, I guess that's more than a few things... hope this is useful to someone...

    You can change FN and CTRL key in the BIOS

  • How dissable/reset power-on password on ThinkPad W500 ?

    How dissable/reset power-on password on ThinkPad W500 ?
    SN: xxxxxxx 09/04
    I try this procedure:
    Turn off the computer.
    Remove the battery pack.
    Remove the backup battery.
    Turn on the computer and wait until the POST ends. After the POST ends, the password prompt does not appear. The POP has been removed.
    Reinstall the backup battery and the battery pack.
    but power-on password still here
    Moderator Note; s/n edited for member's own protection

    Exactly what doesn't work?
    from a completely shut down state, not a re-start, press and hold the F1 key while starting the system.  The system should then beep and show the lock symbol with the error codes which mean that the date and time aren't correct, (as a result of the CMOS battery being pulled).
    At the lock prompt enter your supervisor password, not the old or new power-on password, set the time and date to the correct values and remove or change the supervisor password as described in the manual.  If you do not know the supervisor password you will need to find it out from the previous owner if there was one; otherwise you will need a new mainboard.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • QTParted - a Partition Magic clone

    Whenever I partition my HDD I am using Windows Partition Magic... one of the reasons I am still holding Win'98 on my machine. On Win-Lin-Soft website I found QTParted; a Partition Magic clone. AL has the concole version Parted. I am interested in GUI.
    http://qtparted.sourceforge.net/
    http://linuxshop.ru/linuxbegin/win-lin-soft-en/
    I tried building an AL package but libreiserfs is missing. ALs' reiserfsprogs-3.6.11-1 doesn't have this library file (/usr/lib/libreiserfs).
    checking for reiserfs_fs_create in -lreiserfs... no
    configure: error: *** reiserfsprogs library (libreiserfs) not found
    Tried to build from src (progsreiserfs) but failed.
    http://ftp.tuniv.szczecin.pl/pub/linux/ … breiserfs/
    Any solution?

    I installed the rpm version of qtparted with rpm package in incoming (rpm-4.0.4-1.ok.tar.gz)
    http://qtparted.sourceforge.net/forums/ … c.php?t=36
    It seems to work except cannot resize or move ext3 and reiserfs partitions. Fat and ext2 is ok though I have not yet "dared" to try . I am planning to buy a new HDD, then I do the test. Mean while I will try to get the "resize" and "move" option visible. If this work, then files generated by rpm can be compiled to an AL package.

  • Tecra S3 M780 and Partition Magic not possible?

    Hi All..
    Hope someone can help my out here.
    Already tried the search but didn't find an answer.
    Ok, i have an hard disc (100 GIG) and I would like to make partitions on it to store my data on a different partition as my OS.
    Problem is Partition Magic won't run.
    I get an error that there is an partition on my harddisc that has no driveletter.
    I checked it and it's correct.
    On the hard disc are:
    C: allmost the entire disc, Primary
    No driveletter: 16 MB Primary
    No driveletter: 8 MB
    I think the 16 MB Primary is the problem.
    Can someone tell me the reason or purpose for that partition?
    Has it something to do with recovery?
    Is it possible to delete every partition on the hard disc, make new partitions (C,D and E) and then use the recovery cd to install Windows on C?
    Or will the recovery cd automaticly change the hard disc's partition's to its default?
    I already tried to make an Image from C: with Gost or Powerquest but It won't work either.
    My intention was to make partitions and then put the image back.
    Regards Rene

    Hi
    The first question is hard to answer. I don't know what that partition is for. I don't think it is for anything special.
    If you want to divide the HDD into seperate partitions and can accept to recover the unit, then the Recovery CD can help you.
    Just boot up on it like normal, but choose Advanced recovery instead if Standard.
    That will give you the opportunity to manually set the size to assign the C-partition (where the OS will be installed).
    Once done with the installation, just go into diskmanager, add a new partition and format it.
    Tada! You're home.
    BR
    Tom

  • How do I get support for Windows 7 on, and a W7 backup disk for, my new ThinkPad?

    I know these have got to be stupid questions, since I am sure that they have to have been asked before (unless they are clearly explained somewhere that everyone else has found, and I am somehow completely missed it), but I did search the forums and was surprised NOT to find any info on getting Windows 7 technical support after it was factory installed in a month-old Thinkpad. I wonder if the apparent defects in my W7, or maybe a different problem in my browser, could be affecting my ability to search to forums?
    I believe that my Windows 7 is defective, but calling Lenovo, they just talked about reinstalling Win7 from the partition, which makes no sense, if my W7 copy is defective, wouldn't the copy in the partition be defective too? My mom said she ordered a $20 W7 backup disk with the PC, but I never received it, and now Lenovo tech tells me those aren't actually available, and she must have confused it with the W7 upgrade disk, which didn't sound right, since I thought the upgrade disk was over $100, and I never received that one either anyway. If the W7 that was factory-installed is defective, I am assuming it's a copy of the same one in the partition, so that partition recovery is not feasible, is there any way to reorder a W7 re-install disk that will still register as Genuine Windows 7 on a Thinkpad? Now when I search the Lenovo site, I cannot find ANY W7 disks of any kind, neither a backup for factory-installed W7, nor for upgrade from a prior Windows version. Does anyone know how I could go about re-ordering the W7 backup disk when it appears to be missing from the online catalog? Unless this too is a defect in my browser search: can someone give me the link to page where I could select and re-purchase a W7 backup disk?
    It has been a few years since I had a new PC, but I have never even heard of one before that did not come with instruction manuals and OS and support disks, and did not provide any tech support for its own factory-installed software or Windows, at least during the first few months of ownership. Where do new Thinkpad owners turn for individual W7 software support, since Microsoft swears it is Lenovo's responsibility to support W7 under its OEM license, yet Lenovo swears they only support hardware? It almost seems that new users are expected to know everything already, or be initiated enough with the product to know exactly what your problem is and what's causing it, in order to find an online fix. Who do you call if W7 or Lenovo software (but not an ISP issue) appear to be doing something to prevent online access, but there are no discernible hardware issues? Where do you call for individualized W7, as well as Lenovo software, support, especially after no one online has ever heard of your specific issues and has no workable ideas for fixing them, or when your problem prevents you from getting online at all?
    Thanks so much

    http://www.apple.com/support/bootcamp/
    Boot Camp Assistant is already on your computer. You just need to buy Windows. Read the instructions and help files very carefully. Back up your data before taking on this task.

  • NEW THINKPAD OWNER SEEKING HELP

    Hello everyone-
    I am a new ThinkPad owner.  I purchased a used T40 recently and love it. I installed Windows7 on it (it came with W7, but I wiped the hard drive clean and re-installed).
    I do have a few issues I was hoping to get some help on.
    Nothing happens when I hit the IBM Access button.  I know the button itself works because I’ve used it to get into the BIOS.  I read on the Lenovo website that I have to get a separate driver to use with Windows7, but I have note been able to find it.  Does anyone know where I can find it?
    Also, my ThinkPad has a 32G ATI Radeon 9000 video card, but I don’t think I have the proper driver for it because Windows installed a Standard VGA driver and I am not able to use Aero (which I was before).  I’ve searched both ATI and Lenovo websites for a driver. Any idea where else I can find it?
    Thanks for your help.
    T40 2373-94U
    ATI Radeon 9000, 32MB

    Recovery parition can only be installed from IBM/Lenovo recovery media, and for your machine these were only available in W2K and XP. You'll never be able to have a proper recovery partition with W7, even if you were to install the OS from recovery media for T400, since the hardware is way too different.
    You can't install a better video card, since the card itself is soldered to the motherboard. You could swap an entire motherboard. How cost-effective this would be in the long run is up to you to decide.
    Hope this helps.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • CS6 master collection (korean)trial ver. error 110 or 108

    My system is windows 7 X64 ultimate, 8G ram and 500G HDD
    When I tried to download CS6 master collection (korean)
    trial version via adobe download asistance, everytime when the progress is about 2/3 complete, the statement "error 110....." or 108 appear and the download stopped.
    I tried to restart the download, but the download didn't restart again. Even I tried another new download, but the same thing happened again.
    Also I tried format my computer,but same thing happened again.
    (Reformat and reinstall)
    What happened to the CS6 download manager or server whenever the download is reached certain place, it stopped ?
    Is there any alternative way other than adobe download assistance to download trial version of CS 6 master collection (korean) version since I need to elvauate the product before my purchase?
    Please help me!

    Try downloading CS6 using the direct download link.
    http://prodesigntools.com/adobe-cs6-direct-download-links.html
    Please read the instructions very carefully, you will be directed to another website to complete the download:

  • Error 110 encountered and download stopped

    My system is windows 7 X64 ultimate, 8G ram and 230G HDD
    When I tried to download creative suite  6 master collection (Traditional Chinese) trial version via adobe download asistance, everytime when the progress is about 2/3 complete, the statement "error 110....." appear and the download stopped.
    I tried to restart the download, but the download didn't restart again. Even I tried another new download, but the same thing happened again.
    I tried another machine that run windows xp, but same thing happened again. I have search the adobe web, there is direct download link, but the Traditional Chinese version is not available there.
    What happened to the CS6 download manager or server whenever the download is reached certain place, it stopped ?
    Is there any alternative way other than adobe download assistance to download trial version of CS 6 master collection (Traditional Chinese) version since I need to elvauate the product before my purchase?

    I think, I've found the answer. The problem is at adobe's side.
    Not only the traditional Chinese version of CS6 master collection, but also the Korean version are not available for download although they were appearred in ADA. Because I've tried to download these two versions, same problem happened, instead very smooth download for English or Japanese versions.
    Any Adobe's official can answer my question?

  • [事例紹介]Install MSI payload failed with error: 110 - 指定されたデバイスまたはファイルを開けません.

    このようなインストールトラブルの解決事例がありましたのでご紹介します。
    【問題点】
    CS5.ｘ Windows 版インストール時、「インストールに問題があります Exit Code:7」エラーが発生。
    エラーサマリーには以下のエラーが含まれていました。
    【エラーサマリー抜粋】
    ----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
    ERROR: 指定されたデバイスまたはファイルを開けません。
    ERROR: Install MSI payload failed with error: 110 - 指定されたデバイスまたはファイルを開けません。
    MSI Error message: 指定されたデバイスまたはファイルを開けません。
    【解決方法】
    これはMSI（Windows Installer）に関するエラーメッセージです。
    Windows Installer を修復することで解決しました。
    手順については以下を参照してください。
    ■Windows Installer の修復によるインストールトラブル対処方法（Windows）
    http://kb2.adobe.com/jp/cps/890/cpsid_89088.html?sdid=JSRPP
    この方法で解決しなかった、という方がいらっしゃいましたら、エラーサマリーをぜひ投稿してください。
    なお、この解決方法は以下の文書にも掲載されています。
    ■「インストールに問題があります」エラーの対処方法（Creative Suite 5, 5.5）
    http://kb2.adobe.com/jp/cps/894/cpsid_89463.html?sdid=JSRPP

    The Error 1603 usually occurs due to insufficient privileges.
    Try the following steps:
    > Enable the hidden Admin Account on Windows 7 ( Ref :  http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
    > Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
    > Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
    Reboot and try installing in the new enabled Admin user account and check.
    Regards,
    Rave

  • Need help-buyin​g decision new thinkpad

    i am a foreign person who want to buy a laptop .since the price of thinkpad in America is more acceptable and the qulity more reliable than in my country, i d like to ask one of my friend who is now in the us to buy a thinkpad for me.the question is that he knows little English and has some difficulty in communicating with American people.
    so who can tell me when and where to buy a thinkpad of high qulity while at low price in your country?
    By the way ,my friend lives in Indiana.what is the tax rate there?
    i am looking forward to an early reply and thank you in advance for your help. 
    moderator note: subject line adjusted to match the topic.

    i am assuming you are going to buy a new thinkpad laptop and not a second hand one?
    Which particular model are you after? if the T400, T500, W500 and R400/R500 is okay for you, then head to outlet.lenovo.com.
    P.S. Please update your location to actual country or city.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Error in Adding new vritual machine server to HaA cluster ???

    Hi
    when i adding new Server to my cluster i see this error
    Check prerequisites to add server (192.168.20.253) to server pool (karkas) succeed
    2009-11-29 12:16:33     Check prerequisites to add server (192.168.20.253) to server pool (karkas) succeed
    2009-11-29 12:16:46     During adding servers ([192.168.20.253]) to server pool (karkas), Cluster setup failed: (OVM-1011 OVM Manager communication with 192.168.20.254 for operation HA Setup for Oracle VM Agent 2.2.0 failed: errcode=50006, errmsg=Do 'clusterm_init_root_sr' on servers ('192.168.20.253') failed. )
    but when edited again see solved problem but not HA feature work correctly(when shutdown server pool virtual machine is goes down )
    i test is with nfs server but not work i user iscsci target on RHEL5 for create iscsi server
    i see ha work correctly same az this
    2009-11-29 12:25:44     Check prerequisites to add server (192.168.20.253) to server pool (karkas) succeed
    2009-11-29 12:25:50     Check prerequisites to add server (192.168.20.253) to server pool (karkas) succeed
    Select     Server Pool Name     Status     High Availability Status     Servers     Users     Logs
    Select     karkas     Active     Enabled     Total: 2     Total: 1     View Logs
    and no error in /var/log/ovs/*.log
    but when add new server i see in status "error in adding server "" and when edited again see server add and active state
    1-i have no ocfs2 partition on my machine use iscsi initiator
    2-all server use root cluster id /var/ovs/mount/disk_id
    3-all permission set for everybody and 777
    any idea for solve this problem
    thanks

    hi
    and very thanks for your reply
    every this work good
    [root@OVS2-253-32 ~]# service o2cb online
    Starting O2CB cluster ocfs2: OK
    [root@OVS2-253-32 ~]# service o2cb start
    Starting O2CB cluster ocfs2: OK
    [root@OVS2-253-32 ~]#
    but see :
         During adding servers ([192.168.20.253]) to server pool (jojo), Cluster setup failed: (OVM-1011 OVM Manager communication with 192.168.20.254 for operation HA Setup for Oracle VM Agent 2.2.0 failed: errcode=50006, errmsg=Do 'clusterm_init_root_sr' on servers ('192.168.20.253') failed. )
    Select     Server Host/IP     Server Name     Server Type     Status     Server Location     Server Pool Name     Logs
    Select     192.168.20.254     254     Server Pool Master,Utility Server,Virtual Machine Server     Active          jojo     View Logs
    Select     192.168.20.253     253     Virtual Machine Server     Error          jojo     View Logs
    but edit this server work fine. i use doc in step by step configure and no error occur in configuration but still see this error on adding new server and HA can't works correctly (only when i power off virtual quest machine after 15 second this server goes up and live migration not work correctly )when i shutting down one virtual machine server guest still wait for powering up this server
    ocfs2 kernel module load correctly
    cat /var/log/ovs-agent/ovs_root.log
    StackTrace:
    File "/opt/ovs-agent-2.3/OVSXCluster.py", line 115, in clusterm_init_root_sr
    sr.initialize()
    File "/opt/ovs-agent-2.3/_storage/OVSFileSR.py", line 127, in initialize
    self.sp.mount(mp)
    File "/opt/ovs-agent-2.3/_storage/plugins/OVSFileSP.py", line 209, in mount
    fs_spec = self.get_fs_spec()
    File "/opt/ovs-agent-2.3/_storage/plugins/OVSFileSP.py", line 184, in get_fs_spec
    tgt_dev = get_dev_spec(self.fs_uuid, self.fs_spec)
    File "/opt/ovs-agent-2.3/_storage/plugins/OVSFileSP.py", line 82, in get_dev_spec
    raise Exception("No device found: dev_uuid=%s" % dev_uuid)
    are you have any idea for solve this problem ???
    very thanks

  • Configurat​ion Utility - Is this supported on new Thinkpads

    Can anyone confirm whether the Lenovo Configuration Utility is still supported on new Thinkpads. Looking at the Lenovo website it doesn't look as though anything has been updated since 2006 when the X60/T60 were current models.
    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-4ZFRG3
    If this is no longer supported what has this been replaced by if anything?
    Many thanks
    Paul
    Message Edited by paulw on 05-26-2009 04:53 PM
    Solved!
    Go to Solution.

    Hi Paul:
    Although I am no expert on this subject, I think that the "ThinkPad Configuration Utility" has been replaced by additional functionality that Microsoft built into the operating system of Windows Vista.
    There is now a tool (program?) that comes with Windows Vista called "Mobility Center".  This appears to include most of the functionality that Lenovo used to provide in the configuration utility.  Lenovo has released a little add-on tweak that gives the Microsoft provided Mobility Center a bit of extra functionality to control features that are unique to the ThinkPad, such as the keyboard light.  That Lenovo add-on is called "Mobility Center Customization", and it is available from the DDFM.
    For folks who are still using earlier OS, such as XP, there has probably been no need to update the ThinkPad Configuration Utility since 2006.  By this I mean that the XP operating system is fully mature, the ThinkPad Configuration Utility is fully mature, and it is unlikely that either will be updated again unless some problem is identified.
    Michael
    W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

Maybe you are looking for