Partition not showing up in XP setup HELP!!!

I created a 32GB (i also later tried 45GB) partition using boot camp. I then put in the windows xp install disk and click install as directed. Windows XP setup started normally and loaded a bunch of stuff. Then when I got to the screen to pick the partition there was only one partition named unknown. I have tried multiple times but i can't get it to find the BOOTCAMP partition. Please HELP!
Thanks

Anyone?

Similar Messages

  • Horizontal Spry Menus are not showing up in ANY browser HELP!

    www.tvnewsjunkie.com
    I am a novice web designer and I need help!
    The above site listed is the site I am currently working on. As you can see the menu bar...is not a menu bar at all but a long list of links along the left side.
    HOWEVER, when I click on LIVE VIEW in DreamWeaver everything looks fine.
    There should be 7 total menu bars with 7 Dropdown menu options each (except on the bottom menu bar which there will only be 4 I believe)
    What am I doing wrong??

    Thank you so much for your help!This matter is certainly closed.
    I just want to add, however, that somehow my Spry Assets folder was placed somewhere outside of the rest of my files! no wonder I was confused.
    Thank you again!
    Grant
    Date: Fri, 17 Dec 2010 23:43:25 -0700
    From: [email protected]
    To: [email protected]
    Subject: Horizontal Spry Menus are not showing up in ANY browser HELP!
    You have forgotten to upload the support files - SpryMenuBar.js and SpryMenuBarHorizontal.css - to the server.
    Gramps
    >

  • Istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me

    istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me

    Hi
    So these are EXS24 Sampler Instruments?
    If yes... the .exs Instrument files need to go in
    Library:Application Support:Logic:Sampler Instruments
    Or
    <User>:Library:Application Support:Logic:Sampler Instruments
    CCT

  • I m new t o iphone community , i tried to connect with itunes with my laptop, finally i did transfer my songs and movies to itunes but it is not showing in my iphone . plwease help me

    i m new t o iphone community , i tried to connect with itunes with my laptop, finally i did transfer my songs and movies to itunes but it is not showing in my iphone . plwease help me

    You need to sync your phone with iTunes on your PC. Read this article
    http://www.apple.com/uk/support/iphone/syncing/

  • I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

    I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

    The TIme Machine volume does not have that checkbox.
    I think the issue is with your Finder...
    Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
    com.apple.finder.plist
    com.apple.sidebarlists.plist
    Then, restart, or log out and in again.
    (You will have to reset a few finder prefs the way you like them.)

  • My ipod is disabled and say connect to iTunes when i connect to computer it say enter the pass cod but the ipod browser it's not showing ..any one can help me please, ty

    my ipod is disabled and say connect to iTunes when i connect to computer it say enter the pass cod but the ipod browser it's not showing ..any one can help me please, ty

    Place the iPod in Recovery mode and then restore

  • The address bar where I can type in internet addresses is not showing on my Mozilla, please help me with this.....how do I enable it?

    The address bar where I can type in internet addresses is not showing on my Mozilla, please help me with this.....how do I enable it?

    Thanks friends, I got it resolved at last.............kdwis

  • Ok so my ipod touch is saying theres no music on it but when i plug it up and get on itunes it says theres music on it but its still not showing up on my ipod. help anyonee??

    ok so my ipod touch is saying theres no music on it but when i plug it up and get on itunes it says theres music on it but its still not showing up on my ipod. help anyonee??

    Have you tried resetting your iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    Next would be to unsync the music and then try syncing the songs to the iPod
    - Last would be to restore from backup.

  • I recently ran adobe premiere cs6. I went to open recent project. It had loaded up but did not show any windows can anyone help me.

    I recently ran adobe premiere cs6. I went to open recent project. It had loaded up but did not show any windows can anyone help me.

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

  • Logical drive partition not showing in Mac OS.

    Hi all,
    I'm rather new to mac OS and am hoping someone could help me out with this problem.
    I've a windows partition (C:) running Vista Ultimate. In it, I had created 'logical drive' which contains a FAT32 (D:)and a NTFS (E:)partition. I'm thinking of using this 'D:' drive to share data between vista and Mac OS. However, when I boot up into Mac OS, both d: and e: drives are not showing (c: showing thought). I went into Terminal and use the 'diskutil list' command, it doesn't show me my D: and E: partition.
    Can anyone help?
    Thanks,
    Simon

    MacDrive7 allows 32-bit Windows to access r/w to HFS+.
    There is a Google kit for NTFS.
    I had terrible performance and luck with Paragon Software's NTFS for Mac OS X 6.0 ($30) and would not recommend it.
    If you are willing to start over, clone your Vista. Maybe WinClone or Norton Ghost.
    Reformat your internal drive with Disk Utility after backing up (Apple Disk Utility Restore).
    Don't use BootCamp and create Vista NTFS, FAT32 and Mac OS X. Don't install or restore OS X until AFTER you have Vista installed.
    BootCamp only allows for a 2nd partition and I'm not a fan of its methods and limitations.

  • Western Digital drive not showing up in disk utility--Help please.

    Hello all. This is my first post. I am having trouble with my WD 500GB external hard drive. It is not showing up in disk utility when connected either via the firewire or USB ports. I purchased the drive about 8months ago, brought it home and set it up as my Time Machine backup drive. It worked great for several months, until it got full. Then it stopped showing up on the desktop for no apparent reason. I discovered through reading support documents on the Apple web site that when I set the drive up initially I should have changed the partitioning protocol from master boot record to GUID, but I did not. I followed the apple web site instructions for making the change expos facto, but was instructed to press buttons that were "grayed out". As such, I couldn't do it. Perhaps foolishly, I thought that I would just start all over by reinitializing it, formatting it correctly (with my new found knowledge) and then do the time machine backup fresh. However, the drive no longer shows up in disk utility no matter how or in what order I connect it. When the drive is connected by firewire there is evidence of some recognition of the drive in system profiler, but it is listed as "External HDD Buttons and Lights". There is also evidence of the My Book showing up at a minimal level (eg. the firmware revision and a few other details are listed). On the front of the drive is a ring of blue lights that progress in a clockwise direction as soon as a connection is made via either firewire or USB. Before that it is solid blue. I have read through all the info that I can find on this site, and all the suggestions require the drive being recognized in disk utility. Without that, I am stuck. I know this must be a solvable problem, because the drive just a bucket of parts before it was manufactured. I just don't know enough to solve the problem or even know what qeustion to ask. I would really appreciate some help. Thanks in advance, and sorry for the long post.

    If you can't boot from an OSX DVD, it sounds bad. Yet I think you said you were running Disk Utility from the DVD?
    I got an external Firewire drive enclosure for 2.5 inch IDE drives from Other World Computing (OWC)
    http://eshop.macsales.com/item/Other%20World%20Computing/MOTGFW400/ but similar items are available from many vendors like Newegg. About $60 for the basic model. More money can buy additional interfaces on the enclosure like FW800 and USB2; an AC adapter instead of letting the firewire bus power the drive (usually OK).

  • Boot Camp partition not showing in startup disk or when holding alt key

    I've read countless discussions about similar questions to this one, however, I still haven't been able to find any solution.
    I have an old 2006 MacBook that has just been fully updated and reformatted. I'm running OSX 10.7.5 and Boot Camp 4.
    I went through the Boot Camp installation from an Windows ISO image in my usb drive, where it succesfully downloaded all files needed, and prompted me to make the partition, after which it restarted and was supposed to take me to the installation manager in the Windows partition. I first got the "No bootable driver" error, to which I read I was supposed to restart the computer, hold the alt key, and choose the boot camp partition. However, it does not show up. I only get Mac and Recover drivers.
    I went into the Mac's startup disk, and only the Mac driver is showing, no Boot Camp driver, however, when I go into Disk Utilities, I can see that the BootCamp driver there.
    I read somewhere that I should zap pram and reset SMC, which I did with their instructions. It didn't change anything, I still only get the Mac driver and Recovery when hitting the alt key.
    Does it have something to do with my MacBook being older? That's the only reason I can think that would not allow me to do this.
    Let me know what other info I can give you so that you can please help me!! Thanks in advance!

    In last resort I solved my missing BOOTCAMP partition problem using a program called: iPartition from coriolis systems located in the United Kingdom http://www.coriolis-systems.com/iPartition.php it took me a coupleof days to figure out the credit card system they have Hint: use your 9 digit zip code to find your credit card address and call your bank if you have an overseas hold on the card!!!! The program found my missing BOOTCAMP partition and restored it. It did take a couple of e-mails to learn to use their program. Let me know how you turn out!

  • Hard disk partition not showing up during window 7 install

    STOP - 0x00000116 error . I
    want to install fresh OS from usb stick but the hard disk partition is not showing up. Only USB stick is getting detected.
    Please help .. I have an interview and I need to fix this issue asap.

    Hi there,
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that your hard drive is not showing up, presumably as a bootable partition. I am happy to help, but I need a bit more clarification of your problem. You mention a 0x00000116 error as well, which is normally part of a Blue Screen of Death. Does this happen regularly as well, or is that the real complaint, that you are getting the 0x code and a BLue Screen on startup?
    That particular code is generally associated with a video driver problem.
    Is the hard drive you are trying to install to, a new replacement hard drive or the original hard drive?
    If you try to boot up the system, what error do you see?
    Are there any repeating flashing LED patterns, or beeping patterns?
    Assuming this is your original installed hard drive, did you try the recovery manager for the drive?
    Performing an HP System Recovery (Windows 7)
    Troubleshooting HP System Recovery Problems (Windows 7)
    Let me know, so I can better target my help to your situation.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • ProRes Setups in Custom Settings not showing up as Easy Setups 7.0.3

    Having trouble on a client's workstation:
    We have all of the "Additional Setups" copied into both the
    "HD>Library>Application Support>Final Cut Pro System Support>Custom Settings"
    as well as the
    "USER>Library>Preferences>Final Cut Pro User Data>Custom Settings"
    folders, but several of them do not show up at all in the Easy Setups dropdowns.
    Why is this, and how do I fix it for them?

    Best support for FCP I've found are here...
    http://discussions.apple.com/forum.jspa?forumID=939&start=0
    http://forums.creativecow.net/applefinalcutpro
    Have you tried trashing prefs? (thanks to Jon Chappell and the folks at Digital Rebellion)
    http://www.digitalrebellion.com/prefman/
    On last upgrade/update of FCP, did you do a full Archive/Install, or did you use Migration Assistant or upgrade/update directly over an existing installation?
    You might click on 'My Public Profile' at top right of this page and fill in some system specs...helps us help you.
    K

  • Bootcamp partition not showing at startup

    Hey guys,
    I upgraded my macbook pro to Lion last week and now I can't install Windows on my computer with Bootcamp. I can still partition through Bootcamp assistant, and in Finder it shows the Bootcamp device. However, when I try to install Windows by holding Option during startup, the Bootcamp disk is not showing up. There are only three options: Mac, Recovery, and Windows (disk). If I choose the Windows disk, it tells me there's no bootable device.
    Also, in Startup Disk in System Preference there's no Bootcamp option.
    Is the Recovery Disk screwing it up? Can anyone help me please?
    Thanks.

    Solved.
    I just installed clean BOOTCAMP using Bootcamp Assiastent, that causes windows data loss.
    Anyway, after formating bootcamp, i found a solution.
    get  iPartition and mark bootcamp partition "show in windows" option.
    i regret reinstalling windows

Maybe you are looking for

  • Possible reason for the iMac G5 with 10.4.3 Sleep Problems

    Ok first off let me say that I got this new iMac G5 20" about 4 days ago. It's wonderful. If anyone out there is holding out for the intel machines, don't wait, get a G5. It's a fantastic machine. Now on to the meat of the subject. The story goes lik

  • Error message when displaying a report in a windows form

    Hi, use Cr 2008.SP3 Fixpack 3.5, Visual Studio 2008 prof. editon version 9.0.30729.1 SP, :NET Framework 3.5 sp1 vb.net 2008 when displaying a report in a Windows form sometimes the following error message appears System.NullReferenceException: Object

  • Internet Sharing and Firewall

    I am having a difficult time using internet sharing to download files and access email using Mail. I can go online with my browser, but other services like Mail and downloading files doesn't seem to work. I feel like this is a firewall issue. Can som

  • Hotsync User ID being changed without input from me!

    As far as I know -- with evidence in my data directories -- when I got my Tungsten I set it up with the user name "Wendy". A couple of days ago, when I got a handheld software registration code based on giving that to the software vendor as my user n

  • Data Separator as semi colon in .CSV

    Hi Guru's, Will it be a problem if I use semi colon as data separator rather than using a comma????