Partition of windows 7 with failed bootcamp is nowhere to be found.

Today I wanted to install windows 7 on my macbook pro early 2011. When bootcamp assistand tries to partition the disk, it froze, and it quit itself. Now the 70gb partition is nowhere to be found.. In disk utility you can't even see that there are two partitions.
Thanks in advance.

So it doesn't give you the option to Remove Windows and or the boot camp partition?
If that is the case then your system may be hosed.
You could try using Disk Utility to merge that partition back into the main Mac partition but if that fails then you are left with one option. Save all your data and wipe the drive and reinstall.
I suspect there is something else going on with your system because if it was running correctly Boot Camp assistant would not of crashed and exited on it own.
So whatever caused that to happen needs to be corrected.

Similar Messages

How to fix blue screen of death of windows xp with a bootcamp hard drive

i have a macbook with intel 2 duo core with 4gb ram and 1tb hard drive with lepord on it i bootcamped the hard and installed windows xp and now i am gettind a blue screen of death. so i know there repair utlite on windows xp disc when you boot to it but can't do it on the mac it there a repair utlite for windows xp cause i can still into sindows xp for like an hour before it crashes

JFJ_595 wrote:
the start-up music still plays.
The POST for the hardware checks out then.
JFJ_595 wrote:
I turn on my computer and all i get is a blank white/grey screen. No logo, no loading symbol, just a blank screen;
Command+R does nothing,
Holding Shift does nothing
Press and hold the power button down to turn of the machine.
Press and hold the Command Option R keys on the built in keyboard and press the power button, you have to be near your high speed Internet connection.
If you get something like "Install OS X" do that, it will overwrite your old copy with a new one and not touch your files or most programs.
If you can't install OS X, head to Disk Utility and First Aid > Repair Disk and Permissions and try reisntalling OS X again. (do not erase the drive as this will wipe your data off, unless your sure)
If you still get the white/gray screen with nothing while holding the Command Option R keys at boot time, I suspect your EFI firmware has been borked somehow and it's not loading to respond to the at boot key commands.
We are able to reinstall the EFI firmware ourselves, but the current method requires a machine with a internal optical drive. This problem occurs so rarely that it's not been used much and certainly unknown how well it works off a USB thumb drive, which is what I suspect the Apple Store/Repair will do.
Since your under warranty, I would have Apple replace the EFI firmware and check the machine out for hardware issues as well.
Buy AppleCare and a external drive for TimeMachine backups.

HT3986 installing windows 7 with bootcamp It doesn't install, telling me that the partition made by bootcamp is not formatted in NSFT. What to do now?

after having made a partition for windows 7 with bootcamp, it couldn't be installed with the message that the partition needs to be formatted in NSFT.
What to do now?

Start again and follow the Bootcamp installation instructions http://www.apple.com/support/bootcamp/. You can print he instructions from within Bootcamp Assistant.

Installing Windows 7 with boot camp as whole partition on 2nd internal hard drive

Hi all,
I am unsure what is the recent changes with Apple boot camp. But when I used boot camp utilitiy on my Mac Pro (Mid 2010) to install windows 7 64 bits. It would not install and created a whole lot of problems.
After I initialise the process to install windows 7 using boot camp utilities, I chose the option to create a single partition to installl windows 7 on my secondary internal hard drive (1TB). After I restarted my Mac Pro and started the Windows 7 installation process, I was unable to install Windows 7 on the BOOTCAMP partition created by the boot camp utilitiy. I got an error something about Windows cannot be installed on the selected forum because the driver contained GPT details.
I tried to format the BOOTCAMP partition, but it ended up with errors. I tried to delete and recreate the BOOTCAMP partition in Windows setup, but failed with errors again. As I could not go any further with the Windows 7 installation, I had to hard reset my Mac Pro and tried to reboot back into Mac OS X Lion and that's when the nightmare begin.
Not only I could not boot into OS X, I could not use any of the startup key combinations (i.e. Hold option key to select start up disk, option + R to boot the lion recovery drive, not boot from any external firewire drive installed with OS X Lion). Basically none of the key combinations worked except for the holdingi F12 and mouse key to eject CD.
The only thing I could boot the Mac Pro with is the windows installation CD and Linux Ubuntu Raring Distro. I can install the ubuntu distro without any issue. However, I could not boot my mac pro back into OS X as Linux does not support bootcamp. The only way I could use Mac OS X Lion again is to delete the partition OS X Lion was installed on, and then I was be able to install Windows 7 without any issue.
After installing windows 7 I would have to download boot camp and then use the boot camp control panel to restart in the Mac Pro installation DVD and I will have to reinstall OS X again. After installing OS X, I went to System Preference and tried to select Windows 7 as startup disc. But I failed to as it says "Windows 7" Was installed via another utility. I would have to erase the partition and reinstall Windows 7 again using bootcamp utility. If I try to install windows 7 again, the horror I described above repeats again.
From my understanding, the Boot camp utility creates a new EFI bootrom with Master Boot Record (MBR) in FAT32 format. Therefore I could not boot back into Mac OS X without using boot camp in windows 7 as none of the boot combinations key worked.
I want to ask if anyone is experiencing the same issue as i do, and if there are any solutions to the problem I am experiencing. I never had such issue before. I was able to install Windows 7 on my 2ndary internal hard drive without issue using boot camp. I don't what has changed. I have googled for solution, I only found something related to XOM but nothing else.
If anyone can provide me with any help in regards to installing Windows 7 as a whole partition on a secondary internal hard drive. It'd be grealy appreciated. Thank you in advance.

If you have driver issue, just pre-download the boot camp drivers and save them on an external drive or burn them onto a cd, you will be able to load drivers via the advanced installation option during windows setup, that is if your osx partition isn't actively preventing you from installing win7 on the BOOTCAMP Partition created by boot camp assistant, I find this rather ironic, took me 3 days to figure out this issue, I was stuck without being able to boot into anything beside the windows cd, which wasn't even helpful as I could not install windows as I did not want to delete my osx partition. I lost all my data becsuse of it, as I had no idea what was going on. I tried to recover the partition using testdisk, hfsprogs and gparted in ubuntu life cd but they dont support HFS+. As I could not access osx terminal (couldn't even boot into osx installation dvd with that dreaded MBR created by boot csmp). I could not use pdisk in terminal to restore the osx partition map. Though luck for me. Called applecare and they had no idea what the problem was, and as usual they orgsnised for hard drive replacement. But it was clearly a software issue.
They will have to fix bay2 for me as I can no longer detect any hard disk connected to that bay.

Multiple partitions in windows XP

Is it possible to create multiple partitions in windows XP with boot camp?
Pls Anyone Help.

Tuhintt wrote:
Is it possible to create multiple partitions in windows XP with boot camp?
Pls Anyone Help.
What do you mean by "in Windows XP?"
You need to clarify.
Do you mean you want to split the XP partition into several smaller partitions, with parts of XP in each one?

Hi, I've been trying for days to download Windows support software via Bootcamp assistant, but it always failed with message 'Can't install Windows Support Software because it is not currently available from the Software update server.' Any advice welcome

Hi,
I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
Anyone else had problems or success with this?
Thanks in advance.

9thdoc wrote:
I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
You need the Snow Leopard installation disk or a replacement for it.

I have a macbook retina with a partition of windows 7 and Yosemite. When I use time machine in Yosemite it wont recognise the macintosh HD, but it recognises the windows hd ( bootcamp). Does anybody know why ?

I have a macbook retina with a partition of windows 7 and Yosemite. When I use time machine in Yosemite it wont recognise the macintosh HD, but it recognises the windows hd (bootcamp ). Does anybody know why ?

Please provide a bit more detail on what 'recognize' means. A screen shot is always very helpful.

The guide to bootcamp assistant states that bootcamp can only be installed on a drive with a single partition. New Macs with Lion preinstalled have two partitions - the second is a recovery partition. How do I install Bootcamp?

Late in August 2011 I took delivery of a new 27" iMac with Lion preinstalled. I need to run Windows as well. Following Apple's written suggestion, I printed off the then current 12 pages of the document "Bootcamp Installation & Setup Guide" which clearly stated that the hard drive you were going to install on had to have on it, before install, a maximum of one partition. Using finder and disk utility I determined that there was only one partition. Unbeknownst to me, there was (is) an additional hidden (from those two pieces of software) partition on the disk. As of machines delivered new with Lion preinstalled, Apple has begun to include a "recovery partition". In that partition there is a copy of the software necessary to reinstall Lion via a download from the Apple App Store. Not knowing the partition was there, I cranked up "Bootcamp Assistant" which nicely offered to repartition my hard drive creating a "Bootcamp Partition" in addition to the existing. I told it how big to make each and hit the do it button, subsequently destroying my operating system. Oh, it very nicely told me, after the damage was done, how many partitions were REALLY on the disk and that I could not install Bootcamp cause there were too many partitions.
Luckily the the Recovery Partition, which at that point I knew existed, was not harmed and after doing some research on another compter, I used it to once again download Lion from the App Store and reinstall. So, I have recovered but am still stuck with the problem: how do I install Bootcamp in this new environment?

First you need to seriously back up your Mac.
A clone is an exact duplicate of your existing Mac HDD. Merely copying and pasting a drive will not make a bootable backup. In case of problems you can boot from an Ext HDD clone and use the utilities to repair, reformat, or clone the Ext HDD back to the internal Mac HDD. While Time machine back ups are easy you can not boot from it. The best thing to have for any kind of problem is a bootable clone backup on an external drive. Some even have two external backup drives in case one fails. There are two good apps for cloning named SuperDuper and Carbon Copy Cloner.
In dealing with the recovery partition a simple approach is to clone the Mac partition to an external disk then re-partition the Mac to a single partition (GUID partition table) . Then clone the external disk clone back to the Mac. You will now have only one Partition and Boot Camp assistant sould not object.
Some have recommended getting rid of the recovery partition while others have advised not to do this. If you have the Lion USB Thumb Drive you do not need a recovery partition so can discard it without concern. There is another way to get rid of the recovery partition if you decide to do it but first be sure to have a backup of your Mac ( I know I sound like a nagging mom but many dead computers have been saved by this simple precaution).
Use Disk Utility.
1) Make the Recovery visible in Disk Utility by using a program like Secrets:http://www.macupdate.com/app/mac/27025/secrets or MacPilot:http://www.koingosw.com/products/macpilot.php (15 day free trial).
2) Highlite the Recovery partition and Control click it and select Mount the partition.
3) With the Recovery partition highlited, erase the partition, you'll get an error message, ignore it.
4) Now highlite the top identity of the hard drive and select the partition tab.
5) Highlite the Recovery partition and press the minus sign.
6) Click and hold on the bottom edge of the partition above and drag it to the bottom, if it doesn't go there automatically, the press apply.

During Windows install, says the Bootcamp Windows partition is incorrect file system and won't install

I had another Macbook Pro retina which I installed Windows 8 on with no problems via bootcamp. I just updated to the late 2013 model of the Macbook Pro, and attempted to do the same thing but have had problems. I create the partition for Windows with Bootcamp, restart the computer, and after I enter my security key in the Windows installation screen it comes to the screen where you have to select the appropriate installation drive. When I select the drive I created for Windows, it says that it can't install due to the file system. I have no idea why I'm having this problem because I had done this once before....I can't for the life of me figure out what's wrong and I'm at a loss.
If anyone can point me in the right direction I will greatly appreciate it...also let me know if there are differences from the early 2013 model and late 2013 model that would've created this problem. Thanks!!
Robert

Well, here is what happened...
Somehow in making a Windows partition then removing the partition so many times I created an error where it only showed 1/2 of my hard drive...like it was starting to create the second half for the windows side and ran into an error.
So this turned out to be a blessing in disguise, because what I had to do was go to "Command + R" when I was starting up and format the entire drive, all 500 gb. This formatted the whole drive and must've erased whatever was causing the trouble.
Of course, then I had to reinstall OS X, and reinstall my Time Machine backup, but then I opened bootcamp and created the Windows partition again. This time, when I ran the EFI installer you were referring to on the far right (which I had tried before), it allowed me to click next and continue once I selected the Windows partition. Thank God! It must've fixed whatever file system error was hanging it up there every time....because it's installing now.
What I would suggest if all else fails, just format the whole dang thing. Then try from square one and see if you can install

How to recover HD space from 2 failed Bootcamp/windows installs...?

Hi,
I'm running OSX ver. 10.6.2 . I had 2 failed attempts to installing windows XP-Pro on Bootcamp.. 3rd one worked.. but the initial 2, left HD wasted space. not part of the OSX installation and not part of the windows installation.. they are both a little over 150 Mgs. I know, I know.. not much. but it bothers me..
Anyone knows how I can recover that space into the OSX partition?
The windows installation is using the basic 5 G's.
Thanks

you can try repairing the OS X partition with disk utility. boot from the snow leopard dvd and use disk utility there for the task. you should have done that after the failed windows installs. then you can try resizing the OS X partition to cover the missing free space. but if that does not work i would suggest you don't force the issue and leave it be. you can easily brick the OS X partition doing that.

Trying to install Windows 7 with Bootcamp on my Macbook with a faulty CD drive

I am trying to install Windows 7 with Bootcamp on my Macbook A1278 (OS 10.6.8) with a faulty CD drive (CDs and DVDs get stuck in it and I had to get it removed in an Apple store, so I don't want to use it anymore). I have got a licence for the product but I am only in possession of the ISO, is there any way to install it using a USB stick?
I don't have many options while launching Bootcamp, only
"Download the Windows support software for this Mac" but when I try I get a message explaining me that the download could not continue as the software is not available,
or
"I have the Mac OS X installation disc [...]" but obviously I can't use my CD drive so this is not an option. I tried it anyway and I created a Windows partition but when asked to "start the Windows installer", I can only continue by insering a CD.
I tried to use a USB stick and added the ISO on it but nothing has changed.
How can I install my copy on Windows?...

BobTheFisherman > Hem, yeah, that is stating the problem and not working toward resolving it.
Turbostar > I checked the link and it seems to be relating to the first video I have seen on the subject. I tried to install Tuxera then to work with rEFIt, but I did not get any result yet (I don't know if I am doing something wrong during the USB writing process as many different ways are explained on different websites).
So far my last try was to launch Windows 7 USB DVD Download Tool on VMware Fusion but it the only disk shown is A:\ Removable disk (not the name of my USB) and it is stated that the disk is being used by another program, even though it's not open on the Mac side.
Some websites are advising to write the copy of windows on a USB via a PC and then launch it on the Macbook, so I might try that in the next few days. I will keep you updated.
If anyone has another option I might not have think about, or an advice on how to efficiently create a bootable Windows setup USB with my Mac, please let me know!

When I reboot in Windows 7 partition, it comes up with an error.

Hello all,
I have recentry formatted my Primary Partition for windows 7, and when i reboot to the HHD, it comes up with an error; "Windows failed to start. a recent hardware or software change might be the cause".
Under i get some options;
1, insert the installation cd
2, choose language settings
3, click repair
Under that i get this;
File: \Boot\BCD.
Status: 0xc000000f.
Info: An error occured while attempting to read the boot configuaration data.
I have previously performed numerous steps such as moving and copying the BCD store to another partition and i also tried bootrec.exe in command prompt, when i select repair system, but nothing worked. I have also tried rebooting with the windows 7 installation cd and i also tried to perform a clean install, but it stops with an error after i reach 24% at the expanding files bit of the installation, therefore it fails and restarts again, this too, hasn't worked.
Now i am stuck with the operating system that cannot start, and the BCD store that cannot be moved/reset somewhere else.
Please, can someone help me with this error? Thank you very much.

ERRORS WIN: iPhone iPad Ipod Touch Connection Error
OxE = http://support.apple.com/kb/TS3221

I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout is greyed out and is stuck on 'Current'. What can I do?

I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout in Disk Utility is greyed out and is stuck on 'Current'. What can I do? I was trying to install Windows 8.1 but apparently, this is not yet possible.
I was originally able to restore to my original Mac OSX partition using Boot Camp Assistant but then after entering Disk Utility and re-RAIDing the default RAID 1 to RAID 0 in the BootCamp partition (I suspect this is the cause of the problem but why was it defaulted to RAID 1 in the first place?!!!!), forever afterwards, I couldn't restore the single OSX partition.
Whenever I used BootCamp Assistant my choice to 'Install or remove Windows 7 or later version' was greyed out. Finally I went to Disk Utility to repartition but the Macintosh HD and BootCamp disk partition functions were also greyed out (even if I started up from Recovery mode holding down option, command and 'R' and choosing Disk Utility). BootCamp Assistant gives the error message 'The startup disk cannot be partitioned or restored to a single partition' with additional small script 'The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows', and DU gives the error message 'The full size of the Fusion drive is not available for repartitioning'.
What can I do to fix this problem? How can I make the Partition Layout button active in DU so I can change the partition to all OSX? I'm prepared to wipe off all my data etc to repartition and have backed up all to disk using Time Machine.

My problem is fixed now, thank you. It was caused by my changing the Boot Camp partition's 'RAID1' to 'RAID0'. If I hadn't done that, Boot Camp would still have been able to 'restore' back to the one partition. It was fixed with the help of Applecare by using a terminal and typing a command to erase the IP of the Macintosh disk (not the volume) as well as the IP of the Bootcamp partition (if I remember correctly), but then I had to restore the OS and all my applications and data etc which I had previously backed up using Time Machine. I haven't taken note of the exact command terminology used. It would be wise to speak to Applecare about this if possible.
Two words of warning, 1. According to the cause of this problem, it might be wise, after reinstalling the ops system to reinstall all extra applications one by one, manually, in case a similar problem arises again. Then manually copy back all data. Or the Mac user could use the Time Machine backup and then uninstall all the added apps then re-install them one by one manually. 2. Beware as after all this the user might not have the 'Recovery partition'. There is a small recovery partition (a few 100 Mb is size) which comes with all later Macs. After all this is done this tiny partition might not be there anymore and the user might have to re-install Mavericks again to get it back, or just install the upcoming update of Mavericks due in a month or so.

How to have two partitions in windows 7 using bootcamp?

Hello everybody,
I've just recently bought a new MacBook Pro, I'm not very familirar with Macintosh. I installed windows 7 using bootcamp but the problem is that I just can see one partition in which I've installed windows.
actually, I want to partition my 500GB disk to three different partitions as following:
1) 70GB for Mac
2) 80GB for Windows
3) 350GB for Data
so that I can have third partition both in Mac and Win.
I searched internet and I found a few documents about it and I followed the instructions but I had no luck of success. one of the instructions I tried is: http://davidseah.com/index-ee.php/wikilab/Creating-2-Windows-Partitions-with-Boo t-Camp/
Any suggestion would be appreciated.

1: Those instructions at the link are severely outdated. Don't use them.
2: Apple expects users to have one Bootcamp partition, one OS X Lion partition and that's it and that's all they are going to hold your hand on.
(note: there is also a hidden EFI and a Lion Recovery Partition also on the drive.)
Anything beyond that is getting into major geek terror-tory.
Of course it's possible, I had my 15" with 7 partitions and booting 4 other operating systems from Lion, Snow, Windows, Linux (with a Linux Swap and a exFAT data). But I had to wipe the entire drive, set up the partitions install a alternate EFI boot program (a program that resides in firrmware) and then install each OS in each partition.
Since your new to Mac, you should really hold onto Apple's hand and use either a external drive formatted either FAT32(MSDOS) for under 4 GB files sizes (preferred) or exFAT for over 4GB files (not preferred but necessary) in Apple's Disk Utility.
Windows is as you know, formatted NTFS and OS X is formatted HFS+ Journaled as their partition data formats.
There is software for Windows called MacDrive which will read and write HFS format, and there is software from Tuxera that will allow OS X to read NTFS format.
There is a security issue allowing Windows to read HFS, but that should do transferring the small amount of files your going to be using in both operating systems.
OS X, like Windows, is going to expect files to be in each respective User folders of Music, Pictures and so forth when you open save dialog boxes, open finder windows, open certain programs and so forth. So ideally it's not best to share a partition or really have the user data on another partition at all.
I know it's a practice on Windows machines to partition data away from boot/programs to reduce defragmentation, on OS X it's not as necessary (except in special cases) as all 2GB sized files and below are written to one space on the drive (if there is room of course)
Windows 7 still needs to be defragged, however it can be schedualed and you can watch the progress. If you install WIndows, perform all the updates, then install programs, then finally any files you do keep there, it should stay optimized for a quite awhile. Ditton on the OS X side.
If your going to sharing a grreat quantity of files between the two OS's, use a external drive.
Apple installs a hybrid MBR in the Bootcamp partition for Windows to use to interact with the GUID partition table (GPT) it uses.

Can i install windows 7 via bootcamp (MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air. In bootcamp i allocate the partition then i click install and bootcamp will not see the disk.

Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?

I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?

Partition of windows 7 with failed bootcamp is nowhere to be found.

Similar Messages

Maybe you are looking for