Partition table corrupted after installing OSX10.8.3
I installed OSX 10.8.3 from the Mac App Store on Friday and after installing, my macbook rebooted and a grey bar appeared at the bottom of the screen like it was updating the EFI...
After waiting the bar to be full (apprx 45 minutes), it simply stopped...
I tried restarting and the bar reappeared... So I decided to reboot in Verbose and saw my disk being repaired once, twice, 3 times and then nothing more...
I then booted on my one week old clone on an external disk (thank god I had one) and checked the internal disk with the following :
Disk util (GUI)
Disk util (Terminal)
Testdisk and pdisk
Data Rescue 3
Everything seems ok with reading the information on the disk, but impossible to mount/unmount the OS X partition
But the partition table is not right...
I need to be able to use my computer so I might erase and reinstall everything today,
But if someone has an explanation to this mess I want to know it...
Macbook Pro early 2011
2.7GHz Intel i7
RAM 8Go
I tried burning the firmware updater to disc, but I when I try to boot from it, it says "No bootable device — insert boot disk and press any key.” This is with a an external firewire dvd burner. But I also tried the same disc with another MBP that still has its original internal superdrive, and I got the same error there. That MBP can boot from the Crucial SSD firmware disc though, so I don't know what the deal is.
I'd gotten rid of my bootcamp partition a good while ago since VMWare had been taking care of any Windows needs I had just fine, but I still had a Winclone backup of my old bootcamp partition. So I restored it to a new partition, booted into Windows 7, and installed the Intel SSD Toolkit. But every time I tried to run it, it just crashed on me. I watched it in the task manager, and it would appear in the process list for a while and then just disappear.
I've already ordered a bigger Crucial M4 to replace the X-25M (it was getting a bit full anyway), so I hope things go better with it. Thanks for trying to help though, everybody.
Similar Messages
-
Is my partition table corrupt? Why does Boot Camp hate me?
Hi folks
I have an iMac (27-inch, Mid 2010) (iMac11,3, with Boot ROM IM112.0057.B01).
I replaced the internal SuperDrive with an SSD, which is now my primary boot device:
iMac:/ michthom$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *250.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS SSD 248.1 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
iMac:/ michthom$ sudo gpt -r -vv show disk0
Password:
gpt show: disk0: mediasize=250059350016; sectorsize=512; blocks=488397168
gpt show: disk0: PMBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 488397167
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 484620800 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
485030440 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
486299976 2097159
488397135 32 Sec GPT table
488397167 1 Sec GPT header
So far so good.
I want to use the original internal HDD both to run Windows in Boot Camp mode, and to have a partition for my bulk data that doesn't need to be on the SSD.
I reformatted the HDD as a single HFS+ partition, GUID partition table.
I used BCA to create a Windows USB boot device from the Windows 8.1 media after following the hacking in this link.
When the iMac restarted after creating the 250Gb Windows partition on the internal HDD, I got the "no boot device" screen.
I restarted holding Option/Alt and booted from EFI Boot on the USB stick. Windows installer started, at least. Serial number accepted, on to picking a location.
The installation balked when I tried to select the BOOTCAMP partition, with the warning that the disk was formatted as MBR - eh? Why?
So, the current state of the internal HDD must be wrong somehow, but I don't see how to fix it (confidently) and would like someone to point me in the right direction (please!)
iMac:/ michthom$ diskutil list
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS Internal 751.9 GB disk1s2
3: Microsoft Basic Data BOOTCAMP 248.0 GB disk1s3
iMac:/ michthom$ sudo gpt -r -vv show disk1
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1468478336 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1468887976 263256
1469151232 484372480 3 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712 1423
1953525135 32 Sec GPT table
1953525167 1 Sec GPT header
gdisk has this to say:
iMac:/ michthom$ sudo gdisk /dev/disk1
Password:
GPT fdisk (gdisk) version 0.8.10
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Command (? for help): x
Expert command (? for help): o
Disk size is 1953525168 sectors (931.5 GiB)
MBR disk identifier: 0x4F5BB38B
MBR partitions:
Number Boot Start Sector End Sector Status Code
1 1 409639 primary 0xEE
2 409640 1468887975 primary 0xAF
3 1469151232 1953523711 primary 0x0B
Expert command (? for help): p
Disk /dev/disk1: 1953525168 sectors, 931.5 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 3E1D7EF9-F86E-4552-8F40-BE9754C3C73F
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1953525134
Partitions will be aligned on 8-sector boundaries
Total free space is 264685 sectors (129.2 MiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI System Partition
2 409640 1468887975 700.2 GiB AF00 Internal
3 1469151232 1953523711 231.0 GiB 0700 BOOTCAMP
Any help / pointers gratefully accepted!
MikeThanks to Loner T and some more reading, I think I'm now sorted out.
I found that marking the first partition on the USB stick as Active made no difference - my only option was to boot from the "EFI boot" option at startup (when holding down the alt/option key).
So to get the Windows installer to behave, I used gdisk to write a new protective MBR before rebooting to the USB stick, as shown below.
With the protective MBR in place (rather than hybrid), the Windows installer was happy to reformat the chosen partition and the installation began.
I'll try to report back once all is installed and working, but once again I owe my sanity to the generosity and patience of strangers!
Mike
bash-3.2# gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.10
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Command (? for help): x
Expert command (? for help): o
<snipped>
Number Boot Start Sector End Sector Status Code
1 1 409639 primary 0xEE
2 409640 1468887975 primary 0xAF
3 1469151232 1953523711 primary 0x0B
Expert command (? for help): p
<snipped>
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI System Partition
2 409640 1468887975 700.2 GiB AF00 Internal
3 1469151232 1953523711 231.0 GiB 0700 BOOTCAMP
Expert command (? for help): v
No problems found. 264685 free sectors (129.2 MiB) available in 3
segments, the largest of which is 263256 (128.5 MiB) in size.
Expert command (? for help): x
<snipped>
n create a new protective MBR
<snipped>
Expert command (? for help): n
Expert command (? for help): w
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/disk0.
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Warning: The kernel may continue to use old or deleted partitions.
You should reboot or remove the drive.
The operation has completed successfully.
bash-3.2# gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.10
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): x
Expert command (? for help): o
Disk size is 1953525168 sectors (931.5 GiB)
MBR disk identifier: 0x00000000
MBR partitions:
Number Boot Start Sector End Sector Status Code
1 1 1953525167 primary 0xEE
Expert command (? for help): p
<snipped>
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI System Partition
2 409640 1468887975 700.2 GiB AF00 Internal
3 1469151232 1953523711 231.0 GiB 0700 BOOTCAMP -
OS X partition becomes corrupt after switching from Bootcamp
So I've had to reinstall os x 10.9.1 no less than three times this week and multiple times before in the past after switching between os x and windows 8.1. This usually happens after I've been using windows for a prolonged period then switch back to os x but it happened today after reinstalling os x from a time machine backup just yesterday. I'll switch between the two and os x becomes corrupt and begins the loading bar sequence after selecting the os x partition via the refit boot manager. I tried repairing the partition using disk utility from the repair partition and an external installation of os x 10.9.1 but every time the disk becomes corrupt and needs to be wiped and reinstalled or install a time machine backup. I've lost count of how many times I've had to do this and to make things even worse both of my external disks have become corrupt after being disconnected for two days while I sort this mess out. Does anyone else have similar issues or can locate an issue somewhere?
Yeah I reinstalled osx 10.9.1 and installed all my apps, put everything back then used bootcamp to create a partition for windows then used wineclone to install my windows 8.1 backup. I jumped from windows > osx > windows > osx inside an hour to move around a few things and I forgot verify bootcamp after I installed the backup and that last time I booted to osx it was corrupted. I used disk utility from my external installation and the recovery partition and both times they need repaired which only came up with the backup and wipe notification window. There have been two occasions where I was able to fix the osx partition from my external osx installation and continue using osx quite perfectly but usually the partition becomes un-mountable after it fails to repair. Usually when this has happened the twenty something times before it's after a prolonged period of a few weeks using windows.
I'm using refit boot manager and paragon NTFS 11 which may be the only software I've installed that could be corrupting the boot.
SMART status is verified -
I recently purchased MacBook Pro 13" (Late 2011) model with OS X v10.7.2 Lion installed. I've upgraded to OS X v10.7.3 Lion and updated all other software.
I require Windows 7 for some Windows based softwares that do not support Mac OS X. Therefore, used Boot Camp 4.0 to install Windows 7 and then tried partitioning single internal HDD to have 3 partitions (4 total including BOOTCAMP partition). Disk Utility created a 648.5MB partition and then I was able to create 3 other partitions of custom sizes. After applying these changes, I got an error message that said selected volume size is too small. I resized this 648.5MB partion to a custom size and had total 4 partitions, including BOOTCAMP.
After reapplying these changes, BOOTCAMP partition was removed and I was left with only 3 partitions and empty space.
I've tried several different ways to partition the disk, all in vein. Is there a way I can partition my single internal HDD after installing Windows 7 Professional via Boot Camp 4.0?You can't do what you want with GUI utilities, which will only allow a total of 4 partitions due to the limitation of MBR needed to support Windows. Those four partitions: EFI System (hidden), Mac OS, Recovery HD (hidden), Windows. So with Lion, you only get two visible partitions if you're going to use Windows with BootCamp. You can't make anymore with the included graphical tools.
If you need more partitions you'll need to use something like GPT fdisk (gdisk) to create the partitions in the GPT first. Then add the Windows partition only to the MBR and flag it as bootable. gdisk can be googled and downloaded for Mac OS X off sourceforge. It is not a GUI tool.
You should read this:
http://www.rodsbooks.com/gdisk/
And this:
http://www.rodsbooks.com/gdisk/hybrid.html -
ITunes corrupted after installing iLife 08
I can no longer launch iTunes following install of iLife 08. Error message says "copy of iTunes corrupt or not installed properly" "Re-install iTunes".
Is teh solution as simple as downloading iTunes 8 from the Apple site? How might this affect my existing iTunes library and authorization?Same here. I recently had a memory module go bad and a bunch of stuff got corrupted, so I had to wipe the disk, install new memory, and reinstall everything starting with OS X. Since all of my old iLife apps were gone (They were not on the disks I got with the Mini), I had to get iLife '08.
Before I installed iLife '08 I recovered my iTunes library from my 30 GB video iPod using TinkerTool, and it all worked fine. After installing iLife '08, I got the "iTunes is corrupted or not installed correctly" error message (Oh NOES!!!11!!).
All you have to do to fix this is, 1) Download iTunes 8.0.1 from Apple, and, 2) click on UPGRADE. Your iTunes library will still be there (Mine was, anyway).
Cheers,
George -
MSI FX 5200, in game 3d objects corrupted after installing latest driv
VGA : MSI Geforce FX 5200 TDR 128
I installed the driver for my vga card from MSI official site.
after installing all in game 3d objects are corrupted.
the version of the new driver is 4403.
why this problem occures?
how do i can fix it?
offcourse vga card works properly with the previous driver.which version driver that you download from MSI Website...?
try download MSI version 4403...not the Nforce version 4403.. i dont face any problem with the MSI Version 4403
MSI K7N2 DELTA-L
AMD ATHLON XP 2200
MSI FX 5200 VTD 128MB
COOLERMASTER X-DREAM HSF
2 X 256MB DDR RAM GEIL PC2700
CREATIVE S.B LIVE 5.1 SOUNDCARD
MSI 52X CD-ROM
LG CR-WRITER 24X10X40X
FLOPPY DISK
56K MODEM
40 GB HDD SEAGATE BARRACUDA 7200RPM
10 GB HDD MAXTOR 5400 RPM
450 WATT PSU WITH 2 FAN -
How to recover partition with osx after install
yea so i decided to install win 7 using bootcamp and made a partition for 50gigs. after following instructions the win 7 install menu came up were the partitions are located, and on the bottom it showed the partition i made for 50gigs that read (bootcamp partition) or something similar, anyways i clicked on it and it told me that win 7 could not be installed on that partition. so i clicked on advanced and then clicked on "format" again to reformat the partition again. after win 7 was installed succesfully and a few reboots later i cannot access or even see osx anymore. i know what and why its not showing up i just dont know how to reinstall the bootloader to access the partition again. does any dual boot loader work ok or what is the best way to make this work. thank you for any help in advanced.
When starting the system hold down the Option/Alt key to get a boot selection screen. Select Mac OS X to boot from. If by chance there is no OS X boot selection then you formatted the wrong partition and wiped out OS X. If that is the case you'll need to start over reinstalling OS X or restore from your Time Machine backup.
-
MAX 14.0 broken and database corrupt after installing LV2014 and latest device drivers
I have LV2012 and 2013 (both 32-bit) installed on my Win8.1 64-bit system and have used them without problem. I recently went through the agony of installing LV2014 32-bit from Dev Suite 2014 DS2 and the latest device drivers from the August 2014 DVD, and now MAX (v14.0) does not work. Firstly, it is slow to populate the System information display, secondly when I try to expand a tree I get a MAX Database Connection Error (see attached), and there is no software listed at all. Thirdly, devices are not listed properly even though appearing in Device Manager (eg. a CAN interface no longer lists CAN0 but does show the device but no configuration, same for USB DAQ devices I(see attached), and I do have CAN 14.0 installed), and there is nothing under Data Neighborhood.
Initial attempts to install LV2014 were prevented by the NI mDNS Responder and related services not stopping when required by the installer. This also affected attempts to repair MAX.
All 3 versions of LabVIEW run OK, but projects no longer include remote or RIO/FPGA hardware - possibly due to uninstalled support software - but without the software list in MAX I cannot tell what is and isn't installed.
I have performed a Reset Configuration Data, repaired MAX several times, uninstalled it (any all dependencies), turned of the firewall and virus software, and completely reinstalled LV2012, LV2013, LV2014, and device drivers, but with no change to the problem. I have now lost 2 whole days and I am getting desperate for a fix. Surely this cannot be the only case of this in the whole world.
Mike
CLD & Alliance Member, UK
Solved!
Go to Solution.
Attachments:
MAX problems.jpg 218 KB
NI mDNS errors.jpg 102 KB
MAX Devices.jpg 83 KBHi Dr.M
In order to workaround and repair your MAX problems , please see the following article (the Knowledge based article mentionned in the error):
I know you have been through a couple of these steps , but there may be some related links that could help as well.
http://digital.ni.com/public.nsf/allkb/B9107A7F281F9B408625720B0078E5A8?OpenDocument
As for your installation errors:
This error happens when a service gets hung up in a "stopping" state that does not allow the installer or uninstaller to remove it. This can happen with a number of different services, but it has appeared to happen mostly with the Lookout Citadel Server (lkcitadel server) and National Instruments Time Synchronization (lkTimeSync).
-To resolve the issue, open up the Services application by going to Start»Run and typing "services.msc" without the quotes. In the window that opens, find the service that the error message references. It will usually have a status of "Stopping."
-Double-click on the service to open the service's properties window as seen below.
-Try clicking Stop to stop the service. If this does not stop the service, set the service's type to Manualand restart the computer. It is safe to set the service to Manual because it will be started manually if it needs to run. After the restart, the service will not start automatically and you will be able to install or uninstall your software as necessary.
As for the devices not being visible have you downloaded the NI DAQmx drivers correctly(after installing LabVIEW).
Regards,
Mark
Applications Engineer Intern
National Instruments UK and Ireland -
Podcasts subscriptions corrupted after installing iTunes 5
I have my podcasts set to update manually and after installing iTunes 5 I noticed that when I try to update them iTunes showed there are no new episodes when clearly (and iTunes podcast directory confirmed it) there were.
Then I noticed "subscribe" button in the podcast directory's page for my podcasts was active and after i re-subscribed to all of my podcats (for example TWIT) iTunes added an identical TWIT podcast entry to my podcasts list and started re-downloading ALL of the podcasts i already had along with the new episodes.
So now i have a choice of either having to re-download all of my podcasts in order to get new ones OR be without new episodes untill this is fixed. And re-downloading all of my podcats is not an option cause of my connection. Also i don't wanna have duplicate entries for my podcasts in order to have the new episodes.
I really hope iTunes 5.1 comes out soon and fixes these bugs. In my opinion, this is the buggiest release of iTunes for Windows Apple ever made.ME TOO. Now I want to know how I can DOWNgrade iTunes.
Also, when I have left iTunes open for a while, I come back to it, and the window is all indecipherable garbage.
And don't waste your time. I have done it all, and nothing has helped. I either download podcast by painful podcast or I don't get anything at all.
G4 Mac OS X (10.4.9) -
Does anyone know what the partitions look like after installing boot camp on a 3T fusion drive
I installed a boot camp partition on a 3T fusion drive. Running disk utility afterward it looks like this.
Is this what it should look like? I understand about the need for bootcamp to create 2 physical drives in core storage in order to install boot camp on a 3T fusion drive but should I see both drives after it is done? -
Lightroom 1.4 catalog corrupted after installing/uninstalling 2.0
Hi all,
I have about 10,000 images in my catalog, including thousands of edits made in the last week. I installed version 2.0 yesterday, but because of numerous problems (very slow, slider problems, etc) I got rid of it and tried to revert to 1.4.1
Unfortunately, ever since doing so, somehow my database has become corrupted and I can't regularly export catalogs. Sometimes they work, most times they don't. Most of my edits are very substantial and I've spent days working on a few of them so I can't risk anything major. I never had the opportunity to backup the catalog either (backups were turned off by default on this install).
SO. Is there ANY possibility of un-corrupting this database or have I just lost months of work keywording ?Which is fine, but it's the version 1 catalog that has corrupted. I deleted the version 2 catalog after removing the software from my PC. I'm able to navigate within my catalog and make changes, etc, but exporting anything is hit or miss, and more hit than miss. If I choose to export x number of images as a catalog it will start the process, but within about 3 or 4 seconds will error out saying "Lightroom wsa unable to export the catalog. Unrecoverable error when generating export catalog." Nothing further to aid in troubleshooting.
This never happened before I installed the new version of the software. V2 seems to have modified it in some way upon import, or else co-incidentally something else happened to it at the same time. Either way, I can't export several groups of altered Nikon NEF images. I tried exporting the catalog without including the actual image files but no-go there either. The originals are safe (thank goodness), but the edits can't be moved, and some of them took hours of tweaking to accomplish. -
Mavericks is corrupted after installing windows
I installed windows 7 home premium a few days ago, like 2 i think, and then i downloaded a game aon the windows side and now i want to use mavericks again. I restart the mac and now mavericks keeps booting up with a loading bar and shutting down halfway. If i use disk utility, it says mac is corrupted. When i repair it, it cant repair it. I dont have a backup of mac because time machine never works, and i dont know how to use it. Any help? This is the second time its happened and i am not wiping the hard
A Mid 2010 Macbook pro
MacBook Pro 7,1
i dont know much abot mac os x, so 2. Was a no. Never heard of it either
i actually installed Final Fantasy XIII-2 and played it for half an hour before switching to mavericks, with mavericks working. Two things i think may have causd it would be either
1. Holding down power button while mavericks was booting up a few times because i missed the alt key when booting
2. Windows update?
The only thing i did after the restart was install, then reinstall a windows 7 theme. Install xbox 360 controller for windows, a directX patch (installed before and mavericks worked so not directX) and a few more windows updates.
sorry for any typos, a ipad mini isnt very fast. -
Windows 7 partition got corrupted after yosemite upgrade
Loner T please help. I can't believe Apple would do this to me. After Yosemite upgrade, windows 7 keeps booting into setup or recovery.
Salmans-MBP-2:~ salman$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *600.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS OS X 199.5 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data Windows 7 300.0 GB disk0s4
5: Microsoft Basic Data 99.8 GB disk0s5
Salmans-MBP-2:~ salman$ diskutil cs list
No CoreStorage logical volume groups found
Salmans-MBP-2:~ salman$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=600127266816; sectorsize=512; blocks=1172123568
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1172123567
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 389617848 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
390027488 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
391297024 585936896 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
977233920 194887680 5 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1172121600 1935
1172123535 32 Sec GPT table
1172123567 1 Sec GPT header
Salmans-MBP-2:~ salman$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 72961/255/63 [1172123568 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 389617848] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 390027488 - 1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 391297024 - 585936896] HPFS/QNX/AUX
Salmans-MBP-2:~ salman$
Salmans-MBP-2:~ salman$
Salmans-MBP-2:~ salman$
Salmans-MBP-2:~ salman$ çsudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
Password:
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 b8 52 17 |........?.....R.|
00000020 00 00 00 00 80 00 80 00 ff 5f 8a 2e 00 00 00 00 |........._......|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 e0 4f 34 ba 5b 34 ba c0 |.........O4.[4..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
sudo dd if=/dev/rdisk0s5 count=1 2>/dev/null | hexdump -C
00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000200
Thx. -
Windows 7 Corrupted after installing new keyboard
Installed a new keyboard on my Dell 1525 Inspiron computer. Good news the new keyboard works perfectly, bad news, Windows 7 will not launch. I have run the diagnostics and it all says it is fine. I have run the recovery mode and auto repair, and it comes
up and says a recent hardware installation should be removed and try again. So I removed the new keyboard and reinstalled the old keyboard, but did not fix it. Try going back to a previous backup and it did not fix it either. Now what? Should I reinstall Windows
7? I don't have a recovery disc or the original disc since I upgraded from XP to W7 by downloading it. I hate spending $90 dollars on new software as old as the computer is, but it still works really well, which is why I bought the keyboard. Help!!!!!Hi BeckyLaWR,
Is the keyboard a USB device ? Have you tried to choose the "Last known good configurations" option to have a check ? Does machine boot well without the new keyboard ?Can we boot into safe mode ?
There is a possibility that the driver installed for the keyboard is corrupted.It is recommended to download the driver from the manufacturer website for the new keyboard.
Best regards -
CS6 corrupt after installing quicktime
Exports in CS6 premiere, AE and mediaencoder fails horribly. When I open projects in premiere, ALL sound is panned to the left and exports from ME give me videos with audio 'left' only.
After 3 weeks of headaches I found the 'solution'. I did full re-installs of system and CS6, keeping track of what program could cause the problem.
It seems that when I install Quicktime the problem comes up. Now I didnt install it and everything works OK. Only thing is that I get notified that I need to install quicktime. I also NEED quicktime sometimes for projects.
Any suggestions?
my system:
i7, 24Gb RAM, win7 proLast night I had the same problem. Tried to upgrade and got the version with Itunes to see what it was. After reboot, Both physical drives and a vertual drive now have the yellow mark. This program should not have touched device drivers. Uninstalled both quicktime and Itunes and rebooted. Same thing. Reinstalled Quicktime. Same thing. Ran reg mechanic. it said 2 dlls where missing:
PxSFS.DLL
pxwma.dll
These don't seem to be device drivers, so should not have had an effect, but I replaced them which made reg mechanic happy. Problem is still there.
In Event viewer for application I now have this error at each reboot:
The description for Event ID ( 0 ) in Source ( IDriverT ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Service started.
For System Event I have this at each reboot because the cdroms are disabled:
The Cdralw2k service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
Looking through this thread it looks like just other users replying. Where is Apple? they created this mess.
Maybe you are looking for
-
"This is an Adobe Illustrator file that was save without PDf content."
I have a client that has been working on a file in AI CS, never left his machine, but when he went to open it today he gets a message that says this file "was generated by a newer version of Illustrator. Would you like to import this file? Some data
-
Can't get itunes to see apple tv under devices?
can't get itunes to see apple tv?? any help appreciated?
-
JSP in multiple places for webapplication
I was wondering would it possible to configure a web application so that I could have one set of JSPs in the normal J2EE place under the project context and to have another set of JSPs in an entirely different place. For example, the first location w
-
Photoshop elements 9 organizer stuck in Taskbar
I recently reinstalled Photoshop Elements 9 on my new Windows 7 sytem which replaced my old XP system which was hit by lightning and destroyed. It worked fine to start with, then on the second day after the system had gone into sleep mode( not the fi
-
Adobe Photoshop Elements 12 Lizenznummer
wird nicht registriert. Adobe reagiert nicht. Versuche es seit 2 Tagen. Wer gibt Rat?