Partitioned snapshot with parallel option unable to refresh for 14 hours

Platform: SLES 8, Oracle 9.2.0.4
Master site - partitioned table (7G)
Snapshot site - partitioned snapshot (2.3G)
Creation of snapshot takes about 2 hours
First fast refresh didn't finished even after 14 hours, so I killed the session.
QUESTION:
Any known issues in using partitioned snapshots, fast refresh and parallel option?
Thanks
Srdjan

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Similar Messages

Error when creating index with parallel option on very large table

I am getting a
"7:15:52 AM ORA-00600: internal error code, arguments: [kxfqupp_bad_cvl], [7940], [6], [0], [], [], [], []"
error when creating an index with parallel option. Which is strange because this has not been a problem until now. We just hit 60 million rows in a 45 column table, and I wonder if we've hit a bug.
Version 10.2.0.4
O/S Linux
As a test I removed the parallel option and several of the indexes were created with no problem, but many still threw the same error... Strange. Do I need a patch update of some kind?

This is most certainly a bug.
From metalink it looks like bug 4695511 - fixed in 10.2.0.4.1

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.

If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

TS3297 I i downlaoded flashcards + with the top in app purchase of "US english female" for 1.99 and it shows the purchase with the option to download it for free then it comes back "Failure ?! Receipt verification failed !

I downloaded flashcards + with the top in app purchase of " US english female" for 1.99 and it shows the purchase with the option to download it again for free then it comes back "Failure ?! Receipt verification failed ! I have deleted the app and reinstalled several times and it still does not work !!!!I have a iphone 4s with the 5.1.1. Thanks

Lots of people having this problem. Flash card+ says this is due to a change in the Apple processes receipts... See posts on their facebook page. https://www.facebook.com/flashcardsplus/timeline?filter=2

ECM Plan with no budget, planning, or approval for hourly union employees

We are implementing Enterprise Compensation Management at my company. We are on 6.0 Ehp5. One of our requirements is for a General Increase Plan (Salary Adjustment) for union employees. There is no approval process for this plan. Once top leadership has approved the increase (outside of SAP) every eligible employeeu2019s base pay is increased by the same percentage. Also, this group of employees has fixed pay per job. We use table T510 to store their pay scales and levels. So we normally increase the values in T510 by the approved percentage and then create new IT0008 via mass upload.
Since we are implementing ECM and want this plan to be administered through ECM, my question is about how that should work. I was thinking that we would use PECM_CREATE_COMP_PRO to create the Compensation Process record and bring to the minimum. I am not sure if this transaction looks at T510 or just T710 or the Planned Compensation (HRP1005). I assume we would then use PECM_CHANGE_STATUS to change the status to u201CApprovedu201D (not sure if the IT0759 has to be in Appoved status before being activated). Lastly we would use PECM_CHANGE_STATUS to Activate the Compensation Process infotypes. Does this sound like the way to handle a plan where every eligible employee gets the same % increase or do you know of a best practice you could share?

Hi Vishal,
Nice to see your reply, i am having SAP_ALL permissions in the backend system, my user id was attached to employee, that employee is top level manager, i am able to see employees successfully in MSS 600 Compensation Approval WebDynpro JAVA application for Approval and Rejection, but i am not able to see employeed in MSS 604 (EHP4) Review Planning(Compensation Approval) WebDynpro ABAP application.
When i am trying to execute that application even i am not able to see any errors, the screen looks fine, only in the table it displays " table does not contain data"
If you have any idea please help me on this one.
Thanks in Advance.
Regards,
Babu.

Issues with parallel processing in Logical Database PCH and PNP

Has anyone encountered issues when executing programs in parallel that utilizes the logical database PCH or PNP?
Our scenario is the following:
We having have 55 concurrent jobs that execute a program that use the logical database PCH at a given time. We load the the PCHINDEX table with the code below.
      wa_pchindex-plvar = '01'.
      wa_pchindex-otype = 'S'.
      wa_pchindex-objid_low = index_objid.
      APPEND wa_pchindex TO pchindex.
We have seen instances where when the program is executed in parallel, with each process having its own range of positions id's, that some positions are dropped or some are added that is outside the range of the given process.
For example:
process 1 has a range of positions ID's 1-10
process 2 has a range of positions ID's 11-20
process 3 has a range of positions ID's 21-30
Process 3 drops position 25 and adds position 46.
Has anyone faced a similar issue?
Thanks for your help.
Best Regards,
Duke

Hi,
first of all, you should read [Using Parallel Execution|http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/usingpe.htm#DWHSG024] in documentation for your version - almost all of these topics are covered there.
1. According to my server specification how much DOP i can specify.It depends not only on number of CPU. More important factors are settings of PARALLEL_MAX_SERVERS and PARALLEL_ADAPTIVE_MULTI_USER.
2. Which option for Setting Parallel is good - Using the 'alter table A parallel 4' or passing the parallel hints in the sql statementsIt depends on your application. When setting PARALLEL on a table, all SQL dealing with that table would be considered for parallel execution. So if it is normal for your app to use parallel access to that table, it's OK. If you want to use PX on a limited set of SQL, then hints or session settings are more appropriate.
3. We have a batch processing jobs which are loading data into the tables from flat files (24*7) using sql loader. is it possible to parallel this operation and any negative effect if enabled parallel.Yes, refer to documentation.
4. Query or DML - which one will be perform best with parallel option.Both may take advantages of using PX (with some restrictions to Parallel DML) and both may run slower than non-PX versions.
5. What are the negative issue if parallel option is enabled.1) Object checkpoint happens before starting parallel FTS (true for >=10gR2, before that version tablespace checkpoint was used)
2) More CPU and memory resources are used with PX - it may be both benefit and an issue, especially with concurrent PX.
6. what are the things to be taken care while enabling the parallel option.Read the documentation - it contains almost all you need to know. Since you are using RAC, you sould not forget about method of PX slaves load balancing between nodes. If you are on 10g, refer to INSTANSE_GROUPS/PARALLEL_INSTANCE_GROUPS parameters, if you are using 11g then properly configure services.

Ocfs2 mount with datavolume option fails on sles11

im using SLES 11 to build up Oracle 11g R2 RAC and using SuSE high avalability extension for ocfs2 packages. when trying to mount shared disks (ocfs2 formatted) with datavolume option (that is required for oracle ocr and voting disks) i'm facing the following error in kernel messages (dmesg):
OCFS2 1.5.0
(15281,0):ocfs2_parse_options:1213 ERROR: Unrecognized mount option "datavolume" or missing value
mounting with datavolume option is REQUIRED for ocr and voting disks , any ideas how to mount with this option?

Faced the same issue on the SLES 11 SP1 kernel "ocfs2_parse_options:1476 ERROR: Unrecognized mount option "datavolume" or missing value"..
The mount works just fine without the -o datavolume option...
mount -t ocfs2 /dev/sdxx /dir
When we add the needed -o datavolume option thats when we get the error...
mount -o datavolume,nointr -t ocfs2 /dev/sdxx /dir
Was this issue ever re-solved on the SLES 11 SP1... Any patches or info on where one would we need to move to get more info.
Cheers

Unable to Check for Update on OS 5.1

My iPad 2 will not update its software over the air and comes up with the message Unable to Check for Update. I have tried updating via iTunes 10.6 and it just sits there trying to contact the update server. I have also reset the iPad and restored from backup. Exactly the same problem!
Its nothing to do with the network as i get exactly the same problem at work as i do at home. My iPhone 4S updated to 5.1 without any problem. However my iPad just does not want to know.
Please help!

Correction. I started the update on my iPhone and my wife's iPad. However, they never finished. Each one returned an error message stating that the "Software Update Failed. An error occurred downloading iOS 5.1." I can't even get my ipad2 to get that far. It returns an error when trying to contact the server.

In my MacBook Pro, finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see top bar(Apple, Date, Wifi). Even in safari address bar not accepting

In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..

One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
Clinton

Not getting option to Backup Using Child Partition Snapshot DPM 2012 R2

I am running DPM 2012 R2 fully patched.
I am trying to use Backup Using Child Partition Snapshot of a Hyper-V Server 2012 R2 Datacenter Cluster using CSV.
I get no option to use Backup Using Child Partition Snapshot, just online backup.
I have gone through the steps in the Microsoft document "Configure CSV Backups"
http://technet.microsoft.com/en-us/library/hh758027.aspx (Some steps did not apply due to my not using Windows 2008 R2)
Has "Backup Using Child Partiton Snapshot" been replaced by "\Online\VMName" ?
What am I missing?

Hi,
Yes, Windows server 2012 R2 has changed the caption from "Backup Using Child Partiton Snapshot" to "\Online\VMName" - DPM is displaying the new caption when protecting Windows Server 2012 R2 guests.
MORE INFORMATION
To list Windows 2012 R2 hyper-V writer captions for guests to see if online or offline state backups will be done:
From an administrative command prompt on the Hyper-V server:
a. Type: copy con script.txt and press enter
b. Type: list writers and press enter
c. Press CTRL + Z + enter (to save)
d. Type: diskshadow /s script.txt | find /i "caption: O"
Output will be displayed for each guest as follows.
C:\temp>diskshadow /s script.txt | find /i "caption: O"
- Caption: Online\SQLSERVER
- Caption: Offline\WSS-V14
The Windows 2012 R2 Hyper-V writer adds the VM in the following format:
For offline backups: Offline\<VMName>
For online backups: Online\<VMName>
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Brand new Ipod touch bought yesterday - Screen is frozen with an itunes emblem and cable. Unable to refresh or restore ipod. Computer and itunes does not recognize ipod.

This is first Ipod for me - I have had less than one day. Screen is frozen with itunes emblem and cable. Unable to refresh/restore or do anything with ipod. I turn off/on and get the same frozen screen. My computer does not recognize ipod. Itunes does not recognize ipod so I cannot restore.... Should I take this ipod back and get a new one? Is this normal?

Before you can use the iPod you have to activate it by connecting it to a computer with iTunes. Try the following to get your computer to see the iPod so you can activate the iPod.
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

I need to use my iMac to run some Windows software and was thinking of using Parallels Desktop 9 to help with this. Do you still have to partition your drive with Parallels and does this leave you open to viruses?

I need to use my iMac to run some Windows software not available for Mac and was thinking of obtaining Parrallels Desktop 9 to help with this. If I use Parrallels do you still have to partitian your drive and does this leave you open to viruses?

You do not have to partition your drive - Parallels creates a disk image which contains your Windows installation. You do have to exercise anti-virus measures in the Windows partition, although such malware cannot affect the Mac filesystem.
Matt

Every ten minutes a popup on my 4s appears saying "unable to download" with the option of "done" or "retry". I can't get rid of it and I can't find out what it's trying to do!

Every ten minutes a popup on my 4s appears saying "unable to download" with the option of "done" or "retry". I can't get rid of it and I can't find out what it's trying to do! theres noting pending on the App Store or iTunes. Nothing failed. I've reset my settings. Logged out and back into itunes. It's really annoying as rinsing my data!

After talking to Apple for 3 hours I figured it out myself.
Tre here was a singular failed song on iTunes on the computer that was trying to download and messing everything up. Maybe if you use iTunes on the computer and have a little mooch you'll find the same thing. I think it was hidden in the purchased part of it

Creating a primary key with the parallel option and the tablespace option

I know I can create a unique index with these options and then make the primary key with the "using index" clause. anyway to do this and skip the create unique index and just create the primary key ?

SQL> ALTER TABLE t
2 ADD CONSTRAINT pk_t
3 PRIMARY KEY (testcol)
4 USING INDEX
5 TABLESPACE example
6 PARALLEL (DEGREE 2);
PARALLEL (DEGREE 2)
ERROR at line 6:
ORA-03001: unimplemented featureYou can name the tablespace but you must do an alter index thereafter.

I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad.

I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad and tried again with no success. Any help would be appreciated

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Partitioned snapshot with parallel option unable to refresh for 14 hours

Similar Messages

Maybe you are looking for