Partitioning an external hard drive for Mac and PC

I want to partition an external hard drive (3TB) into 3 even partitions. I want to use one for PC storage, one for Mac storage and the last for Mac backup. Is this possible and how do I do it?

Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Re-partition the drive to create the three partitions. The one you wish to use on a PC you should format MSDOS (FAT).
When you connect the drive to your PC it should have no problem reading the partition set up for a PC. Now while on the PC you may wish to consider reformatting that partition using ExFAT (if supported on your PC.) This format is more compatible with both OS X and NTSF supporting long file names and other FAT filesystem irregularities.

Similar Messages

I want to format a Seagate Expansion External Hard Drive for Mac and PC

I ordered a Seagate Expansion 2 TB USB 3.0 Desktop External Hard Drive to use with my new Mac and my old PC (or at least get my photos off of both and put them on the drive). I thought all HDs could be formatted to use by both, I was able to get a Mac HD to work with my PC in 2008 (but it died). I am reading that this drive is PC only. I have Parallels and Windows 8 on my Mac if worse comes to worse but I would like all of my computers, real, virtual old and new to be able to access the external drive. Has anyone encountered this issue before? What should I format it in? FAT32? If yes, how would I go about that on a Mac. Or should I just return it?
I'm kind of Mac clueless. I spent my childhood through college on a Mac but I graduated right when OSX came around and I don't know how to work with the Mac "under the hood" like I did with OS9 and with Windows. So please talk to me like I am an an adult idiot.
Thanks!!!!

The optimum choice is to format it ExFAT, but do so on the PC, not the Mac. Alternatively, you can make two partitions - one for the Mac; one for the PC. Partition the drive using GUID when you make the two partitions. Format one using Mac OS Extended, Journaled. Format the other on your PC using NTFS if you won't need to write to it from the OS X side or use ExFAT if you do.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) you will use for Windows from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to MSDOS.
6. Click on the Erase button.
When you connect the drive to your PC reformat the PC volume to either NTFS or ExFAT.

External hard drive for Mac and Windows?

Hey all,
Is it possible to set up an external hard drive with a partition that has one side compatible with Mac and the other with Windows, similar to a Boot Camp setup on an internal drive? If so, how do I do that? Thanks for any advice you can give.

Rekishika:
Yes it is possible. Use Disk Utility from Leopard and partition the external drive to the desired space for each. Format one side with Mac HFS+ Journaled and the other with FAT32 (You can reformat the FAT32). You can also format both external partitions to FAT32 if you want Leopard and Windows to access (read and write)either one of them.
Axel F.

Same External Hard Drive for Mac and PC?

Hello,
I just bought an iMac and a Lacie external hard drive. I plan to format the Lacie for the Mac. However I'd like to use it to tranfer my files from the PC. Will the Mac formatted Lacie External Drive work with both the iMac and the PC?
Thanks!
Jim

Another alternative is to get a Lacie drive and use it native to MAC. To acess read/ write capacity to your NTFS partitions refer to my post in:
http://discussions.apple.com/thread.jspa?threadID=1425010&tstart=0
regards,

External Hard Drive for Mac AND PC

I need to purchase an external Hard Drive to be able to back up both my iMac and my partner's PC. I am currently looking at buying either:
Iomega UltraMax Hard Drive 500GB FireWire 400/USB 2.0
OR
Iomega 500GB Minimax Hard Drive with Dual Interface + USB/FireWire Hub
Can anyone tell me is it possible to format either of these Drives to be able to accept both Mac and PC, and if so, do either of these drives let you have a permanent connection to both at the same time, so they can be set up and left to do their backups automatically without always swapping cables over etc.
Does anyone have a preference between these drives?
(Oh, and for info, I won't be using Time Capsule as I only have 10.3.9!)
Thanks

I think there is a decent amount of BS in there...
I have a USB HD that came out of the box formatted as FAT32- both my MacBook Pro and PC laptop can read & write to it just fine. I haven't had it long enough to comment on stability, but haven't had any issues yet. I don't have any special software on the PC, either- I think the info from the Seagate forums sounds like people remembering the "old days" of Windows 98 and pre-OS X systems, when you did need software like that for true cross-platform drive access.
As for the drive not working on a LAN- well, the hardware doesn't know the difference, so as long as it's connected via USB to the AEBS, it's fine. What could cause an issue would be your PC OS version. I have found WinXP to be really good (well, for a Win OS, anyway) at playing nice with others. Vista is a train wreck for many, many reasons, but may be OK for this too. Anything earlier than XP may be a bit more troublesome.
Hope my 2 cents helps...

Formatting external hard drive for MAC and Windows

I have an external hard drive that I would like to make compatible with BOTH Mac and Windows. I don't want to split it but is there any way that I can make it compatible to where I can use it back and forth between both? I have classes and use Photoshop on both systems and need to be able to read and write to the hard drive from each system. Please let me know if this is possible and how? Thanks

I have a 500GB external HDD which I had to format o Fat32 a while ago. I don't remember exactly how I did it, but I remember it was a pain in the *** and took forever (I was under Windows XP).
So short answer to your question is yes. It is possible and as the above person said, you need to format to Fat32. Long answer is it will take some time and effort. Here are a few links to help you get started:
http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
http://macosx.com/forums/mac-os-x-system-mac-software/270038-format-new-hard-dis k-into-fat32.html
http://en.kioskea.net/faq/sujet-676-formatting-your-drive-with-fat32
I haven't tried any of these (I believe I formatted mine downloading a third party app), but you might be lucky. Good luck.

Formatting LaCie External Hard Drive for MAC and PC

Hi,
I just recently purchased a LaCie 500 GB Hard Drive from the Apple Store in order to back up and store most of my PC (Window) files. Most of my files that I need to back up are on CD, DVD, and USB mini drives. I was thinking of transferring the files through my MacBook Pro but I'm not sure how to partition the hard drive, since most of my files are generated from PC's and I would need to connect the hard drive to a PC in the future anyway.
From what I understand, the files that I save in the Windows partition will only be recognized when on a PC, and the same for the MAC. But what about simple compatible files that are read cross platform, such as Word documents? Would I still only be able to access each file depending on the platform and the partition?
Is there a way that I can just partition it into a single storage space – as how servers store data, regardless of whether it’s a PC or MAC file? I’m also wondering what would happen if I were to plug it into my laptop first? If it doesn’t ask me to partition the drive on my PC, will it ask me when I plug it back into the MAC afterwards? And if I partition it then, what would happen to my data?
Any help would be greatly appreciated!
Thank you

Hi, njoay
I just moved to Mac from Windows last week onto a new MBP. I purchased a Lacie 500GB ruggedized drive. Here is what I know and tried:
1) If you format the Lacie in Mac format, then you can't use it on a Windows machine without software eg MacDrive.
2) If you format the Lacie in NTFS, you can only read from it when connected to Mac without other software.
I work a lot with VMWare, so I need the LACIE to be able to connect to both PC and MAC. I found a solution from another MAC user: "Paragon NTFS for Mac OS" (see http://www.paragon-software.com/home/ntfs-mac/) which you can purchase for US$39.
This is what I did:
1) connect my Lacie to my PC and formatted it in NTFS format.
2) Installed Paragon NTFS onto my MAC
3) Connected LACIE to Mac.
Here are the results:
1) Connection with USB2.0 from Lacie to Mac - it works (can read and write to LAcie formatted in NTFS)
2) Connection with Firewire 800 from Lacie to Mac - it does NOT work. The disk gets ejected. I have logged a support call with Paragon on this issue and am waiting a reply.
3) Connection with Firewire 400 from Lacie to Mac - have not tried it yet.
Hope the above helps.

Formatting external Hard Drive for Mac and PC Access

I have a USB External HD by Seagate that I want to add to my Airport Extreme BS that creates my LAN for a Mac PB, WinXP laptop and HP OfficeJet printer. The disk is currently formatted as NTFS and I don't think a Mac can read that. My HD manufacturer (Seagate) told me 1) FAT32 is unstable for PC and/or Mac usage and 2) my 300GB Pushbutton HD (3 years old) "will not work" on a LAN.
I think both issues are BS as they now have the Maxtor "network HDs" to sell. Any truth to this??
Second question: Seagate forums suggested that I format HD to FAT32 or Mac format and then buy "MacDrive" software so the PC can read/write to the drive. Same question: BS or truth.

I think there is a decent amount of BS in there...
I have a USB HD that came out of the box formatted as FAT32- both my MacBook Pro and PC laptop can read & write to it just fine. I haven't had it long enough to comment on stability, but haven't had any issues yet. I don't have any special software on the PC, either- I think the info from the Seagate forums sounds like people remembering the "old days" of Windows 98 and pre-OS X systems, when you did need software like that for true cross-platform drive access.
As for the drive not working on a LAN- well, the hardware doesn't know the difference, so as long as it's connected via USB to the AEBS, it's fine. What could cause an issue would be your PC OS version. I have found WinXP to be really good (well, for a Win OS, anyway) at playing nice with others. Vista is a train wreck for many, many reasons, but may be OK for this too. Anything earlier than XP may be a bit more troublesome.
Hope my 2 cents helps...

Formatting an external hard drive for Mac and Windows

Hello,
I just bought a brand new Seagate Expansion Desktop Drive (2TB) and am trying to work out how to format it. I want to move all my photos and movies to it from my laptop so i have more space. I have a Mac OS X 10.5.8 laptop but i also wanted to make sure it was compatible with other Windows computers in case i need to use it on someone else's PC.
I've read through a few posts over the net and i am getting confused as i'm not IT-intelligent at all. I've seen there are possibly 4 different format types.
Any help would be much appreciated.
Thank you!

Answered here: Formatting brand new external hard drive

How can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

Hello everyone, how can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

OK. Start with:
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Click on the Erase tab in DU's main window. Select one of the two partitions, preferably the first one, change the Format type: to MSDOS then click on the Erase button.

"How to partition for an external hard drive for windows and Mac backups"

I have two PCs, Dells, and 1 Macbook Pro. They are set up on a wireless network. I would like to set up an external hard drive to backup all three automatically. Does anyone know how I can do this? Do I have to partition the external hard drive?

You would need to partition the hard drive using the GUID partition scheme. Your non-Apple machines would need their partitions formatted MS-DOS (FAT) and the Mac partition would have to be formatted Mac OS Extended. Note, however, that using the MS-DOS format may cause some problems with filenames on an NTFS formatted Windows drive.
Now you could use Mac OS Extended formats on all three partitions, but then you would need third-party software on your Windows machines to enable them to read and write a Mac-formatted drive.

Should I partition my external hard drive for FCPX media management?

Is there any benefit to creating partitions on a single external hard drive for media management purposes?
My thoughts were to divide a 1tb external firewire drive into 3x 300gb slices and leave 100gb as "free space".
Each partition would be dedicated to at least 1 active event + project (using FCPX terms) that I am editing.
My thinking on this is that when dealing with the source media + event database, OSX/FCPX will only work on the partition that has been improving read/write speed.
I could easily be wrong about this.

In my view there is no point in partition the drive. You are wasting space and speed. Events are segregated in the FCP folder structure. There is no need to to it with partitions.

The best external hard drives for macs

Can anyone recommend a good external hard drive for a mac computer; preferably the IMac OS 10.5.6 desktop. Thanks!

Personal Experience with the One Touch Series:
Keep a VERY CLOSE EYE on that Maxtor One Touch!
I had two of the 1TB Firewire 800 models at one point. Hard drives failed on one of them within a month. Warranty replaced the unit but not the data. After a year, the tiny fans died and the drives overheated, resulting in total loss of both enclosures and all the data on them (within a week of each other).
Those things are not meant for continuous use. If you only use them for periodic backup purposes, and then shut them off, they may be fine.
Maxtor's setup software for the Mac was a PITA, too. The version included on the disc was worthless. Disk label indicated one version, actual version on the disc was an older, incompatible version. Maxtor sent a replacement disc. It was the same disc with the same problem. Finally located the correct installer on their website. That was a few years ago.
I'll never touch the touch series again as a result.
On the other hand, I've had a SmartDisk FireLite 60 GB (FireWire model) for my Powerbook for 5 years now with excellent performance. I have no problem recommending SmartDisk drives.
-mt

I found information on how to transfer my library to a new computer. I am going to use an external hard drive for this and transfer my itunes folder to the new computer. I will then download and install a new version of itunes on my new computer. My q

I found information on how to transfer my itunes library to a new computer. I am going to use an external hard drive for this to transfer my itunes folder to the new computer.
I will then download and install a new version of itunes on my new computer.
My question is this. When I do this, will itunes have all my album artwork for all my library? My library has a lot of my own music and I have spent quite a bit of time copying album artwork that itunes did not add. I am really hoping I don't have to do this again!
Thanks for your help!

If you follow the directions in this Link...
Copy iTunes to an External Drive
http://support.apple.com/kb/HT1751
Everything should be carried across...

My external hard drive for backup and Time Machine is full. I bought a new HD. Can I just begin using it, or must I transfer old BkUp and TM to the new HD?

My external hard drive for Back Up and Time Machine is full. I bought a new HD. Can I just begin using it and rely on the old HD for past Time Machine versions, or must I transfer the old Back Up and Time Machine files to the new HD?

It is your choice.
If you don't want to be able to far back into the time slots covered by the old disk then just start using the new disk.
If you want to retain the ability to go back into those time slots then copy it.
Allan

Partitioning an external hard drive for Mac and PC

Similar Messages

Maybe you are looking for