Partitioning: can it change dynamically?

Hey Partitioning Experts!
I am looking if this feature is possible?
I have got a cube (new-Not yet Loaded) in which I want to define Partitioning (Can be Physical/Logical). The partitioning should be in such a way that one partition will have data for last 24 months (say) and the other will hold all data prior to that. When new month data flows in the Partitioning should also dynamically shift. I was wondering if it is possible to achive and how?
Appreciate your suggestions!
Thanks
Meyps

Hi Ramesh!
Thanks for your inputs.
I did consider that option. But the practical difficullty in that is.
SAP recommends to take a complete back up before doing this that can be used to restore. Considering the current client's environment and size, I don't think I will be able to use this option.
Any other updates other than re-partitioning is appreciated.
Thanks
Meyps.

Similar Messages

  • Which part of SGA can be changed dynamically

    Which part of SGA can be changed dynamically in Oracle 9i & 10g

    10g R2: [Managing the System Global Area|http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#sthref376]
    9i R2: [Setting Initialization Parameters that Affect the Size of the SGA|http://download.oracle.com/docs/cd/B10501_01/server.920/a96521/create.htm#998095]
    As always the documentation is available at http://tahiti.oracle.com

  • How can data change dynamically between jtable

    hi,
    in my database i have 3 tables:
    university, etablissement, department.
    in one frame i want to create 3 jnavigationbars and 3 jtables each one represents a table.
    i want when i navigate in the jtable of university data in etablisement and department will be dynamically changed.
    can anyone help me.
    thanks

    Hi,
    make sure that the university, etablissement and department tables are related in the database when creating the ADF BC model. Then create a hierarchy of university, etablissement and department. Create the first table from university VO, the second from etablissement VO which is below university in teh VO hierarchy and eventually create a table on departmentVO below the etablissementVo
    Synchronization is handled automtically
    Frank

  • Can Keyfigures change dynamically in Report

    Hi
      I have  a requirement where in I need to change the Keyfigures shown in report dynamically.
    Example: I have ODS1 which has KF1 with sales org and plant information and ODS2 which has KF2 with sales org information. If user drills down the report based on sales org and plant, KF1 has to be displayed and in the same report, if user wants to see the results only at sales org level (taking plant off the drill down), then KF2 should be shown.
    Is this possible. If so, how?
    Please explain.
    Thanks,
    Sridevi.
    Edited by: Sridevi Kichhannagari on Mar 2, 2009 12:17 AM

    I have no idea on your solution according to my knowledge so far.
    But we may have another solution to meet the requirement.
    1. Create 2 reports accordingly.
    2. Create RRI, carefully pick a good name to avoid confusing
    3. Let user to pick a right report in his situation.

  • GOS - Generic Object Services - Change dynamically the title of attachments

    Dear Experts,
    how can I change dynamically the title of the single attachment in the attachment-list of cl_gos_manager?
    I hope you can help me.
    Thanks in advance.

    Thanks for reply.
    I solved the problem by the following way:
    - Function ARCHIV_GET_CONNECTIONS for getting all linked documents
    - Showing list in popup with ALV-Grid
    - SET HANDLER handle_double_click
    - Function ALINK_DOCUMETS_DISPLAY_MIX for viewing selected document on popup
    Marco

  • JCO change dynamic in WD

    Hi to all
    We are have a WDApplication there are musst connect two different SAP R/3 systems
                 WD Application
    JCO1 -
    JCO 2-----
    SAP1                               SAP2
    How can i change dynamicly the JCO in the WDApplication?
    Where include the JavaCode?
    Best Regards
    Thomas

    Thomas,
    There are certain restrictions for possible combinations of meta- and data-connections in WebDynpro Adaptive RFC model.
    Please read this post by Bertram Ganz: Re: JCO connection to multiple R/3 Back end system
    Hope you got an idea how to implement your task with SAP Enterprise Connector instead of Adaptive RFC.
    Valery Silaev
    SaM Solutions
    http://www.sam-solutions.net

  • How can i change column header value dynamically in IR report

    HI,
    I have created report with the help of collections. Report query has been changing dynamically but i got problem with report header names and headers names has not been changing dynamically it is always showing like c001,c002....etc so, i have created global item(G_ITEM) in shared components--->Applications items after that
    I have created process(before headers) and assigning some value to G_ITEM and used &G_ITEM to column headres in IR Report but here &G_ITEM is not showing any value.
    How can i achieve dynamic headers names by using *&G_ITEM(global items)* Please guide me to achieve this.
    Thanks in advance.
    Regards
    Narender B

    Narender wrote:
    HI,
    I have created report with the help of collections. Report query has been changing dynamically but i got problem with report header names and headers names has not been changing dynamically it is always showing like c001,c002....etc so, i have created global item(G_ITEM) in shared components--->Applications items after thatWhy didn't you answer the questions in the other thread to see if there was a better approach than this?
    I have created process(before headers) and assigning some value to G_ITEM and used &G_ITEM to column headres in IR Report but here &G_ITEM is not showing any value.
    How can i achieve dynamic headers names by using *&G_ITEM(global items)* Please guide me to achieve this.The static text exact substitution method of referencing the value of an APEX item requires a terminating dot ("."):
    &G_ITEM.

  • HT1766 I have made the C drive on my computer very small, with the intention that all data would be stored on the D partition. Can I change the destination for my iPad backup to the D drive?

    I have made the C drive on my computer very small and try to put all the data on the D partition. Can I change the destination for my iPad backup to the D drive?

    See if this post from turingtest2 helps : https://discussions.apple.com/message/24351688
    If not then you might be better off asking in the iTunes For Windows forum, you may be more likely to get better help there.

  • Using iPhoto 09, 8.1.2 How do I re-route saving pictures to the hard drive? Currently am saving to files on 'my' partition, and would like to change to save to a shared file so both partitions can view and access.

    Using iPhoto 09, 8.1.2 How do I re-route saving pictures to the hard drive? Currently am saving to files on 'my' partition, and would like to change to save to a shared file so both partitions can view and access.

    Drag the Library from the Pictures folder to the Users/Shared folder. I would point out that folks doing this on 10.6 and later frequently meet permissions issues. You might do better moving it to an appropriately formatted External Disk.

  • Can I change the sizes of my bootcamp/Mac partitions?

    Is it possible to move more of the space on my Windows partition back to my Mac partition without reinstalling everything? I'm spending next to no time in Windows at all, and I want more space on my Mac partition because it's where I store all my media.
    Basically, I want to redefine the partition sizes.

    Yes it is.
    The best app is iPartition, but you have to pay for it.
    Otherwise, how good are you with the command line?
    I think disk utility has an option as well.
    Actually, there are rules on where you can move / change the data. It has to come directly after the partition you want to resize.. IIRC

  • How can I make a label for my chart that changes dynamically when I drag selection of data to adjacent column?

    I have a custom budget using Numbers '08 and have labeled a chart in previous versions of my budget but when I tried to update it for the new year I can't figure out how to make the label change dynamically as I drag the selected area to the adjacent column. I have checked Numbers Help and Tutorial videos as wellas the manual and have not found anything that comes close to helping but as I said I had it on previous versions but obviously don't remember how I did it and unfortuanately it is not a very intuitive feature. Thanks in advance for any help on this.

    The linkage appears to be automatic, but when broken, does not reattach itself.
    Redoing the chart isn'r a long process, though, unless you've made extensive format changes to it. Here's my process, which started with a headerless table wiht the Month labels in Row 1 (and a Chart that had an "Untitled" label on the category axis, and ended with the table and chart shown below:
    Click on any cell in the table to activate it.
    Go Table > Add Header Row.
    Select the cells containing the month names. Copy.
    Select the cells in the same columns of the Header row. Paste.
    Select the table. If the Header for the current month is highlighted and the month label is on the table, Stop here.  If not (and it probably will not be), continue.
    Delete the existing Chart (or drag it aside to use as a colour and style reference)
    Unhide any hidden rows used in the Chart.
    Select the cells to be charted.
    Click the Series orientation control (¡¡¡) to change it. The control will turn 90° and move from the column highlight to the row highlight.
    Your table and chart should now resemble the one in the image above. Edit the style as needed and you're done.
    Regards,
    Barry

  • Can we change NAME OF TAB and ITEM NAME  dynamically at runtime in forms 6i

    Hi all,
    I have a requirement like
    1) based on organization choosen the TAB NAME AND TAB LABLE name in tab canvas should be changed dynamically. can this happen?
    example: In forms i gave the NAME and LABLE OF TAB (PROPERTY PALLET) as *'TAB_INITIAL'* and *'TAB_INITIAL'* respectively .
    when org_1 is choosen , lable should be changed to 'TAB_ORG_1' .
    when org_2 is choosen , lable should be changed to 'TAB_ORG_2'. can the NAME also be changed dynamically??
    2)Similarly can we change the ITEM NAMES present on this tab based on organization selection?
    Thanks,
    Durga Srinivas

    Hello.
    You can perform this by using:
    set_tab_page_property('Tab_page_name', label,'your_desire_label');
    and for item set_item_property.
    More details on these built-ins and also some example can be found in Forms Builder Help.
    Regards,
    Alex
    If someone's answer is helpful or correct please mark it accordingly.

  • Can I change partition size of external HD without losing Data

    I have an external HD that I use one partition for backup and use another partition for Time Machine. I need to change the sizes, need more on my backup. Can I change partition size of external HD without losing Data? I just changed from a Powermac G4 using Leopard to a Macbook Pro with Lion, so I am also thinkin in getting everything set up, format the Time Machine with the old stuff and make a new Time Machine.

    The Disk Utility can't change the starting point of a partition without erasing it and the data on it.
    (72024)

  • Can i change the column width in a table row dynamically

    Hi,
    There are two columns in one of the row of the table, can i change the width of the cells dynamically.
    Sometimes one of them will be blank and the other cell has to print the entire string .
    Left cell is left aligned and the right cell is right aligned.
    I tried to change the width using field.W but it didnot work.
    Regards,
    Sobhan

    Hi,
    We can change the column width of a column dynamically. Try the javascript code in the appropriate event.
    Table.columnWidths = "2in 3in 4in 5in";
    Thanks & Regards,
    Sanoosh

  • I am using the dynamic signal analyzer.vi but this vi has the output as single precision. How can I change this to DBL precision?

    I am using the dynamic signal analyzer.vi but this vi has the output as single precision. How can I change this to DBL precision? If I change the representation from single to double in the AI buffer read.vi labview returns ilegal operation and crash. I have labview 5.1 on windows 95 and one AT-MIO16XE50 DAQ board.
    Thanks in advance
    Ricardo.

    Probably by changing the data type that lvdaq.dll expects to write to is causing the crash. I can't test this since I have only 6.1 installed now. In any case, since the daq card is only 16 bits, the single precision is probably adequate for AI Buffer Read. If you do need the greater precision later on, you should be able to change representation in any one of the upper level VIs.

Maybe you are looking for