Partitioning Drive for Mac and PC to deliver 10GB video file

I need to deliver several video files to a client on a drive.
Because some of the clips are over 10GB I cannot use the drive in its current FAT state.
I want / need the drive to be read by both Mac AND PC.
If this is the case, and I cannot use FAT, should I partition the drive into TWO partitions?
If so, should I then make one partition for Mac and the other for PC... then upload the video files twice, once to each partition?
Is there an alternative? How do I make the drive partitioned for both allowing the video to be ready by both Mac and PC.
Can I do what needs to be done using Disk Utility?
What 2 formats should I use? Is MS-DOS (FAT) the windows based partition, and is that the only one? And won't that not work for my issue of needing to load a file over 4 gigs?
What partition scheme do I want? It appears I can only use one partition scheme... or is this incorrect?
I'm using Mac OS X 10.5.5
Computer is Mac G5. Drive is the WD 250GB passport.
Thanks

If you format the drive as Microsft NTFS, there will be no problem with split files.
[NTFS-3G 2009.4.4 Driver|http://macntfs-3g.blogspot.com>
[Instructions|http://hem.bredband.net/catacombae/ntfs-3g/macntfs-3g_userguide.pd f] Be sure to read them!
The PC needs to be running Win NT, 2000, XP, Vista etc to read the NTFS format.

Similar Messages

  • Best way to format my 16GB flash drive for Mac and PC transferring large power point files?

    best way to format my 16GB flash drive for Mac and PC transferring large power point files?

    format flash drive in Exfat for transferring files between Mac and Pc.
    FORMAT TYPES
    FAT32 (File Allocation Table)
    Read/Write FAT32 from both native Windows and native Mac OS X.
    Maximum file size: 4GB.
    Maximum volume size: 2TB
    You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
    NTFS (Windows NT File System)
    Read/Write NTFS from native Windows.
    Read only NTFS from native Mac OS X
    To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
    For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
    Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
    AirPort Extreme (802.11n) and Time Capsule do not support NTFS
    Maximum file size: 16 TB
    Maximum volume size: 256TB
    You can use this format if you routinely share a drive with multiple Windows systems.
    HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
    Read/Write HFS+ from native Mac OS X
    Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
    To Read HFS+ (but not Write) from Windows, Install HFSExplorer
    Maximum file size: 8EiB
    Maximum volume size: 8EiB
    You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
    EXFAT (FAT64)
    Supported in Mac OS X only in 10.6.5 or later.
    Not all Windows versions support exFAT. 
    exFAT (Extended File Allocation Table)
    AirPort Extreme (802.11n) and Time Capsule do not support exFAT
    Maximum file size: 16 EiB
    Maximum volume size: 64 ZiB
    You can use this format if it is supported by all computers with which you intend to share the drive.  See "disadvantages" for details.

  • How to format an external drive for mac AND pc use

    i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
    can i partion one part for ms-dos and part for macos extended?
    cheers
    -j-

    MS-DOS format (or FAT32) will be fine for both Mac and PC. However there is a 4GB file size limit with FAT32.
    You could use a dual partition, however the HFS+ partition would not be readable by the PC unless you installed the third party MacDrive.
    Look at this page for more information on a dual partition drive for Mac and Windows.
    http://macosxhints.com/article.php?story=20030613121738812
    iFelix

  • How to partition my drive for  Mac and XP use?  from a novice

    I would like to use my MacBook Pro for both Mac ad PC programs (Office and others) and hear that I can partition the drive.  How is the best way to do that?  Also I have an external Seagate FreeAgent GoFlex external drive to set up that supposedly can back up both Mac and PC without formatting each time.  Do I have to partition the drive first?  Do I use Time Machine?

    Is it your intent to run Windows programs on your computer?  If so then this is more than simply a partitioning exercise.
    In order to use an external drive on both Macs and PCs there are two options.  Option One is to partition and format the drive MBP and FAT32, respectively.  OS X can read/write a FAT32 formatted drive.  However, due to filesystem differences some features of the OS X filesystem are not supported by FAT32, so FAT32 is not the best choice for transferring OS X documents, but would be fine for transferring Windows documents.
    Option Two is to partition the drive using GUID then creating two partitions.  One partition is formatted Mac OS Extended, Journaled and the other partition is formatted FAT32.  Each partition can be used for the data from the appropriate platform.
    TM is not a file transfer program, cannot be used for Windows documents, and does not work on Windows.
    If you wish to run Windows on your Mac then see the following:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
    See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows. You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Partitioning an external hard drive for Mac and PC

    I want to partition an external hard drive (3TB) into 3 even partitions. I want to use one for PC storage, one for Mac storage and the last for Mac backup. Is this possible and how do I do it?

    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. Re-partition the drive to create the three partitions. The one you wish to use on a PC you should format MSDOS (FAT).
    When you connect the drive to your PC it should have no problem reading the partition set up for a PC. Now while on the PC you may wish to consider reformatting that partition using ExFAT (if supported on your PC.) This format is more compatible with both OS X and NTSF supporting long file names and other FAT filesystem irregularities.

  • I want to format a Seagate Expansion External Hard Drive for Mac and PC

    I ordered a Seagate Expansion 2 TB USB 3.0 Desktop External Hard Drive to use with my new Mac and my old PC (or at least get my photos off of both and put them on the drive).  I thought all HDs could be formatted to use by both, I was able to get a Mac HD to work with my PC in 2008 (but it died). I am reading that this drive is PC only.  I have Parallels and Windows 8 on my Mac if worse comes to worse but I would like all of my computers, real, virtual old and new to be able to access the external drive.  Has anyone encountered this issue before?  What should I format it in? FAT32? If yes, how would I go about that on a Mac.  Or should I just return it? 
    I'm kind of Mac clueless.  I spent my childhood through college on a Mac but I graduated right when OSX came around and I don't know how to work with the Mac "under the hood" like I did with OS9 and with Windows.  So please talk to me like I am an an adult idiot.
    Thanks!!!! 

    The optimum choice is to format it ExFAT, but do so on the PC, not the Mac. Alternatively, you can make two partitions - one for the Mac; one for the PC. Partition the drive using GUID when you make the two partitions. Format one using Mac OS Extended, Journaled. Format the other on your PC using NTFS if you won't need to write to it from the OS X side or use ExFAT if you do.
    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) you will use for Windows from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to MSDOS.
    6. Click on the Erase button.
    When you connect the drive to your PC reformat the PC volume to either NTFS or ExFAT.

  • External hard drive for Mac and Windows?

    Hey all,
    Is it possible to set up an external hard drive with a partition that has one side compatible with Mac and the other with Windows, similar to a Boot Camp setup on an internal drive? If so, how do I do that? Thanks for any advice you can give.

    Rekishika:
    Yes it is possible. Use Disk Utility from Leopard and partition the external drive to the desired space for each. Format one side with Mac HFS+ Journaled and the other with FAT32 (You can reformat the FAT32). You can also format both external partitions to FAT32 if you want Leopard and Windows to access (read and write)either one of them.
    Axel F.

  • New external drive for mac and windows

    Hello,
    I am looking to buy a 500gb maxtor external drive. Partition it 250gb for winxp and 250gb for my imac. I am really looking to make these drives as backup drives. I currently have an old 250gb (not all used) formatted as os x entended. I use it for all my itunes, photos, movies... photoshop, you get the picture... I just want to drag and drop to that drive. The same for my windows.
    Does this sound correct? Has anyone done it this way?
    Another way, would be to have it formatted for windows and drop and drag into two different folders : win and imac. But then I will be losing the naming conventions from the os x? isn't that why and want to use os x extended?
    Thanks for all ideas,
    Charlie

    Piece of cake!
    For those who want to know:
    usb connection to imac first. I started disk utility. Split the partition to two parts and formated only one partition as OS X extended. After done, copied my directories as a bkup.
    usb connection to windows. I started computer management and saw that the usb disk had two partitions: the first was healthy but unknown. That was ok, I wanted the second partition to be NTFS and formated. Then copied my directories to that drive as well.
    Connected back the imac and saw both partitions, imacbkup and winbkup. I forgot, just like what I do with the imac and winxp, I can see the c: drive via the mac.
    Very cool and easy. Maxtor drives are very reliable and easy to use.
    Thanks,
    Charlie Cooperman
    If anyone wants more detail info, you can email me at [email protected]

  • Formatting LaCie External Hard Drive for MAC and PC

    Hi,
    I just recently purchased a LaCie 500 GB Hard Drive from the Apple Store in order to back up and store most of my PC (Window) files. Most of my files that I need to back up are on CD, DVD, and USB mini drives. I was thinking of transferring the files through my MacBook Pro but I'm not sure how to partition the hard drive, since most of my files are generated from PC's and I would need to connect the hard drive to a PC in the future anyway.
    From what I understand, the files that I save in the Windows partition will only be recognized when on a PC, and the same for the MAC. But what about simple compatible files that are read cross platform, such as Word documents? Would I still only be able to access each file depending on the platform and the partition?
    Is there a way that I can just partition it into a single storage space – as how servers store data, regardless of whether it’s a PC or MAC file? I’m also wondering what would happen if I were to plug it into my laptop first? If it doesn’t ask me to partition the drive on my PC, will it ask me when I plug it back into the MAC afterwards? And if I partition it then, what would happen to my data?
    Any help would be greatly appreciated!
    Thank you

    Hi, njoay
    I just moved to Mac from Windows last week onto a new MBP. I purchased a Lacie 500GB ruggedized drive. Here is what I know and tried:
    1) If you format the Lacie in Mac format, then you can't use it on a Windows machine without software eg MacDrive.
    2) If you format the Lacie in NTFS, you can only read from it when connected to Mac without other software.
    I work a lot with VMWare, so I need the LACIE to be able to connect to both PC and MAC. I found a solution from another MAC user: "Paragon NTFS for Mac OS" (see http://www.paragon-software.com/home/ntfs-mac/) which you can purchase for US$39.
    This is what I did:
    1) connect my Lacie to my PC and formatted it in NTFS format.
    2) Installed Paragon NTFS onto my MAC
    3) Connected LACIE to Mac.
    Here are the results:
    1) Connection with USB2.0 from Lacie to Mac - it works (can read and write to LAcie formatted in NTFS)
    2) Connection with Firewire 800 from Lacie to Mac - it does NOT work. The disk gets ejected. I have logged a support call with Paragon on this issue and am waiting a reply.
    3) Connection with Firewire 400 from Lacie to Mac - have not tried it yet.
    Hope the above helps.

  • External drive for MAC and PC?

    My client wants to be able to view all the .mov files I've shot for them and due to file sizes, I need to deliver them all on a hard drive.
    Is there any easy fix on my end or their end to facilitate this?
    Thanks!

    I was assuming that with Quicktime they'd be able to view full size .mov files
    QuickTime .mov is a container, the video inside could have been made with any one of a number of codecs. If they do not have that particular codec, they won't be able to play the video. Not even all Macs have the same codecs, many are installed by FCP and unavailable elsewhere.
    Also - do you know someone that has had success with MacDrive 8 on a PC?
    It goes exactly what it says on the tin. Another alternative is for you to install the MacFuse/NTFS 3G package, which will enable your Mac to write files to a Windows NTFS formatted drive.

  • Tricky stuff: formating hard drive for Mac and Windows

    Don't know how to format an external USB hard drive for these purposes:
    #1. Store a bootable backup for my MacBook (Intel)
    #2. Must be readable and writeable by both Mac OS 10.4 and WinXP (mainly for file storage)
    Can I do 2 partitions, with Mac OS Extended (journal) + GUID to serve purpose #1, and MS-DOS + Master Boot Record to serve purpose #2? My research suggests no, it seems both volumes must use either GUID or MBR? Thanks

    Hi,
    I have two Western Digital external HDs with nearly exactly these specs.
    Partitioned them with GUID partition scheme and have Partition 1 as bootable OSX clone and partition 2 with FAT32 for file storage/sharing between OSX and Windows.
    So, what you want is what I have/use right now.
    Regards
    Stefan

  • How to format external drive for mac AND pc use

    hi
    i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
    can i partion one part for ms-dos and part for macos extended?
    cheers
    -j-

    There are a couple of disadvantages with formatting a
    disk as FAT32. Firstly, there is a limit on the file
    size for FAT32. I think it like 2 GB so if you
    capturing video the results will probably not fit
    into this file limit. Secondly FAT32 will not be
    bootable. I alway clone my system to a backup disk as
    bootable. That way if anything goes wrong with my
    system, I can just boot from my backup disk and fix
    it.
    The problem with doing this though is that the drive will not be usable with Windows (which was in the original posting) unless you use the third party MacDrive software on the PC.
    iFelix

  • Hard drive for mac and pc

    so mac doesn't have write capabilities on ntfs? and pc can't read something more than 2gb on fat32? how do i get a 15gb file from my mac onto my pc? should i just buy a big enough thumb drive? i've got a usb 150gb hard drive, so i'd like to use that instead. does macdrive solve this issue?

    Hi Jeremy,
    A few options...
    You could format that HDD as Fat32/MS-DOS, but you'd be limited to 4 GB Filesizes.
    NTFS-3G Stable Read/Write Driver...
    http://www.ntfs-3g.org/
    MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
    http://www.osnews.com/story/16930
    MacDrive for the PCs... allows them to Read/Write HFS+...
    http://www.mediafour.com/products/macdrive/
    should i just buy a big enough thumb drive?
    Wouldn't change anything.

  • Formatting external Hard Drive for Mac and PC Access

    I have a USB External HD by Seagate that I want to add to my Airport Extreme BS that creates my LAN for a Mac PB, WinXP laptop and HP OfficeJet printer. The disk is currently formatted as NTFS and I don't think a Mac can read that. My HD manufacturer (Seagate) told me 1) FAT32 is unstable for PC and/or Mac usage and 2) my 300GB Pushbutton HD (3 years old) "will not work" on a LAN.
    I think both issues are BS as they now have the Maxtor "network HDs" to sell. Any truth to this??
    Second question: Seagate forums suggested that I format HD to FAT32 or Mac format and then buy "MacDrive" software so the PC can read/write to the drive. Same question: BS or truth.

    I think there is a decent amount of BS in there...
    I have a USB HD that came out of the box formatted as FAT32- both my MacBook Pro and PC laptop can read & write to it just fine. I haven't had it long enough to comment on stability, but haven't had any issues yet. I don't have any special software on the PC, either- I think the info from the Seagate forums sounds like people remembering the "old days" of Windows 98 and pre-OS X systems, when you did need software like that for true cross-platform drive access.
    As for the drive not working on a LAN- well, the hardware doesn't know the difference, so as long as it's connected via USB to the AEBS, it's fine. What could cause an issue would be your PC OS version. I have found WinXP to be really good (well, for a Win OS, anyway) at playing nice with others. Vista is a train wreck for many, many reasons, but may be OK for this too. Anything earlier than XP may be a bit more troublesome.
    Hope my 2 cents helps...

  • External Hard Drive for Mac AND PC

    I need to purchase an external Hard Drive to be able to back up both my iMac and my partner's PC. I am currently looking at buying either:
    Iomega UltraMax Hard Drive 500GB FireWire 400/USB 2.0
    OR
    Iomega 500GB Minimax Hard Drive with Dual Interface + USB/FireWire Hub
    Can anyone tell me is it possible to format either of these Drives to be able to accept both Mac and PC, and if so, do either of these drives let you have a permanent connection to both at the same time, so they can be set up and left to do their backups automatically without always swapping cables over etc.
    Does anyone have a preference between these drives?
    (Oh, and for info, I won't be using Time Capsule as I only have 10.3.9!)
    Thanks

    I think there is a decent amount of BS in there...
    I have a USB HD that came out of the box formatted as FAT32- both my MacBook Pro and PC laptop can read & write to it just fine. I haven't had it long enough to comment on stability, but haven't had any issues yet. I don't have any special software on the PC, either- I think the info from the Seagate forums sounds like people remembering the "old days" of Windows 98 and pre-OS X systems, when you did need software like that for true cross-platform drive access.
    As for the drive not working on a LAN- well, the hardware doesn't know the difference, so as long as it's connected via USB to the AEBS, it's fine. What could cause an issue would be your PC OS version. I have found WinXP to be really good (well, for a Win OS, anyway) at playing nice with others. Vista is a train wreck for many, many reasons, but may be OK for this too. Anything earlier than XP may be a bit more troublesome.
    Hope my 2 cents helps...

Maybe you are looking for