Partitioning hard drive and moving pics

I have a single hard drive and the OS (win7) and all my data & pics are on a single partition.
I want want to create a new partition and move my data and pics onto it, leaving the OS on the original partition.
Will Lightroom "know" that I've moved the folders and will the LR catalogue be intact?
Many thanks.

No, Lightroom is not aware of any moves of your photos. What you need to do is move the photos using your operating system and then you would reconnect in Lightroom using these instructions: Adobe Lightroom - Find moved or missing files and folders
Unless you have some non-Lightroom reason for partitioning your hard drive, I guess I would advise you to not even bother. Of course, you may have non-Lightroom reasons for partitioning...

Similar Messages

Can i partition hard drive and run 10.6 on one and 10.4 on other

I have software that only runs under 10.4 on my older Imac. I would like to partition hard drive and run 10.6 on one and 10.4 on the other. Is this possible? Can I get instructions?

Yes.
Just set up the partitions. If you already have a 10.4.x and 10.6.x drives then "clone" them up as bootable backups with a backup utility like Carbon Copy Cloner or Super Duper.
When booting you can hold down the option key to get a list of bootable volumes (select with arrow keys and hit return). You can use Startup Disk for either of them to define the default system to boot from if you don't use the option key technique.
If you don't already have these systems then of course you will have to install them in their respective partitions.
You have to realize of course that these are two distinct systems each with their own version of your login directory.

Installed New Hard Drive and moved iPhoto library manually to new HD

I dragged my old iphoto library to new hd but when i opened it up i have a ton of duplicate photos and events dont seem to be in order? Any help with restoring iphoto events to their old self is greatly appreciated!

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

How to properly clean install: erase, partition hard drive, and install tiger then SL

Hello,
     I am a noob at this, so if responders would be kind enough to be detailed / specific with any instructions it would be most helpful! I own a dinosaur apparently (even though I don't think so): the white (not unibody) Intel macbook2,1 (late 2006) 1.83 GHz with currently 1GB of RAM, but I have 2x2GB RAM sitting next to me ready for install. However, first I would like to do a clean uninstall of my computer (running OS X 10.6.8 SL). I also would like to properly partition my hard drive while I'm at it.
     About 6 months ago I had serious crashing issues, along with kernel panics, hangs, applications randomly appearing & disappearing, system settings and options doing the same, fans running high (probably due to the low RAM available), and basically overall screwiness. So, after trying pretty much every option I could find on this community...and many others... (e.g. clean cache, clean old logs, already did a clean uninstall and install of SL, and much much more) I have reached my wits end. I would say that to date I've wasted a good solid 2 months with this.
     The clean install worked for MAYBE a month or so, but then it started acting up again with the fans (even without high pages in/out, CPU or memory usage) and excessive heat, along with the apps freezing and quitting (mind you it would be only two things open such as 1 word document and then firefox-- with flash disabeled). SOOOOOO long story short, I have purchased new RAM and I would like to try this once again, but to ensure I don't screw it up this time I would like some directions as to how to do the uninstall, partition, then reinstall. (currently to date I ensured all updates are completed---even though they are no longer released for SL, and I just did a full backup).
     Also, I need to first install Tiger (my original OS) as when I went to do a hardware test the other day this was not an option (and upon further research it is due to me not using Tiger as a first install and then using my mac box set for SL). I didn't use my original OS first because....one issue encountered when I had tried to install Tiger was that my Disc 2 (the applications one) took around 1.5 hrs to complete, but when I reached the last step of glory where I expected it to say COMPLETE it instead said that there was some sort of issue with the disc..........of course).
     Any help would be greatly appreciated.

1: If near a Apple Store or Authorized Repair, take it to then for a free evaluation, it might have other hardware problems now that it would be a waste of effort even continuing.
2: The RAM needs to be
Maximum Memory
3.0 GB (Actual) 2.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
Basically what this means is you can put in a 2GB module and a 1GB module for 3GB total.
I wouldn't proceed with installing RAM just yet, not until you get a stable OS X version on the machine, you might have a hard drive needing to be replaced as well which you can do while inserting new RAM.
3: This User Tip can assist in installing 10.6 Snow Leopard, partition format etc.
How to erase and install Snow Leopard 10.6
Software Update fully immediately after setup.
There is no need to install Tiger, he 10.6 disk contains the full 10.6 version, you can either install the iLife from Tiger disks or use Pacifist from Charlesoft to extract them and place on your new install, then Software update to get them current.
4: If not successful then the drive also likely needs to be replaced, if so choose a 7,200 RPM SATA I w/1.5Gb/s connection.
Install/upgrade RAM or storage drive in Mac's
Repeat #3
If your getting beeping noises or "you need to restart" issues, it's likely one or more of the RAM modules is bad. Have it exchanged or swapped.
I advise good quality RAM the first time, if you buy cheap stuff it's just going back.
Don't go any further than 10.6.8 with that old machine, the performance will be terrible.

PSE 9, external hard drives and moving to new computer

I had an old desktop running PSE 3, yep...3, and my husband bought me a new laptop. Laptop's operating system would not run PSE 3, so I purchased PSE 9, reconnected all my "misplaced" photo files, loaded PSE 9 on the old desktop and converted all files to 9. NOW, I am ready to move everything to the laptop and am unsure what would be best.
I have a large collection of photos and have always stored them on an external harddrive that I just plug in when needed. I purchased a second external hard drive that I am now using for backup ONLY, so I have 2 external HD's - (1) storage and (2) backup.
New laptop has PSE 9 installed and has a some newer photos in the organizer that are presently stored on the laptop harddrive. I have not done any tagging on the laptop because I didn't want to complicate matters. I now want to import my old catalog photos (stored on the external hard drive), including PSE tags. The part that causes me confusion is that I want to continue storing the photos on the external hard drive where they are. It seems counter productive to import, make new files on the laptop, then export back to where they were all along.
Gosh, I hope I'm making sense here. Anyone have any suggestions - simplest of terms, please, regarding how to get access to my photos and tags moved to the laptop if the fewest and easiest steps?

Ken, I am struggling with this. I have renamed the external harddrive with my photos, found the catalog and copied it to the external with the photos and have connected this external hard drive to the laptop (new computer).
I am now at step 5. of your first response. I have browsed and found the catalog, now my only two options are new or convert. I don't think I need to convert because I have already converted to from 3 to PSE 9 and don't really think it's a "new" catalog.
I need an "outline for dummies", please. If I didn't have so darn many photos, I'd be tempted to just start over. If it helps, I have written tag info to my files.
Thank you for all your patience and help.

Can't mount external Hard drive and Can't change the ownership and permiss.

Hello everyone, got a problem and maybe someone here will know. Apple care can't help because this is due to an external piece. I have a hard drive external. I partitioned it into two hard drives. Long ago, I opened the information window for one of my partitioned drives. And changed the ownership and permission to "no access". I do this all the time to keep my files from being read if its not the administrator (me). Just recently I plugged in my hard drive (firewire and USB). Only one drive mounts on the desk top. I cannot see my other partitioned hard drive and I can' access it to change the ownership and permission with "apple key and I".. I can see a trace of the two partitioned hard drives when I use disc utility. But again it won't let me change the ownership so I can mount this again. How do I access my harddrive without refomatting? I have tried to mount this with both of my apple laptops..no luck yet. Please help, anyone.

Hi, Donnie. Welcome to the Discussions.
What part of "No Access" was unclear?
"No Access" means no access for anyone.
To fix this:
1. Launch Terminal, which resides in the Macintosh HD > Applications > Utilities folder.
2. At the Terminal prompt, type the following command:
sudo chmod a+rwx "/Volumes/partition_name"
where: partition_name is the name of the affected partition.
3. Press Return.
4. Type your Admin password when prompted, then press Return.
5. At the Terminal prompt, type exit and press Return.
6. Quit (Command-Q) Terminal.
7. Relaunch Finder: Press and hold the Option key, click and hold mouse button 1 on the Finder icon in the Dock, select "Relaunch" from the Finder icon's contextual menu.
You should then see the volume, or be able to use Disk Utility to Unmount it, then Mount it and see it.
Reset the permissions for Group and Other on the partition as desired. Do not change the permissions for Owner.
If you want a volume / partition unmounted at startup, see:
• this tip Mac OS X Hints, or...
• this tip on the OSX86 Project forums.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

I am about to update to OS Lion. Will this affect a previously partitioned Hard Drive atall?

I have a partitioned hard drive and am about to install an operating system upgrade of LIon. With an already partitioned harddrive are there any issues that I need to be aware of such as loss of data on the windows portion etc?
Thanks for any help or experience you have .
GJLC

No, an OS X installation does not alter the partition map.
Back it up anyway, as a precaution against the unexpected.

Why did my iTunes music re-copy to my mac hard drive after moving them to an external?

I moved my iTunes to an external hard drive (following directions) but most of my files got re-copied to my computer. I have my preferences changed to have my library etc. in my external hard drive and moved all my other files to a desktop folder until I could confirm that everything copied over correctly.
However, now it appears that most (but possibly not all) of my music is again on my computer's hard drive. I don't know why this happened, or what steps I should take to fix it.
Bonus, now everything is duplicated, taking up twice as much room.
Thanks.

This appears to have worked, but I how can I be sure? If I transfer to the recycle bin, I have to permanently delete the files because they are too large. I did not do this. The files seem to be on the external hard drive.

I want to know if I can backup my Ipad to an external harddrive. I have a pc with xp pro media edition and a partitioned hard drive with very little space on C and lots on D. I am trying to update my Ipad to 5.1.1 and it says it needs 12 gb to backup.

I have a Sony Vaio desktop PC with a partitioned hard drive, running Windows XP Pro. There is 13 gb on C drive with the OS, and 140 gb left on D drive. I am trying to update my Original Ipad from 4.3.4 to 5.1.1 and because C drive is full ( I have moved everything that can be moved to D drive) mostly from Microsoft updates over the years, I am unable to do the backup Itunes is telling me I have to do to update or lose all media on this iPad. 12.67 gb is required to do the backup and I have a whopping 965.2 MB. I can not get the cloud to use as backup as it requires 5.0 or better. Does anyone know if I can back up to D drive, and if so how? Also, I have a 1 terrabyte WD mini external hard drive I just got as a gift...could I do the backup to it and, again, if so, how? Please explain from start to finish, as my brain is now fried from, first from finally getting Itunes updated to 10.6 ,and now trying to do this update. Thanks to anyone for their help!!

iOS device backups are stored in your iTunes library.
Move your iTunes library to an external drive.

Can I back up a bootable partition from an APM drive to a GUID-partitioned hard drive for storage, later to be able to clone restore the backup back to an APM and have it be bootable on a PowerPC?

Tongue twister of a question, huh?
I am creating a APM-partitioned hard drive for use with a PowerPC iMac G5, so I can have a fresh OS install on one as a reference, and the other be my usable OS. Now, I also want to back both of these partitions up on a storage hard drive that I also want to contain partitions that are bootable on an Intel mac (GUID). My question is, can I clone my APM partitions as backup to designated partitions on my GUID backup/storage hard drive (which I plan on being able to boot other partions on an Intel Mac), and have the option of later cloning the same APM partitions back to an APM-paritioned hard drive and have them still be bootable on a Power PC? I know I won't be able to boot a Power PC from off of the GUID-paritioned drive, but I want to be able to restore my APM-partitioned drive incase things go sour with it.
Thanks so much for your time, guys!

Block-level copier that copies not just the files but the filesystem structure as well. But files can be moved from GUID to APM partitioned devices without any effect on the file. The partition scheme affects whether an installed system will boot a particular type of hardware.
If you installed OS X on a GUID partitioned drive you would not be able to boot a PPC Mac.
And, you're most welcome.
Please note the items listed under Legend in the right sidebar of this page.

Help.......I moved my LR5 catalog to a new hard drive and lost my COLLECTIONS

I moved my LR5 catalog to a new hard drive and lost my COLLECTIONS. In the collections i get the messageI then locate the file in the new drive :
i locate the file and receive this message
How can i get the Collection to redirect to the new location?? I have about a LOT of missing pics in Collections.
Thank you! Jamie

Thank your for responding.......
To clarify....I moved LIGHTROOM to a new hard drive....including 1) Working catalogs, 2) Working exports, and 3) Working Originals. I now know i did not follow correct procedure for "moving a catalog". I dragged it to the new hard drive. Yikes!!
(I was at Imaging last week and spoke to Julianne Kost, she recommended that i use the FIND link....but this gave me the same result as i am speaking about above.)
To Clarify......The Collections are listed. The target path to the images did not change when i moved to the new hard drive.
There is an exclamation point in the right hand corner of the images in each collection. When i click on the exclamation mark i get the message....."“JK_120214_7782.NEF” could not be used because the original file could not be found. Would you like to locate it?" I then locate the file IN THE NEW current DRIVE...at which time i click on it and i receive the message.....
this file is associated with another photo in the catalog.... each file can only be associated with one photo. Then if i choose to show in library....it points to the image in the FOLDER tab...which is in fact where the image is located.
Up to this point, when i need one of these older collections i have had to recreate. i have manually gone to the original.....in the FOLDER tab, found the image and added to the Collections again. Then i go back and delete all the files with the ! ......a long and tedious task. I was hoping there was an easier way to recreate my "collections".
Initially i was going to just MOVE the entire library again ( the correct way) ....which i should've done i believe. Now i have imported more jobs and have created additional collections , so i'd love to find a short cut!
I hope this is a bit more clear!!
Thank you.

Moving LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?

I moved LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?
The meta data for each image is missing.
I have over 2,000 images. I don't want to go back through each image and add meta data.
Is there some way to move everything?

No, do not re-import your images. I assume you can see the thumbnails in the library module, just cannot access the full images, right? If this is the case there should be an exclamation mark in the top right corner of every one of your pictures and you only have to tell LR where the images are now.
Click the exclamation mark of one of the images and a dialog window should pop-up, telling you that LR cannot find the file, but with an option to locate it. Press "Locate" and navigate to the folder on your new HD where the file is. If in the new external HD you kept the same folder structure that you had on the internal disk, LR will be able to find all your images and re-link them to the database without further intervention.

I redirected iTunes to an external drive and moved my iTunes library and folder, but my hard drive is still low on space. How can I be sure that my music is all on the external HD ONLY, especially with the new iCloud technology?

I redirected iTunes to an external drive and moved my iTunes library and folder, but my hard drive is still low on space. How can I be sure that my music is all on the external HD ONLY, especially with the new iCloud technology? It doesn't look like I created any more space by doing this, AND I totally lost all my iTunes playlists. I'm not sure if because I added old library materials manually if this messed up my playlists, or if the new location is just not reading my moved library. In any case, I followed step by step instructions and found a few holes and thought I'd just "figure it out" but I guess I'm not as smart as I thought since I'm still scratching my head many hours later.
Thanks for any support ;-)
Eaglerocker

Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to select a library, then guide it to the 'iTunes Library.itl' file in the moved iTunes folder.
If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.

HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanen

I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.

I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend

Can i make (for example) 3 partitions on my external Hard Drive, and make different formatations for each, so i can share files of one of them in a pc and mac?

Hello ...
My name is Rui, i'm from Portugal ... (so please be patiente with my english, it can get a bit confusing)
so... first of all ... i have to say ... i'm still a pc user ... i don't have a Mac ... yet ... they are sold out right now in the shops near me ... i am waitting for them to arrive so i can pick up mine ... (i wish in a couple of days i will be entering the Mac world ....) ... i'll be picking the "entery" iMac model, the 21,5'', i5 with 500gb hard disk ... well .. i know it's the cheapest one (i hope it is a good machine tho) ... but it's my entering Mac world too (my only apple products till know were the ipod ...) ... one of my concerns are being the 500gb hard drive ... that for my pc experience is a little bit short ... that makes me a little scared (but paying 300e for the next model to have a 1tb disk, it's not a good option for me right now) ...
so..
I've been reading a lot about iMac's ans OS X so i can get familiar with this all new world ...
and i couldn't get any answer for some of my doubts... so i decided to ask you Mac Users ..
My idea is to have an external HD to store files (and not to fill the 500gb of the iMac) ... and i am wondering if it would be possible to make this ...
- make three partitions on the external Hard Drive and
- the first be formatted in Mac OS extended (journaled) mode
- the second on fat 32 - so i can store and share files with a mac or pc
- third be reserved for Time Machine
i wonder would that be possible... or would make sort of incompabilities ... would it work all well ?
hummm ...
I hope someone can help me with this ...
... if it is a silly question ... sorry ... but please remember, i've never had a Mac computer (i'm waiting for my 1st iMac to be available on store) ... so a lot of things are "flying" in my head right now ...
... and of course .. sorry for my english ... i hope you all understood me ...
thanks (obrigado) a lot for your patience...
Rui from Portugal

Hi! Dwagner, once again ...
I've just got my Mac last friday ... i'm still getting amazed with this new world to me ... eehe .. quite different ... but
... "i can do it, i can do it" eheeh
i'm in that period that a new question appears at almost every mouse click ... lol
so ... can you help me (once again) ..
you said you had your hard drive with this settings...
"You can partition for OSX (extended Journal) - read/write by only OSX or read only by Windows via BootCamp
You can partition for Windows (NTFS) - readable by only Windows
OR - you can format with ex-FAT and this is read/write capable for both operating systems."
how did you formated the partition in NTFS ? ... on the mac? using the "disk utility" ? or did you use another program to do so ...?
i hope i'm not "bugging" you ... this might be a silly question for most of people ... but right now ... it's a major question for me ... ehehe
once again Obrigado (Thank You)
Rui from Portugal

Partitioning hard drive and moving pics

Similar Messages

Maybe you are looking for