Partitioning in Bootcamp using Mountain Lion
When trying to download Mountain Lion, I was given an error message that stated that there was a conflict with Bootcamp. I went to Disk Utilities and Erased Bootcamp, hoping that would solve the problem and was correct. However, now that Mountain Lion is downloaded, I have Bootcamp as a slot appearing like my Harddrive, but there's no information. When I try and partition again to download Windows 7, I'm given an error message "The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows."
How do I do this?
Dan Smithson wrote:
I've gone to the Partition tab, but not finding an option to delete the Bootcamp partition - the other being my main harddrive. It did allow me to partition either one, and I'll try to use Bootcamp Assistant to remove one of them, but earlier attempts wouldn't ever show the partitioning option. That's why it gave the error message.
Nevermind - I figured out the +/- tools and deleted the Bootcamp partition, but afterwards using Bootcamp Assistant, it still won't give me the partitioning option. Unsure why.
Because you removed the original partition incorrectly.
Clone your drive, erase your drive, repartition your drive and then restore your clone.
Similar Messages
-
On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.
Yes, purchase Paragon Camp Tune for the job.
-
I am running Snow Leopard 10.6.8 with bootcamp 3.3 on my Imac 2011. I need to updgrade to mountain lion. If I first upgrade to mountain lion, how do I go about upgrading from bootcamp 3.3 to latest bootcamp for mountain lion?
I have seen a lot of discussions upgrading from Boot Camp 4 to 5 but no answers upgrading from boot camp 3.3 to 5. My worry is that if I upgrade from snow leopard to mountain lion, that my bootcamp partition will no longer be able to boot up. There seem to be a lot of threads suggesting problems that are possible. Has anyone gone through this upgrade with success?Before doing any installation restart OSX from your 10.6 Snow Leopard DVD and use Disk Utility to Both Repair The Disk and Repair the Permissions of your Macintosh HD.
Next remove your Snow Leopard DVD and restart your iMac into OSX.
Update to the latest version of OS X Snow Leopard by clicking the Apple icon and choose Software Update to install Snow Leopard v10.6.8, the latest version.
Use Time Machine to make a Full Backup of your Macintosh HD.
Shut down and restart into Windows by holding the Option key at the chime and selecting Windows.
Now use Windows Backup to make a Full Image Backup of your Windows Installation to a removable drive.
Shut Down and Boot back into OSX.
Open the Mac App Store from your Dock to buy and download Mountain Lion. Then follow the onscreen instructions to install it.
Upgrading your OSX to 10.8 should not effect the Windows Partition at all since you are only upgrading the Mac side. You should not have to run the Boot Camp Assitant 5 Utility in OSX at all.
Your Boot Camp 3.3 Windows Support Drivers et. al only effect your Windows installation and should continue to run fine after upgrading.
Which version of Windows do you already have installed on the existing Boot Camp Partition?
Is it 32 bit or 64 bit? -
Using Mountain Lion Server so my family can have separate logins and connect via Screen Share.
Works great, each has their own home directory and permissions are perfect.
Now setting up iTunes for each with their own Library (not shared), thus keeping multiple Libraries.
I get this;
This Computer is already associated with an Apple ID.
If you download past purchases with your Apple ID, you
cannot auto-download past purchases with a different
Apple ID for 90 days.
What!
So what it is on the same computer, they are completely separate Libraries never to be mixed.
If this works, I only need to keep one computer up and running, instead of three.
Each can do their syncing/backup and connect to the various Airplay/AppleTVs I have around the house.
How do I fix this.
ThanksBottom line is you can't - easily.
You need to make sure that you log out of the server each time otherwise the ID is running. To explain, if you had a laptop with different people using it, your solution works fine. Each time someone logs in, the iTunes ID is different so it works as you can only have one person using the laptop at any one time.
Now, turning your problem inside-out, you want people to be able to log into iTunes concurrently to use their own version of the program with their own library. This does not seem to work and you get the conflicted ID error message. Even though iTunes is running under their own login ident, I have never been able to get this working reliably and was told that iTunes is NOT a network-aware application as it is designed to be single user.
The way I got around this was to login as XYZ and to make sure that the ID was changed in iTunes accordingly. However, it did not always work so I gave up with the whole thing. -
My 2006 iMac is getting a bit long in the tooth and I was thinking of replacing it with a new one. However, Mac have not included an optical drive and I back up my photographs on DVD as well as external hard drives. I also supply DVDs of my work to friends etc.
Will I be able to burn to an external drive using Mountain Lion or other software such as Toast? Does the burn option still exist on the new machines?Hello,
You shouldn't have any problem, if you do just try Burn...
http://burn-osx.sourceforge.net/Pages/English/home.html -
I have lost my iCal data and am having a hard time retrieving it from Time Capsule. I am using Mountain Lion OS om iMac. Can anyone help?
You cannot see it because it is hidden.. one of those great things apple does.. if it is hidden in your Mac then it will be hidden in the Time Machine Backup.
You will need to restore the entire folder to a different location.. and unhide it.
There is some info here about restoring particular files or folders.
http://pondini.org/TM/16.html
And some info from Lion which should also relate to Mountain Lion.
https://discussions.apple.com/thread/3231381?start=0&tstart=0
There is stuff about recovery near the end.
One wonders sometimes when Apple make these decisions if they ever think about what happens when something goes wrong. Hiding files..??? -
I am using Mountain Lion iOS and trying to connect my MacBook Pro to my plasma TV using AppleTV and AirPlay mirroring. The video does just fine. However, there is no audio coming from the TV. After activating AirPlay I try to select Apple TV as the audio output in System Preferences and it highlights it but then immediately goes back to Internal Speakers and only has sound coming from the MacBook Pro..
What's going wrong ?????
AJAre you sure that WIFI network doesn't have an AppleTV on it? Just because you don't own it doesn't mean there isn't one on that network. The laptop or better said the OS cannot differentiate between an AppleTV that you own or not. If it sees one on the network, it will show you one as being available. The automatic reconnection is happening probably because the last time you streamed to an AppleTV, you didn't drop that connection before sleeping the computer or shutting down iTunes.
-
"Merging data" error when syncing iPhone 5s Calendar to MacBook Pro Calendar, using Mountain Lion
Since a failed attempt to sync data via iCloud (resulting in duplicate entries in Calendar and Contacts, missing data, and other oddities), whenever I try to sync the Calendars via iTunes, I repeatedly get the error message, "iTunes could not sync calendars to the iPhone <name> because an error occurred while merging data." The Contacts sync fine, and the backup runs smoothly. The only discussions I can find in Apple Support are dated 2009 with older systems (I'm using Mountain Lion 10.8.5, iTunes 11.1.5, iOS 7.1.1, but the problem occurred with iOS 7.0 and possibly 6.0 as well). Repairing permissions had no effect. I can't use the option to copy the Mac Calendar to the iPhone because new data are entered into the iPhone. Would appreciate guidance. I'm trying to avoid iCloud but if I have to go there to fix this, guidance for that would also be welcome.
I have iPhone 5 with iOS 6.1.4 and iMac with Mavericks 10.9.3 and iTunes 11.2.1.
I also got this error when I tried to sync iPhone with iMac (after a year when Apple disabled local USB cabel sync in Mavericks - thanks Apple for re-enabling it!).
I tried a number of things to no avail. Finally I tried three things - and hurraaa, can sync now! Unfortunatelly I didn't test sync among these three steps - so don't know which one fixed it - up to you to try. My guess is that it was the 3rd step, actually
Step 1: On my iPhone I opened Calendar and tap "Calendars" (top left). I have 7 items on the list (2 email accounts, Calendar, Home, Work, Reminders, Birthdays). Most of the calendar entries were in my Home calendar, only a few were in Work or Birthdays. I moved all of them to Home. I also checked whether there aren't any items without content.
Step 2: On the list of Calendars I had one custom item (Birthday in my local language). This item had only one entry in it. I deleted both the single entry and the custom item as a whole - so I left the default categories only.
Step 3: At the top of the list of Calendars there is an item "All from My Mac". I tapped this and thus enabled all of my calendar categories. Now the sync worked like a charm!
I actually noticed that when I synced, iTunes automatically checked all items under "Sync Calendars - Selected Calendars". Even if I manually deselected all except the "Home" calendar, as soon as I started to sync, iTunes checked all items automatically. This led me to thinking that if I check "All from My Mac" item in my iPhone it might work.
Good luck with your sync issue, hope you'll solve it. -
I manage 60 ipads for a school using Apple Configurator. Need to update my devices to iOS7 and Apple Configurator to 1.4.3...Is it best to use Mountain Lion or Mavericks, as I also need to update from Lion 10.7 for the new Apple Configurator and iOS7 to work properly.
I always run a Time Machine backup before updating anything and recommend you run a backup as well. Paid apps should migrate over without any problem. If you have problems with VPP codes not transfering over properly, you can talk to your Apple SE or contact VPP for Education support and they can help you. While I haven't experienced any problems with updating, its never a guarantee that others will have the same experience.
Good luck!
~Joe -
I am using Mountain Lion OS. Somehow, while trying to sort oout problems with my ISP, my mail changed appearances. I cannot seem to get it back to the original settings. Any help would be appreciated. Thanks!
Hello there, WNC007.
The following Knowledge Base article offers some pointers on the different viewing preferences for Mail for Mountain Lion:
Mail (Mountain Lion): Viewing preferences
http://support.apple.com/kb/PH11698
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Using Mountain Lion (OS 10.8), in Contacts, how can I show a count of number of contacts total and/or number of contacts in a group?
If you scroll the list to the bottom, there might be a count. I haven't figured out why you sometimes get a count and other times you don't.
-
Incorrect link to "OS X: How to migrate data from another Mac using Mountain Lion and earlier". Should be http://support.apple.com/kb/HT6025
I think the OP is saying OS X: How to migrate data from another Mac using Mountain Lion and earlier (which should be a link to HT4889) just links back to OS X: How to migrate data from another Mac using Mavericks (HT5872).
It does indeed do that, & HT4889 seems to be MIA. -
Yesterday, I purchased Mountain Lion OSX and tried to download it but I don't think the download worked. How can I tell if I am using Mountain Lion and how do I get help if the download was unsuccessful?
Click your Apple menu icon top left corner of your screen.
From the drop down menu click About This Mac.
If Mountain Lion is installed, it will say: v10.8
If not, launch the App Store. From the App Store menu bar click Store > Check for Unfinished Downloads
FYI .. for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
If you need to reinstall OS X or repair the the startup disk Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation. -
Any way to improve response time with iPhoto 8.1.2 using Mountain Lion ?
Any way to improve response time with iPhoto 8.1.2 using Mountain Lion ? Can you store photos on a separate hard drive and use a smaller file for openning iphoto?
How did you move your iPhoto library to the new system? the recommended way is Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN -
I need to buy a new MBP for my business. Luckily, I had an opportunity to try one (15", i7, OS 10.8) before placing an order. Since my present machines are still on OS 10.7, I was new to Mountain Lion. I really liked it - until I started using it at the actual work site (rural Pennsylvania) without any network connection (even my iPhone is dead there). The lack of online service did not bother me because the only work I need to do on the laptop at this site is data and word processing. However, nothing seemed to work in Mountain Lion while offline. Help, Preview, iWork, Office 2011, Acrobat Pro and a bunch of other programs I used on my regular office's LAN without a problem, suddenly became unresponsive or gave me the spinning beachball for a minute (probably due to some network timeout). I tried to make it clear to the OS that I am in the boonies by setting up a "No network" location in Network Preferences with all network interfaces turned off. Some apps, like Preview, simply switched back to the "LAN" location I use in my regular office — then crashed. Being new to Mountain Lion, I also needed to run Help but it either told me that help is available online, or waited for a minute then came up with some basic advice for Mac newbies.
My questions are:
What are the settings (including using the Terminal) that tells Mountain Lion that I am offline and that it should not pause for incoming data because not a single bit will come?
What I am I doing wrong that prevents me to use Mountain Lion offline without loosing functionality in applications that do not external data?
ThanksPlease read this whole message before doing anything. This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it. The purpose of this test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.
Maybe you are looking for
-
URGENT HELP!!!!! Deauthorization!!!!!
I need urgent help!! I have authorized my account on my computer and one other computer, but recently i copied some music onto my friends ipod from my computer. He went home to his house, and plugged in his ipod, a messege came up and he now has acce
-
How large of a print can I make from my iphone4?
Hello, I am wondering if I printed out a five by seven print from my iphone four, if this would be of framable quality. Thanks for your time, and your help!
-
Code to reconsile the accounts on OIM
write a program to mass creating resource objects for ABC account and ABC responsibility The ABC resource objects have been implemented on OIM. A few hundreds of ABC accounts and ABC responsibilities are mass created in ABC. Then, the ABC team provid
-
XML Schema Based Table and ORA-22814
When I want to insert clob into XML Schema Based Table, ORA-22814 was occured. Why?
-
"copy to folder" for emails missing from latest Ns...
As already mentioned elsewhere, there are a lot of user complaints about this basic feature missing from many Nseries phones (N95, N78, etc). Is Nokia listening and/or planning a firmware upgrade for symbian S60v3 phones? /discussions/board/message?b