Partitioning Problem for non-techie

Hey guys,
So I'm trying to install windows, and each time I used the Boot camp assistant, and start partitioning the drive so that I give Windows 32 GB, I get the follow error "Some files could not be moved" and "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." Why is this happened? And what does that mean? What should I do?
I should add that I've never partitioned the disk before, so I don't know why it says my hard drive is not a single volume.
Thanks
Message was edited by: bglick

bglick wrote:
No problem Stephan,
Thanks a lot for your help by the way and sorry for taking so long to grasp this concept. Ok, so once I copy my internal hard-drive to my external, and then boot off of my external, do I wipe my entire inner hard drive, by using disk utility and click restore? Will that delete everything on my internal? And then I copy my external to my internal. And then I run bootcamp?
After booting of the external HD you just have to run SuperDuper (or CCC) again an copy/clone your external HD to your internal HD.
The content of your internal HD would be deleted during the process, so no need to do it manually.
Why can't I just delete my internal hard drive and then reset it so its like I'm turning on my computer on for the first time, set up anew user account, set up bootcamp (my hard drive will basically be empty). Then once windows is all set up. Setup a new user account and use time machine to make that new user account like the one I'm using now?
I admit that I haven't ever used Time Machine, because I use SuperDuper for backup and don't need Time Machine.
Nonetheless you might use Time Machine for your purpose as well.
Boot of the OSX Leopard DVD that came with your Mac )holding down the 'C'-key at startup and from the Top Menu first use Disk Utility to reformat your internal HD and the choose 'Restore System from Time Machine'
(Both are to be found in the 'Utilities' section of the Top Menu).
Stefan

Similar Messages

  • Partition InfoCubes for non-cumulatives

    Hi,
    I would like to partition inventory cube 0IC_C03 that consists of non-cummulatives. The partition was executed from 12.2007 to 12.2010. I would like to add partition to 12.2012 via option "Adding Partitions". There was error prompt that infocube for non-cummulative has to carry out by using option "complete repartitioning".
    Can expert please share with me what would be the recoomendation in order to enter the correct value for complete repartitioning?
    Thanks and regards,
    Kang Ring

    Hi,
    Not able to select by Year, the only active option is 0CALMONTH.
    Regards,
    Kang Ring

  • IPhone 5 Newbie-Best way for non-tech savvy to start?

    I'm a non tech savvy 60 something lady who has just switched from an old flip phone to the iPhone 5 16gb (yesterday!) with Verizon. What would be the best use of my time to learn how it all works? I want to get good at making and receiving calls, sending and receiving texts, backing up my phone, knowing how to protect and extend the battery life, etc. Thanks in advance!

    Thanks! This morning, battery is low so I figure out I'd better learn how to charge it quickly. First, I had to figure out how to take it out of my Otter Box to find where to charge it. Then, I plugged my home charger in the phone and the electrical outlet, but nothing seems to be happening. My battery symbol just has a little thin red line showing. I tried calling Verizon and they told me to take it back to the store where I bought it. I tried calling Apple, but they wanted my phone serial number and I don't know where to find it. Is it the number on the box, or the one engraved on the back of the phone, or the numbers on my store purchase receipt? I know you experienced users think I must be dense, but this is all making me crazy!

  • K1 ICS for non-techs

    Would it be of any value to have a tread for non-technical types who have an interest to install ICS but don't understand the other treads.It would require some help from some of the technical people and Mark to let us knew when it's the right time to install and 'how to' in more basic terms.Thanks in advance for any help/guidance.

    Here you go. Tried to spell out things very simple.
    http://forums.lenovo.com/t5/IdeaPad-IdeaTab-Slate-Tablets/Fully-working-Play-Store-Guide-FAQ-for-ICS...

  • I could not see how to continue after upgrade to firefox 4. This has never been a problem with ast upgrades. I am finding Firefox to be very user unfriendly for non-tech people.

    I am being told that my current version of firefox is no longer protected. When I tried to upgrade to firefox 4 some time ago, the menu bar(?) was gone--no bookmarks. I set my computer back to an earlier date to get my book marks back and have been afraid to attempt this upgrade again. Firefox also appears to have tried to do the upgrade automatically and says I have incompatible add-ons. I have never had problems with previous updates. I have read negative reviews of firefox 4 and am frankly afraid of it. I hate to leave firefox and am afraid of losing my book marks as well. I find the "Help" forums etc. here extremely difficult to navigate and they seem to be aimed at people who are more tech savy than many of us are.

    #Firefox 3.5.19 which you are using is no longer supported and is not being updated for any issues, including security problems.
    #The Menu Bar (File, Edit, View, History, Bookmarks, Tools, Help) was replaced in Firefox 4 by the "Firefox button" in the upper left corner
    #*You can turn the Menu Bar back on by doing one of the following in Firefox 4:
    #**click Firefox button, click Options, click Menu Bar to select it
    #**HOLD down the ALT key while pressing the keyboard letters VTM
    #**right-click on an empty space in the Navigation Toolbar, then click Menu Bar to select it.
    #Some information about Firefox 4 changes:
    #*https://www.mozilla.com/en-US/firefox/features/
    #*there is a link "watch the video" under '''''Improved Interface''''' on the above page
    #You can make Firefox 4 look more like prior versions: http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/
    Your bookmarks should be safe during the upgrade; they are in a separate place on your hard drive. You should keep them backed-up in case of any problems with your system. See:
    *https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information#w_backing-up-your-profile
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Problems for non-US citizens accessing english-only content

    Hello,
    I recently switched to Mac OS X and became a registered Apple Developer. I live in Austria, my mother tongue is german, but I have to use english most of the time during work.
    I already used the Apple Store (I enrolled in both the Mac Developer and iPhone Developer program). When registering, I had to provide an austrian address for the billing.
    Now, I'd like to use the english content of iTunes, mainly the Developer on iTunes (iTunes_U), which I like a lot.
    The problem is, I have to switch the contry setting in iTunes back to US when searching for english content. But everytime I reach some non-free content (which can be bought), iTunes complains that my account is valid for Austria only and get logged out and find myself on the landing page with german content. So I have to log in again, switch country back to US and do the game again. This happens very often (more than 10 times a day) and is very frustrating.
    What do you suggest I can do?

    First, I'd suggest you post questions in the iTunes for Mac forum. You're more likely to get useful assistance there than you will here in the iTunes for Windows forum where solutions are often quite different.
    As to your problem, sorry, but I'm afraid that there is probably not going to be an easy solution for you. The iTunes Store in Austria is only available in German, so unless the institution whose content in iTunes U you wish to access makes that content available in English in the Austrian iTunes U or from another source, switching countries back and forth will continue to be necessary if you need that content in English.
    The only suggestion I would have would be to set up a separate user account in Mac OS X, connect that account's iTunes to the US iTunes U site, and use Fast User Switching to go back and forth between the Mac OS X accounts. That might be less cumbersome than constantly having to switch iTunes between iTunes Stores.
    Regards.

  • Partition problems for OSX upgrade! YIPES!!

    Hello,
    I have an original bondi blue imac with an upgraded 466mhz chip and a 40G harddrive. I have performed all of the tasks required to upgrade to OSX
    I have acquired the system on BLACK Cds (10.3.5)
    I have upgraded my firmware
    I have backed up my files
    I have partitioned the drive with one partition being 8G the other whatever is left.
    and THEN I have inserted the disk 1 into the drive and proceeded.
    but I was returned the message "neither of your partitions is in the first 8G of the drive" so I assumed that I had mistaken the picture and that the top was the end of the drive not the beginning so I repartitioned the drive and now when I puyt the disk 1 in and start again I just get two exclamation marks and cannot click either of them.
    what am I doing wrong?
    It has been such a long journey for me to get to this point I am pretty zen about it but I am getting closer and closer to FLIPPING OUTOUOUTOUTOU!!
    smiles
    and thanks for any help that you can give me!!
    kt
    iMac G3 bondi :: imac G5 isight   Mac OS X (10.4.5)  

    Make the first partition 7.8GB. The operative word is under 8 GB. You should be good-to-go from there.
    It's confusing!
    David

  • Account Determination Problem for Non valuated PO

    Hi Friends,
    I Have a Non Valuated Material.For that i have created a Purchase order for which the Account assignment Category is K-Costcenter.
    At the time of GR i am getting Error in account detremination for Transcation Event Key KBS.
    For a Non Valuated PO is it necessary to create a Accounting Document at the time of GR.
    If So how to assign GL for KBS as account determination is not Possible for KBS in OBYC.
    I have assigned the Link for Cost center and GL in OKB9 also.
    Please advice how to solve this.
    Tks/Rgds
    Ganapathysubramanian.V

    Hi,
    Yes. it has to be in unchecked mode.i regret the same.
    SAP Help wording 'Purchase order with account assignment (KBS)
    You cannot assign this transaction/event key to an account. It means that the account assignment is adopted from the purchase order and is used for the purpose of determining the posting keys for the goods receipt.
    http://help.sap.com/saphelp_46c/helpdata/en/90/7155967935d1118b3f0060b03ca329/frameset.htm
    But however please refer to the below links.
    Re: Account-assigned purchase order KBS is not activated
    Regards,

  • Help for non tech person

    Itunes. when I bring up itunes on my desktop it loads no problem. speakers are on. when I click on a song the little microphone appears next to it but the song does not play and the timer box at the top stays on zero time(doesn't move across a song plays. Its like its on pause. worked fine the other evening and have no clue what I might have done
    thank you

    1. Remove Avast according to the developers instructions.
    2. Adware  Genieo is installed without your knowledge. Removing it will help,
    1. Download and use free AdwareMedic to remove the adware
        http://www.adwaremedic.com/index.php
        Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
        Once done, quit AdwareMedic.
    2. Safari > Preferences > Extensions
         Turn those off and relaunch Safari to test .
         Turn those on one by one and test.
    3. Safari > Preferences >  Search > Search Engine :
        Select your preferred   search engine.

  • Create a 1-click setup for a Remote Desktop session for non-tech users

    Hi everyone,
    I know how to configure a VPN or use port forwarding for VNC, ARD, etc. and know about iChat's Screen Sharing feature and sites like LogMeIn. But I'm looking for something special here. This is the situation:
    • A user calls me for help and I would prefer a Remote Desktop session
    • He's usually behind a NAT router which hasn't been set up to allow remote access
    • He's absolutely NOT tech savy
    So I'd like to have an easy way to allow me to initiate a Remote Desktop session (ARD/VNC) with as little user interaction needed as possible. I don't want to walk him through reconfiguring his router on the phone!
    I was thinking of using iChat's Screen Sharing first. But I'd need to create a jabber account, save iChat's preference file, maybe pack it into a little "Installer" and mail it to him. So all he needs to do is double-click it and run iChat afterwards and accept me.
    But this is a little too much for my taste and I'm wondering if there isn't already a "best practice" or something like that. Any ideas or suggestions?
    Thanks a lot!
    Björn

    I've recently started using TeamViewer. If you can walk a person through going to http://www.teamviewer.com and clicking on "Start Full Version" and getting them to download it and run it, then you're good to go. It's cross-platform both ways so you can control a Mac from a PC and a PC from a Mac in addition to M-M and P-P. If they're on a PC, the download is an executable which when they double-click it, asks them if they'd like to run it or install it. Just have them run it and in a few seconds they will have an ID number and random password generated that they can tell you over the phone. Then you type it into your TeamViewer app and you're controlling their screen. If they're on a Mac, the download is a disk image so you have them mount it and then just run the app directly from the disk image. Once you're connected you can fully install the app for future use or just help them out. It's pretty much the simplest cross-platform control system I've found to deal with situations where it's not already setup for me to support. On top of all that, it's free for personal use!
    Jeff

  • Steps to Transfer mail from Older MBP 10.6.8 to Newer MBP 10.8.5 for NON-tech person  I really just need the simplest solution.  I have cleaned out old folders on the OMBP, but there are folders I need for work

    I really just need the simplest solution.  I have cleaned out old folders on the OMBP, but there are folders I need for work.
    I am not a technical person.  I have gone online and read a gazillion "All Ya Gotta Do...." to the point where my head swims.
    I backed up my older MBP onto WD Passport Studio via Time Machine.
    I transferred all my files there and put them all onto the newer MBP.
    I expected to see Mail but did not.
    Someone said just use Migration Assistant, but I dont find that anywhere.
    Please dont say iCloud because I dont even know what it is.  Sorry, but I just dont use my Mac other than for work, meaning online access for research, and then typing reports of various kinds... and for emailing.
    Can I just hook the firewire directly from OMBP to NMBP and copy them that way??
    Sorry I am such a dolt, but I really just want easy step by step instructions, thank you.
    Would the Genius Bar at my local store be able to help me???
    Thank you,

    Okey Dokey!
    I followed the steps for the Target Disk thing, and was able to transfer everything on my old desktop, in my old pictures file...  all the final transfers regarding my documents and photos.
    BUT 
    there were no folders for Mail, and when I went to the only folder I could find that said "Mail" -- which was under "applications" it then told me that I could not transfer old "mail" to new "mail" since they were different versions...
    Now THIS makes sense,,, and I was not looking to do that... 
    but how do I find all my mail folders???? 
    Is there someplace I should be saving them in order to get them???
    Do you mind helping me with instructions on how to do this?
    Thanks!

  • Problem with Non JSF Request to JSF Page

    Hi All,
    I am working on dynamic controls generation based on the request come from non jsf page
    For the first request, pageworks perfectly. but when we go for second request, it is not rendering and I am getting same old page.
    What I have identified is if I have 2 pages as JSF, application is not giving any problem.
    For this I have written small test application contains both JSF pages only.
    page1 contains 3 submit buttons.
    When submit buttons are clicked based on the request, I get, am able to see the dynamic controls.
    SO there is no problem with JSF PAGE to JSF Page Communication
    Now I have done some changes in First JSF page. Instead of submitting directly I am submitting the page through JavaScript which is nonb JSF request. There I am facing the problem and based on requested qaction I am not able to see correct rendered page based on the requested action.
    Any Idea why it is giving problem for non JSF requests??
    Thanks
    Sudhakar

    For Your Convenience in understanding the problem
    I am pasting entire test code
    Page 1 -- (here page2 is Page1 and Page1 is page2 - some naming convention errors :) )
    <?xml version="1.0" encoding="UTF-8"?>
    <jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
        <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
        <jsp:text><![CDATA[
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    ]]></jsp:text>
        <f:view>
            <html lang="en-US" xml:lang="en-US">
                <head>
                    <meta content="no-cache" http-equiv="Cache-Control"/>
                    <meta content="no-cache" http-equiv="Pragma"/>
                    <title>Page2 Title</title>
                    <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
                </head>
                <body style="-rave-layout: grid">
                    <h:form binding="#{Page2.form1}" id="form1">
    <!-- Non JSF REquests -->
                        <h:commandButton action="#{Page2.button1_action}" binding="#{Page2.button1}" id="button1" style="left: 48px; top: 48px; position: absolute" value="Submit" onclick="document.forms['form1'].action='faces/Page2.jsp?id=1'; document.forms['form1'].submit(); return false;"/>
                        <h:commandButton action="#{Page2.button2_action}" binding="#{Page2.button2}" id="button2" style="left: 48px; top: 96px; position: absolute" value="Submit" onclick="document.forms['form1'].action='faces/Page2.jsp?id=2'; document.forms['form1'].submit(); return false;"/>
                        <h:commandButton action="#{Page2.button3_action}" binding="#{Page2.button3}" id="button3" style="left: 48px; top: 144px; position: absolute" value="Submit" onclick="document.forms['form1'].action='faces/Page2.jsp?id=3'; document.forms['form1'].submit(); return false;"/>
    <!-- this  is JSF request -->
                        <!--
                        <h:commandButton action="#{Page2.button1_action}" binding="#{Page2.button1}" id="button1" style="left: 48px; top: 48px; position: absolute" value="Submit" />
                        <h:commandButton action="#{Page2.button2_action}" binding="#{Page2.button2}" id="button2" style="left: 48px; top: 96px; position: absolute" value="Submit" />
                        <h:commandButton action="#{Page2.button3_action}" binding="#{Page2.button3}" id="button3" style="left: 48px; top: 144px; position: absolute" value="Submit" />-->
                    </h:form>
                </body>
            </html>
        </f:view>
    </jsp:root>Page1 Bean
    * Page2.java
    * Created on June 25, 2005, 11:08 AM
    * Copyright user
    package webapplication8;
    import javax.faces.*;
    import com.sun.jsfcl.app.*;
    import javax.faces.component.html.*;
    import javax.faces.context.ExternalContext;
    import javax.faces.context.FacesContext;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.http.HttpServletResponse;
    import javax.servlet.http.HttpSession;
    public class Page2 extends AbstractPageBean {
        // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
        private int __placeholder;
        private HtmlForm form1 = new HtmlForm();
        public HtmlForm getForm1() {
            return form1;
        public void setForm1(HtmlForm hf) {
            this.form1 = hf;
        private HtmlCommandButton button1 = new HtmlCommandButton();
        public HtmlCommandButton getButton1() {
            return button1;
        public void setButton1(HtmlCommandButton hcb) {
            this.button1 = hcb;
        private HtmlCommandButton button2 = new HtmlCommandButton();
        public HtmlCommandButton getButton2() {
            return button2;
        public void setButton2(HtmlCommandButton hcb) {
            this.button2 = hcb;
        private HtmlCommandButton button3 = new HtmlCommandButton();
        public HtmlCommandButton getButton3() {
            return button3;
        public void setButton3(HtmlCommandButton hcb) {
            this.button3 = hcb;
        // </editor-fold>
        public Page2() {
            // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
            try {
            } catch (Exception e) {
                log("Page2 Initialization Failure", e);
                throw e instanceof javax.faces.FacesException ? (FacesException) e: new FacesException(e);
            // </editor-fold>
            // Additional user provided initialization code
        protected webapplication8.ApplicationBean1 getApplicationBean1() {
            return (webapplication8.ApplicationBean1)getBean("ApplicationBean1");
        protected webapplication8.SessionBean1 getSessionBean1() {
            return (webapplication8.SessionBean1)getBean("SessionBean1");
         * Bean cleanup.
        protected void afterRenderResponse() {
        public String button1_action()  throws Exception{
            // TODO Following code was replaced by static navigation
           getSessionBean1().setId(1);       
          /* ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
           HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
           HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
           res.sendRedirect("http://localhost:18080/webapplication8/faces/Page2.jsp");
           return null;*/
            return "case1";
        public String button2_action()  throws Exception{
            // TODO Following code was replaced by static navigation
                getSessionBean1().setId(2);
          /*  ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
           HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
           HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
           res.sendRedirect("http://localhost:18080/webapplication8/faces/Page2.jsp");
           return null;*/
            return "case2";
        public String button3_action() throws Exception{
            // TODO Following code was replaced by static navigation
                getSessionBean1().setId(3);
            /*    ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
           HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
           HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
           res.sendRedirect("http://localhost:18080/webapplication8/faces/Page2.jsp");
            return null;*/
            return "case3";
    }page 2
    <?xml version="1.0" encoding="UTF-8"?>
    <jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
        <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
        <jsp:text><![CDATA[
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    ]]></jsp:text>
        <f:view>
            <html lang="en-US" xml:lang="en-US">
                <head>
                    <meta content="no-cache" http-equiv="Cache-Control"/>
                    <meta content="no-cache" http-equiv="Pragma"/>
                    <title>Page1 Title</title>
                    <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
                </head>
                <body style="-rave-layout: grid">
                    <h:form binding="#{Page1.form1}" id="form1">
                        <h:panelGrid binding="#{Page1.gridPanel1}" id="gridPanel1" style="left: 96px; top: 48px; position: absolute"/>
                        <f:selectItems binding="#{Page1.radioButtonList1SelectItems1}" id="radioButtonList1SelectItems1"/>
                        <h:commandButton action="#{Page1.button1_action}" binding="#{Page1.button1}" id="button1"
                            style="left: 384px; top: 120px; position: absolute" value="Submit"/>
                        <h:commandButton action="#{Page1.button1_action}" binding="#{Page1.button1}" id="button1" style="left: 384px; top: 72px; position: absolute" value="Submit"/>
                        <h:outputLink binding="#{Page1.hyperlink1}" id="hyperlink1" style="left: 480px; top: 216px; position: absolute" value="http://www.sun.com/jscreator">
                            <h:outputText binding="#{Page1.hyperlink1Text}" id="hyperlink1Text" value="Hyperlink"/>
                        </h:outputLink>
                        <h:commandLink binding="#{Page1.linkAction1}" id="linkAction1" style="left: 456px; top: 264px; position: absolute">
                            <h:outputText binding="#{Page1.linkAction1Text}" id="linkAction1Text" value="Link Action"/>
                        </h:commandLink>
                    </h:form>
                </body>
            </html>
        </f:view>
    </jsp:root>page2 bean
    * Page1.java
    * Created on June 25, 2005, 10:52 AM
    * Copyright user
    package webapplication8;
    import javax.faces.*;
    import com.sun.jsfcl.app.*;
    import com.sun.jsfcl.data.DefaultSelectItemsArray;
    import java.util.Vector;
    import javax.faces.component.UIComponent;
    import javax.faces.component.UISelectItems;
    import javax.faces.component.html.*;
    import javax.faces.context.ExternalContext;
    import javax.faces.context.FacesContext;
    import javax.faces.el.ValueBinding;
    import javax.faces.model.SelectItem;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.http.HttpServletResponse;
    public class Page1 extends AbstractPageBean {
        // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
        private int __placeholder;
        private HtmlForm form1 = new HtmlForm();
        public HtmlForm getForm1() {
            return form1;
        public void setForm1(HtmlForm hf) {
            this.form1 = hf;
        private HtmlPanelGrid gridPanel1 = new HtmlPanelGrid();
        public HtmlPanelGrid getGridPanel1() {
            return gridPanel1;
        public void setGridPanel1(HtmlPanelGrid hpg) {
            this.gridPanel1 = hpg;
        private HtmlCommandButton button1 = new HtmlCommandButton();
        public HtmlCommandButton getButton1() {
            return button1;
        public void setButton1(HtmlCommandButton hcb) {
            this.button1 = hcb;
        private HtmlOutputLink hyperlink1 = new HtmlOutputLink();
        public HtmlOutputLink getHyperlink1() {
            return hyperlink1;
        public void setHyperlink1(HtmlOutputLink hol) {
            this.hyperlink1 = hol;
        private HtmlOutputText hyperlink1Text = new HtmlOutputText();
        public HtmlOutputText getHyperlink1Text() {
            return hyperlink1Text;
        public void setHyperlink1Text(HtmlOutputText hot) {
            this.hyperlink1Text = hot;
        private HtmlCommandLink linkAction1 = new HtmlCommandLink();
        public HtmlCommandLink getLinkAction1() {
            return linkAction1;
        public void setLinkAction1(HtmlCommandLink hcl) {
            this.linkAction1 = hcl;
        private HtmlOutputText linkAction1Text = new HtmlOutputText();
        public HtmlOutputText getLinkAction1Text() {
            return linkAction1Text;
        public void setLinkAction1Text(HtmlOutputText hot) {
            this.linkAction1Text = hot;
        // </editor-fold>
        public Page1() {
            // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
            try {
                ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
                HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
                HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
                String id=req.getParameter("id");
                if(id!=null)
                    getSessionBean1().setId(Integer.parseInt(id));
                if (getSessionBean1().getId()==1) {
                    addTextBox();
                else if (getSessionBean1().getId()==2) {
                    addCheckBox();
                    addRadio();
                else if (getSessionBean1().getId()==3) {
                    addRadio();
                   // addCheckBox();
            } catch (Exception e) {
                log("Page1 Initialization Failure", e);
                throw e instanceof javax.faces.FacesException ? (FacesException) e: new FacesException(e);
            // </editor-fold>
            // Additional user provided initialization code
        protected webapplication8.ApplicationBean1 getApplicationBean1() {
            return (webapplication8.ApplicationBean1)getBean("ApplicationBean1");
        protected webapplication8.SessionBean1 getSessionBean1() {
            return (webapplication8.SessionBean1)getBean("SessionBean1");
         * Bean cleanup.
        protected void afterRenderResponse() {
        private void addRadio() {
            HtmlPanelGrid gridPanel = new HtmlPanelGrid();
            UIComponent parent = gridPanel1;
            HtmlOutputText outputText = new HtmlOutputText();
            outputText.setValue("Some Desc");
            outputText.setId("somedesc2");
            HtmlSelectOneRadio checkBox = new HtmlSelectOneRadio();
            checkBox.setBorder(0);
            checkBox.setLayout("pageDirection");
            checkBox.setId("a3");
            UISelectItems items = new UISelectItems();
            DefaultSelectItemsArray objArray =new DefaultSelectItemsArray();
            vectDefaultSelectItemsArray.add(objArray);
            arrays=(DefaultSelectItemsArray[])vectDefaultSelectItemsArray.toArray(new DefaultSelectItemsArray[vectDefaultSelectItemsArray.size()]);
            int size =arrays.length;
            arrays[size - 1].clear();
            for (int i =0;i<10;i++) {
                arrays[size - 1].add(new SelectItem(""+i+"",""+i));
            // array.setItems(new String[] {"Yes","No" });
            items.setValueBinding("value",getValueBinding("#{Page1.arrays["+(size-1)+"]}"));
            checkBox.getChildren().add(items);
            gridPanel.getChildren().add(outputText);
            gridPanel.getChildren().add(checkBox);
            parent.getChildren().add(gridPanel);
        private void addCheckBox() {
            HtmlPanelGrid gridPanel = new HtmlPanelGrid();
            UIComponent parent = gridPanel1;
            HtmlOutputText outputText = new HtmlOutputText();
            outputText.setValue("Some Desc");
            outputText.setId("somedesc1");
            HtmlSelectManyCheckbox checkBox = new HtmlSelectManyCheckbox();
            checkBox.setBorder(0);
            checkBox.setLayout("pageDirection");
            checkBox.setId("a2");
            UISelectItems items = new UISelectItems();
            DefaultSelectItemsArray objArray =new DefaultSelectItemsArray();
            vectDefaultSelectItemsArray.add(objArray);
            arrays=(DefaultSelectItemsArray[])vectDefaultSelectItemsArray.toArray(new DefaultSelectItemsArray[vectDefaultSelectItemsArray.size()]);
            int size =arrays.length;
            arrays[size - 1].clear();
            for (int i =0;i<10;i++) {
                arrays[size - 1].add(new SelectItem(""+i+"",""+i));
            // array.setItems(new String[] {"Yes","No" });
            items.setValueBinding("value",getValueBinding("#{Page1.arrays["+(size-1)+"]}"));
            checkBox.getChildren().add(items);
            gridPanel.getChildren().add(outputText);
            gridPanel.getChildren().add(checkBox);
            parent.getChildren().add(gridPanel);
        private void addTextBox() {
            HtmlPanelGrid gridPanel = new HtmlPanelGrid();
            UIComponent parent = gridPanel1;
            HtmlOutputText outputText = new HtmlOutputText();
            outputText.setValue("Some Description for Control Text Box");
            outputText.setId("somedesc");
            HtmlInputText textField = new HtmlInputText();
            //  textField.setId("textField_"+control.getId());
            textField.setId("a1");
            HtmlOutputText outputText1 = new HtmlOutputText();
            hyperlink1Text.setValue(" ");
            hyperlink1Text.setStyleClass("bodyText");
            textField.setStyleClass("frmObjects");
            gridPanel.setColumns(3);
            gridPanel.getChildren().add(outputText);
            gridPanel.getChildren().add(hyperlink1Text);
            gridPanel.getChildren().add(textField);
            parent.getChildren().add(gridPanel);
        private DefaultSelectItemsArray array = new DefaultSelectItemsArray();
        public DefaultSelectItemsArray getArray() {
            return array;
        public void setArray(DefaultSelectItemsArray dsia) {
            this.array = dsia;
        private Vector vectDefaultSelectItemsArray = new Vector();
        private DefaultSelectItemsArray[] arrays = new DefaultSelectItemsArray[10];
        public DefaultSelectItemsArray[] getArrays() {
            return arrays;
        public void setArrays(DefaultSelectItemsArray[]dsia) {
            this.arrays = dsia;
        private UISelectItems radioButtonList1SelectItems1 = new UISelectItems();
        public UISelectItems getRadioButtonList1SelectItems1() {
            return radioButtonList1SelectItems1;
        public void setRadioButtonList1SelectItems1(UISelectItems uisi) {
            this.radioButtonList1SelectItems1 = uisi;
        private ValueBinding getValueBinding(String expression) {
            return     FacesContext.getCurrentInstance().getApplication().createValueBinding(expression);
        public String button1_action() {
            // TODO Replace with your code
            return "case1";
    }my navigation.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
                                  "http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
    <faces-config>
        <navigation-rule>
            <from-view-id>/Page2.jsp</from-view-id>
            <navigation-case>
                <from-outcome>case1</from-outcome>
                <to-view-id>/Page1.jsp</to-view-id>
            </navigation-case>
            <navigation-case>
                <from-outcome>case2</from-outcome>
                <to-view-id>/Page1.jsp</to-view-id>
            </navigation-case>
            <navigation-case>
                <from-outcome>case3</from-outcome>
                <to-view-id>/Page1.jsp</to-view-id>
            </navigation-case>
        </navigation-rule>
        <navigation-rule>
            <from-view-id>/Page1.jsp</from-view-id>
            <navigation-case>
                <from-outcome>case1</from-outcome>
                <to-view-id>/Page2.jsp</to-view-id>
            </navigation-case>
        </navigation-rule>
    </faces-config>my managed beans xml
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
                                  "http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
    <faces-config>
        <managed-bean>
            <managed-bean-name>Page1</managed-bean-name>
            <managed-bean-class>webapplication8.Page1</managed-bean-class>
            <managed-bean-scope>request</managed-bean-scope>
        </managed-bean>
        <managed-bean>
            <managed-bean-name>SessionBean1</managed-bean-name>
            <managed-bean-class>webapplication8.SessionBean1</managed-bean-class>
            <managed-bean-scope>session</managed-bean-scope>
        </managed-bean>
        <managed-bean>
            <managed-bean-name>ApplicationBean1</managed-bean-name>
            <managed-bean-class>webapplication8.ApplicationBean1</managed-bean-class>
            <managed-bean-scope>application</managed-bean-scope>
        </managed-bean>
        <managed-bean>
            <managed-bean-name>Page2</managed-bean-name>
            <managed-bean-class>webapplication8.Page2</managed-bean-class>
            <managed-bean-scope>request</managed-bean-scope>
        </managed-bean>
        <managed-bean>
    </faces-config>

  • It is 2013 and has apple sorted out the tax problem for UK residents? Do we still have to have anEIN to publish on ibooksauthor?

    It is 2013 and has Apple sorted out the tax problem for Non US residents publishing on iBooks? Do I still have to get an EIN when I will be selling in UK?

    LaraBland wrote:
    ...  but it continues to tell us we need to enter the passcode.
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps..

  • "Blocked plug-in message" problem on my OS X 10.6.8. (Safari's 5.1.10). Any solutions for a non-techie (step 3 on Adobe Flash's instructions leads to dead end). Thanks.

    "Blocked plug-in message" problem on my OS X 10.6.8 (Safari's 5.1.10). Any solutions for a non-techie (step 3 on Adobe Flash's instructions leads to dead end, i.e. product for sale). Thank you. 

    Prior to updating flash player, you must first uninstall all previous versions.  Make sure you are downloading from the proper Adobe website = Adobe Flash Player Software
    Flash Player Uninstaller
    Repair permissions and restart your computer after the installations.

  • Problem: Adding support for non-english charachter sets in UCCX 8.0

    We have just moved from windows-based UCCX 7.0 to UCCX 8.0, the upgrade process went successfully so far, but for some reasons, Cisco Agents are experiencing problems displaying non-english charachter sets, everything was working fine prior to upgrading to the new version.
    Is there a way to add support for these character sets?
    Thanks in advance.

    Hi Bala,
    Follow the command. I believe that the space is normal.
    This command can take significantly long time,
    and can also effect the system wide IOWAIT on your system.
    Continue (y/n)?y
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/sda6              90G   46G   41G  54% /common
    8.0K    /var/log/inactive/
    admin:
    admin:
    admin:show diskusage activelog
    This command can take significantly long time,
    and can also effect the system wide IOWAIT on your system.
    Continue (y/n)?y
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/sda6              90G   46G   41G  54% /common
    8.0K    /var/log/active/mgetty
    0       /var/log/active/sa
    4.0K    /var/log/active/platform/snmp/sappagt/sappagt.index
    4.0K    /var/log/active/platform/snmp/sappagt/sappagt.log
    4.0K    /var/log/active/platform/snmp/sappagt/startup.txt
    16K     /var/log/active/platform/snmp/sappagt
    4.0K    /var/log/active/platform/snmp/hostagt/hostagt.index
    Thanks,
    Wilson

Maybe you are looking for

  • SD- Sales Order - ATP check not working for few item in same sales order

    Hi Experts, Need help we activated ATP check but for few item i could not find confirmation qty after availability check. In same SO out of 4 items for schedule line it confirming qty for 2 item but  it's not confirming for remaining 2 items though s

  • Getting error when schedule a webi report

    Hi All, I am getting error "Cannot initialize Report Engine server. (Error: RWI 00226) Error: INF) while schedule a Webi report. Could anyone help me regarding the error? Regards

  • Transaction iView - SAP GUI for HTML-blank on some systems

    Hi, I have few transaction iviews - SAP GUI for HTML running perfectly well on few systems. But the same iViews fail to load in few other systems. A blank iview is displayed. What could the problem be? Thanks and Regards, Reena

  • What does could not find layout echo mean

    I am very new/ignorant to Garagdband, I keep trying but coming up with things like this that confound me What does could not find layout Default Echo GB mean, AND, how do I get it back. thank you in advance

  • Navigation option on blank values

    the requirement is I have a report with total count column....when i click on the count a detailed report with all the employee names will open and this count values can have a blank values too so i gave navigation on the headcount column so that whe