Partititon1,2,3 in group ODS,FAC status not change after data redistribute
Hello,
first thanks for your help. By now the db2 data redistribute has been sucessful. but another issue occurs , could you give me some suggestion?
1. run Tcode dbacockpit-->db2 for linux, unix, and windows database > configuration>database partiton group
i found the stutus in db partion group NGRP_FAC_AB7 and NGRP_ODS_AB7 and partion 1,2.3. is partion not in partitioning map containers created. I know if we want to change the status from this to partion in partioning map status , we should do a redistribute.
i have made a redistribute action like this
1. double click what i want to distribute
2. select the relevant partition , for example partition 0001
3 click the execute immediatelly button .
when i finished , the status is not changed . so i change the redistribute log located in /db2/db2ab7/sqllib/redist/ AB7.NGRP_FACT_AB7.2008022808582 .
the log message is
Data Redistribution cannot be continued.
Error: Redistribution failed with SQLCODE=-6047 (rc=-2145779603).
the SQL 6047 detail information is like the following. I don't know what happens.
it's a SAP bug just like the previous issue ? Could you give me some suggestion ? Thanks
db2 => ? sql6047
SQL6047N Database partition group cannot be redistributed
because table "<name>" does not have a partitioning
key.
Explanation:
At least one table in the single-node database partition does not
have a partitioning key. All tables in the single-node database
must have a partitioning key before the database partition group
can be redistributed to a multiple-node database partition
group.
The operation was not performed.
User Response:
Use the ALTER TABLE command to specify partitioning keys for
tables that do not have one. Then try the request again
Before redistribution, do your tables reside on only one partition? Does the error message you get list the table or tables that do not have a partitioning key?
All fact tables, ODS tables and PSA tables are created with a partitioning key in a SAP BI system. However, in the FACT and ODS tablespace, there are a few BI management tables (name starting with 'RS') that do not get a partitioning key by default if created in a tablespace on only one partition. The BI data distribution wizard in the DBA Cockpit takes care of some of these tables, for example RSDMFACTAB and RSDMODSTAB. Maybe there are some additional ones.
Please list the names of the tables without partitioning key. If the error message does not contain them, you can get them with the following SQL statement:
select varchar(tabname,30)
from syscat.tables a
where tbspace='<your_tablespace>'
and not exists (select partkeyseq from syscat.columns b
where a.tabschema=b.tabschema and a.tabname=b.tabname
and b.partkeyseq > 0)
Brigitte
Similar Messages
-
HU status not changing after GR
Hi All,
For a stock transfer order we create outbound delivery and create HU and then do PGI and at the receiving site we do GR via HU in MIGO transaction.
however the status of the HU changes after it is created and after it is PGI ,,, but after doin GR the status does not change.
Please help me with this ,,,
Regards,
Samuelhi,
I am doing GR in MIGO transaction with respect to outbound delivery via HU, I am not creating inbound delivery.
Regards,
Samuel -
The total goods movement status not changed after goods receipt using MIGO
Dear gurus:
when i use T-code MIGO doing goods-receipt against Inbound delivery, the total goods movement status don't changed. i tryed VL32N to do goods receipt, and the status changed.
how can i do to make the status change when i receive goods in MIGO against inbound delivery?
best wishes,
DavidHi,
If your MM is integrated with WM (SU mgt or HUM) you have to post the GR with Inbound delivery.
Amit -
Status Profile : Status not changing in CRM
Hi Gurus
Created order with header status as as " In process" , item status is defaulted to " open" and order replicatd to ECC , billed aswell . But when I checked in CRM still status not changing to completed but retains with In process at header level & open at item level.
I would expect order status should be completed at header level & Item level.
Is there any thing wrong with status profile settings at header & Item level? , I have created status profiles with following settings.
I have copied standard status profile " CRMORDER" and assigned to trasaction type and made following settings:
Under Open : following transactional contorl selected
To be distributed : Selected options "Forbidden " & No active
Under In process:
In process : Selected options " Allowed " & Set
Undo Rejection : Selected options " No infulence " & Set
Under Completed:
Complete : Selected options " Allow " & Set
Created status profile for Item i.e. copied standard CRMORD_i and made following changes:
Under Open : No transaction control selected
Under In Process :
Edit : Seleted options " No influence" & Set
Undo Rejection : Selected options " No Influence & Set
Under Completed:
Completed : Selected options " Allowed & Set"
Rejected : Selected options " Allowed & Set"
Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping Business activity reasons to order reasons in ECC.
Is any thing i am selecting wrong options in status profile at header level & item level? Much appricieated for solution.
Thanks
shashHi Gurus
Created order with header status as as " In process" , item status is defaulted to " open" and order replicatd to ECC , billed aswell . But when I checked in CRM still status not changing to completed but retains with In process at header level & open at item level.
I would expect order status should be completed at header level & Item level.
Is there any thing wrong with status profile settings at header & Item level? , I have created status profiles with following settings.
I have copied standard status profile " CRMORDER" and assigned to trasaction type and made following settings:
Under Open : following transactional contorl selected
To be distributed : Selected options "Forbidden " & No active
Under In process:
In process : Selected options " Allowed " & Set
Undo Rejection : Selected options " No infulence " & Set
Under Completed:
Complete : Selected options " Allow " & Set
Created status profile for Item i.e. copied standard CRMORD_i and made following changes:
Under Open : No transaction control selected
Under In Process :
Edit : Seleted options " No influence" & Set
Undo Rejection : Selected options " No Influence & Set
Under Completed:
Completed : Selected options " Allowed & Set"
Rejected : Selected options " Allowed & Set"
Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping Business activity reasons to order reasons in ECC.
Not sure whether i am selecting wrong options in status profile at header level & item level?
Plz help me on this.
Thanks
shash -
Preference status not changed for the processed products
Hello All,
While Aggregating the vendor declaration, I am getting the message as below
Preference status not changed for the processed products
Could you please help me to resolve this issue.
Thanks & Regards
RahulHello Rahul,
aggregation is not changing status on LTVD. (Possibly LTVD has been already agregated). Newly maintained LTVD is not changing status of the product, its remaining negative whatsoever.
Kr,
Gabriel. -
Service Order status Not Changing From Resloved to Closed status
The service order Status not automatically moving from Resolved to closed after 30days.
Observation
We Revived program Z program ,seems to be fine.
I am set the program in debugging mode for testing the Service orders by reduce the time duraion for staus resolved to closed, am getting the getting the Error Test determination procedure is not evaluated .
Point of dout
1) Is there any relation between Test Determination Procedure and Z program.
2) while am checking for Text Customing for Consistency I found an error Log.
3) While creating Service Order Test field was Mandatory
for that have dout about is there any relation between for this program
Thanks in Advance
Regards
Raju.........Solved ...
BD75 (RBDMOIND ) is T-Code and report name ...
need to schedule ... -
Presence status not changed when using Lync 2010 Remote Call Control
Hello,
I'm currently testing the Remote Call Control functionality of Lync 2010. Call management works fine but I'm surprised that my presence status does not change to "In a Call" when the call is established.
OriginatedEvent, DeliveredEvent and EstablishedEvent are forwarded correctly to Lync Client 2010. All responses are "200 OK".
Is there something more to send to Lync Server 2010 so the status of the Lync Client gets correctly updated to "In a Call" ? Or is a plugin for the Lync Client necessary to achieve this ?
Thank you in advance,
MartinI think there's something missing from your scenario and I don't believe you would need a plugin for this. It's been forever since I've set up RCC with Lync 2010 however. I know this isn't what you're looking for, but I've used this product in
the past to configure Lync and RCC with third party PBXs that don't support Lync/RCC but do have a TAPI interface.
http://www.estos.com/products/drivers-middleware/callcontrolgateway400.html I've been able to get a free trial before and it worked like a charm for an old 3COM phone system. If you can get a trial it might help you compare apples to apples provided
you have a TAPI driver for your PBX.
For more details on what happens behind the scenes, you might have some better luck in the MSDN dev forums:
http://social.msdn.microsoft.com/Forums/en-US/home?category=uc
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Task status not changing in UWL
Task status is not changed in UWL when the task is executed from UWL . workitems transfered from R/3 by executing a workflow .SAP says real time refresh not supports in this UWL version.
please let me know any workaround to solve this issue.
Thanks
Saraththats right.
UWL does not refresh immediately. You need to refresh the UWL again.
As I saw over internet, the Real-time Refresh feature for Universal Worklist is available in SAP NetWeaver 702 SP02 and above, and SAP NetWeaver CE 7.20 SP01 and above.
Thanks
Krishna -
Status not changing to Available after sleep?
Just recently got my wife a MacBook (white). I got her setup with iChat and it's working well except for the status. When she wakes it from sleep, it logs her back into iChat, but keeps a status of "Away". I did change the option in Prefs to "Set me as Available" when coming back or something like that.
What am I doing wrong? Anyone?Hi,
In the General Section of the iChat Preferences you can set one of three option on "Returning to my Computer" which normally refers to Waking from Sleep or coming back from the Screen saver.
One of the options as you say, is to set the Status to Available (If it was set to Away before).
Like you I find it does not work.
I have also tried the sub-options in the Menu Bar Icon bit about Logging out of AIM if I quit (Which Sleep will be considered as the same thing).
Basically I was trying to find if this setting over-rides the lower one.
I Set it to At User Login set my Status to Available which I know works on Start up. But from Sleep this does not over-ride the Status Message when it is set to Away.
If the above setting is not set the same thing happens (it stays as Away when I wake the computer.
Whether I have it set to Set Me as Off Line when I Quit (paraphrased) or not also does not change the Status Message on waking the computer.
Not even turning Off Auto-Reply with Away message made any difference.
That leaves two things.
Does this setting have anything to do with Sleep of Screen Saver ? (is it something else ?)
Is it a bug ?
iChat help has this on Setting the Status.
If you are away from your computer for a time, your status is displayed as “Idle.” Messages that arrive while you’re away wait on your screen
This implies the former. i.e. if you have set the Status as Away and physically leave the computer and the Idle time kicks in before Sleep or Screen Saver then iChat will change you Status to Idle (Although it can not actually display this varient of Idle).
Also there is not setting if I am Idle change my status to Away either.
The Idle time is preset at 600 seconds (10 mins)
My Screen Saver kicks in earlier than this and may over-ride this.
Right this minute I do not have 10 ins to do something else or wait until the Idle time kicks in.
Summary.
This issue seems to be something based on what Away means in this context.
I suggest it refers to the Idle time (which is hidden from your Buddies if you have set Away as the Status).
Hope this helps.
9:56 PM Wednesday; February 18, 2009 -
Sales order status not changed
Even after all line items Delivered and Accounting document cleared, sales order's status is "Being Processed".
SO is still showing open order list in VA05..There are not much changes done in SO...What could be the reason...Just check the customer master in Sales Area data Shipping tab - Partial delivery per item. It should be set as D - No limit to subsequent deliveries. Change it to some other value as per the business requirement, and check with new order. It will not show the status Being Processed.
Master data plays a major role in any such conditions.
Thanks/Sheetal -
SAP support
I am not able to change the IDOC status...
I have also processed the IDOCs many times..
Guidance required...
KamalDear Kamal
Please check your entry in SM12 an delete it and again reprocess it with the help of Tcode Bd87
Thanks
Amit Shivhare -
A/R Invoice Closed but Status not Changed
Hi All,
I have Prepared one A/R Invoice Value of Material, Freight, Taxes.
To reverse this Invocie, I have passed on A/R Credit Memo but still invoice is showing status as Open-Printed.
I have checked JE for both are showing same value.
Can any body help me to solve this problem please.
With Warm Regards,
Chintesh SoniDear Shridharan,
I have updated PL 38 on my laptop for testing.
It is working fine but, in Service Calls, when i am adding activity it is showing error and activity does not getting add.
If i will Add any activity or first activity say for Return mannually. Rest all activity will be added automatically. Due to this problem i m stuck.
Other wise i have tested PL 38 for upgrading.
I have already raised three question to SAP from our S user name and password means from Customer portal with high priority but till date i have not received response.
With Warm Regards.
Chintesh Soni -
Status Not changed in Activity Screen
Helo Experts
In activity screen MORE menu, i have option SET TO COMPLETED. If i click on it then the STATUS textbox should change to COMPLETED (either from OPEN / INPROCESS). But thats not happening..... i have the following code for it. Kindly go through and can let me know whats the problem.
Set to Completed button
ls_button-text = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_UIU_BT_ACTIVITY/SETTOCOMPLETED' ).
ls_button-on_click = 'COMPLETED'.
ls_button-tooltip = ls_button-text.
ls_button-page_id = me->component_id.
if lv_status eq 'E0003'.
ls_button-enabled = abap_false.
else.
ls_button-enabled = abap_true.
endif.
append ls_button to rt_buttons.
clear ls_button.
ls_button-text = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_UIU_BT_ACTIVITY/PDFAFS' ).
ls_button-on_click = 'CREATE_FACT_SHEET'.
ls_button-tooltip = ls_button-text.
ls_button-page_id = me->component_id.
lv_activity_guid = ls_btadminh-guid.
call method cl_crm_uiu_activity_tools=>check_pdfafs_allowed
exporting
iv_activity_guid = lv_activity_guid
iv_pdfafs_create = 'X'
IV_PDFAFS_SAVE =
importing
ev_pdfafs_allowed = lv_pdfafs_allowed
ES_ORDERADM_H =
if lv_pdfafs_allowed eq 'X'.
ls_button-enabled = abap_true.
else.
ls_button-enabled = abap_false.
endif.
append ls_button to rt_buttons.
clear ls_button.
Thanks in advance
Rohan
Hi Experts
Waiting for your Inputs.
Thanks & Regards
Rohan
Edited by: Rohan M on Nov 7, 2008 3:10 PMHi Rohan,
I can suggest you an approach for this. Try the steps below.
1) Move the button definition to the GET_BUTTONS method of the view controller class. Leave the DO_PREPARE_OUTPUT method as clean as possible. Make sure that the event name is in the same case in the button-on_click parameter and the event handler name (you can check the event handler name in DO_HANDLE_EVENT).
2) As you know there would be NEW STATUS dropdown available to change the status. Go to the getter and setter methods of this attribute. From there there should be an BOL Action which will be triggered. This action takes the status which is set. This is the place where the status change mechanism starts.
3) Try to call the same BOL Action in your event handler COMPLETED. If you want to commit the change to the database, you can call the transaction manager class commit method. You can refer SAVE method of your view impl class.
Hope this helps.
Regards,
Vinay -
WAE Disk Status "Not Up To Date"
After an Upgrade Image to 4.1.3b.9, i got this command output:
NO-HOSTNAME#show disks details
Physical disk information:
disk00: Present WD-WCANY3489733 (h02 c00 i00 l00 - Int DAS-SATA)
238472MB(232.9GB)
disk01: Present WD-WCANY3489714 (h02 c00 i01 l00 - Int DAS-SATA)
238472MB(232.9GB)
Mounted file systems:
MOUNT POINT TYPE DEVICE SIZE INUSE FREE USE%
/sw internal /dev/md0 991MB 912MB 79MB 92%
/swstore internal /dev/md1 991MB 459MB 532MB 46%
/state internal /dev/md2 5951MB 168MB 5783MB 2%
/local/local1 SYSFS /dev/md4 11903MB 130MB 11773MB 1%
.../local1/spool PRINTSPOOL /dev/data1/spool 991MB 32MB 959MB 3%
/obj1 CONTENT /dev/data1/obj 101177MB 128MB 101049MB 0%
/dre1 CONTENT /dev/data1/dre 79354MB 128MB 79226MB 0%
/ackq1 internal /dev/data1/ackq 1189MB 32MB 1157MB 2%
/plz1 internal /dev/data1/plz 2379MB 65MB 2314MB 2%
Software RAID devices:
DEVICE NAME TYPE STATUS PHYSICAL DEVICES AND STATUS
/dev/md0 RAID-1 NORMAL OPERATION disk00/00[GOOD] disk01/00[GOOD]
/dev/md1 RAID-1 NORMAL OPERATION disk00/01[GOOD] disk01/01[GOOD]
/dev/md2 RAID-1 REBUILDING disk00/02[GOOD] disk01/02[!!NOT U
P TO DATE!!]
/dev/md3 RAID-1 REBUILDING disk00/03[GOOD] disk01/03[!!NOT U
P TO DATE!!]
/dev/md4 RAID-1 REBUILDING disk00/04[GOOD] disk01/04[!!NOT U
P TO DATE!!]
/dev/md5 RAID-1 REBUILDING disk00/05[GOOD] disk01/05[!!NOT U
P TO DATE!!]
*** NOTE ***
One or more RAID constituent disk partitions appear to be abnormal.
This could be because of
problem in drive's partition(s) and it is being rebuilt
Possible I/O errors on a disk drive
Please run "show alarms critical detail support"
to check any critical disk errors.
RAID-1 volumes will continue to operate on the remaining disk drive.
Please refer to the product documentation for further
information on how to handle this situation.
There are not alarms about disks...
I powered-on the appliances almost 20 mins ago... and this still continuous saying that . Is it normal ?
Best Regards,
Bruno PetrónioARGGGGGGGG....
Ensuring a Successful RAID Pair Rebuild
RAID pairs will rebuild on the next reboot after you use the restore factory-default command, replace or add a hard disk drive, delete disk partitions, or reinstall WAAS from the booted recovery CD-ROM.
Caution You must ensure that all RAID pairs are done rebuilding before you reboot your WAE device. If you reboot while the device is rebuilding, you risk corrupting the file system.
To view the status of the drives and check if the RAID pairs are in "NORMAL OPERATION" or in "REBUILDING" status, use the show disk details command in EXEC mode. When you see that RAID is rebuilding, you must let it complete that rebuild process. This rebuild process may take several hours. ** -
Transfer requirement status not updated after TO confirmation
Hi Experts,
I have an issue with transfer requirement which is not updated with completed status even after Transfer Order completed.
Once TO is completed, relevant TR should be updated with completed status. We have many TR in open status even they are completed.
Could you please help me out how to resolve the issue.
Regards
Gowri SankarHi
You can use the Warehouse activity monitor (LL01) to select the completed TR's and select the d''delivery completed' button and this will get rid of them
I hope that this helps
Frenchy
Maybe you are looking for
-
When I am entering my info for contests or ordering, I don't want to have to type everything. How do I set it so Firefox will remember this and fill it in for me?
-
My itunes is not working its jus closing when i open it pls tell me how to fix this issue
if i install the os will the data in the mac will be earesed
-
How can I add the Happy Birthday widget to my mac?
How can I add the "Happy Birthday" widget to my dashboard?
-
TNS Ora-12532 error When connecting with Db11 running in the VM
I created a virtual machine from the PVM Entrerprise Linux 5 64 bits and db11g. Inside the virtual Machine the sqlplus system/manager1@VDB11 is working well. The tnsping 172.20.0.33 is working well too. But from the other external machine using oracl
-
Adobe Design Standard in CC?
Hi Adobe, First, I want say "big thanks" for yours softwares, support and lots of innovations for digital artists. For many years I used only Adobe Design Standard (Photoshop, Illustrator and Indesign). My question is: Will Adobe prepare only this pr