Partner claiming no certificate attached in SOAP call

Having a weird situation here. Trying to send an outbound SOAP call to a 3rd party. They claim that the reason we continue to get forbidden error is because there are no certificates attached with the message. We are reaching their server so it's not a firewall issue.
I have setup the receiver SOAP adapter and tried specifying the client authentication by choosing the private key that's in the key store in Visual Admin.
Ive also tried selecting web services security and configuring the receiver agreement. In the logs I continue to see the below message.
"Attempting to create outgoing ssl connection without trusted certificates"
This seems to back up what the partner is saying. Why would this occur?

This scenario is slightly different. All certificates are loaded in the keystore.
In order to authenticate thru their gateway, we provided them with our public key. We then need to use that public key when sending the message. Slightly different from the normal way this works but it shouldnt make a difference as long as we select the right cert in the ID.
I confirmed in the logs it's trying to load the keystore view and entry I specify, yet they still don't see any certificate in the request. I can't seem to verify this on my own as I can't see what's actually being sent to them.
Another thing I noticed is that the selection help in the receiver soap adapter only lists the private key entries vs the public key entries. You have to manually type in the right entry.

Similar Messages

Error in SOAP call with certificate

Hello experts!
I am developing an interface RFC --> SOAP
This SOAP call is for an external system and my basis team set up a certificate into visual adm in order to be able to communicate with my external partner.
I set up this certificate into my communication channel (key store entry).
When this interface is executed I get the following error:
com.sap.aii.af.ra.ms.api.DeliveryException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: No service was found matching the request
Does anyone know what is happening?
Best regards,
Diego.

Hi guys,
We have built another scenario to connect to a public web service (without certificates) and it connects properly. In other words the XI machine has access to the internet. Both scenarios are being authenticated in the company proxy. That's why it may not be a firewall issue.
I've imported the wsdl file into the SoapUI (software to test web services) and I am getting the same error. But when I am trying to execute this test from outside of my company I getting a different error, as follows:
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
   <soap:Body>
      <soap:Fault>
         <faultcode>soap:Client</faultcode>
         <faultstring>Validation Error</faultstring>
         <faultactor>internal-firewall</faultactor>
         <detail xmlns:det="http://reactivity.com/">
            <det:detailmessage>The message was found to be invalid.</det:detailmessage>
         </detail>
      </soap:Fault>
   </soap:Body>
</soap:Envelope>
I believe this can be an error of data itself. I am trying to check it with the external partner.
What do all of you think about it?
Best Regards,
Diego.

SOAP call with attachment from ABAP

Dear ABAP guru's
We have a requirement to trigger a SOAP call from the ABAP stack. We have used the instructions from SAP as specified in the SAP help as specified in this link:
http://help.sap.com/saphelp_47x200/helpdata/en/2d/64d029e74911d6b2e400508b6b8a93/frameset.htm
This works fine. However, we would like to send an attachment with the call and don't see a method available for this. Is there anybody who knows how to achieve this?
Thanks a lot in advance,
Rudy Claassen

Dear ABAP guru's
We have a requirement to trigger a SOAP call from the ABAP stack. We have used the instructions from SAP as specified in the SAP help as specified in this link:
http://help.sap.com/saphelp_47x200/helpdata/en/2d/64d029e74911d6b2e400508b6b8a93/frameset.htm
This works fine. However, we would like to send an attachment with the call and don't see a method available for this. Is there anybody who knows how to achieve this?
Thanks a lot in advance,
Rudy Claassen

How to Send Multiple Attachment by SOAP Adapter

Hi,
How to send multiple attachment by SOAP Adapter.
I am able to send single attachment but at the time of sending multiple attachment i am not able to see in SXMB_moni.
Regards,
Anurag

On the communication channel, please check the 'Do Not Use SOAP envelope' option. Also, please, add the "nosoap" attribute to the SOAP adapter caller. Check the note below for more information
#856597 FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter
> "How does the nosoap mode work for the SOAP sender adapter?"

Sending out a PDF as an attachment to a calling application via PI

Hi folks,
I have a Sync scenario:
SOAP<->PI<->ECC
An application makes a soap call to PI makes the same to ECC.
ECC responds with a PDF(Binary) in the reponse payload, PI will need to extract this and put it out in an attachment.
Has anyone worked on this scenario? Can you please give me your guidance and inputs?
Appreciate your help!
Hank

Hi,
this is very easy just have a look at my blog:
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
just pass the proxy reponse to soap and you're done
Regards,
Michal Krawczyk

SOAP Call to SAP RFC

Hi,
I have a scenario in which I am calling a RFC from SOAP client. RFC has been exposed as a web service. The RFC takes a table parameter. The Table param is Not Optional.
Everything works fine except when I try to send an invalid value in the Export Param to the RFC. The SOAP Call Fails and I get a fault Message.
If there is an invalid value in the Export Param the Table Parameter is Null. So is that the reason why the SOAP call fails??
Any help regarding this would be appreciate. Tried searching OSS but could not find anything on this.
Here is the Fault Message:
<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
<SOAP:Body>
    <SOAP:Fault>
      <faultcode>SOAP:Server</faultcode>
      <faultstring>failed to call the adapter engine</faultstring>
      <detail>
        <s:SystemError xmlns:s='http://sap.com/xi/WebService/xi2.0'>
          <context>XIAdapter</context>
          <code>DeliveryException</code>
          <text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
     at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:697)
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process(ModuleLocalLocalObjectImpl3.java:103)
     at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java(Compiled Code))
     at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process(ModuleProcessorLocalLocalObjectImpl0.java(Compiled Code))
     at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:513)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code))
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code))
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code))
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Caused by: com.sap.aii.messaging.srt.BubbleException: failed to call the adapter engine [null "null"]; nested exception caused by: com.sap.aii.af.ra.ms.api.DeliveryException: Application:EXCEPTION_DURING_EXECUTE:
     at com.sap.aii.af.mp.soap.ejb.AFCallerApplication.perform(AFCallerApplication.java:122)
     at com.sap.aii.messaging.srt.ApplicationBubble.onMessage(ApplicationBubble.java:29)
     at com.sap.aii.messaging.srt.ExtensionBubble.onMessage(ExtensionBubble.java:56)
     at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:576)
     ... 21 more
Caused by: com.sap.aii.af.ra.ms.api.DeliveryException: Application:EXCEPTION_DURING_EXECUTE:
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java(Compiled Code))
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:123)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java(Compiled Code))
     at com.sap.engine.frame.core.thread.Task.run(Task.java(Compiled Code))
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java(Compiled Code))
          ]]></text>
        </s:SystemError>
      </detail>
    </SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Thanks
Ashish

Hi Ashish,
Were you able to resolve this problem? I am facing a similar situation.
After doing all the steps necessary when I try to send a request to the soap_sender channel I get a message unable to post:error 500
ANy help would be appreciated.
Thanks

Can I use SOAP calls to remotely access functions on a SOAP server?

Hi,
I've used JavaScript and SOAP with "regular Acrobat" (e.g. Acroforms) to connect to a SOAP server, followed by Acrobat automatically setting up functions that I can call from JavaScript that, courtesy of SOAP, are relayed to the SOAP server for execution. For example, a SOAP server that implements a Temperature function. After doing the Net.SOAP.connect, my JavaScript magically has access to the Temperature() function, which is then executed remotely on the SOAP server courtesy of SOAP protocol.
My question is: With Livecycle Designer and it's XFA-based forms, do I have the same ability to programmatically connect to a SOAP server and automatically have JavaScript functions set up that I can call on the server? From what I've read, there are LC Submit and Execute operations which interact (e.g. exchange data) with a specified SOAP server, but it isn't clear that LC provides the ability to end up with a set of functions that I can call from my JavaScript that are then executed on the SOAP server.
Stated more simply: Does LiveCycle Designer have the ability to connect to a SOAP server and automatically set up JavaScript functions that I can call (that then get relayed to the SOAP server for execution, followed by the return of data to my XFA-based program)?
Thanks.
Dave

Hi Varma_LC and pguerett,
First, thank you both for your quick responses! It sounds like I shouldn't have any trouble using XFA forms and SOAP together.
Let me ask a related question (not about LiveCycle & SOAP, but just about SOAP). I'm trying to return two values from one SOAP call. http://www.avoka.com/blog/?p=998&cpage=1#comment-1692 describes how to do this. Unfortunately, it's not working for me.
I'm able to retrieve single values from my SOAP server just fine. When I try to return two values, the Acrobat JavaScript debugger says both values are "UNDEFINED". The key part of my code is:
   var IntValue =   // define an int
     soapType: "xsd:int",
     soapValue: "1"
   var NValue =
       n1: IntValue // n1 is the parameter my SOAP server expects
   var GetTheData = service.GetAllData(NValue); // Go get the data and populate the GetTheData object
   console.println("GetTheData = " + GetTheData.CmdError + GetTheData.CmdResults);
   Param_1V.value = GetTheData.CmdError;     // This is a text box to display the returned value
   Param_2V.value = GetTheData.CmdResults; // This is also a text box to display the returned value
Both the console.println & the two text boxes (beginning with Param) print out the same results, namely "UNDEFINED".
I ran my SOAP client and SOAP server on two different computers, and then used WireShark to look at the SOAP protocol. The SOAP protocol looks fine, and contains CmdError and CmdResults XML opening/closing tags around the actual data I'm trying to read from the SOAP server. Plus there are GetAllDataResponse and GetAllDataResult XML opening/closing tags around the data XML tags.
I'm using Acrobat 9 and I developed my SOAP server using Windows Communication Foundation (WCF) 3.5. The same JavaScript program that is unable to retrieve two values returns one value just fine (a different service... call, of course). In other words, it's being done in one program, not two separate programs. So, my singular Net.SOAP.connect call seems to be working fine.
When I do the Net.SOAP.connect, I display the returned services, and GetAllData is listed, so Acrobat JavaScript knows about this particular service.
BTW, the WCF built-in client works fine in retrieving/displaying the two returned values, correctly detecting and displaying both returned values. Of course, the WCF client may have different "rules" than Acrobat has in terms of processing SOAP messages. I've seen differences before between the WCF client and Acrobat.
Any insights either of you have or anyone else has would be *greatly* appreciated. I've never used try/catch to trap JavaScript errors, if there is some type of error I should logically be looking for, I would be interested in information on that as well.
Thanks!
Dave

Launch batch job thru SOAP call : no execution, connection OK.

Hello,
I am experiencing some problems launching batch jobs thru Web Services. I have added batch job "EPN_Test_Webservices" to the Web Services and enabled the Job Attributes.
When I try to launch the job thru a SOAP call, I get a reply but the job is not executed.
This is the SOAP envelope:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Body>
          <m:EPN_Test_Webservices_Job xmlns:m="http://www.businessobjects.com/DataIntegrator/ServerX.xsd">
               <job_parameters>
                    <job_system_profile>String</job_system_profile>
                    <sampling_rate>10</sampling_rate>
                    <auditing>true</auditing>
                    <recovery>true</recovery>
                    <job_server>JS_ict</job_server>
                    <trace>String</trace>
               </job_parameters>
          </m:EPN_Test_Webservices_Job>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
This is the reply I get:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <soapenv:Body>
          <BatchJobResponse>
               <pid>3888</pid>
               <cid>13</cid>
          </BatchJobResponse>
     </soapenv:Body>
</soapenv:Envelope>
When I use the "ping" operation I get the following reply:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <soapenv:Body>
          <pingVersion>
               <version>Business Objects Data Integrator Version 11.7.2.0</version>
          </pingVersion>
     </soapenv:Body>
</soapenv:Envelope>
...which indicates the connection works. Also the "processed counter" increases, but the job does not get executed. There is nothing in the job log, there is no result (the job is supposed to write a record in a database table). What can be wrong?

If I run the following (on the machine I'm trying to set up the share)
smbclient -L localhost -U%
I got the following output
Connection to localhost failed (Error NT_STATUS_CONNECTION_REFUSED)
so I thought it might be something incorrect with the iptables side of things, however I haven't really touched that at all and it seems to look correct
iptables -nvL
Chain INPUT (policy ACCEPT 667 packets, 79977 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 157 packets, 20724 bytes)
pkts bytes target prot opt in out source destination
So from my (very little) knowledge this appears correct (I think)... However it appears that something is blocking access somewhere.

SOAP Receiver adapter error. SOAP CALL Failed

Hi ,
I am implementing scenario R/3->RFC adapter->XI->SOAP REceiver adapter->Web Service (Synchronous). I am getting the error.
SOAP: call failed
SOAP: error occured: java.net.ConnectException: Connection timed out
Message log is as below.
Any clue ?
Thanks & Regards,
Mathew
2005-10-31 18:59:58
Success
output
1130810398454
The message was successfully received by the messaging system. Profile: XI URL: http://host:Port/MessagingSystem/receive/AFW/XI
2005-10-31 18:59:58
Success
output
1130810398458
Using connection AFW. Trying to put the message into the request queue.
2005-10-31 18:59:58
Success
output
1130810398458
Message successfully put into the queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message was successfully retrieved from the request queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message status set to DLNG.
2005-10-31 18:59:58
Success
output
1130810398460
Delivering to channel: CC_CALCULATOR
2005-10-31 18:59:58
Success
output
1130810398564
SOAP: request message entering the adapter
2005-10-31 19:03:07
Success
output
1130810587497
SOAP: call failed
2005-10-31 19:03:07
Error
output
1130810587497
SOAP: error occured: java.net.ConnectException: Connection timed out
2005-10-31 19:03:07
Error
output
1130810587498
Exception caught by adapter framework: Connection timed out

Hi Mathew,
Check if the webservice is availble??? Based on the error below, it looks like the message is timing out at the Adapter Engine level waiting for the connection to make the webservice call...
Prasad

** SOAP to SOAP call - HTTP 404 not found - invalid content type

Hi friends,
We have one scenario SOAP to SOAP call. It is synchronous interface. We are calling the WSDL.
For some of the messages (not all), we are getting the error in SXMB_MONI
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found
In the sender & receiver SOAP communication channel also, same error : SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found
Friends, this error is not coming for all messages. For some of the messages it is coming. For example,
10:50 - Message Processed Successfully
10:54 - Message Processed Successfully
10:59 - Error
11:05 - Message Processed Successfully
By looking threads and blogs, I implemented MessagesTransformBean in the receiver CC and added the parameter Transform.ContentType as 'text/xml;charset=utf-8'.
After implementing this also, error is coming for some of the messages.
Can you kindly clarify friends, what could be the problem?
Kind regards,
Jegathees P.

I'm in agreement with Stefan...
If the problem is intermittent then the system is overloaded at certain times. You would probably need to do some JVM analysis to see the resource usage & look at increasing the memory.
Regards, Trevor

Synchronous SOAP call from XI without BPM....

Hi All,
Is it possible to use the (File - XI - SOAP) Synchronous SOAP call from XI with out BPM. to trace the error messages. If yes then how it can be achived in XI.
Thanks,
Jane

Hi,
You will get either a system error/application error raised if there is a problem processing the SOAP request without the need for BPM.
You can then raise an alert from the RWB if this occurs.
If all is OK with processing, you will get the standard chequered flag.
Cheers
Colin.

SOAP: call failed: java.lang.NullPointerException

Hi,
We are geeting the error in RWB -->
SOAP: call failed: java.lang.NullPointerException
We checked the communication channel and interface and all are working fine.
Can anybody suggest?
Regards,
Akki..................

Hi,
use this link to find the answer..
SOAP adapter
Regards,
Amitanshu

SOAP: call failed: java.io.IOException: unable to create a socket ??

Hi
I am getting the following error in PI for one of my sync interfaces.
SOAP: call failed: java.io.IOException: unable to create a socket
The interface works most of the time, but i get this error couple of times a day.
Regards,
XIer

Hav you able to resolve this issue? Please let me know what was cause of this "unable to create a socket"
Thanks,
Sagar

Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK

Hi PI gurus,
Need some suggestions on one issue below -
Scenario - proxy (SAP) to SOAP (Web based system)
In the RWB Communication Channel Monitirong we are receiving the below error
" Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK"
the request from XI system is going to target system and printing the lables (as per the functionality) with no issues but the comminication channel is giving the above error and this is causing the repeated sending the same request to target sytem and the data is printing repeateadly. This issues is occuring in Quality environment.
Strangley the same Interface with the same connectivity details is working fine in Development environment. But not working in Quality environment. Checked the firewalls settings on both in XI and Target system side and confirmed that everything is fine.
Below are the Logs both from Quality and developement are as follows
Quality ( Failure Case)
17.03.2011 07:19:59 Success SOAP: request message entering the adapter with user J2EE_GUEST
17.03.2011 07:25:03 Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK
Development (Success ful)
17.03.2011 07:27:55 Success SOAP: request message entering the adapter with user J2EE_GUEST
17.03.2011 07:27:58 Success SOAP: completed the processing
When we checked with basis team on user id J2EE_GUEST, they confirmed that they are same in Development and Quality.
I repeat,, that the same target url and everthing is same in XI Configuration
Thanks in Advance. Points would be rewared for the best solution.
Thanks,
Jitender

HI Jitender,
If your scenariois working in DEV and if it is not working in QAS.Could you please check if both the systems are at same patch levels..
Please refer below notes :1551161,817894,952402.
Cheers!!!
Naveen.

Flash Builder 4.5 SOAP call for images using Base64 Encoding

I am trying to load some image meta data in a flash builder mobile application by making a SOAP call to .Net service. I am able to test the web service successfully using a .Net console application. However when I make the call from flash builder mobile client I get a null result. What am I doing wrong? I am using SOAP 1.1 ByteArray didn't work for Flash builder. So converted the ByteArray to Base64 format and tried to obtain result that way. Both ways worked from a .Net Client but not working from Flash mobile.
Here is the code
<fx:Script>
        <![CDATA[
            import mx.graphics.ImageSnapshot;
            import mx.graphics.codec.JPEGEncoder;
            import mx.graphics.codec.PNGEncoder;
            import mx.rpc.AsyncToken;
            import mx.utils.Base64Encoder;
            import services.exifimagemetadata1.ExifImageMetaData1;
            import spark.components.Image;
            public var metaData:ExifImageMetaData1 = new ExifImageMetaData1();
            public var imageBytes:ByteArray = new ByteArray();
            public var gpsData:String;
    private function getBase64EncodedImage():String
                var myEncoder:Base64Encoder = new Base64Encoder();
                myEncoder.encodeBytes(getImageBytes());
                var image64BitText:String = myEncoder.toString();
                return image64BitText;
    public function GetMetaDataFromExif():void{
                var imageToken:AsyncToken = metaData.GetExifBase64Data(getBase64EncodedImage());
                gpsData = imageToken.result.toString();
                metaResult.text = gpsData;
    protected function GetImageMetaDataFromExif(event:MouseEvent):void
                GetMetaDataFromExif();
        ]]>
    </fx:Script>
<s:layout>
        <s:VerticalLayout>
        </s:VerticalLayout>
    </s:layout>
    <s:HGroup>
        <s:Image id="test" width="130" height="140" source="@Embed(source='assets/p1000106.jpg')"/>
    </s:HGroup>
    <s:HGroup>
    <s:Label width="100" height="140" backgroundColor="Blue" click="GetImageMetaDataFromExif(event)">
        <s:text/>
    </s:Label>
    </s:HGroup>
    <s:HGroup>
        <s:Label id="metaResult" width="200" height="140" backgroundColor="yellow"/>
    </s:HGroup>

Hello everyone -
Since I last posted an interesting update happened. I tested my Flex application again, it is calling a Jetty Server that returns a JSON object, in different BROWSERS. I disabled HTTPS for now, and the crossdomain.xml policy file is wide open for testing (ie. allowing every request to return data). So the app accessing the data using HTTP only. Browsers - IE, Opera, Firefox and Chrome. Each browser contained the SAME application, revision of the Flash Player (10.3.183.10 debugger for firefox, chrome, opera, safari PC; 11.0.1.129 consumer version in IE9,) take a look at the screen shot (safari not shown although the result was the same as IE and chrome)
Note that Opera and Firefox returned successful values (i.e. successful JSON objects) using the same code generated from the Data Services Wizard. Chrome, IE and, Safari failed with an Internal error. So I am left wondering - WHY? Is it something with the Flash Player? the Browsers? the Flex SDK? Any thoughts are appreciated. Again, the code is found in the original thread above.

Partner claiming no certificate attached in SOAP call

Similar Messages

Maybe you are looking for