Partner determination functions are not determine in sales order

Dear Sap Gurus,
I have made a new partner function (P2) and have been configure it in partner determination procedure, although i hv made new customer master for the same account group. All th partner function are showing in the customer master data but these are not determine in sales order, one error is coming...this partner procedure is not defined.......kindly give me advide how to resolve this problem.
Regards
Parul Deshwal

Hi
Have you assigned the Partner determination procedure to your sales document type?
Also have you assigned the Partner function to your Partner determination procedure.
Also do the same to the sales order item partner determination
regards
Prashanth

Similar Messages

Plant & Duties are not flowing in Sale Order

Dear experts,
i have an issue in CIN.when i am creating a sales order, plant is not determining automatically,when i am trying to enter plant manually in line item the excise duties are not determining in pricing procedure even though i have maintain condition records for combination of Plant&Control code.(i have maintained control code in material master also) Please reply.
Message was edited by: G Lakshmipathi
Make use of the subject effectively

First have you searched SCN as to how a plant would be determined in a sale order? If not, search and close that issue. Now coming to excise duties, since you entered the plant manually, you also need to click the Update button in condition tab and again double click on "G". Once plant flows automatically, then this issue would also be addressed. If not, post here.
G. Lakshmipathi

Both Credit Limit and L/C are not working in Sales Order

Dear All,
We are working on Export scenario where order are created based on L/C and Credit Limit. In my scenario both credit Limit and L/C check is not happening please suggest.
I have created a sales order with value is 1024.00 INR. (My Credit Price is 1024.00 INR)
Customer credit Limit is 50.00 INR. (In FD32)
My L/C value is 1000.00 INR (In VX11N).
I have Implemented Dynamic Check and Assigned L/C to Sales Order. During Order process system blocking the order through Dynamic check. As per the above value System should not block the order. But System blocking the order. When I check Header -> Billing -> Financial Document Log, System showing the value update error. Its comparing entire Netvalue of the Order(1024) with L/C value (1000). How it is possible.
My requirement is system should consider both Credit Limit and L/C value. Please suggest.
Thansk & Regards

No reply received from any body. But there is limit to post the questions to post another one. I am closing this.
Thanks & Regards

Conditions are not editable in sales order

Dear Friends,
Could you tell the reason - Conditions are neither editable nor you can insert a conditin in sales order line item as the insert icon is inactive.
Thanks & regards
Pinky

Please find my underlined reply
Could be either of the 3
1. Item category would not be allowed for pricing - it is ok
2. Check if the item is rejected or - not rejected
3. Check if invoice is created - invoice not created, this is the time if i am going to create/change the sales order
Hi,
The only reason for this is because this order has subsequent documents. - No subsequent documents
Goto VA03.
Nothing allowed
Complete pricing lines are gray. I have so many manyal conditions
Thanks for the response

HOW TO BLOCK DELIVERY OF GOODS WHICH ARE NOT EQUAL TO SALES ORDER

Hi,
I want to block user to create any sales invoice for some customers based on sales order where quantity in sales order is not equal to invoice.
Thanks,
Anitha

Hi Anitha,
You can do this by selecting check marks on two field under BP Master data >>Payment Terms
1) Allow Partial Delivery of Sales Order
2) Allow Partial Delivery per row.
Thanks,
Regards,
Sudhir

Values of AED and SED are not flowing to Sales Order

Dear Gurus,
We are using ECC 6 and TAXINJ. We did all the CIN configurations to the best of my knowledge. JMOD is flowing normally. But AED & SED are not. UTXJ is coming as also JIN6 (VAT), E Cess and S&HECess. We dont have Cess in the client's company, so Cess is not to be considered.
If a check list can be given, maybe I can check my customization with it, since I am an SD consultant and alot of things are involving MM too. Unfortunately we dont have any MM guy with us for the time being.
Any answers are most welcome.
Thanks and regards.
Venkat - Hyd.

Sure will, but I think it is OK. Still plz do guide me. Here it is as best as I could. Plz do suggest how to attach a doc for this forum if that's possible.
StepCTypFromToManMdtStatSubToReqtAltCTyAltCBV--ActKy
11---PR00XA2--
ERL
100-GrVal11----9912--
300-UTXJ-11--352--351--
350-JMOD-100X---D355--
360-B.Pr-100---299X--
400-JEX2-350----
     X2353--
EXD-
450-JAED350--XG366--
460--360400X--
500-JEXA450--X5353--
EXD-
510--400450X--
520-JSED350--XF360--
525--510-520--X--
540-JEXS-520--X4     353--
EXD-
615-JECS525--X366--
617-JECX615--X353--
EXS-
618-JA1X-525--X     366--
619-JA1Y-618--X353EXS
620--525X--
625--617-618--X--
630--620-625--X--
650-JCES100--190X367--
660-JCED-650--X353--
765--JIN611X10--901--
JN6-
800--100X--
810--765800X--
940-VPRSX---B4--
Regards.
Venkat - Hyd

Pros and Cons not determining / having a Delivery Plant in Sales Order?

Hi Mates
Here I have come-up with one more (weired?) requirement from my client.
We have two plants manufacturing same product and supplying to all customers (some time in same sales order with two different line items).
At the timeof creating a sales order, marketing does't know from which plant the material will move and hence they don't want to fill the Delivering Plant field (VBRP-BUKRS at Shipping tab) for each Item.
They are insisting me to map it as above though I had explained about various pros and cons for not determining a mandatory delivery plant
in sales order like the requirements and shipping stuff.
Yet, yet they want this.
Has anyone come across this kind of requirement before? What best you had done for that?
Can I ask you what are the Pros and cons on not having a Delivery Plant at Sales Order level?
what if I could determine it Delivery level?
Any comments, suggestions, replies and advices are taken humbly.
Cheers
Ajay Kumar Veeranki

Dear Mahulenka
Thanks a lot for the reply. It do have helped me.
Yest it is VBAP-WERKS (typo error ).
Infact I had given the same solution for the issue.
Interstingly, they are insisting on a better solution fit for their requirement. Anyway shall 'highlight' the points again to them try to get it solved
Just wondering has anyone faced the same situation before.
Thanks again for the reply and good luck
Best Regards
Ajay Kumar Veeranki

Business area not determined for line item?

Hello All,
I am trying to create a sales order. When I enter a line item and enter plant for the item, it gives me an error "Business area not determined for the line item #" and it does not accept the item.
I have already checked in the enterprise structure in IMG that the business area is defined and assigned for this plant.
Is there anything else need to be done? Do we have to define or assign the business area in material master?
I would appreciate if somebody can answer.
Thanks.

There are three rules for determining a business area:
o   Rule 1: plant and division
o   Rule 2: for each sales area
o   Rule 3: for each plant and item division
See what you are missing

Partner Function "Vendor" missing when the sales order is replicated to ECC

Hi Gurus,
We are facing a problem on replication of functions partners between
sales order of CRM and ECC.
We have downloaded vendors (partners of table LFA1) from ECC to CRM
following note 883162 and this replication was ok!
We have mapped all partner functions from ECC to CRM and from CRM to
ECC for distribution of partners between systems.
We must include a vendor using partner function '0000092 - Carrier' on
our sales order, which is transferred to ECC. However, when the sales
order is transfered to ECC, the vendor (which was included on CRM) is
missing.
When the sales order is created on ECC and the partner (type carrier)
is included in, the order arrives on CRM missing only the partner
number, because the partner function is there.
How to fix this problem?
Best Regards,
Nivea Faria

Hi,
See this Note : 975195
Hope this helps.
Best Regards
Shiven

How the system determines the Requirement type for one sales order

Hi,
SAP-SD Gurus,
Please tell me how the system determines the Requirement type for one sales order?
Thanks & Regards,
Sreenivas.P

Hi,
System follows some search criterial to determine the requirement type
1. First, an attempt is made to find a requirements type using the strategy group in the material master.
2. If the strategy group has not been maintained, the system will determine it using the MRP group.
3. If the MRP group has not been defined, the system uses the material type instead of the MRP group when accessing the corresponding control tables.
4. If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the item category and the MRP type.
5. If this is not possible, a last attempt is made to find a requirements type with the item category only.
6. If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
Please check the path
SPRO->SALES & DISTRIBUTIONS->BASIC FUNCTIONS>AVAILABILITY CHECK AND TOR->TRANSFER OF REQUIREMENTS--->DETERMINATION OF REQUIREMENT TYPE USING TRANSACTION.
Hope it will clarify
regards,
santosh

My functions are not showing up on my screen

Hi I am not exactly sure how to describe this, I just installed cs6 and my functions are not showing up on my live preview. I have never seen anything like this before.
here is my file, I have filled it in hot pink. This is how it shows up in the layer panel, bridge and in my explorer.
here is a screen shot of what I see on my screen. If you look closely, I wrote "test" and it shows up in the layer panel but still nothing but a transparent background shows up on my live preview
Please tell me how to fix this issue!!!

Pictures from where?

Functional area and cost of sales accounting (company code 2000) active

Hi There!
I hope someone can help.
In our sandbox system, whenever I try to convert a Purchase requistion into a Purchase Order I get the following error message : "Functional area and cost of sales accounting (company code 2000) active".
Anyone know how I can resolve this issue?
Kind regards,
Karl

Hi,
Double click on the error message & check the message Number..
Then go to
Spro>MM>Pur
Attributes of system messages & change the Message from Error to Warning..
Thx
Raju

Time series functions are not working for fragmented logical table sources?

If i remove that fragmented logical table sources, then its working fine.
if any body know the reason, please let me know.
thanks and regards,
krishna

Hi,
is because the time series function are not supported for the framentation content, see the content of the oracle support:
The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
Regards,
Gianluca

AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

How to determine via SQL who created the sales order

Hello I am trying to determine via SQL who created the Sales Order. I'm looking at the ADOC table but having a hard time determining which record points to the sales order creation.

Hi Jimmy,
Try this:
select
     T0.[DocNum], T2.[DocDate], T2.[CardCode], T2.[CardName],
     T1.U_NAME as [User Name], T2.UpdateDate as [Cancelled Date]
from
     ORDR T0
     inner join OUSR T1 on T0.UserSign = T1.UserID
     inner join ADOC T2 on T0.DocNum = T2.DocNum
where
     T2.LogInstanc = (select min(LogInstanc) from ADOC T3 where T3.ObjType = 17 and T3.DocNum = T0.DocNum and T3.CANCELED = 'Y')
     and T2.CANCELED = 'Y'
     and T2.ObjType = 17
group by
     T0.DocNum, T2.DocDate, T2.CardCode, T2.CardName, T1.U_NAME, T2.UpdateDate
Kind Regards,
Owen

Partner determination functions are not determine in sales order

Similar Messages

Maybe you are looking for