Partner Determination Not Working in Opportunity

Hi,
We are using Z-partner Functions Which are Determined using Partner Determination Procedure in Lead but it is not Copied to opprtunity.
we used Different partner procedure for opportunity but is not coping from Lead. We tried to Modify the partner Procedure used for Lead and use it for Opportunity but it is not working.
can any one suggest were we might be going wrong.
With regards,
Selvam t

Hello Selvam,
there is no copy procedure during partner determination. If you create a followup doc or copy an existing document - the partner det. runs again. According to your settings in the PDP the partner are determined by access sequence and source. That means if you want partners which should be copied from predecessor then you should use the source COM_PARTNER_A like i.e. access sequence 0001 in standard.
I hope this help,
Regards
Rene

Similar Messages

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

Sales Order - Output determination not working

Dear Friends,
Greetings!
I have a strange problem,
Order Acknowledgement is to be emailed out automatically on meeting requirement 902 on order save. It goes out to customer (Output: ZBAC: Partner SP: Customer copy different layout), and commissioned agents (Output: ZEC1 to ZEC5, upto 5 partners: C1 to C5, Rep copy layout). Customer copy - ZBAC works fine, but ZEC1-ZEC5 rep copy output does not appear at all.
here is output analysis for ZEC1 and ZEC2:
ZEC1 529 No condition access - if desired, please set in Customizing
ZEC1 562 This output is not defined for Customer 0001010059
ZEC2 529 No condition access - if desired, please set in Customizing
ZEC2 562 This output is not defined for Customer 0001010059
All output types use same access Sequence as below:
1 5 Sales Organization/Order Type 0
2 13 Sales Org. 0
3 7 Order Type 0
Sample Output Procedure, using requirement 902
2 1 ZBAR Ord Conf. - Rep copy 902 >>> Rep copy, I originally thought would be possible to create 5 condition records with partners C1 to C5; but
3 1 ZBAC Ord Conf. - Customer 902 >>> Customer copy
930 1 ZEC1 eMail Partner C1 902 >>> Rep copy should go to partner C1
931 2 ZEC2 eMail Partner C2 902 >>> Rep copy should go to partner C2
932 3 ZEC3 eMail Partner C3 902 >>> Rep copy should go to partner C3
933 4 ZEC4 eMail Partner C4 902 >>> Rep copy should go to partner C4
934 5 ZEC5 eMail Partner C5 902 >>> Rep copy should go to partner C5
VV12 Output record for ZEC1: by Order Type
ZOR Sales Order C1 5 4 EN
ZOR Sales Order C2 5 4 EN
VV12 Output record for ZBAC: by Sales Org
3000 Rochester Operations SP 5 4 EN
>>> C1 and C2, SP Partner does not get description, when I click F4 then SAP throws following message: Possible entries only for mail addresses and PD Org objects Message no. VN341
Appreciate your feedback, let me know if any additional information required.
thank you,
Hetal

check in NACO transaction is you have assigned access sequence to your ZEC* output ytpes and if you have ticked checkbox "Access to output conditions" - otherwise it will not even try to access condition records.
From help :
Access to output conditions
Indicates whether the system determines the output by searching for valid
 condition records.
Procedure
If you want the system to search condition records for the appropriate
 output, mark the field.
Note
If you leave the field blank and if you are processing sales, shipping,
 or billing documents, the system automatically determines output from
 information stored in the customer master record.

Batch determination not working during goods issue in MIGO screen

Hi,
We have configured search strategy according to shelf life expiration while doing the goods issue with movement type 201, 351 etc. Now when I do goods issue in MB1A for movement type 201 or in MB1B for movement type 351, by entering the * and clicking enter, system proposes the batch nos of the material according to the shelf life expiration. But when I do same procedure in MIGO screen, while entering * in batch field system does not propose the batch nos., instead it gives error as "use of special characters are not allowed"
How the above problem can be resolved?
Thanks in advance,
Satish

Thanks Aroop & Jurgen
I have done the settings as per your suggestions by maintaining the Stock Determination Group. However It picks the batches as per FIFO and not as per shelf life expiration. Also same is the case with MB1A or MB1B.
The reason I wish to use MIGO instead of MB1A or MB1B is as follows
Suppose STO is made of say 10 line items (all Batch managed items). Now while issuing the goods, say for the seventh item there is no stock available then I can not bypass this item (it asks for enter the batch no. even though I change the quantity to zero) and I have to abort the complete transaction. But in case of MIGO I can bypass this item by unchecking the item OK check box.
Any inputs on the above will be helpful.
Thanks,
Satish

PR to PO creation drag & drop partner funtion not working.

Hi,
While creating the PO by using Drag & Drop function in ME21N, the partner function (PI,OA) of the vendor are not appering in P.O. Header except VN funtion. But if we created the P.O. Manually (with same PR) it is appering in P.O. I would like to know is this standard fuctionality of SAP or it has any patch/Note to correct it?

hi Jitendra Kinja
i am facing a simlar kind of issue in my SAP system , is there any workaround for this?pl let me know
thanks
Dkmurthy

Service Registry's Dynamic Lookup of BPEL Partner Link not working

Hi,
Software : SOA 10.1.3.1
OS : Windows XP, 2000
I have deployed webservice application (GetMaxOfTwo) which will give me max of 2 values. Registered the WS in OWSM with user authentication. Registered newly generated WSDL in OSR (Oracle Service Registry). A simple BPEL Process will call service as PartnerLink, which is configured as "Enabling Dynamic Lookup of BPEL Partner Link Endpoints". As mentioned in the document made entry in bpel.xml as registryServiceKey property containing the serviceKey value to the partnerLinkBinding section.
The entire scenario is working fine and changed the servicekey value to wrong value in bpel.xml and redeployed, as expected it was giving me error message saying invalid servicekey.
Now deployed GetMaxOfTwo in another application server and registered in OWSM. Intentionally stopped the first GetMaxOfTwo application. In the OSR Service changed the binding with new WSDL of OWSM. As BPEL process enabled with dynamic lookup it should execute without any error. But the results in this case was giving error saying the service was down. (Means it is referring to the old GetMaxOfTwo webservice.
What could be the reason?, something is missing in the configuration?
Regards
Venkata M Rao
+91 80 4107 5437

Hi
I am having trouble making the BPEL and Systinet to work together. I have Systinet and BPEL installed separately on 2 different servers. I deployed my web services and registered them in UDDI. I created a new BPEL process and added a partner link to refer to one of the web service I have registered in UDDI. When I create the partner link, it is forcing me to give the wsdl and it also gives an error message " There are no partner link types defined in current wsdl. Do you want create that will by default create partner link type for you?". If I say "NO' then deployment fails. If I say "Yes", then it creates a new wsdl file on the local server etc and gives "<Faulthttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>soapenv:Server.userException</faultcode>
<faultstring>com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is 75164a0815ea471a:-3be8c246:117cc377894:-537b. Please check the process instance for detail.</faultstring>". Any help is appreciated.

ECC-GTS : Partner Replication not Working

Hi Guys
We are facing problems when trying to replicate master data from ECC to GTS.
Getting the error message
Of 1 selected partner(s), 0 were processed successfully
Message no. /SAPSLL/PLUGINR3111
Diagnosis
Not all partner masters have been processed successfully.
Procedure
You can access the process protocol in the Legal Service system. This protocol contains more information concerning the type of error that has occurred.
Am sure that there is some changes that needs to be done in the message type DEBMAS, but not sure what i am missing here?
Thanks
Carl

Hi Carl,
That table holds the settings for logging. You can reach it through configuration, via IMGpath:
SAP Global Trade Services
> General Settings
>> Assign Control Profile for Logging
You should make sure that you have entries for the Business Partner, sub-objects /SAPSLL/BP_DISTR and /SAPSLL/PARMA. Generally you should assign Profiles MD_BP and MD_BPM respectively, but whilst you are encountering difficulties, it could be useful to assign GN_TST (General: Full Log) instead.
I hope that helps.
Best regards,
Dave

SSO Partner Application not working

Hi,
I have OBIEE running on a different box. I need to enable SSO for OBIEE. I deployed the analytics.war file in the home oc4j container of Oracle Portal and manually registered it as a Partner Application, made following changes in mod_osso.conf inside ORACLE_PORTAL_HOME/Apache/Apache/conf and restarted the apache server. But when I access the application it does shows me the SSO login page but after entering the credentials it throws internal server error. I checked the log files but don't see any errors in there so wondering what could be wrong.
Here is what I have added in the mod_osso.conf
<Location /analytics>
Header unset Pragma
OssoSendCacheHeaders off
AuthType Basic
require valid-user
</Location>Any help is appreciated.
Thanks

please check your $ORACLE_HOME/sso/log/ssoreg.err and $ORACLE_HOME/sso/log/ssoreg.log and see if you have errors in your sso-registration.
thanks!
AMN

Partner funtions not coming up after saving the telesales order

Hi All
I have saved the sales order with product entry and entering all the manadatory partner functions. If I delete one of the partner fuctions at item level and again try to add that partner function, the related partner functions are not seen again.
I have checked recurring option for all the access sequences to that partner functions . Please help me in this.

Hello,
Did you look for OSS notes on application area CRM-BF-PD? Depending on your CRM version, for example the following may fix your issue:
Note 1035901 - Partner determination not complete at item level
Note 716349 - Missing partner functions in the partner dropdown listbox
Kind regards,
Nicolas Busson.
PS: I'm assuming that you are talking about missing partner functions in the corresponding field... and not that you are expecting the system to redetermine partner functions automatically after the order was saved (which is standart behavior).

SolMan 4.0: Support Team determination via Access Sequence not working

Hi,
from all the documentation I've read I got the following understanding for automatically determination of Support Team via Access Sequence (well, for one possibillity at least):
- Maintain Sold-to-Party in IBase IB52, especially country attribute. DONE
- Maintain Organizational Structure in PPOMA_CRM and create Org. Units, Business Partner No. get assigned automatically. DONE
- The Organizational Unit "Support Team" has the same country attribute as the Sold-to-Party and was marked "Obj. Permitted in Determination". DONE
- In IMG under SolMan -> Sc.-Specific Settings -> Partner Det. Proc. -> Def. Partner Det. Procedure select Procedure "SLFN0001" -> Partner Functions in Procedure -> Select "Support Team" -> Details, in block "Partner Determination" under "Access Sequence" select "Organizational data: Support Team by org. model". DONE
If I now create a support message in a satellite system the Support-Team will NOT be assigned. Instead if I have a look into transaction data of the message under tab "Actions" there is an entry "When message is created, find support team responsible" with processing parameters RULE AC13200137, PARTNER_FCT SLFN0003.
This makes absolutely no sense to me, why is the determination rule 13200137 used (which contains no entries at the moment) instead of the assigned Access Sequence?
Am I missing something?
Regards,
Marco Kipka

Hi,
no hint for solving the problem?
This is getting quite urgent, since I'm working at a customers site and try to implement the describted scenario.
Regards,
Marco

HOW TO USE ZONE ADRC-REGIOGROUP for Partner determination in opportunity

Hi Everyone,
We have an issue link to partner determination.
We need to determine employee function from the address of the sold-to-party activity person function.
In fact the REGIOGROUP field within the selected address in the opportunity is what we need to determine the employee function.
In the meantime we created the attribute REGIOGROUP in the Tcode PPOMA_CRM and we assigned a value to an orgdata.
We couldn't find any rules or function or Badi that does the link between the regiogroup of the address of the activity person and the attribute with same regiogroup value in orgdata in order to have the employee that works in the regiogroup.
Do you have any clue about the way to use this regiogroup?
When we press F1 on the REGIOGROUP field here is documentation we have:
"Regional structure grouping
Regional structure grouping combines all elements of the regional structure (cities, streets, street sections). It is used, for example, for clerk determination."
Does anybody know how to make this clerk determination work? do you know where i could find information about it?
Many Thanks
Laurent Monza

Laurent,
You can implement the BADI COM_PARNTER_BADI and one of the methods
DETERMINATION_ADD_IN
Then you create a new access sequence that uses the exit as the source and assigned that to your partner determination procedure.
Good luck,
Stephen

Partner function not determined if not made mandatory in customizing

Hi!
I have never come across this issue before so maybe it is standard system behaviour. My client is on a ECC 5.0 system and has the need to set upp an new partner function on the ship-to-party which should be derived on the delivery. I have set up the partner function to be available on the ship-to -party and also on the delivery document. However even if the ship-to-party master record has an entry for this new partner (whih is a contact person by the way), the partner is not determined at all on the delivery document unless I make the pertner function mandatory in partner determination for the delivery. This works, but I would rather only get the partner derived when there is a parnter stored on the ship-to. In the current case there will be an entry in the ship-to partner tab with the new partner function and number zero for all cases when the ship-to does not contain a record for the new partner.
Any advice would be appreciated
BR
/Björn

Hi Eric and Eduardo!
This issue is not really to get the contact persons created in the customer master partner tab. The issue is that I want the partner if available in the ship-to-pary partner tab to be added in the delivery partner tab. If no partner is available, nothing should happen at all.
I seem to remember that this behaviour is standard in the sales order, but I could be wrong. I did a similar set-up years ago and I think that the partners were derived without having to set them as mandatory in the partner determination.
The note of FAQ unfortunately did not solve the problem.
BR
/Björn

Employee responsible is not determined in partner determination- Transaction

Hi Experts,
Partner determaination in Activity. Eg : Sold to party :1001051, Employee id : 80007 and sales employee id: 80005.
under BP Sold 1001051 has relationship employee responsible 80007 relationship is maintained.
In the org model under the Sales org postion sales employee : 80005 is assigned.
we have created a partner determination procedure with partner functions 10 as Sales employee with category employee and relationship category as Bur011 as employee responsible and partner funciton 20 as employee with the same category and relationship category.
In the PDP we hace created acccess sequnece with 10 CRM_partner_org data with the rule configured to get the sales employee.
Access sequence 20 as CRM_Partner_business partner relationship to get the employee relationship from BP.
When we create the activity the partner determination is happening and under the partners tab we find the
sales employee = 80007
Employee = 80007
Now in the partner determination access sequnce 10 is not working, system is filling up the value of employee 80007 in the sales employee feild.
we have checked the rule and simulated the rule, we are getting the correct result of the postion and the agent -user assignment as 80005. but when we create a activity it is skipping access sequence 10 and by default fills up the value from the BP relationship Employee responsible 80007(employee) to the sales employee partner function.
If we are having 2 persons as employee in BP, the partners are filled twice. for example : Sold to party :1001051, Employee id : 80007, 80006 and sales employee id: 80005.
in Partner assignment block we are getting output as, it is not takind sales employee id 80005.
sales employee = 80006
sales employee = 80007
Employee = 80006
Employee = 80007
Please help me with a clue how to fix this issue.
Regards,
Karthik

Hi Karthik,
You can proceed with debugging the access sequences. The access sequences are hit via BADI : COM_PARTNER_DETERM and the implementation to chose is with the filter = source name.
Eg: CRM_PARTNER_DETERM_C for relationship based access.
/Hasan

Partner application logoff not working

We have a partner application registered with sso with custom login screen. The login works fine. We use the following code to logoff the partner application in logoff.jsp
response.setHeader("Osso-Return-Url", "http://my.oracle.com" );
response.sendError(470, "Oracle SSO");
session.invalidate();
but the logoff is not working properly. It is not invalidating the session and the logout http request is not going from the application server to the sso server.
Are there any additional configurations for SSO logoff.Any help is appreciated.
Thanks

Hi
The WF should also trigger if i add the Partner function in UI.If i change any Attribute the WF triggers but i dont want to change the attribute when i add the partner function.
If i have only one event for WF that is Partner Change the WF will not trigger it for the 1st time when i save the UI. But next i come to the same saved doc and add a partner function then the Wf triggers.
So this means that Partner change is active.
the issue here is i need to trigger the WF on , the 1st time i save the UI, for which i wil be using Attribute Change and next time when i come back to saved doc the and add only the partner function and no changes are made to attributes the WF should again trigger.
Thanks
Tarmeem

Error while creating Notification: Partner Function is Not Allowed in Partner Determination Profile Q2

During Notification Creation I get the error --Partner Function is Not Allowed in Partner Determination Profile Q2
As I enter Purchase Document Number in the transaction QM01 and press Enter. I get the above error and donot go further.
Can anyone help me here.

Hello Prashant,
You are missing some configuration for the partner function;
Go- to
SPRO>IMG>QM>Quality Notifications>Notification Creation>Partners>Define partner Determination Procedure>
Again Select "Define Partner Determination Procedure".
Select Quality management> Change Partner
Now Select Q2.
Compare settings with Partner Determination Procedure on any other client. Also check Partner functions on the same screen.
Amol.

Partner Determination Not Working in Opportunity

Similar Messages

Maybe you are looking for