Partner Function in Project Definition Level

Hi All
I understand that it is possible to determine what are the partner functions available to the project based on the value indicated in the partner determination field of the project. The list of partner functions to be available are maintained in SPRO.
However, is it possible to configure the system in such a way that when a project is created the following also happens:
1. List of partner functions and users are created automatically at the project definition level according to the project type used.
Appreciate if anybody can advice on this.
Thanks and regards
Thomas

Hi,
Follow the below thread for 'PartnDetProc' config:
https://scn.sap.com/thread/834152
And after that, you can select your Project Type & PartnDetProc with in Project Profile.
OPSA->Project Profile->Control Tab->Basic Data Section->Project Type
OPSA->Project Profile->Control Tab->Basic Data Section->PartnDetProc
And as Amit said, Substitution Rule can be also a good option.
Regards
Shishir

Similar Messages

Vendor Master partner functions change at plant level

Hello All,
I need to change the vendor partner functions at the plant level.By default it takes the partner no equal to vendor no.But in my requirement the partner no can be differnt than the vendor no.Can anyone let me know how to do this?I cant do a BDC recording
also since the system cant automatically select the plant no in the table control.
Thanks,
Rakesh.

Hello Jürgen!
Thanks!
Do you know of any user exit which will help on this.
Best Regards

Disable "Delete" button only at project definition level

Dear Gurus,
Is anybody have any idea regarding how to disable "delete" button at project definition level (and remain enabled for phases, tasks,...)?
I tried it through Web dynpro application, but it got disabled for entire hierarchy.
Regards,
Ravindra

>
Niranjan Dandekar wrote:
> Hi Ravi,
> I dont think its possible.
> Why dont you try User Status with Delete forbidden
>
> if you dont want to use complex one, this status can be very simple like
>
Proj execution
>
> As it is After Release of Project, you wont be able to delete Project.
>
> Niranjan
> Let me know if it helps!!!
Hi Niranjan,
Thanks for your reply,but i want to disable delete option at project defination level not at phase & task level when status is Transfred set to assign
Is there any idea?
Regards
Ravi

Restrict Collaboration tab page view at project definition level only

Hi,
I have a requirement where the cProjects user should be able to view the Collaboration tab page at project definition level only & not at the phase, checklist, checklist item or task level. This is to prevent the user from assigning/creating collaborations at a level other than the project definition.
Is there a way out to get this setting done & how?
Regards
Deepak

My proposal is that you modify the logic in
CL_DPR_BSP_S_PRO_TYPE
Method SHOW_COLLABORATIONS
a small I condition here can control the tab view hide/unhide feature.
or modify the BSP page and take out the complete call
in
phaDetail.bsp
tskDetail.bsp
etc.
Message was edited by: Björn Kettner

Partner Function- Sales Order item level

Hi Gurus,
I want to assigne Partner function -Employee responsible at sales order item level.
i did the configuration settings and i am able to assigne the employee numner at sales order item level but i am not able to assigne partner function-employee resp more than 1. i want to assigne N number partner function- Emp Resp.
kindly tell me the p

Hi sumith
As you want to assign N number of employees at item level . first of all go to IMG->sales and distribution ->basic functions->partner determination procedure->partner determination procedure at item level
While doing partner determination procedure at item level don't check the boxes when you assign to your partner determination procedure. and just assign the sales Employee partner function apart from the standard partner functions.(SP,SH,BP,PY).
Now when you create the sales order and manually you can assign the sales employee number for all items.
Regards
Srinath

Table for project definition partner

Hi,
I am maintaining partner number in project definition (T.code CJ20N). I want to know in which table this information will be stored. I checked in IHPA table but that is Plant Maintenance table.
Apart from this table is there any table Project partner information is available.
I am developing report, that report should display project and partner number.
Regards,
Chandra
Edited by: chandra sekhar S on Nov 20, 2008 4:13 PM

Hi,
I checked these tables, information is not available.
I explain you more detailed about my requirement.
We maintain partner number in project definition> partner tab ( CJ01 or CJ20N). Partner number stored in IHPA table.
We are developing a report, that should display the Project definition and partner number and other info.
I checked entries in IHPA table, I am entering partner number in selection screen and executing it, it is not showing any entries.
If I enter Project number in Object number field and execute, it is showing partner details.
Why i am unable to get information with partner field in selection screen.
I am a functional consultant, please give me any inputs.
Regards,
Chandra

Partner Function Address change at line item level - Item Partners checkbox

Hi guru, we have a requirement that we need to change the address for partner function at line item level without changing the partner number. Currently the ship-to partner function address is automatically coming from the header although the number is modifiable but not the address (when double click into the partner number, the pop-up is grayed out). It is probably because the Item partner check box for the shipto partner is not checked (field name: SD_PARTNER_POSFLAG). However that field is not modifiable in VA02 either.
If the shipto partner number is overwritten, then the item partner check-box is automatically checked and allows address chanage. Is there a way in the configuration that can default the 'item partners' checkbox for certain partner so the address can be changed without the need to overwrite the account?
Any advice is appreciated.
Thank you.

If the item level ship-to party is derived from header partner function, but you want to change the address at item screen rather than header level. On item screen, enter the same function, the same number again in a new line, "item partner SD_PARTNER_POSFLAG" is then ticked. Then proceed to the address change.
No need to do modification.

Vendor partner function

Hi,
I have 2 questions:
1. for the partner roles like goods supplier, invocing party, order party, etc do all these need to have different account groups , example one account group for goods supplier, one account group for invoicing party, etc , etc.
or these can be accomodated in one account group. i have 2 types of vendors domestic and foreign. thinking of having 2 account group ZDOM and ZIMP.
can i have partner function of domestic vendors in ZDOM and partner functions of foreign vendors in ZIMP.
2. if we have a partner function of invocing party (IP), while doing MIRO automatically the vendor assigned to the IP partner roles get defaulted.
how the system understands this? I want to know where this logic is there.
Regards

Hi,
It seems you have not picked the question correctly.
If i am using the same account group where the vendor schema is mandatory, it will be required to be put in IP also.
you cannot do away with it. the parameter what are there in a particluar account group, all always applicable to all the vendor created in that account group.
your comments:
u will assign a pricing procedure to the IP only in case u need a certain type of conditions which are not avilable in the standard pricing procedure ......................and which ever conditions are selected in the po then these are used in MIRO
becaues in miro you will be verifying the invoice with refer. to some documents and system picks the conditions from po
please give a relook into your answer.
*my comments:
vendor partner function is at Header level where as conditions can be at header and item levels.
the conditions will be applicable of VN vendor. how can you have different conditions for main vendor and some different for partner vendor.
if it is possible let me know how can I give value for the conditions maintained for partner function.
Regards
Edited by: Rashmi Mahajan on Feb 16, 2008 6:42 AM

Finish date cannot be set at project definiton level

Dear Experts,
On creating a project from a simulation, we need to copy some date constraints from the simulation into the new project. One of this is the finish constraint at project definition level.
While we got all of the other dates to be copied correctly, the finish constraint is not getting correctly populated by using DPR_ATTRIBUTES exit.
Do you have any other ideas on why is this happening for this specific attribute or how can we fill it in?
Thanks in advance!
Neil
Edit: It seems like the BADI is not working fine for the Project Definition attributes. Has any of you experienced the same issue?
Edited by: Neil Billqvist on Apr 13, 2011 9:45 AM

Solved by applying SAP note

Data Transfer Not Up-To-Date and To Be Archived at Project definition ?

Hi All,
I want to know about the statuses "Data Transfer Not Up-To-Date and To Be Archived at Project definition level?" In documentation Flagged for Transfer and To Assign are only mentioned.
Thanks and Regards,
Arti.

Hello Arti,
the system sets this status when there is a problem with the replication. For example, in the customizing of your project type (accounting area) you have defined the type of transfer as 'Automatic as of release of project'.
Now, for example, you have a project that has status 'Created - Transferred - Data Transfer Not Up-To-Date - Assigned', this means that the replication is not yet complete because according to the customizing setting you need to release the project first.
Hope this helps!
Best regards,
Silvia

Mandatory partner function at sales order item level

Hi all,
I'm customizing partner schema at item level for sales order. I have created a custom partner function, I put it in a new sales order item partner procedure and i set this partner function as mandatory (I want that system show me a message if this function is missing at item level in sales order). This partner function is defined only at sales order item level (not at header level or customer master).
If i create and save a sales order with an item type that use the item partner procedure I have created, system don't show me any message for the item custom partner function missing, else if it is set as mandatory in sales order item partner procedure.
I have read some posts in these forums about this functionality, but it seems a different situation.
Someone had a similar type of problem?
Thank you in advance for any possible suggestion.
Regards
Gianpaolo

Hi,
First you have to create a new partner function.
Then assign that partner function to the account group.
Then assign that partner function to partner determination procedure for the item category.
Over here click on the mandatory button also.
Then assign that partner determination procedure to item category.
Then to XD02 and give your customer number and in the partner tab maintain the data for that partner function.
Now go to VA01 and create your sales order you will see you partner function.
If you wont have maintained it in the customer master then it will prompt an error.
Regards
Raj.

Partner functions - Goods supplier at PO Level

Hi Friends,
Is it possible to maintain a single PO multipule goods suppliers (GS) like as
my process i order a marketing dept of Vendor 1. Vendor1 having goods supplieres in different locations.
in same PO Mat1, Mat2 .
mat1 supplied from mumbai, MAT 2 supplied from chennai. in single PO how can i maintain multipule GS.
if any possible to partner function. and need to maintain two Suppling Location address also.
if possible through vendor - sub range how it will maintain in SAP pls expalain step by step.
thanks.

Hi Jürgen L.
Thanks for ur reply, but i want to know this is i maintained at contract ME31K level, why should not given po level.
if i maintain contracts for Same vendor Different Goods suppliers. how it will effect, where its hit this contract Goods suppliers.
pls explain me.

Need a user exit to add custom partner function in sales order @ item level

Hi,
Need a user exit to add custom partner function in sales order at item level. Goto --> Item --> Partner.
Thanks,
Thiyagi

HI Leo
To add a condition price for a condition type, this has to be assigned in the pricing procedure. For each condition type in a pricing procedure, we will have access sequences. If we follow this approch, the price is automatically extracted basing on the access sequences when condition records are maintained. For this, no coding is required and everything can be done by configuration by Functional consultant.
Naren is right to point out on the same.
If you need to change the price for a particular condition which already exists, you can go by pricing routines. Go through transaction VOFM for the same.
I advice you to discuss with your functional consultant and understand the requirement and then go for modifying accordingly.
Kind Regards
Eswar

Modify Partner Function from Header level to Item level

Hello experts,
A help please!!!
Scenery:
I need to have: - When I create a Sales Order, I can have differents Carrier Partner Fuction for each line.
Currently we have a Partner Function (Carrier) defined at Header Level.
I need to modify it in order to have a Carrier Partner at Item Header.
Many Thanks all,
Barbara

Hello Barbara,
Go to SPRO - SD - Basic Functions - Partner Determination - Set Up Partner Determination -
Select - Set Up Partner Determination for Sales Document Header
Select TA - Standard Order & select "Partner Functions in Procedure" from left side.
Go to the Partner Function of Carrer & make sure that there is NO TICK MARK in the "Not Modifiable" check box. (This will let you change the Carrier at Header level also, if required.
Go to SPRO - SD - Basic Functions - Partner Determination - Set Up Partner Determination -
Select - Set Up Partner Determination for Sales Document Item
Select N - Standard Item & Select "Partner Functions in Procedure" from left side.
Go to New Entries & Enter Carrier Partner Function & make sure that there is NO TICK MARK in the "Not Modifiable" check box. This will let you change the Carrier at Item level.
Hope this helps.
Thanks,
Jignesh Mehta

Partner Functions Mandatory in Header and Item Level

Hi Guys,
I want to Make Some Partner Functions as a Manatory in Header and Item Level,How to make it configure,Please give me
the solution.

hi,
please go to VOPA and select :
after configuring the set up PD for customer master.
then check the second and third ones
FOR HEADER LEVEL:
GOTO SPRO - SD - set up partner determinatin procedure- set up PDP for sales document header & select your PARTNER DETERMINATION PROCEDURE & goto partner functions in procedure and SELECT WHICH PARTNERS TO APPEAR AS MANDATORY & CHECK whether they are appearing in document header or not.
FOR ITEM LEVEL:
GOTO SPRO - SD - set up partner determinatin procedure- set up PDP for sales document ITEM LEVEL & select your PARTNER DETERMINATION PROCEDURE & goto partner functions in procedure and SELECT WHICH PARTNERS TO APPEAR AS MANDATORY & CHECK whether they are appearing in document item level or not.
balajia

Partner Function in Project Definition Level

Similar Messages

Maybe you are looking for