Partner Function Structure in Sales Order

Hi All,
What is the Partner Function Structure in Sales Ordere (Item Level)?
(In which structure the partner functions are displays in sales order item level?)
Thanks in advance.

HI Raja,
Thanks for your replay.
I did the same thing what ever u said, but the thing is while doing debugging the values are not showing in that structure. Like header and item data will available in KOMK and KOMP structurs, not in screen field strucuture. I am thinking that there may be some structure for partner functions like KOMP, KOMK.
Thanks

Similar Messages

Partner function change in sales order

Hi,
I have partner function ZR (sales employee) defined for customer master. I enter a particular employee no 100 in the customer master. and subsequnetly the partner function ZR gets copied into a contract with value 100.
now another user is trying to change the value to 200 from 100, but the system is giving a message that partner function ZR not defned for partner procedure.
If i go to partner determination for sales order , then i see that there is no partner function ZR assigned for a patner procedure.
my question is that the above is happening due to lack of master data for emploee id 200 from HR module or is it that we have to maitain partner function ZR for sales order (I have seen that ZR is not maintained for sales order. ).Iam assuming that for contracts aslo, the config needs to be done in parnter determination for sales order.
regards
sachin

Hi Sachin,
I assume that you have configured the partner functions for Customer master including ZR, also enabled ZR for the partner procedure applicable for the sales document type.
If this is done, then the partner function ZR should be available for entry in the sales order.
Now the problem is that
You shoudl have assigned the partner function ZR to some account group, while creating this partner function, and customer 100 shoudl have belonged to this account group.
However the customer 200 whom you want to update as the new ZR doesnt belong to this account group.
You can use only those customers belonging to the account group which is linked to the partner function ZR as sales employees.
So find out the customers belonging to the account group, which is linked to the partner function ZR. Make sure their masterdata is correct for the sales area which you wnat to use. If all the things satisfy, then you should be able to use them as ZR partner in your sales document.
This should solve your problem.
Pls reward if this helps you to solve the problem

Creating multiple partner function for a sale order @ header level

Hi All,
I have a requirement where in i have to create more than one partner funtion for a sale order @ header level. But the system did not allow this sort of scenario and i got the error,
Partner function ZZ can only occur 1 times in procedure TA (Sales Document Header)
the function module that was giving this error was SD_PCHECK_PARVW_COUNT_OK
here the function module checks if a partner function already exists if so it throws that error. This also updates the VBPA table where partner function is one of the key fields.
Our issue is that we have to allow the system to enable posting 2 or more partner function for the same sale order. It was also verified that the unique key was unchecked during configuration.
is there any other way of over coming this issue as we are updating the standard table. Is it possible??
Thanks a lot in advance for your reply....

I believe this is a configuration setting, based upon the details of your post. Typically, a sales order can have multiple partner functions, but usually the partner type is not duplicated at a single level (header or one item). For example, it would not be logical to have multiple ship-to partners at the header level...these would be unique at the item level, if required.
Speak to your SD functional specialist about the configuration controls for partners, if you must have more than one partner with parvw = ZZ, for the entire order (header level).
Edited by: DaveL on Aug 23, 2011 3:00 PM

Multiple Partner Function in a sales Order

Hi
I have created a partner function ZR Referred By ( Type Customer) but not able to enter multiple ZR in a sales Order
Error .VPD012. Partner Function can occur only 1 in ..
The requirement is to attach the referred customers for reporting purpose and there can be more than one customer referring this new Customer / Order.

Hi
Thanks for the input but the solutions suggested by you all does not work.
The Unique button is only relevant for Customer Master and not the Order. In the Order you can have only one.
The Button Modifiable is only for allowing you to change a Partner and not adding another partner with the same partner function.
Any way I figured a way out, we can use the system provided AA ( Partner Function) and able to use multiple AAs in a Service Contract./Scheduling agreements.
But if you need to have multiple partner in a sales Order ...Only way seems to be to have Z1, Z2 Etc ...
Thanks

Regarding finding out Partner function based on Sales Order/Output Type

Hi All,
I have a issue in finding out Partner function[PARVW], Message partner[PARNR], Message transmission medium[NACHA], Teletex number[TELTX], User name[USNAM], Message processed manually[MANUE], Country Key[TLAND] and some other fields all are related to NAST table.
Actually we have one script which is already working when we run from from VA02/03 for single order.
When we execute from VA02/03 all NAST table entries are filled up and by using those entries we are fetching remaining entries and displaying them in Output.
Now we are developing another program where we will have a selection screen with Sales order, Output Type & Order Type and execute the program and then we will get list of sales orders in ALV list output with check boxes before every record.
Now if we select one (or) multiple records from there and click on Print Prevview button i am calling above SAP Script Print Program but now in that P.Program we will not have any NAST table entries other than Sales Order and Output Type those can be moved to [NAST-OBJKY, NAST-KSCHL].
But here what about other fields in NAST table like PARVW, PARNR, NACHA, TELTX, USNAM, MANUE, TLAND etc.
How can we get them as we are exclusively using those other NAST table entries in above SCRIPT/Print Program.
Can anybody solve this issue!
Thanks in advance.
Thanks & Regards,
Prasad.

Check this FM
WFMC_MESSAGES_SELECT
example
tables : nase.
constants: appl like nase-kappl value 'V2'.
select-options:
rg_nacha for nase-nacha default '1',
rg_kschl for nase-kschl.
ranges: rg_objky for nast-objky.
data:
msgs_1 like msg0 occurs 100 with header line.
*-Fill Object Key
*-Execute fm
call function 'WFMC_MESSAGES_SELECT'
 exporting
 pi_application = appl
 pi_processing = '1'
 tables
 ri_medium = rg_nacha
 ri_type = rg_kschl
 ri_object = rg_objky
 tx_messages = msgs_1.

More than one "Sales Employee"(Partner Function Value) in sales order.

Hi Experts,
My customer requested add more than one "Sales Employee"
in Sales Item Line. As the standard SAP, I can add only one
"Sales Employee" value in one partner function. Any suggestions?
Thanks,
Prach

Hi Prach,
You can add one sales employee per line item. In one line item you cannot add morethan one sales employee however.
If you want to include morethan one sales employee to EVERY LINE ITEM, then
1. Create some PFs like Salesperson1, Salesperson2 etc, say upto 5.
2. Now assign this PF to the sales document header and item category,
3. For all the PFs, you can have the same account group.
4. Now you can create customer master for all these sales person.
5. Once this is done, you can link multiple sales persons for each line item.
Hope thsi helps you
Pls reward if thsi helps you

CRM Table for finding Partner Function for a Sales Order

Hello everyone,
I am trying to retrieve Ship-to-Party Customer Number for a particular Transaction (Sales Order) from a SAP CRM table.
In SAP SD we have a table VBPA for the same.
I would like to retrieve the same either from a single table if available or multiple linked tables in SAP CRM.
I tried to link CRMD_ORDERADM_H & CRDM_PARTNER to retrieve the data .. But it dint work.
I am new to CRM .. so Gurus, please share ur insight.
Thanks
Vin

Hi,
Select GUID_SET in table CRMD_LINK where GUID_HI = CRMD_ORDERAMD_H-GUID.
Use the GUID_SET to select data in table CRMD_PARTNER.
Best regards,
Caíque Escaler

New z-partner function in the B2B-order

Hi,
We have created new Z-partner function for B2B-sales order.
It's works good in GUI: determination by sold-to, filled in the document. ok.
Now, we want to add this z-patner function to B2B-sales order
How I can do it?
Denis.

Hello Denis,
If you are using this partner function for contact person then you need to add this in the shop management.
Logon to the shop management, open the shop , under general information you can see the label user administration under that you can see the option to enter the partner function for contact person.
In all other case if the transaction type of your web order have this partner function assigned, then it will work.
Regards,
Shanto Aloor

Default Functional Area in Sales Order Line Items

Hi,
Is there any user exit that can be used to default Functional Area in Sales Order Line Items.
I tried mv45afzz but not working. Any idea and do let me know the field or structure effected.
Thanks.

Hi Sathish
You can update table XVBAP from program SAPMV45A in program mv45afzz like code below:
FIELD-SYMBOL: <mytab> LIKE STANDRD TABLE OF VBAP.
 ASSIGN (SAPMV45A)XVBAP TO <mytab>.
 LOOP AT <mytab>.
 ENDLOOP.
I hop it helps .
Kind regards
Carlos Machado

Regional structure in Sales Orders

Hello,
I'm trying to use the regional structure functionality in SAP. It allows users to find a city when enterring a postal code and vice versa. My concern is that it seems applicable when we want to enter or change an address in Sales Orders because (and it's hardcoded) several fields (eg city field) are mandatory in the SO addresses.
Why add this functionality if it can't be used?
Note 582851 has apparently been replaced by note 1469064. Did you succeed to use regional structures in Sales Orders? Is there any way to succeed?
Best regards,
Catherine MICHEL

Catherine, I have not used this functionality, but it seems that note 582851 is still very much valid and contains instructions how to perform a modification to make City field not required. 1469064 is a KB article that just explains that some fields are hard-coded and the other note explains how to remove the hard-coding.
So if you ask an ABAPer to follow the note 582851 then it should work, I think. Please be aware though that this is a modification, so SAP won't support it and it may need to be re-applied with every upgrade.
As far as "why add this functionality" - I guess that's just how SAP rolls.

Using bsid and bsad I needed get partner name related to sales order

Hi
Using bsid and bsad I needed get partner name related to sales order
I have gone through the tables but its vbeln column is blank
How can I make relation between bsid and bsad with vbak if vbeln and column is blank in the table bsid and bsad.
Please guide me.
Regards
Sebastian
Edited by: Sebastian John on Apr 21, 2009 3:35 PM

BSID-VBELN = VBRK-VBELN.
Billing document number is there in BSID table.
Regs.

Customer Hierarchy Partner determination in a Sales Order using Payer ?

Dear SD Experts/Gurus
We use Customer Hierarchies extensively in Sales Orders for Pricing & Rebates and it all works fine.
The Hierarchy structure consists at the bottom level of a SoldTo linked to a Hierarchy Customer and many SoldTos can have the same Hierarchy Customer.
We set price conditions at the Hierarchy Customer and that all works fine.
We would like to change our Customer Hierarchy to link the Hierarchy Customer to the Payer rather than to all the individual SoldTos.
This is because we have many SoldTos linked to 1 Payer and this will allow us to have simpler Customer Hierarchy structures making it easier to setup and maintain.
I have changed the SAP configuration to do this and I can certainly maintain the Customer Hierarchy without any problem using transaction VDH1N.
But when I create a Sales Order, the Hierarchy Customer does not get pulled through to the Sales Order Header Partners based on the Order Payer and hence no Hierarchy Customer price conditions are pulled through.
Is what I'm trying to do possible in SAP ?
If so please advise how this can be achieved.
Thanks David
Edited by: David Steele on Apr 15, 2008 1:57 PM

Hello,
I have a similar requirement, although we are building the hierarchies directly in CRM (as we are with BP's in general), and I am using hierarchy category 01 - PRICING.
What I have found is that a sold-to BP must:
1. be assigned to a hierarchy node
2. appear TWICE (!!!) in the document part.det.procedure, once in partner function 000001 (sold to) and again in partner function 00000121 (Authorized partner: sold to).
When the sold to customer exists in both functions within the document, I am able to determine the hierarchy node properly.
Now, my question is, can anyone guess why the main partner (sold to) must appear twice??? or, is this an error in my customizing?
Thank you in advance for your help, and I do hope my observation can help others find a solution.
Regards,
Allon
PS in terms of customizing, I used the following:
partner function 00000001 - sold to
partner function 00000121 - Auth. Partner: Sold-to Party
access for Auth. Partner: 0017 - current partner: sold to *this copies the sold to partner into this partner*
partner function 00000076 - Hierarchy Node Partner
access for hier.node partner: CRM_PARTNER_G Pricing hierarchy
The last bit presupposes that the hierarchy is set up using hierarchy category '01 - pricing'.
Message was edited by:
Allon Riczker - Added configuration steps

Not able to get the Quantity and partner details in the sales order created

Hi Experts,
I am creating a followup order using the FM "BAPI_BUSPROCESSND_CREATEMULTI" . The parameters iam passing are process type, quantity , sold to party (partner) and product ID. I am able to create a sales order but the Quantity and sold to party (partner) are not getting updated in the the sales order when i check in the transaction CRMD_ORDER. When i check in the crm_orderadm_h table and give the Headerguid , i am able to see the process type and when i check in the crm_order_index table, if i give the header i am not getting the partner no and there are two lines created for one header guid. I am providing the code which i have written. Can anyone please help me in this issue??
*& Report ZCREATEORDER_LUCKY_TEST
REPORT ZCREATEORDER_LUCKY_TEST.
DATA : LV_HEADER_GUID TYPE GUID_32,
WA_HEADER             TYPE                   BAPIBUS20001_HEADER_INS,
ITAB_HEADER           TYPE STANDARD TABLE OF BAPIBUS20001_HEADER_INS,
ITAB_CREATED_PROCESS TYPE STANDARD TABLE OF BAPIBUS20001_HEADER_INS,
ITAB_OBJECTS_TO_SAVE TYPE STANDARD TABLE OF BAPIBUS20001_GUID_DIS,
ITAB_PARTNER          TYPE STANDARD TABLE OF BAPIBUS20001_PARTNER_INS,
LT_PRODUCT_I          TYPE STANDARD TABLE OF BAPIBUS20001_ITEM,
WA_PRODUCT_I          TYPE                   BAPIBUS20001_ITEM,
LT_SCHEDLIN_I         TYPE STANDARD TABLE OF BAPIBUS20001_SCHEDLIN,
WA_SCHEDLIN_I         TYPE                   BAPIBUS20001_SCHEDLIN,
ITAB_INPUT_FIELDS     TYPE TABLE OF          bapibus20001_input_fields,
ls_inputfields        TYPE                   bapibus20001_input_fields,
WA_PARTNER            TYPE                   BAPIBUS20001_PARTNER_INS,
ITAB_RETURN           TYPE                   STANDARD TABLE OF BAPIRET2,
WA_OBJECTS_TO_SAVE    LIKE                   LINE OF ITAB_OBJECTS_TO_SAVE,
ITAB_PRICING          TYPE STANDARD TABLE OF BAPIBUS20001_PRICING,
WA_PRICING            TYPE                   BAPIBUS20001_PRICING,
*To store the Objects to be saved.
WA_CREATED_PROCESS    LIKE LINE OF ITAB_CREATED_PROCESS,
ITAB_SAVED_OBJECTS    TYPE STANDARD TABLE OF BAPIBUS20001_OBJECT_ID,
WA_SAVED_OBJECTS      LIKE LINE OF ITAB_SAVED_OBJECTS,
GC_X type c.
gc_x = 'x'.
CALL FUNCTION 'GUID_CREATE'
IMPORTING
    ev_guid_32 = lv_header_guid.
CLEAR : WA_HEADER.
* Passing the respective values from the Header table to internal table.
WA_HEADER-GUID          = LV_HEADER_GUID.
WA_HEADER-PROCESS_TYPE = 'ZTA'.
APPEND WA_HEADER TO ITAB_HEADER.
*Appending the values to the ITAB_HEADER.
*appending orderadm_i to input fields
* ls_inputfields-ref_guid = LV_HEADER_GUID.
* ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'ORDERADM_I'.
ls_inputfields-ref_handle = '0000000001'.
* ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'ORDERED_PROD'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
* ls_inputfields-ref_guid = LV_HEADER_GUID.
* ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'ORDERADM_I'.
* ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'MODE'.
ls_inputfields-ref_handle = '0000000001'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
****** CHANGES MADE
* ls_inputfields-ref_guid = LV_HEADER_GUID.
* ls_inputfields-REF_KIND = 'B'.
ls_inputfields-objectname = 'SCHEDLIN'.
ls_inputfields-ref_handle = '0000000001'.
ls_inputfields-fieldname = 'LOGICAL_KEY'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
* ls_inputfields-ref_guid = LV_HEADER_GUID.
* ls_inputfields-REF_KIND = 'B'.
ls_inputfields-objectname = 'SCHEDLIN'.
ls_inputfields-ref_handle = '0000000001'.
* ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'QUANTITY'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
* ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'B'.
ls_inputfields-objectname = 'SCHEDLIN_I'.
ls_inputfields-ref_handle = '0000000001'.
* ls_inputfields-logical_key = ' '.
* ls_inputfields-fieldname = 'MODE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
****** CHANGES MADE
WA_PARTNER-REF_GUID = LV_HEADER_GUID.
WA_PARTNER-REF_KIND = 'A'.
WA_PARTNER-REF_PARTNER_HANDLE = '0001'.
WA_PARTNER-PARTNER_FCT = '00000001'.
WA_PARTNER-PARTNER_NO = '10017'.
WA_PARTNER-KIND_OF_ENTRY = 'C'.
WA_PARTNER-NO_TYPE = 'BP'.
WA_PARTNER-DISPLAY_TYPE = 'BP'.
APPEND WA_PARTNER TO ITAB_PARTNER.
*"ADDING VALUES TO CT_ORDERADM_I
wa_product_i-header        = lv_header_guid.
wa_product_i-handle        = '0000000001'.
wa_product_i-ordered_prod = '12000014'.
wa_product_i-mode          = 'A'.
APPEND wa_product_i TO lt_product_i.
*"ADDING VALUES TO IT_SCHEDLIN_I
wa_schedlin_i-GUID    = LV_HEADER_GUID.
wa_schedlin_i-quantity   = '30'.
wa_schedlin_i-handle = '0000000001'.
wa_schedlin_i-mode = 'A'.
APPEND wa_schedlin_i TO lt_schedlin_i.
* wa_schedlin_i-schedlines = lt_schedlines.
*"ADDING VALUES TO WA_PRICING
wa_PRICING-REF_GUID    = LV_HEADER_GUID.
wa_PRICING-REF_KIND   = 'A'.
* wa_schedlin_i-handle = '0000000001'.
APPEND wa_PRICING TO ITAB_PRICING.
* wa_PRICING-REF_GUID    = LV_HEADER_GUID.
wa_PRICING-REF_KIND   = 'B'.
wa_schedlin_i-handle = '0000000001'.
APPEND wa_PRICING TO ITAB_PRICING.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = '0001'.
ls_inputfields-fieldname = 'REF_PARTNER_HANDLE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = '0001'.
ls_inputfields-fieldname = 'PARTNER_FCT'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = '0001'.
ls_inputfields-fieldname = 'PARTNER_NO'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = '0001'.
ls_inputfields-fieldname = 'NO_TYPE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = '0001'.
ls_inputfields-fieldname = 'DISPLAY_TYPE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
    ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = '0001'.
ls_inputfields-fieldname = 'KIND_OF_ENTRY'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
CALL FUNCTION 'BAPI_BUSPROCESSND_CREATEMULTI'
TABLES
    HEADER          = ITAB_HEADER
    ITEM            = lt_product_i
    RETURN          = ITAB_RETURN
    PARTNER         = ITAB_PARTNER
    INPUT_FIELDS    = ITAB_INPUT_FIELDS
    CREATED_PROCESS = itab_created_process
    SCHEDULELINE    = lt_schedlin_i
    PRICING         = ITAB_PRICING.
READ TABLE ITAB_CREATED_PROCESS INTO WA_CREATED_PROCESS WITH KEY GUID = LV_HEADER_GUID BINARY SEARCH.
WA_OBJECTS_TO_SAVE-GUID = WA_CREATED_PROCESS-GUID.
* Appending the Guid of the contract to be saved to the internal table
APPEND WA_OBJECTS_TO_SAVE TO ITAB_OBJECTS_TO_SAVE.
CALL FUNCTION 'BAPI_BUSPROCESSND_SAVE'
EXPORTING
    update_task_local = space
    save_frame_log    = GC_X
TABLES
    objects_to_save   = itab_objects_to_save
    saved_objects     = itab_saved_objects
    return            = itab_return.
* Calling the Standard BAPI to Commit the transcation.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'HEADER GUID: ',lv_header_guid.
Any inputs will be highly appreciated!!
Thanks a lot in Advance.
Lakshman.

solved

Adding the E-Mail Adress to partner Goods Recipient in Sales order

Hello.
We are creating sales orders either with EDI (IDOC ORDERS) or function module BAPI_SALESORDER_CREATEFROMDAT2.
In both cases the tables for partners doesn't include a field for the E-Mail adress.
So we send the E-Mail Adress as Name4.
When creating the sales order we want to send the Goods Recipient a message by Mail using the SAP-Standard routines. Therefore we need the Mail Adress in the corresponding field in the header-partner.
Does anyone have an idea how the move the Mail Adress from Name to Mail adress?
During creation of the sales order the adressnumber is not defined.
Best Regards
Gerhard

Hi Srinu,
Thank u for ur help!
"Please note in xd02 you can assign many different patterns with same partner type but in VA02 you can only assign one parter type for one line item un like in XD02."
This was a very nice tip.
I am sorry to bother u more, and since we are on this topic, can I ask u one more question?
I have now made the SP Modifiable just to check if we can change it, and what impact does it have on the DOC header. But I still cannot modify it!.
Note: I saved the configuration, used /nva01 just to be sure the VA01 was not open already(which would have not picked the new configuration). So I let the system save and try new setting.
See config:
Then VA01

Changing the receiving partner in idoc (Outbound SALES ORDER)

Hi All,
In my scenario Sales order (ORDERS) outbound is created and it should send to Delivering plant not to the Sold-to party. how to do this in partner profile? Is there is any coding should be written?
Thank you in advance,
Adithan S.

Hi,
Aveek is right, you only option is to use partner type 'LS'. So you need to create logical systems for these delivering plants, but since setting up 'LS' as the partner function for all the customers requires lots of illogical customizing changes and master data changes, I suggest that you use 'ALE' medium instead of 'EDI'. So that all you need to do is maintain distribution module for any one of these logical system so that output type processing can take place. Later you can use exit 'EXIT_SAPLVEDC_001' to change control record (change recipient to delivery plant).
Cheers,
Sanjeev

Partner Function Structure in Sales Order

Similar Messages

Maybe you are looking for