Partner Function "Vendor" missing when the sales order is replicated to ECC
Hi Gurus,
We are facing a problem on replication of functions partners between
sales order of CRM and ECC.
We have downloaded vendors (partners of table LFA1) from ECC to CRM
following note 883162 and this replication was ok!
We have mapped all partner functions from ECC to CRM and from CRM to
ECC for distribution of partners between systems.
We must include a vendor using partner function '0000092 - Carrier' on
our sales order, which is transferred to ECC. However, when the sales
order is transfered to ECC, the vendor (which was included on CRM) is
missing.
When the sales order is created on ECC and the partner (type carrier)
is included in, the order arrives on CRM missing only the partner
number, because the partner function is there.
How to fix this problem?
Best Regards,
Nivea Faria
Hi,
See this Note : 975195
Hope this helps.
Best Regards
Shiven
Similar Messages
-
Partner function SP determine in the sales order
Dear SD Gurus,
I want to determine the partner function SP in the sales order, when not entered anyvalue, the sales should give incopleteness check.
But what the client here wants is that, sometimes the client wont enter any value on the sales order,so he will deleted the automatcally determined part function on the partner tab of the sales order header.
Here the partner function should be not mandatory (because when the client wants to deleted the line ofn the header tab,system doesnt allow to do it). Also the partner function should not be not modifiable, because he may want to change it when sth wrong has been entered.
So to automatically determined the partner function on the sales order,either modifiable or mandatory should be selected as I know.But when both are selected, this is not a good way for usage.
Do you have any suggeston to make this partner functon automatically determine on the sales order and when wanted, deleted?
Thanks
JackHi,
Try this way and see whether it's what is require by the customer.
First of all what is this Partner function your talking about?
Can you maintain this Partner function for each customer? If possible you can try this method.
Go to below IMG path:
Sales and Distribution / Basic Functions / Partner Determination / Set Up Partner Determination / Set Up Partner Determination for Customer Master
Then highlight the "Partner Determination Procedure"
Double click on "Partner Functions in Procedure" node
If you haven't maintained your partner function there, add it
Set it Mandatory if you want it to be set mandatory for each customer.
Save
Then go to below IMG path:
Sales and Distribution / Basic Functions / Partner Determination / Set Up Partner Determination / Set Up Partner Determination for Sales Document Header
Highlight the relevant Partner Determination Procedure for Order Header
Double click on "Partner Functions in Procedure" node
Add If you haven't maintained your partner function there, add it
Don't Mark it as mandatory or not modifiable
Save
Now go to you customer master from XD02 transaction.
System will ask you to add new partner function as it is Mandatory.
Now create a Sales order from that customer.
System will automatically copy that Partner function to you Order Header.
If user wants to delete it, he can delete it from there.
If user want to change it, he can change it from there.
Hope this helps !
Best regards,
Anupa -
Does MV45AFZZ user exit trigger when CRM sales order is replicated into ECC
Hi All,
When a Sales order is created in CRM, it is replicated automatically using BDOCS from CRM into ECC.
I have requirement to code the logic during the process, when sales order is replicated into ECC.
So I need to know the BAPI which is actually triggered to create sales order in ECC, while replication takes place.
If I could atleast know, if USEREXITS in MV45AFZZ would trigger or not, when CRM order is replicated into ECC, then I could determine, If I could code my logic in those user exits.
Please help me on this.please check this link
keremgomi=wordpress=com
Rgds
Raj -
Does MV45AFZZ trigger when CRM sales order is replicated into ECC
Hi All,
When a Sales order is created in CRM, it is replicated automatically using BDOCS from CRM into ECC.
I have requirement to code the logic during the process, when sales order is replicated into ECC.
So I need to know the BAPI which is actually triggered to create sales order in ECC, while replication takes place.
If I could atleast know, if USEREXITS in MV45AFZZ would trigger or not, when CRM order is replicated into ECC, then I could determine, If I could code my logic in those user exits.
Please help me on this.Hi,
I guess it should. Just put external break point (RFC userid with debuger rights) and see.
Thanks,
Nilesh P. -
Can the same partner function be entered in the sales order more than once.
Hi
I know that as per standard same partner function cannot be entered more than once in Sales order.
If somebody has tried ways to do this please share.
THanks
AlagsYes. You can have multiple Ship to Party, Bill to Parrty & Payer in Sales Order. But Sold to Party will have to Unique & single.
This functionality of having multilpe Partners is widely used & just follow as Deepak suggested above & you too can have multiple Partners of same type in single Sales Order.
But there has to be a strong Business case in doing so... say different Ship tp Party for different line items in Sales Order or different BIll to Party for some line Items in Sales Order.
Hope this helps,
Thanks,
JIgnesh Mehta -
Credit exposure updating even when the sales order is blocked
Hi,
We are using FSCM credit management. We observed that the credit exposure is updated even when the sales order is blocked. When we investigated it is found out that SD has removed the requirement 101 in the subsequent functions. The reason is they want the confirmed quantity to be updated even though the order is blocked. This will allow the Material Planning to go ahead and purchase the goods. Is there a way around it where we can have MM see the confirmed quantity in the order and it will not updated the credit exposure?
Thanks and Regards
Madhu VutukuriHi Sravan,
Please let us know, whether the document is really getting reflected in the blocked documents list for a particular kind of block and you are releasing that particular block in the specified area as we have different areas for releasing blocks. Chances are that in the mean time, the concerned block might have been removed in the system and not updated as it might have been. It will be of great help, if you can provide us with the screenshots of the process followed.
Regards,
Aman -
Function Module to update the sales order header status
Hi,
I am looking for a function module to update the Sales order header status.
Pls. let me know if anybody has used any FM to update the SO status.
Thanks,By mentioning status do you mean Object status or Document status??
For Object status you may use FM: STATUS_MAINTAIN
For document status it changes according to flow.
Regards
Eswar -
Partner function in header level of sales order
Hi All,
During the sales order create/change (VA01/va02).
Depending upon the business unit i want to populate partner function.
I have modified the user exit "MV45AFZZ - userexit_save_document_prepare " and userexit_save_document .
i tried both the exit.
During debugging its deleting from the XVBPA table but its not reflecting in the final screen.
in final screen its showing the partner function from master data it is not updating from the exit.
<< Moderator message - Everyone's problem is important >>
Thanks in Advance.
Edited by: Rob Burbank on Nov 11, 2010 3:49 PMyou can populate XVBPA-UPDKZ = 'D' for the row you want to delete from XVBPA.
I Hope it will work for you.
Thanks
Raj -
Field missing in the sales order.
Hi Experts,
We have notification for which the sales orders are created.
Whenever some changes are made in the notification they get reflected in teh sales order once u open it an save it again.
But this time when we made some changes on the notification and hence opened and saved the sales order along with reflecting the changes in the sales order as per the notification one crucial field got cleared.
But we are not able to trace how is this field getting cleared.
We have tried creating new sales orders and again tried the same changes but this time no field got cleared and everything is fine.
But the original sales order still have the field blank which is important.
Please advice.Hi,
The copying controls are same as for other notifications.
We have tried creating sales orders without changing the copy controls. But this prob has not occurred with the sales orders we are creating now. But the prob that has occured in case of original sales order still persist.
Please advice. -
When the sale order creting with route
when iam creating the sale order with route is coming automatically with route determination. but this specific order i did nt want route so deleated and save and is ove my problem. but with ref the same order i am doing it wail not appearing the route in order so pl help me
Hi,
If you have mainatined route determination, the route will be picked automatically in the order, if you dont want u can remove the route in the order itself, now if you are creating delivery wrt order the route will not be picked in the order as u have removed the route frm the order.
But if you create a order again the route will be picked if you have not deleted the route determination in the SPRO.
I was not clear as what u r asking, so if i hav not answered u completely, [;z explain wat u want to know
Noopur -
Profit center is missing in the Sales Order Items
Hello,
I would like to ask why a profit center field in the sales order item data is blank but in the material master, the profit center is maintained. Why was it not populated during order entry?
Hoping for your support.
Thanks.Hi Cynthia,
Please check if you have maintained Profit Center at correct place in Material Master. It is maintained at Mat master: Sales: gen/plant view (MARC-PRCTR)
If it is maintained here, it should get populated at Sales Order Item -> Account Assginment tab. This is Standard SAP behavior.
Regards,
Rianka -
Error:G/L account missing when saving Sales order
Hi Guys,
I will appreciate your input on this.
Whenever I try to save a Standard order for a particular material I get the error"G/L account missing. I have checked all the Account assigment settings and they are correct.
I faced this issue while creating an order for downpayments.This error occurs when we use the material of the kind "make to order".
RegardsHi Pvarinder,
First please check the customer account assignment group at your sales order header level and material account assignment group at your item level.
If they are ok then go to Environment->Analysis->Account determination
As you said the entries are ok in VKOA, so my guess is I think you have some condition type which is not getting the right G/L account.
Please check and revert with your findings.
Regards,
MT -
Freight Carrier missing while creating sales order using BAPI
Hi All,
I am using BAPI BAPI_SALESORDER_CREATEFROMDAT2 to create sales order. At header level, I am passing sold-to-party,ship-to-party and Freight Carrier fields as partners.
When the sales order is created it is creating partners sold-to-party,ship-to-party but freight carrier is missing in the partners.
To partners inernal table, I am passing the partner role and partner number as following:
int_partners-PARTN_ROLE = 'AG'.
int_partners-PARTN_NUMB = int_order-kunnr.
append int_partners.
clear int_partners.
int_partners-PARTN_ROLE = 'FC'. "Frieght carrier
int_partners-PARTN_NUMB = int_order-kunnr2.
append int_partners.
clear int_partners.
int_partners-PARTN_ROLE = 'WE'.
int_partners-PARTN_NUMB = int_order-kunnr1.
int_partners-NAME = int_order-name1.
int_partners-NAME_2 = int_order-name2.
int_partners-STREET = int_order-street.
int_partners-POSTL_CODE = int_order-post_code1.
int_partners-COUNTRY = int_order-country.
int_partners-CITY = int_order-city1.
int_partners-REGION = int_order-region.
int_partners-TRANSPZONE = int_order-transpzone.
int_partners-TAXJURCODE = int_order-taxcode.
int_partners-district = int_order-city2.
append int_partners.
clear int_partners.
Freight Carrier is set up as a "Vendor" instead of Customer in our system.
If anyone has solution to pass "Freight Carrier" through BAPI, please let me know.
Thanks,
Sonali.For Vendor (Freight carrier) , I checked the master data and it has partner function defined as VN (vendor).
I have another issue with the salesorder create BAPI:
I am getting error
"E - 000010 : Condition rate does not agree with init. indicator for condition PR00"
when I am updating the PR00 condition value with '0.0' .
Please advice if anyone has any idea.
Thanks,
Sonali.
Thanks,
Sonali. -
Delivery date on the sales order
Hi frnds
I am facing an issue here. When the sales order comes of credit hold the system proposes a new delivery date in the sales order. How can i change the settings to avoid the system from assigning weekends(Saturday & Sunday) as the delivery date????
I have checked that the factory calendar is set for weekdays only and also the propose del date is check marked in VOV8, OVX5 & OX10 have factory calendar asssigned but i am not able to figure out how to restrict the delivery date to weekdays to be proposed by the system.!!!
Am i missing something???
Will appreciate your suggestions.
nullHi,
The fields needs to be activated in the filed group in accounting.
The path is SPRO -> Financial accouting -> Accounts Receivables and Accounts Payables -> Customer accounts -> Master data -> Preparations for creating Customer master data -> Define account groups with screen layout.
Shiva -
Set Partner function to 'ZT' in the migo transaction
Dear all,
I have a requirement wherein the PO is raised in background at the time of GR through MIGO.
I am supposed to pass the partner function as 'ZT' when the MIGO is done and partner function should be set as 'ZT'
during auto PO generation. Is there any BADI/user exit which can help to achieve the same.
Thanks in anticipation.Define Account Groups with Screen Layout (Customers) OBD2
SPRO > Financial Accounting(New) > Accounts Receivable and Accounts Payable > Customer Accounts > Master Data > Preparation fro Creating Customer Master Data > Define Account Groups with Screen Layout (Customers)
Set Up Partner Determination for Customer Master
Define new Partner Function
SPRO > Sales and Distribution > Basic Functions > Partner Determination > Set Up Partner Determination
Account Groups u2013 Function Assignment
Set up partner Determination for Sales Document
Sales and Distribution > Master Data > Business Partners > Customers > Customer Hierarchy > Set Partner Determination For Hierarchy Categories
do not forget to create and assign number range
Assign Number Ranges for Customer Account Group OBAR
SPRO > Financial Accounting(New) > Accounts Receivable and Accounts Payable > Customer Accounts > Master Data > Preparation fro Creating Customer Master Data > Assign Number Ranges for Customer Account
Maybe you are looking for
-
Sales BOM and Incompletion Log
Hi SAP experts. We are on ECC 5.0. Wer are exploding sales BOM in sales orders. I have a requirement that if for certain reason a BOM fails to explode for a particular line item then that item should be go an incomletion log. I was able to select fie
-
Problem exporting with Premiere Pro/Media Encoder CS4
Hey there. I've got 15-minute long movie edited in Premiere. Whenver I've tried rendering/exporting to see what the final product looks like, Media Encoder will usually freeze up about halfway through encoding. The time estimated/time elapsed will fr
-
Can anyone help me find an appropriate backpack or messenger bag to carry all of these items?
-
Record stop and domain "in recovery" status.
Hi, We have a Sun Management Center 3.6.1 in solaris 10, it's install to monitoring the SF25K hardware, it's configure an action by sending an email, into Hardware->Platform Config Reader->Domain->Status. Yesterday, the system generated 2 messages: "
-
How to find Materialized views in OBIEE
Hi gurus, how to find materialized views which are used in OBIEE? Do We see them in view log session after running a report? I have a requirement to find MV'S.Do we use MV'S in OBIEE?What is the use of MV? Kindly answer me. Thanks, siva