Partner functions WebUI Solman

Hi experts,
I'm using Solman 7.1 in Incident Management and I've got a strange problem in using partner functions.
I used SLFN0002 and created a copy of it ZLFN0002. Then I added both in the WebGUI under "details". And here is my problem:
when I fill the field SLFN0002 the business partner appears in both fields. But in bock "business partner" only SLFN0002 is filled.
when I then delete the field (under details) ZLFN0002. SLFN0002 is deleted too.
when I fill field ZLFN0002 the business partner doesn't appear in the field (but under business partner block)
It seems like an linking error. But I don't know where to find this.
Does somebody has an idea how to solve that issue?
Best regards,
Christina

Hi,
I checked the recommended note --> didn't solve the problem.
I read the block - for me everything seems to be ok.
Here are some screenshots
the partner function:
under specify partner function display in transaction:
I used these numbers in the WebUI.
Any idea how to fix this issue. (Other partner functions work fine)
Thanks a lot.
Christina

Similar Messages

Sold-To Party determination using Reported-By partner function in SolMan 4

Hi,
I'm trying to populate the Sold-To party field via Reported-By partner function in Solution Manager 4.0.
That means in the Organizational model the Sold-To-Party is a Organization Business Partner, and the person who create the Support Message or Service Order is a person (Person BP) who works for the Sold to Party Org. Unit, then I request that when a Support Message is reported by a person that belong to The Org, Model, the system fulfill Sold-To-Party automatically.
Example:
Org. Unit: 10000 (BP Organzation) <----
Sold to Party
Employee: 10001 (BP: Person) <----
Reported by
Any hints how I could acheive this?
Will award points.

Hi,
Just to clrify few things.... In terms of Solution Manager, the sold to party gets populated from the BP that is assigned to the Install Base Component. It is not required to have the BP maintained as a Sold-To to populate the Sold-To party field.
I know that is confusing. But that is how it works. So in very general terms I'm looking a way to bypass the BP assignment to Install base and get the BP number of the Org unit that the user(employee) is been assigned to populate the Sold-To party field. Pls note that the Org Units are not maintained as Sold To parties.
Thanks

Partner function for ChaRM approach in Solman 7.0

Hi!
I would like to set up ChaRM with Service Desk in Solman. One of the prerequisite is to create business partners.
The questions:
which partner function will be used within ChaRM?
which partner function types will be used within ChaRM?
what is the assignement of ChaRM-role (requester, tester) to partner function type/partner function?
Should the transactions/tables such "CRMC_PARTNER_FCT", "CRMC_PARTNER_PFT" be customized?
Thank you very much!
regards
Thom

Thom Heinemann wrote:>
> which partner function will be used within ChaRM?
Anand: The partners funtions used depends on which partner determinations is assigned to the CHARM transaction type ( standard for CHARM transaction type is SDCR and the standard partner determination procedure is SDCR0001 ) and so all the partner funtions assigned to the above partner determination procedure will be used in CHARM.....
So can also create you own partner functions and assign it the some partner determinations procedure and then finally assign that partner determination procedure to the relevant transation type....
Make sure that you dont change any standard partner determination procedure, just make a copy of it and then include the partner functions u desire in that Z partner determination procedure....and then assign this partner determintion proc to trans type SDCR..
> which partner function types will be used within ChaRM?
Anand: This depends on the partner determination procedure assigned to the transaction type for CHARM (SDCR)..
All the partner function included in that partner determination proc will be used....
> what is the assignement of ChaRM-role (requester, tester) to partner function type/partner function?
Anand: Refer SPRO path Solman-> Scenario specific settings->Service desk->Partner determination Proc-> Define partner funtions.. Just go thru it and scroll down to find out SDCR0001, SDCR0002 and so on...
Basically CHARM role is mapped with this partner function types mentioned as above ...
> Should the transactions/tables such "CRMC_PARTNER_FCT", "CRMC_PARTNER_PFT" be customized?
Basically the SPRO path mentioned above refer the same tables......They can be customized....only if the requirements demands....
Inspire ppl by rewarding !!
Regards,
Anand

Parties involved work center and partner functions in SAP WEBUI

Dear Experts,
Here is the situation
I have sales rep, quote admin1, quote admin2 and quote admin3 positions in my org model. Each level has approval process. All of these three types of users will create quotes directly without a previous document/follow-up document.
When a sales rep or anybody other than quote admin logon to create quote, parties involved <> quote admin should be admin1. When admin 1 logon, it should default to admin1. Admin 2 logs in only after admin1 so, it should display admin1 and admin2. When admin 3 logson, it should show admin1, 2 and three. They need to be able to see howmany quote admins already there in the quote. How can I get this?? Please help me..

Hi Sri,
You can use Partner Determination Procedure for the first time to create a Quotation automatically which will be triggered by the system. For the next time, based on your requirement you can probably need to use something else which will trigger the partner determination and will select the partner function and the business partner. You can check the badi - COM_PARTNER_BADI which is used for the Partner Procedure Determination.
Hope this helps.
Thanks,
Samantak.

Mail to multiple Partner function

Hi,
We are in process of implementing SOLMAN CHARMS .
i have a requirement where i need to send mail to multiple partner function.
I have created a z action , however it gives option to select only one Partner function.
Is there any way to send mail to multiple Partner function or any workaround for this?
Kindly suggest.
Regards,
Sangvir Singh

Hello Sangvir,
As stated, you can create multiple actions (if you do that, don't forget to properly tune the action merging). This is the best option, because involves only configuration.
You can also add a few ABAP code in a new implementation of the standard send mail method and add multiple mail destinations in the "To" or "CC" fields. This is simpler than sounds to be. Ask for an ABAPper to analyze the method source code and he/she will adapt it for you in a question of hours.
Best Regards,
C Canzone

ChaRM: Partner function types

Hi!
I would like to set up ChaRM with Service Desk in Solman. One of the prerequisite is to create business partners.
The questions:
which partner function will be used within ChaRM?
which partner function types will be used within ChaRM?
what is the assignement of ChaRM-role (requester, tester) to partner function type/partner function?
Should the transactions/tables such "CRMC_PARTNER_FCT", "CRMC_PARTNER_PFT" be customized?
Thank you very much!
regards
Thom

Hi,
You need to define partner and then partner determination procedure. Then assign it to transaction type SDCR.Partner function are such as creator,developer,change manager,developer,tester,change advisory board etc.
Inspire by rewarding for more details.
Regards,
Nikhil

How do we search by partner function and authorization group?

1. In CRM Web UI, we are not able to search by "partner function" and by "auth group."
2. When viewing the Account, we can see the "Contact Person" and the "Function" tab is visible but we cannot see the "Partner Function"

Hi Vishal,
Can you please help me look Partner Function and Relationship type search capability in WebUi
you mentioned that partner function search is standard functionality.
Thanks
Amish

Creation of partner functions for customer master with LSMW

Hello,
I try to create partner functions together with a customer via Batch Input in LSMW.
Object: 0050, method: 0000, program name: RFBIDE00, program type: B.
I use the structure BKNVP (Customer master partner functions) to create a new partner and set values for the fields KTONR and PARVW.
When I start the batch input the fields are filled in correctly in a new dynpro. After the confirmation of these values the dynpro changes back to the partner functions sscreen, but the value for KTONR isn'n being transferred. So I get an error message.
Is it only possible to update partner functions with that BI or what is going wrong ?
Thanks in advance and regards
Alex

Hi Alex,
Could you specify what error message you are getting?
Thanks!
Rudra

Automatic assignment of Partner Function (Dealer) based on Postal Code?

Hi Experts,
We are realizing a project in the Bathroom-Product Industry. Responsible for the service to the end-clients are authorized dealer. When creating a service ticket the responsible dealer has to be assigned automatically to the ticket on the basis of the postal code where the IBase (the product) is installed.
The process is:
1. The client is calling the Interaction Centre and first the IC Agent has to identify the account and the Installed Base (The installed base contains the postal code where the product of the client is installed) of this account.
2. An Interaction Record is created to record this inbound call.
3. Afterwards a Service Ticket is created as a follow-up Document of the Interaction Record. In the moment of the creation of the Service Ticket the correct dealer has to be assigned automatically to the Service Ticket (as a Partner Function not as a Service Organization) on the basis of the postal code of the installed base.
I have the following question! Which are the steps to assign automatically a Business Partner Function to a Service Ticket? We also need to create a Z-Table with the postal codes for which every dealer is responsible.
Example:
Dealer 1 is responsible for the postal codes: 08040 - 08045 and 08056 - 08059. If a client is calling and his product (Installed Base) is installed in Postal Code 08042 or 08054 the dealer 1 has to be assigned to the service ticket.
I hope I could make myself clear ;-)? Anybody can give me a hint how to do that? What are the basic steps?

Slightly similiar, originally being an R/3 customer before implementing CRM our dealer equated to sales office.
In the CRM Org model (PPOMA_CRM) in the attributes of the sales office we entered the Regions & Postal codes for that dealer (pain in the arse to do) and in CRM the sales office in the org creates a BP.
We used a org rule for the IR record based on country, region, postal code to determine the appropriate sales org, DC, div, and sales office based onthe zip code. We created a custom partner function to represent the partner number of the BP from the org model. Then we configured a custom relationship "ZORG" "Is partner of sales office" and went into the BP master and assigned the actual dealer number as a partner to BP from the org model that = sales office. From that we configured a custom access sequence to pull the actual dealer number from the org model office relationships.
We looked at territory management, but our dealer is an "org BP" and territory management appeared to want to drive to a person BP number.

Problem in creation of partner function creation.

Hi all,
During customer Master upload using LSMW direct method, Iam getting this problem.
while creating Sales view using XD01, three partner function VE (Sales Representative), SH (Ship-to party), ZI (Front Office) are getting displayed in the last tab of sales view creation.
Because of some customizing,value for SH is getting populated automatically. But the values for VE & SH are not getting populated from the flat file.
But the values are present in the respective field (KTONR) and able to see in the display convert data.
If I enter the manual value during runtime in LSMW, it accepts the value. Since it involves huge amount of data, manual entry for records is not possible.
Kindly provide the solution.
Regards
Narasingam.B

This problem can be solved by proper customizing.
Regards
Narasingam

I can not see all "Divisions" in BP Rel.--Partner Function Assignment

Hi,
When I edit "Partner Function Assignment" in BP reliationship such like BUR011("Employee Responsible"),
I can not see all "Divisions" in list which I can see in configuration via SPRO-->Customer Relationship Management->Master Data->Orgnizational Management->Division Setting->Define Divisions.
E.g., in configuration, I can see 7 records of divisions from "001" to "007", but in "Partner Function Assignment" of BP relationship, I can only see "002" to "004".
Do you know why? Thanks a lot!
Best regards,
Long

hi
that should not be happening,if they are visible in one client then should be there in another too
do one things try run this
hrbc1_atributes_buffer_update
it will refresh the buffers of your org structure and then you may be able to add this
also check the check box where it is mentioned that"object determination should be permitted"
remember it will run only for once after you run this the check box will be unchecked again
i guess it may solve your probs
also try to structure your org structure index
use t code
crmd_index_om
and withtin the object type give O
and execute
best regards
ashish

Can we view SH's partner functions in Sales Order?

Hi All,
SP has a different SH and FA is assigned to SH in master record. When we create order we can see all the partner functions of SP but we can't see partner functions of SH. User wants to see which FA is assigned to SH. We can only view partner functions of SH in delivery document. Is it possible to view partner functions of SH in sales order as well? Please suggest the ways to configure this setting.
Thanks!!

Hi,
Yes, you can view . Check the Partner determination procedure, include the partner function SH to your partner determination procedure assigned for your sales order.
Regards,
Murali

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

Partner functionality in release order

Dear Gurus,
I have created a contract with partner functionality.
I created a Purchase Requisition referring contract (Using source of supply). I need to create Po in ME21N by adopting PR. System copies all the other details but not partner details. I need to enter partner details manually in PO.
But When I create a PO in ME21N by adopting the same contract, partner details are automatically copied from contract.
Please suggest me what should I do If my PO should copy partner details of contract (while creating PO adopting PR)
Regards,
Sastry

i hope , if u have created the vendor master , then PO will take all details of partner form vnedor master .
SO check the which details u are updating manually, the same as its maintained in master data or not.
IF not maintain it in vendor master .
Thansk
SAP-MM

PO and partner functions of a contract

Hello,
We have the following problem:
In our system, we maintain partner functions in the partner functions of the vendor.
And for this vendor we have a contract. However, we don't maintain partner functions in the contract.
But when we create a PO for the vendor and the contract, the system looks for partner function in the contract and doesn't look any more for the partner functions in the vendor. but, as we have no partner functions in the contract....partner functions in PO are empty.
I can't find customizing point to indicate that we don't want to look partners functions in contract. Is it possible?
Thanks,

the data is always taken from the most specific source, which is the contract in your case. it is not possible to use contracts and omit at the same time the partners (or not available partners) from the contract.

Partner functions WebUI Solman

Similar Messages

Maybe you are looking for