Partner furnction in bi

We are maintaining the sales employee in the customer master as partner function EE and the same is flown in sale order & billing document. In the data source of 2lis_11_vaitm and 2lis_13_vdkon we don't find the partner function details. How to bring this data. This should be brought from KNA1 or from the billing document. Should we need to maintain this data through infoobject or to modify the 2lis_13_vdkon or 2lis_11_vaitm.
Kindly help

Hi,
The partner functions are available in KNVP table, once you have maintained in customer master then it will passsed into sales order and Billing document.Check in customer master if somebody has changed the partner details.
Regards,
Hari Challa.

Similar Messages

SSO to partner application running under IIS

Hi,
We have a complete set-up for 9iAS Release2 where some applications are running. In parallell we have an application running under IIS, and would now like to enable the IIS application as a partner application to 9iAS letting the 9iAS SSO server handle the authentication.
In the documentation of Oracle Proxy Plug-in I read that this proxy plug-in can be used to proxy requests from IIS to Oracle http server (OHS) and also in this way enable SSO.
My question is if this can be done only for applications running under 9iAS but having IIS as web server, or if it is also possible like in our case to enable SSO via the proxy plug-in to applications runnind under IIS?
If this is not supported is the only available solution to use the SSO SDK in my IIS application?
Thanks and regards,
Rikard

Here's a DIY answer.
See Metalink Note 269820.1 which shows you how to use Perl to overwrite the host name in the HTTP header and remove the port number.

Problem in Creation of business partner

i create business partner with the help of BAPI_ISUPARTNER_CREATE_FROM_DATA
i want to add mobile number but there is no any field such like mobile number in address data table.
But there is separate table of telephone data. When i use this table to store the mobile or telephone number at that time bapi stores the data on the telephone table in independent communication but not in direct communication fields .
Please , suggest me what i do to store the data in direct communication instead of indirect communication.
Thanks for review my post...

Hi ilesh,
There are 2 kinds of communication data -
1. Address dependent- this is linked to the address, and would need to be created / changed using BUPA_ADDRESS_CHANGE. You need to pass the BP number and the address number to which you want to link the tel / mobile number.
2. Address independent - this is directly linked to the BP, without dependency on the BP's address. You can modify such data using BUPA_CENTRAL_CHANGE.
Now, you can decide which fields you want filled, and accordingly use the correct FM. Second point - how to make sure the number gets created as a mobile, and not normal telephone. There is a field called R3 user in the table ADR2, and also in the Telephone structures that you fill while calling the FMs mentioned before. Make sure you pass the correct value of R3 user ( i think it is 2 for mobile, but you can check it by looking at the value range for this element in ADR2 through transaction SE11).By default, R3 user is 1, which denotes landline telephone. To create mobile numbers, pass R3 user = 2 (or whatever value you look up from the value range).
This should solve your problem.
Cheers,
Rishu.

HOW TO SET UP PARTNER APPLICATION TO USE SSO OUTSIDE OF PORTAL

If anyone knows how Portal switches context to run as the db user mapped to the lightweight schema and how it knows the db schema password please let me know.
Should you have any queries please do not hesitate to contact me on 07775 896738.
From document Oracle Portal Security Overview on PortalStudio.oracle.com:
In Single Sign On mode (EnableSSO=Yes in the DAD), mod_plsql determines the name of the light-weight user and mapped database schema by calling
WPG_SESSION_PRIVATE.GET_LW_USER and WPG_SESSION_PRIVATE.GET_DB_USER respectively.
** These calls are done using the Portal Schema (PORTAL30) and Portal schema password **
mod_plsql then executes the procedure in the requested URL by using the N-Tier Authentication feature to connect to the database as the user returned from
WPG_SESSION_PRIVATE.GET_DB_USER. ..... Note that N-Tier Authentication requires all schemas to be used for Portal user mappings to be granted 'connect
through' privleges to the Portal schema (PORTAL30).
The WWCTX packages are also used.
So this is how it works with standard Portal
- the document states that the WPG_SESSION_PRIVATE package is only accessible to the Portal schema
- but I checked and it is also available to PORTAL30_SSO
SQL> desc WPG_SESSION_PRIVATE
PROCEDURE CREATE_SESSION
Argument Name Type In/Out Default?
P_COOKIE_NAME VARCHAR2 IN
FUNCTION GET_DB_USER RETURNS VARCHAR2
FUNCTION GET_LW_USER RETURNS VARCHAR2
PROCEDURE GET_SESSION_INFO
Argument Name Type In/Out Default?
NUM_PARAMS NUMBER OUT
PARAM_NAMES TABLE OF VARCHAR2(32000) OUT
PARAM_VALUES TABLE OF VARCHAR2(32000) OUT
PROCEDURE RESET_SESSION
Argument Name Type In/Out Default?
P_COOKIE_NAME VARCHAR2 IN
In my case only the Login Server (PORTAL30_SSO) is going to be used/installed
- the SAMPLE_SSO_PAPP application will only work if the DAD used to access is it set to use Basic authentication, i.e. the actual integration with the Login Server
is done in the sample application code calls, stored in the database
- when a DAD has enableSSO=yes it automatically accesses Portal (PORTAL30) packages to implement N-Tier authentication
I'm currently testing:
1. Configuring the SAMPLE_SSO_PAPP sample as documented with a DAD with Basic authentication
2. Amending the ssoapp procedure to set context to another (db) user on successful authentication:
wwctx_api.set_context (
p_user_name => 'SCOTT',
p_password => 'TIGER' );
3. If this works then set_context with get_lw_user instead
I have now amended the ssoapp procedure as follows to print out
1. The userid entered when the login box is presented
2. The Database user which the Portal Lightweight user is mapped to
3. The Lightweight user Portal has used for authentication
Amendments to papp.pkb:
(ssoapp procedure, declare db_user_info and lw_user_info as VARCHAR2 in declare section)
htp.p('Congratulations! It is working!<br>');
db_user_info := wwctx_api.get_db_user;
lw_user_info := wwctx_api.get_user;
htp.p('User Information:' || l_user_info || '<br>');
htp.p('DB User Information:' || db_user_info || '<br>');
htp.p('LW User Information:' || lw_user_info || '<br>');
The following shows the interesting results from my testing:
- if the user owning the sample_sso_papp package is PORTAL30_SSO then the call to wwctx_api.get_db_user succeeds
- if the user owning the sample_sso_papp package is a non-portal schema e.g. SSOAPP below the call to wwctx_api.get_db_user generates a User Defined exception
Steps to test:
Created new schema SSOAPP on the database
- edited it in Portal and checked the use this schema for Portal users checkbox
- created new Lightweight user SSO_LW in Portal, mapped it to SSOAPP schema
- created new Lightweight user SSO_SCOTT in Portal, mapped to SCOTT schema
- loadjava -user ssoapp/ssoapp@portal30 SSOHash.class
- sqlplus portal30/portal30@portal30
@provsyns ssoapp
- sqlplus ssoapp/ssoapp@portal30
@loadsdk.sql
@loadpapp.sql
Created DAD with basic authentication SAMPLE_SSO_PAPP
- username: ssoapp
- default home page: sample_sso_papp.ssoapp
Registered the Sample SSO Partner Application with the Login Server and ran regapp.sql
Commented out the calls to get_db_user in papp.pkb to avoid exception
- called http://<server>/pls/sample_sso_papp
- logged on as SSO_LW/sso_lw
- got output:
Congratulations! It is working!
User Information: SSO_LW
LW User Information: PUBLIC
So the Portal lightweight user is not returned as SSO_LW
if anyone knows why the Lightweight User in my test is returned as PUBLIC not SSO_LW
Best Regards
MIchael

http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

SSO for partner applications

Hi All,
I have installed 10g AS Release 2 on a system. I also have Application Express(formerly HTML DB) installed on the same system. I registered one of the HTML DB applications as partner applications and have put SSO authentication for it.
When I try to login the AS looks at the OID installed on the system(which I gave during installation). I want it to look at the Oracle gmldap.oraclecorp.com server OID so that only Oracle employees login.
Can anybody tell me how to change the OID and what are the entries to be give to configure it to gmldap.oraclecorp.com server??
Thanks,
Swaroop

See Task 3 in the Section 9.4 of the Oracle Application Server Administrator's Guide:
http://download-west.oracle.com/docs/cd/B14099_17/core.1012/b13995/chginfra.htm#i1014978
See the following for information about what to specify on each page.
http://download-west.oracle.com/docs/cd/B14099_17/core.1012/b13995/reconfig.htm#i1013341

SSO requires double login for partner application

I'm having some trouble with SSO partner applications, when I login to a SSO protected application, the login works fine, but when I try to navigate to another application I'm presented with the login page again, the sso cookie seems to be working since clicking on the login button without entering the user credentials works. For example, I log in to portal and from there I navigate to a forms application that is on the same server and the same port (portal: https://apps.mydomain.com:4444/pls/portal --> forms: https://apps.mydomain.com/forms/frmservlet?config=app) I am presented with the login page and after clicking on the login button without entering any information everything works fine. This is happening for all the middle tiers that are connected to the same OID. Any ideas on what can be wrong on my configuration?

Hi Andrey,
The problem sounds really wierd.
Can you check your SSO settings for your Portal ECC system? I mean, please check the User Management/Administration properties in your System Adminstration of Portal System that points to ECC.
Regards
<i><b>Raja Sekhar</b></i>

SSO userid for a partner application

Hi,
We have one application deployed on WebLogic Application Server this is registred as Partner application over SSO server.
On application side we have installed Oracle HTTP Server as webserver and configured mod_osso.
Now when user attempt to access any secured page SSO askes for the authentication. And on successful login user landed back to application page configured while creating Partner application.
After login we need userid of user who logged in on sso server. I have tried following and getting null.
Remote User: <%=request.getRemoteUser() %>,
     Proxy-Remote-User: <%=request.getHeader("Proxy-Remote-User") %>
     Osso-User-Dn: <%=request.getHeader("Osso-User-Dn") %>
     Osso-User-Guid: <%=request.getHeader("Osso-User-Guid") %>
     Osso-Subscriber: <%=request.getHeader("Osso-Subscriber") %>
     Osso-Subscriber-Dn: <%=request.getHeader("Osso-Subscriber-Dn") %>
     Osso-Subscriber-Guid: <%=request.getHeader("Osso-Subscriber-Guid") %>
     Accept-Language: <%=request.getHeader("Accept-Language") %>
output:
Remote User: null,
Proxy-Remote-User: null
Osso-User-Dn: null
Osso-User-Guid: null
Osso-Subscriber: null
Osso-Subscriber-Dn: null
Osso-Subscriber-Guid: null
Accept-Language: en-us,en;q=0.5
Is any one there knows, what exactly i should do?
Thanks & Regards,
Kevin Chheda

So the user has successfully authenticated and can access protected areas of the application?
Have you tried using Http headers to see values/attribute names?
Can you try this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<body>
<%@ page import = "java.util.*" %>
<h1>Headers received:</h1>
Remote user header is: <% out.println(request.getRemoteUser()); %>
<p>
<table>
<%
Enumeration headerNames = request.getHeaderNames();
while(headerNames.hasMoreElements()) {
String headerName = (String)headerNames.nextElement();
out.println("<tr><td>" + headerName);
out.println(" <td>" + request.getHeader(headerName));
%>
</table>
</body></html>

Sso session timeout per partner application

Hello,
I was just wondering if it is possible to configure SSO session timeouts per partner application? I'm looking to log out users of a particular application after 15 minutes, but don't want this change to affect any of my other SSO enabled applications. Is this possible?
Thanks,

Hi,
I do not think so, you can not specify specail parameter for one application in SSO.
Why because SSO is one component (within your Infra) through which you logon different apps.
Another solution may be it will expensive is that you 'll need to use different infra for this specific application.
Regards,
Hamdy

Partner Application Registration

When using the Administer Partner Applications page, it appears the application is not being registered completely. The information does not appear in the WWSEC_ENABLER_CONFIG_INFO$ table, as has been suggested in prior posts (everything is fine in WWSSO_PAPP_CONFIGURATION_INFO$).
I am attempting to deploy the SSO SDK demo PL/SQL application, which works fine when logged into Portal. However, when not logged into Portal, I receive the following errors:
"Error in application: missing application registration information
Please register this application as described in installation guide"
This error is driven by the PL/SQL exception:
"wwsec_sso_enabler_private.enabler_config_not_found"
What am I missing? I have created several Partner applications, and none of them appear in the WWSEC_ENABLER_CONFIG_INFO$ table. I have sucessfully loaded the SSOHash into my partner schemas.
Environment:
Win2000
Portal 3.0.7
Thanks in advance...
Dean

Paul,
Thanks for the info; however, I'm still unable to get the SSO SDK sample, or any partner app, to work.
I have read the docs, what little there is, and followed the steps closely. Everything executes ok.
I have several questions:
1. When executing the REGAPP.SQL script that comes with the SDK, it indicates to login as the partner schema. I have noticed when running this script, the entry is stored in the partner schema table WWSEC_ENABLER_CONFIG_INFO$, not the one owned by Portal. Is this correct?
2. My partner app is really a PL/SQL Server Page (PSP) application which uses the same server as Portal. When entering the Listener Token name, I have been using the same server name as Portal. Is this a problem? What is this token used for? Must it be unique for each partner application?
3. In your response you mentioned changes to the REGAPP script. I found no mention of any changes in the docs with SSO SDK. Am I missing something?
Finally, is there any better documentation for the SDK and/or partner application configuration. The readme and install files do not, in my opinion, pass as documentation.
Thanks...
Dean

Partner Application written in other language than PL/SQL and Java

I have an application written in another language than PL/SQL or Java. I want to integrate this application as an Partner apps where I use the same user repository as Portal.
Can I integrate the application by calling a stored PL/SQL-procedure based on the PLSQL SSO APIs examples that authenticates the user based on the username/password in portal and redirects the user to the application ?
Are there any examples / references where this has been done ?
Jens

Check out the PDK referance for URL-Services, which allow you to integrate with any web based service/content.
http://portalstudio.oracle.com/servlet/page?_pageid=350&_dad=ops&_schema=OPSTUDIO

Partner application single sign-on and Oc4j

hello,
I'm trying to test portal's partner application single sign-on, following the examples inside the "Oracle9 iAS Single Sign-On Application Developers Guide":
With Tomcat as jsp engine everything works fine, but with Oc4j when I try to enter the protected jsp page i have this exception:
oracle.security.sso.enabler.SSOEnablerException: java.lang.IllegalStateException: OutputStream already retrieved
     at SSOEnablerBean.getSSOUserInfo(SSOEnablerBean.java:153)
     at SSOEnablerJspBean.getSSOUserInfo(SSOEnablerJspBean.java:57)
     at /protetta.jsp._jspService(/protetta.jsp.java:37) (JSP page line 4)
Any suggestion?
Thanks in advance.

I get the same problem with my partner application. It runs fine on JServer but I get the following problem on oc4j:
oracle.security.sso.enabler.SSOEnablerException: java.lang.IllegalStateException: OutputStream already retrieved
at oracle.br.aerochain.sso.SSOEnablerBean.getSSOUserInfo(SSOEnablerBean.java, Compiled Code)
at oracle.br.aerochain.sso.SSOEnablerJspBean.getSSOUserInfo(SSOEnablerJspBean.java, Compiled Code)
at /jsp/papp.jsp._jspService(/jsp/papp.jsp.java, Compiled Code)
at com.orionserver[Oracle9iAS (9.0.2.0.0) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpApplication.serviceJSP(HttpApplication.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.JSPServlet.service(JSPServlet.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java, Compiled Code)     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java, Compiled Code)
Did anyone get a solution for this?
TIA

Partner Application in release 2

Hello,
I have to create a new PL/SQL partner application in the release 902.
Where is the new sso sdk for the new Portal release?
In the new pdk seems that it is the same of the 309 release (ssosdk307_032101 or ssosdk307)...
And the pl/sql example code in the Oracle9 iAS Single Sign-On Application Developers Guide is not working...
Can someone give me some feedback?
Thank you and regards,
Lorenzo.

Lorenzo,
Did you get any feedback on this posting? I'm also working with Release 2 (9.0.2) and is just about to start implementing the Java SSO SDK. The latest release of SSO SDK I've found is 307. According to the documentation this version supports SSO server 3.0.6 to 3.0.8, thus not Release 2. Please reply if you have any news regarding SSO SDK for Release 2.
Best Regards,
Rikard

Partner application logoff not working

We have a partner application registered with sso with custom login screen. The login works fine. We use the following code to logoff the partner application in logoff.jsp
response.setHeader("Osso-Return-Url", "http://my.oracle.com" );
response.sendError(470, "Oracle SSO");
session.invalidate();
but the logoff is not working properly. It is not invalidating the session and the logout http request is not going from the application server to the sso server.
Are there any additional configurations for SSO logoff.Any help is appreciated.
Thanks

Hi
The WF should also trigger if i add the Partner function in UI.If i change any Attribute the WF triggers but i dont want to change the attribute when i add the partner function.
If i have only one event for WF that is Partner Change the WF will not trigger it for the 1st time when i save the UI. But next i come to the same saved doc and add a partner function then the Wf triggers.
So this means that Partner change is active.
the issue here is i need to trigger the WF on , the 1st time i save the UI, for which i wil be using Attribute Change and next time when i come back to saved doc the and add only the partner function and no changes are made to attributes the WF should again trigger.
Thanks
Tarmeem

Partner application and web clipping.

Hi All,
I am trying to add an external application (say my.yahoo.com) to a webclipping and its throwing the below error in the application log.
WC-517 : SSL handshake failed with the url ...
I have checked the file ca-bundle.crt and the certificates are in place. Does anybody know how to go about debugging this problem as I am quite new to portals and at my wits end to solve it.
Also I would be greatful if anybody can suggest me the steps on adding an Apex application configured as partner application with SSO authentication to a web clipping.There seems to be little or no-documentation at all in this regard(as far as my search goes).
Thanks in advance
-Venkat

I finally got it working by VERY CAREFULLY reading the instructions in the install.txt document in the SSO SDK package. You have to set up the partner application with a new schema in the login server database, and run the regapp.sql script AFTER editing it to insert data from the Login Server Partner Application admin screen. After you register the partner app in Portal, it gives you some info (site token, listener token, encryption key, etc). You have to MANUALLY copy these and paste them into the regapp.sql script, then run the script in the partner app schema. Make sure you don't confuse capital I with numeral 1 (like I did, since Oracle so nicely uses a non-serif font where you can not tell the difference).
Also make sure you copy the exact values for these parameters into your code when you use the SSOEnabler class. The listener token was very confusing since different documents appear to disagree on whether it should include the partner app name or not. It does require the partner app name:
app-name:hostname:port
hostname and port are for the web server that is handling http requests for the login server (usually your main portal web server).
John H.

Partner application configuration is missing error on SSO login page

We have APEX 3.1.2 setup as a partner application and an application within APEX setup to use SSO for authentication. Following a link to the APEX application redirects to the Single Sign-On page, as it should, but it also shows "Error: The partner application configuration is missing or expired." I type in my password and username, click the Login button, and (if I entered my username and password correctly, of course!) then the APEX application is shown. So, I cannot figure out why we're getting the no_papp_err error and I have not found any solutions to that issue on Metalink or anywhere else on the Internet. Any ideas? I'm concerned that we have a misconfiguration somewhere that is causing this error and will affect any other partner application we setup in the future.
We're on Oracle Portal 10.1.4, SSO 10.1.2, and SSL is setup on both infra and mid tiers.

Did you try checking the partner application entries on the SSO-login server page?
please login as orcladmin or some other user with membership in, i beleive, iasadmins group. verify that for this partner application, what you see here corresponds to the application URL. it looks like your login page call may have issues. so check for login url too.
also check the ORASSO.WWSSO_LS_CONFIGURATION_INFO$ for entries corresponding to Apex application.

Partner furnction in bi

Similar Messages

Maybe you are looking for